diff --git a/import-layers/meta-raspberrypi/recipes-bsp/bootfiles/bcm2835-bootfiles.bb b/import-layers/meta-raspberrypi/recipes-bsp/bootfiles/bcm2835-bootfiles.bb
index a115037..466f443 100644
--- a/import-layers/meta-raspberrypi/recipes-bsp/bootfiles/bcm2835-bootfiles.bb
+++ b/import-layers/meta-raspberrypi/recipes-bsp/bootfiles/bcm2835-bootfiles.bb
@@ -3,11 +3,13 @@
 
 LIC_FILES_CHKSUM = "file://LICENCE.broadcom;md5=4a4d169737c0786fb9482bb6d30401d1"
 
-inherit deploy
+inherit deploy nopackages
 
 include recipes-bsp/common/firmware.inc
 
-RDEPENDS_${PN} = "rpi-config"
+INHIBIT_DEFAULT_DEPS = "1"
+
+DEPENDS = "rpi-config"
 
 COMPATIBLE_MACHINE = "^rpi$"
 
@@ -32,7 +34,7 @@
     touch ${DEPLOYDIR}/${PN}/${PN}-${PV}.stamp
 }
 
-addtask deploy before do_package after do_install
+addtask deploy before do_build after do_install
 do_deploy[dirs] += "${DEPLOYDIR}/${PN}"
 
 PACKAGE_ARCH = "${MACHINE_ARCH}"
diff --git a/import-layers/meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb b/import-layers/meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb
index ca4160b..e0b2b58 100644
--- a/import-layers/meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb
+++ b/import-layers/meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb
@@ -15,15 +15,18 @@
 
 PR = "r5"
 
+INHIBIT_DEFAULT_DEPS = "1"
+
 PITFT="${@bb.utils.contains("MACHINE_FEATURES", "pitft", "1", "0", d)}"
 PITFT22="${@bb.utils.contains("MACHINE_FEATURES", "pitft22", "1", "0", d)}"
 PITFT28r="${@bb.utils.contains("MACHINE_FEATURES", "pitft28r", "1", "0", d)}"
 PITFT35r="${@bb.utils.contains("MACHINE_FEATURES", "pitft35r", "1", "0", d)}"
 
 VC4GRAPHICS="${@bb.utils.contains("MACHINE_FEATURES", "vc4graphics", "1", "0", d)}"
-VC4DTBO_raspberrypi3-64 = "vc4-fkms-v3d"
+VC4DTBO_raspberrypi3-64 ?= "vc4-fkms-v3d"
 VC4DTBO ?= "vc4-kms-v3d"
-inherit deploy
+
+inherit deploy nopackages
 
 do_deploy() {
     install -d ${DEPLOYDIR}/bcm2835-bootfiles
@@ -31,25 +34,33 @@
     cp ${S}/config.txt ${DEPLOYDIR}/bcm2835-bootfiles/
 
     if [ -n "${KEY_DECODE_MPG2}" ]; then
-        sed -i '/#decode_MPG2/ c\decode_MPG2=${KEY_DECODE_MPG2}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        sed -i '/#decode_MPG2=/ c\decode_MPG2=${KEY_DECODE_MPG2}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
     if [ -n "${KEY_DECODE_WVC1}" ]; then
-        sed -i '/#decode_WVC1/ c\decode_WVC1=${KEY_DECODE_WVC1}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        sed -i '/#decode_WVC1=/ c\decode_WVC1=${KEY_DECODE_WVC1}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
     if [ -n "${DISABLE_OVERSCAN}" ]; then
-        sed -i '/#disable_overscan/ c\disable_overscan=${DISABLE_OVERSCAN}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        sed -i '/#disable_overscan=/ c\disable_overscan=${DISABLE_OVERSCAN}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
+    if [ -n "${DISABLE_SPLASH}" ]; then
+        sed -i '/#disable_splash=/ c\disable_splash=${DISABLE_SPLASH}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+
+    # Set overclocking options
     if [ -n "${ARM_FREQ}" ]; then
-        sed -i '/#arm_freq/ c\arm_freq=${ARM_FREQ}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        sed -i '/#arm_freq=/ c\arm_freq=${ARM_FREQ}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+    if [ -n "${GPU_FREQ}" ]; then
+        sed -i '/#gpu_freq=/ c\gpu_freq=${GPU_FREQ}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
     if [ -n "${CORE_FREQ}" ]; then
-        sed -i '/#core_freq/ c\core_freq=${CORE_FREQ}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        sed -i '/#core_freq=/ c\core_freq=${CORE_FREQ}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
     if [ -n "${SDRAM_FREQ}" ]; then
-        sed -i '/#sdram_freq/ c\sdram_freq=${SDRAM_FREQ}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        sed -i '/#sdram_freq=/ c\sdram_freq=${SDRAM_FREQ}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
     if [ -n "${OVER_VOLTAGE}" ]; then
-        sed -i '/#over_voltage/ c\over_voltage=${OVER_VOLTAGE}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        sed -i '/#over_voltage=/ c\over_voltage=${OVER_VOLTAGE}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
 
     # GPU memory
@@ -57,13 +68,47 @@
         sed -i '/#gpu_mem=/ c\gpu_mem=${GPU_MEM}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
     if [ -n "${GPU_MEM_256}" ]; then
-        sed -i '/#gpu_mem_256/ c\gpu_mem_256=${GPU_MEM_256}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        sed -i '/#gpu_mem_256=/ c\gpu_mem_256=${GPU_MEM_256}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
     if [ -n "${GPU_MEM_512}" ]; then
-        sed -i '/#gpu_mem_512/ c\gpu_mem_512=${GPU_MEM_512}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        sed -i '/#gpu_mem_512=/ c\gpu_mem_512=${GPU_MEM_512}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
     if [ -n "${GPU_MEM_1024}" ]; then
-        sed -i '/#gpu_mem_1024/ c\gpu_mem_1024=${GPU_MEM_1024}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        sed -i '/#gpu_mem_1024=/ c\gpu_mem_1024=${GPU_MEM_1024}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+
+    # Set boot delay
+    if [ -n "${BOOT_DELAY}" ]; then
+        sed -i '/#boot_delay=/ c\boot_delay=${BOOT_DELAY}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+    if [ -n "${BOOT_DELAY_MS}" ]; then
+        sed -i '/#boot_delay_ms=/ c\boot_delay_ms=${BOOT_DELAY_MS}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+
+    # Set HDMI and composite video options
+    if [ -n "${HDMI_FORCE_HOTPLUG}" ]; then
+        sed -i '/#hdmi_force_hotplug=/ c\hdmi_force_hotplug=${HDMI_FORCE_HOTPLUG}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+    if [ -n "${HDMI_DRIVE}" ]; then
+        sed -i '/#hdmi_drive=/ c\hdmi_drive=${HDMI_DRIVE}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+    if [ -n "${HDMI_GROUP}" ]; then
+        sed -i '/#hdmi_group=/ c\hdmi_group=${HDMI_GROUP}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+    if [ -n "${HDMI_MODE}" ]; then
+        sed -i '/#hdmi_mode=/ c\hdmi_mode=${HDMI_MODE}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+    if [ -n "${CONFIG_HDMI_BOOST}" ]; then
+        sed -i '/#config_hdmi_boost=/ c\config_hdmi_boost=${CONFIG_HDMI_BOOST}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+    if [ -n "${SDTV_MODE}" ]; then
+        sed -i '/#sdtv_mode=/ c\sdtv_mode=${SDTV_MODE}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+    if [ -n "${SDTV_ASPECT}" ]; then
+        sed -i '/#sdtv_aspect=/ c\sdtv_aspect=${SDTV_ASPECT}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+    if [ -n "${DISPLAY_ROTATE}" ]; then
+        sed -i '/#display_rotate=/ c\display_rotate=${DISPLAY_ROTATE}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
 
     # Video camera support
@@ -84,6 +129,7 @@
         echo "dtparam=spi=on" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
 
+    # I2C support
     if [ -n "${ENABLE_I2C}" ] || [ "${PITFT}" = "1" ]; then
         echo "# Enable I2C" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
         echo "dtparam=i2c1=on" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
@@ -95,12 +141,10 @@
         echo "# Enable PITFT22 display" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
         echo "dtoverlay=pitft22,rotate=270,speed=32000000,txbuflen=32768" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
-
     if [ "${PITFT28r}" = "1" ]; then
         echo "# Enable PITFT28r display" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
         echo "dtoverlay=pitft28-resistive,rotate=90,speed=32000000,txbuflen=32768" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
-
     if [ "${PITFT35r}" = "1" ]; then
         echo "# Enable PITFT35r display" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
         echo "dtoverlay=pitft35-resistive,rotate=90,speed=42000000,fps=20" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
@@ -127,6 +171,15 @@
         echo "hdmi_cvt 1024 600 60 6 0 0 0" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
         echo "hdmi_drive=1" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
+
+    # DWC2 USB peripheral support
+    if [ "${ENABLE_DWC2_PERIPHERAL}" = "1" ]; then
+        echo "# Enable USB peripheral mode" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        echo "dtoverlay=dwc2,dr_mode=peripheral" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+    
+    # Append extra config if the user has provided any
+    echo "${RPI_EXTRA_CONFIG}" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
 }
 
 do_deploy_append_raspberrypi3-64() {
@@ -135,13 +188,9 @@
 
     echo "# Enable audio (loads snd_bcm2835)" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     echo "dtparam=audio=on" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
-
-    # Device Tree support
-    echo "# Load correct Device Tree for Aarch64" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
-    echo "device_tree=bcm2710-rpi-3-b.dtb" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
 }
 
-addtask deploy before do_package after do_install
+addtask deploy before do_build after do_install
 do_deploy[dirs] += "${DEPLOYDIR}/bcm2835-bootfiles"
 
 PACKAGE_ARCH = "${MACHINE_ARCH}"