Yocto 2.5
Move OpenBMC to Yocto 2.5(sumo)
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
Change-Id: I5c5ad6904a16e14c1c397f0baf10c9d465594a78
diff --git a/import-layers/meta-openembedded/meta-oe/recipes-support/hddtemp/hddtemp/hddtemp_0.3-beta15-52.diff b/import-layers/meta-openembedded/meta-oe/recipes-support/hddtemp/hddtemp/hddtemp_0.3-beta15-52.diff
index f61c164..057b1fd 100644
--- a/import-layers/meta-openembedded/meta-oe/recipes-support/hddtemp/hddtemp/hddtemp_0.3-beta15-52.diff
+++ b/import-layers/meta-openembedded/meta-oe/recipes-support/hddtemp/hddtemp/hddtemp_0.3-beta15-52.diff
@@ -8,9 +8,11 @@
Upstream-Status: unmaintained
+Index: hddtemp-0.3-beta15/doc/hddtemp.8
+===================================================================
--- hddtemp-0.3-beta15.orig/doc/hddtemp.8
+++ hddtemp-0.3-beta15/doc/hddtemp.8
-@@ -58,6 +58,10 @@
+@@ -58,6 +58,10 @@ Execute hddtemp in TCP/IP daemon mode (p
.B \-f, \-\-file=\fIfile\fI
Specify the database file to use.
.TP
@@ -21,7 +23,7 @@
.B \-l, \-\-listen=\fIaddr\fR
Listen on a specific address. \fIaddr\fR is a string containing a
host name or a numeric host address string. The numeric host address
-@@ -80,6 +84,9 @@
+@@ -80,6 +84,9 @@ seconds.
.B \-q, \-\-quiet
Don't check if the drive is supported.
.TP
@@ -31,7 +33,7 @@
.B \-v, \-\-version
Display hddtemp version number.
.TP
-@@ -96,7 +103,7 @@
+@@ -96,7 +103,7 @@ Listen on IPv6 sockets only.
.SH "DRIVE DATABASE"
If you know your drive has a temperature sensor but it is being
reported unsupported, tell me which model and which manufacturer it
@@ -40,7 +42,7 @@
line of hddtemp.db is either a comment, a blank line or a line
containing:
.TP
-@@ -112,7 +119,7 @@
+@@ -112,7 +119,7 @@ set of drives from its model name or fro
Feedback is welcome (see the REPORT section below).
.SH "TCP/IP DAEMON MODE"
@@ -49,7 +51,7 @@
.PP
# hddtemp SATA:/dev/sda PATA:/dev/hda
.PP
-@@ -120,7 +127,7 @@
+@@ -120,7 +127,7 @@ To test
.B hddtemp
in daemon mode, start it like this:
.PP
@@ -58,7 +60,7 @@
.PP
.PP
and use
-@@ -165,8 +172,8 @@
+@@ -165,8 +172,8 @@ and 12 are often reported to match a tem
investigation they do not. But fields 194 (which is the standard
field for temperature) and 231 are good candidates.
.PP
@@ -69,13 +71,15 @@
yourself.
.SH "BUGS"
-@@ -183,5 +190,5 @@
+@@ -183,5 +190,5 @@ supported on i386 architectures only.
.PP
Emmanuel Varagnat (hddtemp@guzu.net).
.PP
-This manual page was originaly written by Aurelien Jarno <aurel32@debian.org>,
+This manual page was originally written by Aurelien Jarno <aurel32@debian.org>,
for the Debian GNU/Linux system (but may be used by others).
+Index: hddtemp-0.3-beta15/po/fr.po
+===================================================================
--- hddtemp-0.3-beta15.orig/po/fr.po
+++ hddtemp-0.3-beta15/po/fr.po
@@ -7,9 +7,9 @@
@@ -91,7 +95,7 @@
"Last-Translator: Aurelien Jarno <aurelien@aurel32.net>\n"
"Language-Team: FRANCAIS <fr@li.org>\n"
"MIME-Version: 1.0\n"
-@@ -17,23 +17,7 @@
+@@ -17,23 +17,7 @@ msgstr ""
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.0.1\n"
@@ -116,7 +120,7 @@
#, c-format
msgid ""
"\n"
-@@ -46,7 +30,7 @@
+@@ -46,7 +30,7 @@ msgstr ""
"Modèle: %s\n"
"\n"
@@ -125,7 +129,7 @@
#, c-format
msgid ""
"WARNING: Drive %s doesn't seem to have a temperature sensor.\n"
-@@ -60,75 +44,60 @@
+@@ -60,75 +44,60 @@ msgstr ""
"net).\n"
"ATTENTION : Voir les options --help, --debug et --drivebase.\n"
@@ -216,7 +220,7 @@
" -b --drivebase : display database file content that allow hddtemp to\n"
" recognize supported drives.\n"
" -D --debug : display various S.M.A.R.T. fields and their values.\n"
-@@ -138,6 +107,7 @@
+@@ -138,6 +107,7 @@ msgid ""
" -d --daemon : run hddtemp in TCP/IP daemon mode (port %d by "
"default.)\n"
" -f --file=FILE : specify database file to use.\n"
@@ -224,7 +228,7 @@
" -l --listen=addr : listen on a specific interface (in TCP/IP daemon "
"mode).\n"
" -n --numeric : print only the temperature.\n"
-@@ -145,6 +115,8 @@
+@@ -145,6 +115,8 @@ msgid ""
" -s --separator=C : separator to use between fields (in TCP/IP daemon "
"mode).\n"
" -S --syslog=s : log temperature to syslog every s seconds.\n"
@@ -233,7 +237,7 @@
" -q --quiet : do not check if the drive is supported.\n"
" -v --version : display hddtemp version number.\n"
" -w --wake-up : wake-up the drive if need.\n"
-@@ -153,11 +125,14 @@
+@@ -153,11 +125,14 @@ msgid ""
"\n"
"Report bugs or new drives to <hddtemp@guzu.net>.\n"
msgstr ""
@@ -249,7 +253,7 @@
" -b --drivebase : affiche le contenu du fichier de base de donnée "
"qui \n"
" permet à hddtemp de reconnaître les lecteurs "
-@@ -172,6 +147,7 @@
+@@ -172,6 +147,7 @@ msgstr ""
"défaut).\n"
" -f --file=FILE : specifie le fichier à utiliser comme base de "
"données.\n"
@@ -257,7 +261,7 @@
" -l --listen=addr : écoute sur une interface spécifique (en mode démon "
"TCP/IP).\n"
" -n --numeric : affiche seulement la température.\n"
-@@ -180,6 +156,8 @@
+@@ -180,6 +156,8 @@ msgstr ""
"démon TCP/IP).\n"
" -S --syslog=s : enregistre la température dans syslog tous les s "
"secondes.\n"
@@ -266,7 +270,7 @@
" -q --quiet : ne vérifie pas si le lecteur est supporté.\n"
" -v --version : affiche la version de hddtemp.\n"
" -w --wake-up : réveiller le lecteur si nécessaire.\n"
-@@ -188,62 +166,95 @@
+@@ -188,62 +166,95 @@ msgstr ""
"\n"
"Report bugs or new drives to <hddtemp@guzu.net>.\n"
@@ -377,6 +381,8 @@
+
+#~ msgid "field(%d)\t = %d\n"
+#~ msgstr "champ(%d)\t = %d\n"
+Index: hddtemp-0.3-beta15/po/ru.po
+===================================================================
--- hddtemp-0.3-beta15.orig/po/ru.po
+++ hddtemp-0.3-beta15/po/ru.po
@@ -6,8 +6,8 @@
@@ -390,7 +396,7 @@
"PO-Revision-Date: 2003-03-08 16:42+0300\n"
"Last-Translator: Michael Shigorin <mike@altlinux.ru>\n"
"Language-Team: Russian <ru@li.org>\n"
-@@ -15,23 +15,7 @@
+@@ -15,23 +15,7 @@ msgstr ""
"Content-Type: text/plain; charset=koi8-r\n"
"Content-Transfer-Encoding: 8bit\n"
@@ -415,7 +421,7 @@
#, c-format
msgid ""
"\n"
-@@ -40,7 +24,7 @@
+@@ -40,7 +24,7 @@ msgid ""
"\n"
msgstr ""
@@ -424,7 +430,7 @@
#, c-format
msgid ""
"WARNING: Drive %s doesn't seem to have a temperature sensor.\n"
-@@ -53,72 +37,59 @@
+@@ -53,72 +37,59 @@ msgstr ""
"÷îéíáîéå: åÓÌÉ ×Ù ÔÏÞÎÏ ÚÎÁÅÔÅ, ÞÔÏ ÄÁÔÞÉË ÅÓÔØ, ÎÁÐÉÛÉÔÅ hddtemp@guzu.net\n"
"÷îéíáîéå: (ÓÍ. ÏÐÃÉÉ --help, --debug É --drivebase).\n"
@@ -512,7 +518,7 @@
" -b --drivebase : display database file content that allow hddtemp to\n"
" recognize supported drives.\n"
" -D --debug : display various S.M.A.R.T. fields and their values.\n"
-@@ -128,6 +99,7 @@
+@@ -128,6 +99,7 @@ msgid ""
" -d --daemon : run hddtemp in TCP/IP daemon mode (port %d by "
"default.)\n"
" -f --file=FILE : specify database file to use.\n"
@@ -520,7 +526,7 @@
" -l --listen=addr : listen on a specific interface (in TCP/IP daemon "
"mode).\n"
" -n --numeric : print only the temperature.\n"
-@@ -135,6 +107,8 @@
+@@ -135,6 +107,8 @@ msgid ""
" -s --separator=C : separator to use between fields (in TCP/IP daemon "
"mode).\n"
" -S --syslog=s : log temperature to syslog every s seconds.\n"
@@ -529,7 +535,7 @@
" -q --quiet : do not check if the drive is supported.\n"
" -v --version : display hddtemp version number.\n"
" -w --wake-up : wake-up the drive if need.\n"
-@@ -168,59 +142,90 @@
+@@ -168,59 +142,90 @@ msgstr ""
"\n"
"óÏÏÂÝÅÎÉÑ Ï ÏÛÉÂËÁÈ É ÄÁÎÎÙÅ ÄÌÑ ÄÉÓËÏ× ÏÔÐÒÁ×ÌÑÊÔÅ ÎÁ <hddtemp@guzu.net>.\n"
@@ -636,6 +642,8 @@
+
+#~ msgid "field(%d)\t = %d\n"
+#~ msgstr "ÐÏÌÅ(%d)\t = %d\n"
+Index: hddtemp-0.3-beta15/po/sv.po
+===================================================================
--- hddtemp-0.3-beta15.orig/po/sv.po
+++ hddtemp-0.3-beta15/po/sv.po
@@ -6,8 +6,8 @@
@@ -649,7 +657,7 @@
"PO-Revision-Date: 2005-11-02 19:03+0100\n"
"Last-Translator: Daniel Nylander <po@danielnylander.se>\n"
"Language-Team: Swedish <sv@li.org>\n"
-@@ -17,23 +17,7 @@
+@@ -17,23 +17,7 @@ msgstr ""
"X-Poedit-Language: swe\n"
"X-Poedit-Country: swe\n"
@@ -674,7 +682,7 @@
#, c-format
msgid ""
"\n"
-@@ -46,7 +30,7 @@
+@@ -46,7 +30,7 @@ msgstr ""
"Modell: %s\n"
"\n"
@@ -683,7 +691,7 @@
#, c-format
msgid ""
"WARNING: Drive %s doesn't seem to have a temperature sensor.\n"
-@@ -60,76 +44,63 @@
+@@ -60,76 +44,63 @@ msgstr ""
"net).\n"
"VARNING: Se --help, --debug och --drivebase flaggorna.\n"
@@ -777,7 +785,7 @@
" -b --drivebase : display database file content that allow hddtemp to\n"
" recognize supported drives.\n"
" -D --debug : display various S.M.A.R.T. fields and their values.\n"
-@@ -139,6 +110,7 @@
+@@ -139,6 +110,7 @@ msgid ""
" -d --daemon : run hddtemp in TCP/IP daemon mode (port %d by "
"default.)\n"
" -f --file=FILE : specify database file to use.\n"
@@ -785,7 +793,7 @@
" -l --listen=addr : listen on a specific interface (in TCP/IP daemon "
"mode).\n"
" -n --numeric : print only the temperature.\n"
-@@ -146,6 +118,8 @@
+@@ -146,6 +118,8 @@ msgid ""
" -s --separator=C : separator to use between fields (in TCP/IP daemon "
"mode).\n"
" -S --syslog=s : log temperature to syslog every s seconds.\n"
@@ -794,7 +802,7 @@
" -q --quiet : do not check if the drive is supported.\n"
" -v --version : display hddtemp version number.\n"
" -w --wake-up : wake-up the drive if need.\n"
-@@ -184,61 +158,91 @@
+@@ -184,61 +158,91 @@ msgstr ""
"\n"
"Rapportera buggar eller nya hårddiskar till <hddtemp@guzu.net>.\n"
@@ -901,9 +909,11 @@
+
+#~ msgid "field(%d)\t = %d\n"
+#~ msgstr "fält(%d)\t = %d\n"
+Index: hddtemp-0.3-beta15/po/pt.po
+===================================================================
--- hddtemp-0.3-beta15.orig/po/pt.po
+++ hddtemp-0.3-beta15/po/pt.po
-@@ -7,7 +7,7 @@
+@@ -7,7 +7,7 @@ msgid ""
msgstr ""
"Project-Id-Version: hddtemp 0.3-beta14\n"
"Report-Msgid-Bugs-To: \n"
@@ -912,7 +922,7 @@
"PO-Revision-Date: 2006-03-29 23:22+0000\n"
"Last-Translator: Miguel Figueiredo <elmig@debianp.org>\n"
"Language-Team: Portuguese <traduz@debianpt.org>\n"
-@@ -15,23 +15,7 @@
+@@ -15,23 +15,7 @@ msgstr ""
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
@@ -937,7 +947,7 @@
#, c-format
msgid ""
"\n"
-@@ -44,7 +28,7 @@
+@@ -44,7 +28,7 @@ msgstr ""
"Modelo: %s\n"
"\n"
@@ -946,7 +956,7 @@
#, c-format
msgid ""
"WARNING: Drive %s doesn't seem to have a temperature sensor.\n"
-@@ -54,79 +38,68 @@
+@@ -54,79 +38,68 @@ msgid ""
msgstr ""
"AVISO: O disco %s não parece ter um sensor de temperatura.\n"
"AVISO: Isto não significa que não tem nenhum.\n"
@@ -1047,7 +1057,7 @@
" -b --drivebase : display database file content that allow hddtemp to\n"
" recognize supported drives.\n"
" -D --debug : display various S.M.A.R.T. fields and their values.\n"
-@@ -136,6 +109,7 @@
+@@ -136,6 +109,7 @@ msgid ""
" -d --daemon : run hddtemp in TCP/IP daemon mode (port %d by "
"default.)\n"
" -f --file=FILE : specify database file to use.\n"
@@ -1055,7 +1065,7 @@
" -l --listen=addr : listen on a specific interface (in TCP/IP daemon "
"mode).\n"
" -n --numeric : print only the temperature.\n"
-@@ -143,6 +117,8 @@
+@@ -143,6 +117,8 @@ msgid ""
" -s --separator=C : separator to use between fields (in TCP/IP daemon "
"mode).\n"
" -S --syslog=s : log temperature to syslog every s seconds.\n"
@@ -1064,7 +1074,7 @@
" -q --quiet : do not check if the drive is supported.\n"
" -v --version : display hddtemp version number.\n"
" -w --wake-up : wake-up the drive if need.\n"
-@@ -156,19 +132,23 @@
+@@ -156,19 +132,23 @@ msgstr ""
" hddtemp mostra a temperatura dos discos indicados no argumento.\n"
" Os discos têm de suportar S.M.A.R.T.\n"
"\n"
@@ -1096,7 +1106,7 @@
" -q --quiet : não verificar se o disco é suportado.\n"
" -v --version : mostrar o número da versão do hddtemp.\n"
" -w --wake-up : acordar o disco se necessário.\n"
-@@ -177,58 +157,93 @@
+@@ -177,58 +157,93 @@ msgstr ""
"\n"
"Relatar bugs ou novos discos para <hddtemp@guzu.net>.\n"
@@ -1208,7 +1218,9 @@
+
+#~ msgid "field(%d)\t = %d\n"
+#~ msgstr "campo(%d)\t = %d\n"
---- hddtemp-0.3-beta15.orig/po/de.po
+Index: hddtemp-0.3-beta15/po/de.po
+===================================================================
+--- /dev/null
+++ hddtemp-0.3-beta15/po/de.po
@@ -0,0 +1,250 @@
+# German translation of hddtemp.
@@ -1461,12 +1473,16 @@
+#, c-format
+msgid "log sense failed : %s"
+msgstr "Protokoll-Erkennung fehlgeschlagen : %s"
+Index: hddtemp-0.3-beta15/po/LINGUAS
+===================================================================
--- hddtemp-0.3-beta15.orig/po/LINGUAS
+++ hddtemp-0.3-beta15/po/LINGUAS
@@ -1,2 +1,2 @@
# Set of available languages.
-fr pt ru sv
+de fr pt ru sv
+Index: hddtemp-0.3-beta15/po/hddtemp.pot
+===================================================================
--- hddtemp-0.3-beta15.orig/po/hddtemp.pot
+++ hddtemp-0.3-beta15/po/hddtemp.pot
@@ -1,35 +1,22 @@
@@ -1513,7 +1529,7 @@
#, c-format
msgid ""
"\n"
-@@ -38,7 +25,7 @@
+@@ -38,7 +25,7 @@ msgid ""
"\n"
msgstr ""
@@ -1522,7 +1538,7 @@
#, c-format
msgid ""
"WARNING: Drive %s doesn't seem to have a temperature sensor.\n"
-@@ -47,67 +34,59 @@
+@@ -47,67 +34,59 @@ msgid ""
"WARNING: See --help, --debug and --drivebase options.\n"
msgstr ""
@@ -1604,7 +1620,7 @@
" -b --drivebase : display database file content that allow hddtemp to\n"
" recognize supported drives.\n"
" -D --debug : display various S.M.A.R.T. fields and their values.\n"
-@@ -117,6 +96,7 @@
+@@ -117,6 +96,7 @@ msgid ""
" -d --daemon : run hddtemp in TCP/IP daemon mode (port %d by "
"default.)\n"
" -f --file=FILE : specify database file to use.\n"
@@ -1612,7 +1628,7 @@
" -l --listen=addr : listen on a specific interface (in TCP/IP daemon "
"mode).\n"
" -n --numeric : print only the temperature.\n"
-@@ -124,6 +104,8 @@
+@@ -124,6 +104,8 @@ msgid ""
" -s --separator=C : separator to use between fields (in TCP/IP daemon "
"mode).\n"
" -S --syslog=s : log temperature to syslog every s seconds.\n"
@@ -1621,7 +1637,7 @@
" -q --quiet : do not check if the drive is supported.\n"
" -v --version : display hddtemp version number.\n"
" -w --wake-up : wake-up the drive if need.\n"
-@@ -133,58 +115,69 @@
+@@ -133,58 +115,69 @@ msgid ""
"Report bugs or new drives to <hddtemp@guzu.net>.\n"
msgstr ""
@@ -1705,9 +1721,11 @@
#, c-format
msgid "log sense failed : %s"
msgstr ""
+Index: hddtemp-0.3-beta15/src/sata.c
+===================================================================
--- hddtemp-0.3-beta15.orig/src/sata.c
+++ hddtemp-0.3-beta15/src/sata.c
-@@ -118,11 +118,22 @@
+@@ -118,11 +118,22 @@ static enum e_gettemp sata_get_temperatu
int i;
u16 * p;
@@ -1731,7 +1749,7 @@
/* get SMART values */
if(sata_enable_smart(dsk->fd) != 0) {
-@@ -154,24 +165,15 @@
+@@ -154,24 +165,15 @@ static enum e_gettemp sata_get_temperatu
}
/* temperature */
@@ -1759,6 +1777,8 @@
/* never reached */
}
+Index: hddtemp-0.3-beta15/src/satacmds.c
+===================================================================
--- hddtemp-0.3-beta15.orig/src/satacmds.c
+++ hddtemp-0.3-beta15/src/satacmds.c
@@ -39,7 +39,7 @@
@@ -1770,7 +1790,7 @@
// Application specific includes
#include "satacmds.h"
-@@ -80,8 +80,8 @@
+@@ -80,8 +80,8 @@ int sata_pass_thru(int device, unsigned
ret = scsi_SG_IO(device, cdb, sizeof(cdb), buffer, cmd[3] * 512, sense, sizeof(sense), dxfer_direction);
@@ -1781,7 +1801,7 @@
return 1;
else
return ret;
-@@ -95,10 +95,10 @@
+@@ -95,10 +95,10 @@ void sata_fixstring(unsigned char *s, in
p = s;
end = &s[bytecount & ~1]; /* bytecount must be even */
@@ -1794,6 +1814,8 @@
}
/* strip leading blanks */
+Index: hddtemp-0.3-beta15/src/backtrace.c
+===================================================================
--- hddtemp-0.3-beta15.orig/src/backtrace.c
+++ hddtemp-0.3-beta15/src/backtrace.c
@@ -16,9 +16,10 @@
@@ -1822,7 +1844,7 @@
#define MAX_BTSIZE 64
-@@ -42,7 +47,6 @@
+@@ -42,7 +47,6 @@ void backtrace_handler(int n, siginfo_t
static char **messages = NULL;
static size_t btsize = 0;
static size_t i;
@@ -1830,7 +1852,7 @@
static char *strerr = "???";
static FILE *fstrm;
-@@ -61,10 +65,10 @@
+@@ -61,10 +65,10 @@ void backtrace_handler(int n, siginfo_t
SIC_CASE(SEGV_MAPERR);
SIC_CASE(SEGV_ACCERR);
}
@@ -1843,7 +1865,7 @@
break;
case SIGILL:
switch(ist->si_code) {
-@@ -77,10 +81,10 @@
+@@ -77,10 +81,10 @@ void backtrace_handler(int n, siginfo_t
SIC_CASE(ILL_COPROC);
SIC_CASE(ILL_BADSTK);
}
@@ -1856,7 +1878,7 @@
break;
case SIGBUS:
switch(ist->si_code) {
-@@ -88,10 +92,10 @@
+@@ -88,10 +92,10 @@ void backtrace_handler(int n, siginfo_t
SIC_CASE(BUS_ADRERR);
SIC_CASE(BUS_OBJERR);
}
@@ -1869,7 +1891,7 @@
break;
}
fflush(fstrm);
-@@ -101,7 +105,7 @@
+@@ -101,7 +105,7 @@ void backtrace_handler(int n, siginfo_t
/*
old_eip = *(unsigned int*)((void*)&n-4);
old_ebp = *(unsigned int*)((void*)&n-8);
@@ -1878,7 +1900,7 @@
*(unsigned int*)((void*)&n-8) = puc->uc_mcontext.gregs[REG_EBP];
btsize = backtrace(btinfo, MAX_BTSIZE);
-@@ -111,14 +115,14 @@
+@@ -111,14 +115,14 @@ void backtrace_handler(int n, siginfo_t
*/
btsize = backtrace(btinfo, MAX_BTSIZE);
@@ -1895,9 +1917,11 @@
fflush(fstrm);
fclose(fstrm);
+Index: hddtemp-0.3-beta15/src/daemon.c
+===================================================================
--- hddtemp-0.3-beta15.orig/src/daemon.c
+++ hddtemp-0.3-beta15/src/daemon.c
-@@ -163,19 +163,16 @@
+@@ -163,19 +163,16 @@ void daemon_send_msg(struct disk *ldisks
switch(dsk->ret) {
case GETTEMP_NOT_APPLICABLE:
@@ -1922,7 +1946,7 @@
break;
case GETTEMP_KNOWN:
n = snprintf(msg, sizeof(msg), "%s%c%s%c%d%c%c",
-@@ -185,26 +182,23 @@
+@@ -185,26 +182,23 @@ void daemon_send_msg(struct disk *ldisks
get_unit(dsk));
break;
case GETTEMP_NOSENSOR:
@@ -1955,7 +1979,7 @@
break;
}
write(cfd,&separator, 1);
-@@ -222,14 +216,11 @@
+@@ -222,14 +216,11 @@ void daemon_syslog(struct disk *ldisks)
for(dsk = ldisks; dsk; dsk = dsk->next) {
switch(dsk->ret) {
case GETTEMP_KNOWN:
@@ -1972,7 +1996,7 @@
break;
case GETTEMP_DRIVE_SLEEP:
syslog(LOG_WARNING, _("%s: %s: drive is sleeping"),
-@@ -270,28 +261,30 @@
+@@ -270,28 +261,30 @@ void do_daemon_mode(struct disk *ldisks)
fd_set deffds;
time_t next_time;
@@ -2025,9 +2049,11 @@
}
chdir("/");
umask(0);
+Index: hddtemp-0.3-beta15/src/hddtemp.c
+===================================================================
--- hddtemp-0.3-beta15.orig/src/hddtemp.c
+++ hddtemp-0.3-beta15/src/hddtemp.c
-@@ -75,7 +75,7 @@
+@@ -75,7 +75,7 @@ char * listen_addr;
char separator = SEPARATOR;
struct bustype * bus[BUS_TYPE_MAX];
@@ -2036,7 +2062,7 @@
static enum { DEFAULT, CELSIUS, FAHRENHEIT } unit;
-@@ -194,23 +194,7 @@
+@@ -194,23 +194,7 @@ static void display_temperature(struct d
if (numeric && quiet)
printf("0\n");
else
@@ -2061,7 +2087,7 @@
break;
case GETTEMP_KNOWN:
-@@ -232,14 +216,14 @@
+@@ -232,14 +216,14 @@ static void display_temperature(struct d
if (numeric && quiet)
printf("0\n");
else
@@ -2078,7 +2104,7 @@
break;
default:
-@@ -268,8 +252,9 @@
+@@ -268,8 +252,9 @@ void do_direct_mode(struct disk *ldisks)
int main(int argc, char* argv[]) {
int i, c, lindex = 0, db_loaded = 0;
@@ -2089,16 +2115,16 @@
backtrace_sigsegv();
backtrace_sigill();
-@@ -279,7 +264,7 @@
- bindtextdomain (PACKAGE, LOCALEDIR);
+@@ -283,7 +268,7 @@ int main(int argc, char* argv[]) {
textdomain (PACKAGE);
+ #endif
- show_db = debug = numeric = quiet = wakeup = af_hint = syslog_interval = 0;
+ show_db = debug = numeric = quiet = wakeup = af_hint = syslog_interval = foreground = 0;
unit = DEFAULT;
portnum = PORT_NUMBER;
listen_addr = NULL;
-@@ -294,6 +279,7 @@
+@@ -298,6 +283,7 @@ int main(int argc, char* argv[]) {
{"drivebase", 0, NULL, 'b'},
{"debug", 0, NULL, 'D'},
{"file", 1, NULL, 'f'},
@@ -2106,7 +2132,7 @@
{"listen", 1, NULL, 'l'},
{"version", 0, NULL, 'v'},
{"port", 1, NULL, 'p'},
-@@ -305,7 +291,7 @@
+@@ -309,7 +295,7 @@ int main(int argc, char* argv[]) {
{0, 0, 0, 0}
};
@@ -2115,7 +2141,7 @@
if (c == -1)
break;
-@@ -382,12 +368,13 @@
+@@ -386,12 +372,13 @@ int main(int argc, char* argv[]) {
" (done for every drive supplied).\n"
" -d --daemon : run hddtemp in TCP/IP daemon mode (port %d by default.)\n"
" -f --file=FILE : specify database file to use.\n"
@@ -2130,7 +2156,7 @@
" -q --quiet : do not check if the drive is supported.\n"
" -v --version : display hddtemp version number.\n"
" -w --wake-up : wake-up the drive if need.\n"
-@@ -418,6 +405,9 @@
+@@ -422,6 +409,9 @@ int main(int argc, char* argv[]) {
}
}
break;
@@ -2140,7 +2166,7 @@
default:
exit(1);
}
-@@ -489,6 +479,7 @@
+@@ -493,6 +483,7 @@ int main(int argc, char* argv[]) {
if( (dsk->fd = open(dsk->drive, O_RDONLY | O_NONBLOCK)) < 0) {
snprintf(dsk->errormsg, MAX_ERRORMSG_SIZE, "open: %s\n", strerror(errno));
dsk->type = ERROR;
@@ -2148,7 +2174,7 @@
continue;
}
-@@ -501,6 +492,7 @@
+@@ -505,6 +496,7 @@ int main(int argc, char* argv[]) {
ldisks = dsk->next;
free(dsk);
@@ -2156,7 +2182,7 @@
continue;
}
-@@ -514,11 +506,17 @@
+@@ -518,11 +510,17 @@ int main(int argc, char* argv[]) {
db_loaded = 1;
}
@@ -2177,16 +2203,18 @@
}
}
-@@ -530,5 +528,5 @@
+@@ -534,5 +532,5 @@ int main(int argc, char* argv[]) {
do_direct_mode(ldisks);
}
- return 0;
+ return ret;
}
+Index: hddtemp-0.3-beta15/src/ata.c
+===================================================================
--- hddtemp-0.3-beta15.orig/src/ata.c
+++ hddtemp-0.3-beta15/src/ata.c
-@@ -75,7 +75,7 @@
+@@ -75,7 +75,7 @@ static enum e_gettemp ata_get_temperatur
int i;
u16 * p;
@@ -2195,7 +2223,7 @@
close(dsk->fd);
dsk->fd = -1;
return GETTEMP_NOSENSOR;
-@@ -140,24 +140,15 @@
+@@ -140,24 +140,15 @@ static enum e_gettemp ata_get_temperatur
*/
/* temperature */
@@ -2224,9 +2252,11 @@
/* never reached */
}
+Index: hddtemp-0.3-beta15/src/hddtemp.h
+===================================================================
--- hddtemp-0.3-beta15.orig/src/hddtemp.h
+++ hddtemp-0.3-beta15/src/hddtemp.h
-@@ -39,8 +39,6 @@
+@@ -39,8 +39,6 @@ enum e_gettemp {
GETTEMP_ERROR, /* Error */
GETTEMP_NOT_APPLICABLE, /* */
GETTEMP_UNKNOWN, /* Drive is not in database */
@@ -2235,7 +2265,7 @@
GETTEMP_KNOWN, /* Drive appear in database */
GETTEMP_NOSENSOR, /* Drive appear in database but is known to have no sensor */
GETTEMP_DRIVE_SLEEP /* Drive is sleeping */
-@@ -78,7 +76,7 @@
+@@ -78,7 +76,7 @@ struct bustype {
extern struct bustype * bus[BUS_TYPE_MAX];
extern char errormsg[MAX_ERRORMSG_SIZE];
@@ -2244,9 +2274,11 @@
extern char separator;
extern long portnum, syslog_interval;
extern char * listen_addr;
+Index: hddtemp-0.3-beta15/src/scsicmds.c
+===================================================================
--- hddtemp-0.3-beta15.orig/src/scsicmds.c
+++ hddtemp-0.3-beta15/src/scsicmds.c
-@@ -147,6 +147,7 @@
+@@ -147,6 +147,7 @@ int scsi_inquiry(int device, unsigned ch
return 1;
else {
scsi_fixstring(buffer + 8, 24);