diff --git a/import-layers/meta-raspberrypi/recipes-bsp/bootfiles/bcm2835-bootfiles.bb b/import-layers/meta-raspberrypi/recipes-bsp/bootfiles/bcm2835-bootfiles.bb
index a115037..466f443 100644
--- a/import-layers/meta-raspberrypi/recipes-bsp/bootfiles/bcm2835-bootfiles.bb
+++ b/import-layers/meta-raspberrypi/recipes-bsp/bootfiles/bcm2835-bootfiles.bb
@@ -3,11 +3,13 @@
 
 LIC_FILES_CHKSUM = "file://LICENCE.broadcom;md5=4a4d169737c0786fb9482bb6d30401d1"
 
-inherit deploy
+inherit deploy nopackages
 
 include recipes-bsp/common/firmware.inc
 
-RDEPENDS_${PN} = "rpi-config"
+INHIBIT_DEFAULT_DEPS = "1"
+
+DEPENDS = "rpi-config"
 
 COMPATIBLE_MACHINE = "^rpi$"
 
@@ -32,7 +34,7 @@
     touch ${DEPLOYDIR}/${PN}/${PN}-${PV}.stamp
 }
 
-addtask deploy before do_package after do_install
+addtask deploy before do_build after do_install
 do_deploy[dirs] += "${DEPLOYDIR}/${PN}"
 
 PACKAGE_ARCH = "${MACHINE_ARCH}"
diff --git a/import-layers/meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb b/import-layers/meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb
index ca4160b..e0b2b58 100644
--- a/import-layers/meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb
+++ b/import-layers/meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb
@@ -15,15 +15,18 @@
 
 PR = "r5"
 
+INHIBIT_DEFAULT_DEPS = "1"
+
 PITFT="${@bb.utils.contains("MACHINE_FEATURES", "pitft", "1", "0", d)}"
 PITFT22="${@bb.utils.contains("MACHINE_FEATURES", "pitft22", "1", "0", d)}"
 PITFT28r="${@bb.utils.contains("MACHINE_FEATURES", "pitft28r", "1", "0", d)}"
 PITFT35r="${@bb.utils.contains("MACHINE_FEATURES", "pitft35r", "1", "0", d)}"
 
 VC4GRAPHICS="${@bb.utils.contains("MACHINE_FEATURES", "vc4graphics", "1", "0", d)}"
-VC4DTBO_raspberrypi3-64 = "vc4-fkms-v3d"
+VC4DTBO_raspberrypi3-64 ?= "vc4-fkms-v3d"
 VC4DTBO ?= "vc4-kms-v3d"
-inherit deploy
+
+inherit deploy nopackages
 
 do_deploy() {
     install -d ${DEPLOYDIR}/bcm2835-bootfiles
@@ -31,25 +34,33 @@
     cp ${S}/config.txt ${DEPLOYDIR}/bcm2835-bootfiles/
 
     if [ -n "${KEY_DECODE_MPG2}" ]; then
-        sed -i '/#decode_MPG2/ c\decode_MPG2=${KEY_DECODE_MPG2}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        sed -i '/#decode_MPG2=/ c\decode_MPG2=${KEY_DECODE_MPG2}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
     if [ -n "${KEY_DECODE_WVC1}" ]; then
-        sed -i '/#decode_WVC1/ c\decode_WVC1=${KEY_DECODE_WVC1}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        sed -i '/#decode_WVC1=/ c\decode_WVC1=${KEY_DECODE_WVC1}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
     if [ -n "${DISABLE_OVERSCAN}" ]; then
-        sed -i '/#disable_overscan/ c\disable_overscan=${DISABLE_OVERSCAN}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        sed -i '/#disable_overscan=/ c\disable_overscan=${DISABLE_OVERSCAN}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
+    if [ -n "${DISABLE_SPLASH}" ]; then
+        sed -i '/#disable_splash=/ c\disable_splash=${DISABLE_SPLASH}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+
+    # Set overclocking options
     if [ -n "${ARM_FREQ}" ]; then
-        sed -i '/#arm_freq/ c\arm_freq=${ARM_FREQ}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        sed -i '/#arm_freq=/ c\arm_freq=${ARM_FREQ}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+    if [ -n "${GPU_FREQ}" ]; then
+        sed -i '/#gpu_freq=/ c\gpu_freq=${GPU_FREQ}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
     if [ -n "${CORE_FREQ}" ]; then
-        sed -i '/#core_freq/ c\core_freq=${CORE_FREQ}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        sed -i '/#core_freq=/ c\core_freq=${CORE_FREQ}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
     if [ -n "${SDRAM_FREQ}" ]; then
-        sed -i '/#sdram_freq/ c\sdram_freq=${SDRAM_FREQ}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        sed -i '/#sdram_freq=/ c\sdram_freq=${SDRAM_FREQ}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
     if [ -n "${OVER_VOLTAGE}" ]; then
-        sed -i '/#over_voltage/ c\over_voltage=${OVER_VOLTAGE}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        sed -i '/#over_voltage=/ c\over_voltage=${OVER_VOLTAGE}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
 
     # GPU memory
@@ -57,13 +68,47 @@
         sed -i '/#gpu_mem=/ c\gpu_mem=${GPU_MEM}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
     if [ -n "${GPU_MEM_256}" ]; then
-        sed -i '/#gpu_mem_256/ c\gpu_mem_256=${GPU_MEM_256}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        sed -i '/#gpu_mem_256=/ c\gpu_mem_256=${GPU_MEM_256}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
     if [ -n "${GPU_MEM_512}" ]; then
-        sed -i '/#gpu_mem_512/ c\gpu_mem_512=${GPU_MEM_512}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        sed -i '/#gpu_mem_512=/ c\gpu_mem_512=${GPU_MEM_512}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
     if [ -n "${GPU_MEM_1024}" ]; then
-        sed -i '/#gpu_mem_1024/ c\gpu_mem_1024=${GPU_MEM_1024}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        sed -i '/#gpu_mem_1024=/ c\gpu_mem_1024=${GPU_MEM_1024}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+
+    # Set boot delay
+    if [ -n "${BOOT_DELAY}" ]; then
+        sed -i '/#boot_delay=/ c\boot_delay=${BOOT_DELAY}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+    if [ -n "${BOOT_DELAY_MS}" ]; then
+        sed -i '/#boot_delay_ms=/ c\boot_delay_ms=${BOOT_DELAY_MS}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+
+    # Set HDMI and composite video options
+    if [ -n "${HDMI_FORCE_HOTPLUG}" ]; then
+        sed -i '/#hdmi_force_hotplug=/ c\hdmi_force_hotplug=${HDMI_FORCE_HOTPLUG}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+    if [ -n "${HDMI_DRIVE}" ]; then
+        sed -i '/#hdmi_drive=/ c\hdmi_drive=${HDMI_DRIVE}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+    if [ -n "${HDMI_GROUP}" ]; then
+        sed -i '/#hdmi_group=/ c\hdmi_group=${HDMI_GROUP}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+    if [ -n "${HDMI_MODE}" ]; then
+        sed -i '/#hdmi_mode=/ c\hdmi_mode=${HDMI_MODE}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+    if [ -n "${CONFIG_HDMI_BOOST}" ]; then
+        sed -i '/#config_hdmi_boost=/ c\config_hdmi_boost=${CONFIG_HDMI_BOOST}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+    if [ -n "${SDTV_MODE}" ]; then
+        sed -i '/#sdtv_mode=/ c\sdtv_mode=${SDTV_MODE}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+    if [ -n "${SDTV_ASPECT}" ]; then
+        sed -i '/#sdtv_aspect=/ c\sdtv_aspect=${SDTV_ASPECT}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+    if [ -n "${DISPLAY_ROTATE}" ]; then
+        sed -i '/#display_rotate=/ c\display_rotate=${DISPLAY_ROTATE}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
 
     # Video camera support
@@ -84,6 +129,7 @@
         echo "dtparam=spi=on" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
 
+    # I2C support
     if [ -n "${ENABLE_I2C}" ] || [ "${PITFT}" = "1" ]; then
         echo "# Enable I2C" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
         echo "dtparam=i2c1=on" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
@@ -95,12 +141,10 @@
         echo "# Enable PITFT22 display" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
         echo "dtoverlay=pitft22,rotate=270,speed=32000000,txbuflen=32768" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
-
     if [ "${PITFT28r}" = "1" ]; then
         echo "# Enable PITFT28r display" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
         echo "dtoverlay=pitft28-resistive,rotate=90,speed=32000000,txbuflen=32768" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
-
     if [ "${PITFT35r}" = "1" ]; then
         echo "# Enable PITFT35r display" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
         echo "dtoverlay=pitft35-resistive,rotate=90,speed=42000000,fps=20" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
@@ -127,6 +171,15 @@
         echo "hdmi_cvt 1024 600 60 6 0 0 0" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
         echo "hdmi_drive=1" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     fi
+
+    # DWC2 USB peripheral support
+    if [ "${ENABLE_DWC2_PERIPHERAL}" = "1" ]; then
+        echo "# Enable USB peripheral mode" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+        echo "dtoverlay=dwc2,dr_mode=peripheral" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
+    fi
+    
+    # Append extra config if the user has provided any
+    echo "${RPI_EXTRA_CONFIG}" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
 }
 
 do_deploy_append_raspberrypi3-64() {
@@ -135,13 +188,9 @@
 
     echo "# Enable audio (loads snd_bcm2835)" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
     echo "dtparam=audio=on" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt
-
-    # Device Tree support
-    echo "# Load correct Device Tree for Aarch64" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
-    echo "device_tree=bcm2710-rpi-3-b.dtb" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt
 }
 
-addtask deploy before do_package after do_install
+addtask deploy before do_build after do_install
 do_deploy[dirs] += "${DEPLOYDIR}/bcm2835-bootfiles"
 
 PACKAGE_ARCH = "${MACHINE_ARCH}"
diff --git a/import-layers/meta-raspberrypi/recipes-bsp/common/firmware.inc b/import-layers/meta-raspberrypi/recipes-bsp/common/firmware.inc
index 67078c1..d564a49 100644
--- a/import-layers/meta-raspberrypi/recipes-bsp/common/firmware.inc
+++ b/import-layers/meta-raspberrypi/recipes-bsp/common/firmware.inc
@@ -1,9 +1,10 @@
-RPIFW_DATE ?= "20171029"
-RPIFW_SRC_URI ?= "https://github.com/raspberrypi/firmware/archive/1.${RPIFW_DATE}.tar.gz"
-RPIFW_S ?= "${WORKDIR}/firmware-1.${RPIFW_DATE}"
+RPIFW_DATE ?= "20180417"
+SRCREV ?= "5db8e4e1c63178e200d6fbea23ed4a9bf4656658"
+RPIFW_SRC_URI ?= "https://github.com/raspberrypi/firmware/archive/${SRCREV}.tar.gz"
+RPIFW_S ?= "${WORKDIR}/firmware-${SRCREV}"
 
 SRC_URI = "${RPIFW_SRC_URI}"
-SRC_URI[md5sum] = "4d27c1888a7bab3097471906e7b4a319"
-SRC_URI[sha256sum] = "46ce28c8d87ef22bdcc57ac1836ca3f04d1ec6f46580ff5a30bf76b3c0822117"
-PV = "${RPIFW_DATE}"
+SRC_URI[md5sum] = "6bce52f22a7a005a9bcdb9912b132590"
+SRC_URI[sha256sum] = "84568c4e7f5b0deee4cd76e7c0b48315885f983d6131d8148ef8af8438328a36"
 
+PV = "${RPIFW_DATE}"
diff --git a/import-layers/meta-raspberrypi/recipes-bsp/rpi-u-boot-scr/rpi-u-boot-scr.bb b/import-layers/meta-raspberrypi/recipes-bsp/rpi-u-boot-scr/rpi-u-boot-scr.bb
index 3457300..0106ac3 100644
--- a/import-layers/meta-raspberrypi/recipes-bsp/rpi-u-boot-scr/rpi-u-boot-scr.bb
+++ b/import-layers/meta-raspberrypi/recipes-bsp/rpi-u-boot-scr/rpi-u-boot-scr.bb
@@ -5,6 +5,8 @@
 
 DEPENDS = "u-boot-mkimage-native"
 
+INHIBIT_DEFAULT_DEPS = "1"
+
 SRC_URI = "file://boot.cmd.in"
 
 do_compile() {
@@ -14,7 +16,7 @@
     mkimage -A arm -T script -C none -n "Boot script" -d "${WORKDIR}/boot.cmd" boot.scr
 }
 
-inherit deploy
+inherit deploy nopackages
 
 do_deploy() {
     install -d ${DEPLOYDIR}
diff --git a/import-layers/meta-raspberrypi/recipes-bsp/u-boot/u-boot/0002-rpi_0_w-Add-configs-consistent-with-RpI3.patch b/import-layers/meta-raspberrypi/recipes-bsp/u-boot/u-boot/0002-rpi_0_w-Add-configs-consistent-with-RpI3.patch
new file mode 100644
index 0000000..e98fd85
--- /dev/null
+++ b/import-layers/meta-raspberrypi/recipes-bsp/u-boot/u-boot/0002-rpi_0_w-Add-configs-consistent-with-RpI3.patch
@@ -0,0 +1,41 @@
+From 5d113dc0130ea2ea9faaa000fba9c737266b9747 Mon Sep 17 00:00:00 2001
+From: Drew Moseley <drew.moseley@northern.tech>
+Date: Fri, 9 Feb 2018 18:10:09 -0500
+Subject: [PATCH] rpi_0_w: Add configs consistent with RpI3
+
+Upstream-Status: Accepted [https://patchwork.ozlabs.org/patch/856572/]
+
+Signed-off-by: Drew Moseley <drew.moseley@northern.tech>
+---
+ configs/rpi_0_w_defconfig | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+diff --git a/configs/rpi_0_w_defconfig b/configs/rpi_0_w_defconfig
+index 9a6d24b..1248294 100644
+--- a/configs/rpi_0_w_defconfig
++++ b/configs/rpi_0_w_defconfig
+@@ -12,14 +12,21 @@ CONFIG_SYS_PROMPT="U-Boot> "
+ CONFIG_CMD_GPIO=y
+ CONFIG_CMD_MMC=y
+ CONFIG_CMD_USB=y
++CONFIG_OF_EMBED=y
++CONFIG_ENV_FAT_INTERFACE="mmc"
++CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
++CONFIG_DM_KEYBOARD=y
+ CONFIG_DM_MMC=y
+ CONFIG_MMC_SDHCI=y
+ CONFIG_MMC_SDHCI_BCM2835=y
+ CONFIG_DM_ETH=y
+ CONFIG_USB=y
+ CONFIG_DM_USB=y
++CONFIG_USB_DWC2=y
+ CONFIG_USB_STORAGE=y
+ CONFIG_USB_KEYBOARD=y
++CONFIG_USB_HOST_ETHER=y
++CONFIG_USB_ETHER_SMSC95XX=y
+ CONFIG_DM_VIDEO=y
+ CONFIG_SYS_WHITE_ON_BLACK=y
+ CONFIG_CONSOLE_SCROLL_LINES=10
+-- 
+2.7.4
+
diff --git a/import-layers/meta-raspberrypi/recipes-bsp/u-boot/u-boot_%.bbappend b/import-layers/meta-raspberrypi/recipes-bsp/u-boot/u-boot_%.bbappend
index 3781666..7d4a49e 100644
--- a/import-layers/meta-raspberrypi/recipes-bsp/u-boot/u-boot_%.bbappend
+++ b/import-layers/meta-raspberrypi/recipes-bsp/u-boot/u-boot_%.bbappend
@@ -1 +1,7 @@
-RDEPENDS_${PN}_append_rpi = " rpi-u-boot-scr"
+FILESEXTRAPATHS_prepend := "${THISDIR}/u-boot:"
+
+SRC_URI_append_rpi = " \
+    file://0002-rpi_0_w-Add-configs-consistent-with-RpI3.patch \
+"
+
+DEPENDS_append_rpi = " rpi-u-boot-scr"