Gitiles
Code Review Sign In
gerrit.openbmc.org / openbmc / openbmc / 2690b0b5f7c0d23037312d4d1a45c4bf2ab71df7
commit2690b0b5f7c0d23037312d4d1a45c4bf2ab71df7[log] [tgz]
authorJoel Stanley <joel@jms.id.au>Mon Sep 16 04:35:32 2019 +0100
committerBrad Bishop <bradleyb@fuzziesquirrel.com>Tue Sep 17 07:21:28 2019 -0400
tree9589bc6182ed7d9984f531e83c15dd72acae19fe
parente43b2038ebe7157d62bd270890f9dd81abaace3b [diff]
linux-aspeed: Move to v5.3

This moves the OpenBMC kernel to a Linux v5.3 base.

There are 120 patches in dev-5.3. Of these, 56 are backported from
upstream, leaving 64 out of tree patches.

Alexander Amelkin (1):
      mtd: spi-nor: fix options for mx66l51235f

Andrew Jeffery (26):
      ARM: dts: aspeed: Describe SD controllers
      ARM: dts: aspeed: Enable first MMC slot on AST2500 EVB
      ARM: dts: aspeed: Add AST2600 pinmux nodes
      net: phy: Add mdio-aspeed
      net: ftgmac100: Add support for DT phy-handle property
      net: ftgmac100: Select ASPEED MDIO driver for the AST2600
      pinctrl: aspeed: Rename pin declaration macros
      pinctrl: aspeed: Add PIN_DECL_3() helper
      pinctrl: aspeed: Add multiple pin group support for functions
      pinctrl: aspeed: Add SIG_DESC_CLEAR() helper
      pinctrl: aspeed: Add AST2600 pinmux support
      pinctrl: aspeed: Document existence of deprecated compatibles
      mmc: sdhci-of-aspeed: Add support for the ASPEED SD controller
      mmc: sdhci-of-aspeed: Drop redundant assignment to host->clock
      mmc: sdhci-of-aspeed: Uphold clocks-on post-condition of set_clock()
      mmc: sdhci-of-aspeed: Allow max-frequency limitation of SDCLK
      mmc: sdhci-of-aspeed: Depend on CONFIG_OF_ADDRESS
      dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation
      pmbus (max31785): Add support for devicetree configuration
      pmbus (core): One-shot retries for failure to set page
      pmbus (core): Use driver callbacks in pmbus_get_fan_rate()
      pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers
      soc: aspeed: Miscellaneous control interfaces
      ARM: dts: aspeed: witherspoon: Update max31785 node
      ARM: dts: aspeed-g5: Expose VGA and SuperIO scratch registers
      ARM: dts: ast2600-evb: eMMC configuration

Andrew Peng (1):
      ARM: dts: aspeed: Add Lenovo Hr855xg2 BMC

Ben Pai (1):
      ARM: dts: aspeed: Add Mihawk BMC platform

Cédric Le Goater (11):
      mtd: spi-nor: aspeed: use command mode for reads
      mtd: spi-nor: aspeed: add support for SPI dual IO read mode
      mtd: spi-nor: aspeed: link controller with the ahb clock
      mtd: spi-nor: aspeed: optimize read mode
      mtd: spi-nor: aspeed: limit the maximum SPI frequency
      /dev/mem: add a devmem kernel parameter to activate the device
      ARM: dts: aspeed: Add "spi-max-frequency" property
      mtd: spi-nor: aspeed: introduce a aspeed_smc_default_read() helper
      mtd: spi-nor: aspeed: clarify 4BYTE address mode mask
      mtd: spi-nor: aspeed: use memcpy_fromio() to capture the optimization buffer
      mtd: spi-nor: aspeed: add support for the 4B opcodes

David S. Miller (1):
      ftgmac100: Fix build.

Eddie James (4):
      ARM: dts: aspeed: swift: Change power supplies to version 2
      pmbus: (ibm-cffps) Add support for version 2 of the PSU
      i2c: aspeed: Add AST2600 compatible
      ARM: dts: aspeed: tacoma: Enable I2C busses

Fran Hsu (4):
      ARM: dts: nuvoton: Add NPCM730 common device tree
      ARM: dts: nuvoton: Add Quanta GSJ BMC pinctrl
      ARM: dts: nuvoton: Add Quanta GSJ BMC Device Tree.
      ARM: dts: nuvoton: Add GPIOs and LEDs to GSJ device tree

George Hung (2):
      dt-binding: edac: add NPCM ECC documentation
      edac: npcm: Add Nuvoton NPCM7xx EDAC driver

Hongwei Zhang (1):
      ARM: dts: aspeed: Add SGPM pinmux

Ivan Mikhaylov (2):
      ARM: dts: aspeed: vesnin: Add wdt2 with alt-boot option
      ARM: dts: aspeed: vesnin: Add secondary SPI flash chip

Jae Hyun Yoo (11):
      dt-bindings: Add a document of PECI subsystem
      peci: Add support for PECI bus driver core
      dt-bindings: Add a document of PECI adapter driver for ASPEED AST24xx/25xx SoCs
      peci: Add a PECI adapter driver for Aspeed AST24xx/AST25xx
      dt-bindings: mfd: Add a document for PECI client MFD
      mfd: intel-peci-client: Add PECI client MFD driver
      Documentation: hwmon: Add documents for PECI hwmon client drivers
      hwmon: Add PECI cputemp driver
      hwmon: Add PECI dimmtemp driver
      Add maintainers for the PECI subsystem
      ARM: dts: aspeed: peci: Add PECI node

Joel Stanley (19):
      ARM: aspeed: Select timer in each SoC
      ARM: aspeed: Add ASPEED AST2600 architecture
      ARM: aspeed: Enable SMP boot
      ARM: configs: aspeed: Refresh defconfigs
      ARM: configs: aspeed_g5: Enable AST2600
      ARM: dts: aspeed: swift: Add eMMC device
      ARM: dts: aspeed-g4: Add all flash chips
      ARM; dts: aspeed: mihawk: File should not be executable
      clk: aspeed: Add SDIO gate
      clk: aspeed: Move structures to header
      clk: Add support for AST2600 SoC
      ARM: dts: aspeed: Add AST2600 and EVB
      ARM: dts: aspeed-g4: Expose SuperIO scratch registers
      fsi: Add ast2600 master driver
      ARM: dts: aspeed-g6: Describe FSI masters
      ARM: dts: aspeed: ast2600evb: Enable FSI master
      ARM: dts: aspeed: Add Tacoma machine
      ARM: config: aspeed: Update defconfigs
      ARM: dts: aspeed-g6: Add i2c buses

John Wang (1):
      ARM: dts: aspeed: fp5280g2: Fix power supply address

Linus Walleij (3):
      gpio: aspeed: Pass irqchip when adding gpiochip
      gpio: tqmx86: Pass irqchip when adding gpiochip
      gpio: Initialize the irqchip valid_mask with a callback

Matt Spinler (1):
      ARM: dts: aspeed: swift: Fix FSI GPIOs

Nathan Chancellor (1):
      pinctrl: aspeed: g6: Remove const specifier from aspeed_g6_sig_expr_set's ctx parameter

Oscar A Perez (1):
      ARM: dts: aspeed-g5: Fixe gpio-ranges upper limit

Rashmica Gupta (5):
      gpio/aspeed: Fix incorrect number of banks
      gpio: aspeed: Setup irqchip dynamically
      gpio: aspeed: Use ngpio property from device tree if available
      gpio: aspeed: Add in ast2600 details to Aspeed driver
      ARM: dts: aspeed-g6: Add gpio devices

Ryan Chen (1):
      watchdog: aspeed: Add support for AST2600

Tao Ren (3):
      ARM: dts: aspeed: Add Facebook Minipack BMC
      ARM: dts: aspeed: Add Facebook Wedge40 BMC
      ARM: dts: aspeed: Add Facebook Wedge100 BMC

Tomer Maimon (15):
      dt-binding: spi: add NPCM FIU controller
      spi: npcm-fiu: add NPCM FIU controller driver
      clk: nuvoton: add npcm750 clock function prototype initialization
      dt-bindings: i2c: npcm7xx: add binding for i2c controller
      i2c: npcm: driver for Poleg i2c controller
      dt-binding: bmc: Add NPCM7xx LPC BPC documentation
      misc: npcm7xx-lpc-bpc: add NPCM7xx BIOS post code driver
      dt-binding: bmc: add npcm7xx pci mailbox document
      misc: mbox: add npcm7xx pci mailbox driver
      dt-binding: net: document NPCM7xx EMC DT bindings
      net: npcm: add NPCM7xx Ethernet MAC controller
      dt-binding: peci: add NPCM PECI documentation
      peci: npcm: add NPCM PECI driver
      ARM: configs: add defconfig for Nuvoton NPCM7xx BMC
      ARM: dts: npcm7xx: Update device tree

Vijay Khemka (3):
      ARM: dts: aspeed: tiogapass: Add VR devices
      ARM: dts: aspeed: tiogapass: Move battery sensor
      ARM: dts: aspeed: tiogapass: Add Riser card

Wei Yongjun (1):
      mmc: sdhci-of-aspeed: Fix return value check in aspeed_sdc_probe()

William A. Kennington III (1):
      ARM: configs: aspeed: Enable commonly used network functionality

(From meta-aspeed rev: cacd5220e022dbe97ce6679838407565ed5f5df5)

Change-Id: Ic30ef008a68198c0e0c5a3764b356b7f7c59b2db
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
1 file changed
tree: 9589bc6182ed7d9984f531e83c15dd72acae19fe
  1. .github/
  2. meta-arm/
  3. meta-aspeed/
  4. meta-evb/
  5. meta-facebook/
  6. meta-google/
  7. meta-hxt/
  8. meta-ibm/
  9. meta-ingrasys/
  10. meta-inspur/
  11. meta-intel/
  12. meta-inventec/
  13. meta-lenovo/
  14. meta-mellanox/
  15. meta-microsoft/
  16. meta-nuvoton/
  17. meta-openembedded/
  18. meta-openpower/
  19. meta-phosphor/
  20. meta-portwell/
  21. meta-qualcomm/
  22. meta-quanta/
  23. meta-raspberrypi/
  24. meta-security/
  25. meta-x86/
  26. meta-xilinx/
  27. meta-yadro/
  28. poky/
  29. bitbake ⇨ poky/bitbake/
  30. LICENSE ⇨ poky/LICENSE
  31. meta ⇨ poky/meta
  32. meta-poky ⇨ poky/meta-poky/
  33. meta-skeleton ⇨ poky/meta-skeleton
  34. oe-init-build-env ⇨ poky/oe-init-build-env
  35. scripts ⇨ poky/scripts/
  36. .gitignore
  37. .gitreview
  38. .templateconf
  39. MAINTAINERS
  40. openbmc-env
  41. README.md
  42. setup
README.md

OpenBMC

Build Status

The OpenBMC project can be described as a Linux distribution for embedded devices that have a BMC; typically, but not limited to, things like servers, top of rack switches or RAID appliances. The OpenBMC stack uses technologies such as Yocto, OpenEmbedded, systemd, and D-Bus to allow easy customization for your server platform.

Setting up your OpenBMC project

1) Prerequisite

  • Ubuntu 14.04
sudo apt-get install -y git build-essential libsdl1.2-dev texinfo gawk chrpath diffstat
  • Fedora 28
sudo dnf install -y git patch diffstat texinfo chrpath SDL-devel bitbake \
    rpcgen perl-Thread-Queue perl-bignum perl-Crypt-OpenSSL-Bignum
sudo dnf groupinstall "C Development Tools and Libraries"

2) Download the source

git clone git@github.com:openbmc/openbmc.git
cd openbmc

3) Target your hardware

Any build requires an environment variable known as TEMPLATECONF to be set to a hardware target. You can see all of the known targets with find meta-* -name local.conf.sample. Choose the hardware target and then move to the next step. Additional examples can be found in the OpenBMC Cheatsheet

MachineTEMPLATECONF
Palmettometa-ibm/meta-palmetto/conf
Zaiusmeta-ingrasys/meta-zaius/conf
Witherspoonmeta-ibm/meta-witherspoon/conf
Romulusmeta-ibm/meta-romulus/conf

As an example target Palmetto

export TEMPLATECONF=meta-ibm/meta-palmetto/conf

4) Build

. openbmc-env
bitbake obmc-phosphor-image

Additional details can be found in the docs repository.

Build Validation and Testing

Commits submitted by members of the OpenBMC GitHub community are compiled and tested via our Jenkins server. Commits are run through two levels of testing. At the repository level the makefile make check directive is run. At the system level, the commit is built into a firmware image and run with an arm-softmmu QEMU model against a barrage of CI tests.

Commits submitted by non-members do not automatically proceed through CI testing. After visual inspection of the commit, a CI run can be manually performed by the reviewer.

Automated testing against the QEMU model along with supported systems are performed. The OpenBMC project uses the Robot Framework for all automation. Our complete test repository can be found here.

Submitting Patches

Support of additional hardware and software packages is always welcome. Please follow the contributing guidelines when making a submission. It is expected that contributions contain test cases.

Bug Reporting

Issues are managed on GitHub. It is recommended you search through the issues before opening a new one.

Features of OpenBMC

Feature List

  • Host management: Power, Cooling, LEDs, Inventory, Events, Watchdog
  • Full IPMI 2.0 Compliance with DCMI
  • Code Update Support for multiple BMC/BIOS images
  • Web-based user interface
  • REST interfaces
  • D-Bus based interfaces
  • SSH based SOL
  • Remote KVM
  • Hardware Simulation
  • Automated Testing

Features In Progress

  • OpenCompute Redfish Compliance
  • User management
  • Virtual media
  • Verified Boot

Features Requested but need help

  • OpenBMC performance monitoring

Finding out more

Dive deeper into OpenBMC by opening the docs repository.

Contact