blob: 37e2e570935baa62af250c7830c40ab1dc0126a7 [file] [log] [blame]
SUMMARY = "Linux kernel firmware files from Raspbian distribution"
DESCRIPTION = "Updated firmware files for RaspberryPi hardware. \
RPi-Distro obtains these directly from Cypress; they are not submitted \
to linux-firmware for general use."
HOMEPAGE = "https://github.com/RPi-Distro/firmware-nonfree"
SECTION = "kernel"
# In maintained upstream linux-firmware:
# * brcmfmac43430-sdio falls under LICENCE.cypress
# * brcmfmac43455-sdio falls under LICENCE.broadcom_bcm43xx
# * brcmfmac43456-sdio falls under LICENCE.broadcom_bcm43xx
#
# It is likely[^1] that both of these should be under LICENCE.cypress.
# Further, at this time the text of LICENCE.broadcom_bcm43xx is the same
# in linux-firmware and RPi-Distro/firmware-nonfree, but this may
# change.
#
# Rather than make assumptions about what's supposed to be what, we'll
# use the license implied by the source of these files, named to avoid
# conflicts with linux-firmware.
#
# [^1]: https://github.com/RPi-Distro/bluez-firmware/issues/1
LICENSE = "\
Firmware-broadcom_bcm43xx-rpidistro \
& WHENCE \
"
LIC_FILES_CHKSUM = "\
file://LICENCE.broadcom_bcm43xx;md5=3160c14df7228891b868060e1951dfbc \
file://WHENCE;md5=7b12b2224438186e4c97c4c7f3a5cc28 \
"
# These are not common licenses, set NO_GENERIC_LICENSE for them
# so that the license files will be copied from fetched source
NO_GENERIC_LICENSE[Firmware-broadcom_bcm43xx-rpidistro] = "LICENCE.broadcom_bcm43xx"
NO_GENERIC_LICENSE[WHENCE] = "WHENCE"
SRC_URI = "git://github.com/RPi-Distro/firmware-nonfree"
SRCREV = "83938f78ca2d5a0ffe0c223bb96d72ccc7b71ca5"
PV = "20190114-1+rpt11"
S = "${WORKDIR}/git"
inherit allarch
CLEANBROKEN = "1"
do_compile() {
:
}
do_install() {
install -d ${D}${nonarch_base_libdir}/firmware/brcm
cp ./LICENCE.broadcom_bcm43xx ${D}${nonarch_base_libdir}/firmware/LICENCE.broadcom_bcm43xx-rpidistro
# Replace outdated linux-firmware files with updated ones from
# raspbian firmware-nonfree. Raspbian adds blobs and nvram
# definitions that are also necessary so copy those too.
for fw in brcmfmac43430-sdio brcmfmac43455-sdio brcmfmac43456-sdio ; do
install -m 0644 brcm/${fw}.* ${D}${nonarch_base_libdir}/firmware/brcm/
done
# add compat links. Fixes errors like
# brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt failed with error -2
ln -s brcmfmac43455-sdio.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt
ln -s brcmfmac43455-sdio.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43455-sdio.raspberrypi,3-model-b-plus.txt
ln -s brcmfmac43430-sdio.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.raspberrypi,3-model-b.txt
ln -s brcmfmac43430-sdio.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.raspberrypi,model-zero-w.txt
}
PACKAGES = "\
${PN}-broadcom-license \
${PN}-bcm43430 \
${PN}-bcm43455 \
${PN}-bcm43456 \
"
LICENSE:${PN}-bcm43430 = "Firmware-broadcom_bcm43xx-rpidistro"
LICENSE:${PN}-bcm43455 = "Firmware-broadcom_bcm43xx-rpidistro"
LICENSE:${PN}-bcm43456 = "Firmware-broadcom_bcm43xx-rpidistro"
LICENSE:${PN}-broadcom-license = "Firmware-broadcom_bcm43xx-rpidistro"
FILES:${PN}-broadcom-license = "${nonarch_base_libdir}/firmware/LICENCE.broadcom_bcm43xx-rpidistro"
FILES:${PN}-bcm43430 = "${nonarch_base_libdir}/firmware/brcm/brcmfmac43430*"
FILES:${PN}-bcm43455 = "${nonarch_base_libdir}/firmware/brcm/brcmfmac43455*"
FILES:${PN}-bcm43456 = "${nonarch_base_libdir}/firmware/brcm/brcmfmac43456*"
RDEPENDS:${PN}-bcm43430 += "${PN}-broadcom-license"
RDEPENDS:${PN}-bcm43455 += "${PN}-broadcom-license"
RDEPENDS:${PN}-bcm43456 += "${PN}-broadcom-license"
RCONFLICTS:${PN}-bcm43430 = "\
linux-firmware-bcm43430 \
linux-firmware-raspbian-bcm43430 \
"
RREPLACES:${PN}-bcm43430 = "\
linux-firmware-bcm43430 \
linux-firmware-raspbian-bcm43430 \
"
RCONFLICTS:${PN}-bcm43455 = "\
linux-firmware-bcm43455 \
linux-firmware-raspbian-bcm43455 \
"
RREPLACES:${PN}-bcm43455 = "\
linux-firmware-bcm43455 \
linux-firmware-raspbian-bcm43455 \
"
RCONFLICTS:${PN}-bcm43456 = "\
linux-firmware-bcm43456 \
linux-firmware-raspbian-bcm43456 \
"
RREPLACES:${PN}-bcm43456 = "\
linux-firmware-bcm43456 \
linux-firmware-raspbian-bcm43456 \
"
# Firmware files are generally not run on the CPU, so they can be
# allarch despite being architecture specific
INSANE_SKIP = "arch"