diff --git a/import-layers/meta-raspberrypi/recipes-kernel/linux/files/0001-menuconfig-check-lxdiaglog.sh-Allow-specification-of.patch b/import-layers/meta-raspberrypi/recipes-kernel/linux/files/0001-menuconfig-check-lxdiaglog.sh-Allow-specification-of.patch
new file mode 100644
index 0000000..a9e9213
--- /dev/null
+++ b/import-layers/meta-raspberrypi/recipes-kernel/linux/files/0001-menuconfig-check-lxdiaglog.sh-Allow-specification-of.patch
@@ -0,0 +1,62 @@
+From e6ebc8e654bba53f28af5229a1069fc74fa58b7b Mon Sep 17 00:00:00 2001
+From: Jason Wessel <jason.wessel@windriver.com>
+Date: Thu, 25 Sep 2014 11:26:49 -0700
+Subject: [PATCH] menuconfig,check-lxdiaglog.sh: Allow specification of ncurses
+ location
+
+In some cross build environments such as the Yocto Project build
+environment it provides an ncurses library that is compiled
+differently than the host's version.  This causes display corruption
+problems when the host's curses includes are used instead of the
+includes from the provided compiler are overridden.  There is a second
+case where there is no curses libraries at all on the host system and
+menuconfig will just fail entirely.
+
+The solution is simply to allow an override variable in
+check-lxdialog.sh for environments such as the Yocto Project.  Adding
+a CROSS_CURSES_LIB and CROSS_CURSES_INC solves the issue and allowing
+compiling and linking against the right headers and libraries.
+
+Upstream-Status: submitted [https://lkml.org/lkml/2013/3/3/103]
+
+Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
+cc: Michal Marek <mmarek@suse.cz>
+cc: linux-kbuild@vger.kernel.org
+Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
+Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
+---
+ scripts/kconfig/lxdialog/check-lxdialog.sh | 8 ++++++++
+ 1 file changed, 8 insertions(+)
+ mode change 100755 => 100644 scripts/kconfig/lxdialog/check-lxdialog.sh
+
+diff --git a/scripts/kconfig/lxdialog/check-lxdialog.sh b/scripts/kconfig/lxdialog/check-lxdialog.sh
+old mode 100755
+new mode 100644
+index 5075ebf2d3b9..ba9242101190
+--- a/scripts/kconfig/lxdialog/check-lxdialog.sh
++++ b/scripts/kconfig/lxdialog/check-lxdialog.sh
+@@ -4,6 +4,10 @@
+ # What library to link
+ ldflags()
+ {
++	if [ "$CROSS_CURSES_LIB" != "" ]; then
++		echo "$CROSS_CURSES_LIB"
++		exit
++	fi
+ 	pkg-config --libs ncursesw 2>/dev/null && exit
+ 	pkg-config --libs ncurses 2>/dev/null && exit
+ 	for ext in so a dll.a dylib ; do
+@@ -21,6 +25,10 @@ ldflags()
+ # Where is ncurses.h?
+ ccflags()
+ {
++	if [ x"$CROSS_CURSES_INC" != x ]; then
++		echo "$CROSS_CURSES_INC"
++		exit
++	fi
+ 	if pkg-config --cflags ncursesw 2>/dev/null; then
+ 		echo '-DCURSES_LOC="<ncurses.h>" -DNCURSES_WIDECHAR=1'
+ 	elif pkg-config --cflags ncurses 2>/dev/null; then
+-- 
+2.14.3
+
diff --git a/import-layers/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi-dev.bb b/import-layers/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi-dev.bb
index b947659..4a7db1a 100644
--- a/import-layers/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi-dev.bb
+++ b/import-layers/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi-dev.bb
@@ -7,13 +7,14 @@
 
 FILESEXTRAPATHS_prepend := "${THISDIR}/linux-raspberrypi:"
 
-LINUX_VERSION ?= "4.13"
-LINUX_RPI_DEV_BRANCH ?= "rpi-4.13.y"
+LINUX_VERSION ?= "4.16"
+LINUX_RPI_DEV_BRANCH ?= "rpi-4.16.y"
 
 SRCREV = "${AUTOREV}"
-SRC_URI = "git://github.com/raspberrypi/linux.git;protocol=git;branch=${LINUX_RPI_DEV_BRANCH} \
-           file://0001-build-arm64-Add-rules-for-.dtbo-files-for-dts-overla.patch \
-"
+SRC_URI = " \
+    git://github.com/raspberrypi/linux.git;protocol=git;branch=${LINUX_RPI_DEV_BRANCH} \
+    file://0001-menuconfig-check-lxdiaglog.sh-Allow-specification-of.patch \
+    "
 require linux-raspberrypi.inc
 
 # Disable version check so that we don't have to edit this recipe every time
diff --git a/import-layers/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi-dev/0001-build-arm64-Add-rules-for-.dtbo-files-for-dts-overla.patch b/import-layers/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi-dev/0001-build-arm64-Add-rules-for-.dtbo-files-for-dts-overla.patch
deleted file mode 100644
index e8bc52e..0000000
--- a/import-layers/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi-dev/0001-build-arm64-Add-rules-for-.dtbo-files-for-dts-overla.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 922ce1fd0eb810b713f6ffa9a7ab97c11b6e38cf Mon Sep 17 00:00:00 2001
-From: Khem Raj <raj.khem@gmail.com>
-Date: Fri, 10 Feb 2017 17:57:08 -0800
-Subject: [PATCH] build/arm64: Add rules for .dtbo files for dts overlays
-
-We now create overlays as .dtbo files.
-
-Signed-off-by: Khem Raj <raj.khem@gmail.com>
----
- arch/arm64/Makefile | 3 +++
- 1 file changed, 3 insertions(+)
-
-diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
-index 3635b8662724..822fefeb1cd0 100644
---- a/arch/arm64/Makefile
-+++ b/arch/arm64/Makefile
-@@ -113,6 +113,9 @@ zinstall install:
- %.dtb: scripts
- 	$(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@
- 
-+%.dtbo: | scripts
-+	$(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $(boot)/dts/$@
-+
- PHONY += dtbs dtbs_install
- 
- dtbs: prepare scripts
--- 
-2.11.1
-
diff --git a/import-layers/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi.inc b/import-layers/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi.inc
index da36ca7..65c2ab7 100644
--- a/import-layers/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi.inc
+++ b/import-layers/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi.inc
@@ -19,26 +19,21 @@
 KBUILD_DEFCONFIG_raspberrypi3-64 ?= "bcmrpi3_defconfig"
 
 # CMDLINE for raspberrypi
-CMDLINE ?= "dwc_otg.lpm_enable=0 console=serial0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait"
+SERIAL = "${@oe.utils.conditional("ENABLE_UART", "1", "console=serial0,115200", "", d)}"
+CMDLINE ?= "dwc_otg.lpm_enable=0 ${SERIAL} root=/dev/mmcblk0p2 rootfstype=ext4 rootwait"
 
 # Add the kernel debugger over console kernel command line option if enabled
-CMDLINE_append = ' ${@base_conditional("ENABLE_KGDB", "1", "kgdboc=serial0,115200", "", d)}'
+CMDLINE_append = ' ${@oe.utils.conditional("ENABLE_KGDB", "1", "kgdboc=serial0,115200", "", d)}'
 
 # Disable rpi logo on boot
-CMDLINE_append += ' ${@base_conditional("DISABLE_RPI_BOOT_LOGO", "1", "logo.nologo", "", d)}'
+CMDLINE_append += ' ${@oe.utils.conditional("DISABLE_RPI_BOOT_LOGO", "1", "logo.nologo", "", d)}'
 
 # You can define CMDLINE_DEBUG as "debug" in your local.conf or distro.conf
 # to enable kernel debugging.
 CMDLINE_DEBUG ?= ""
 CMDLINE_append = " ${CMDLINE_DEBUG}"
 
-# Quirk for udev greater or equal 141
-UDEV_GE_141 ?= "1"
-
-# Enable OABI compat for people stuck with obsolete userspace
-ARM_KEEP_OABI ?= "1"
-
-KERNEL_INITRAMFS ?= '${@base_conditional("INITRAMFS_IMAGE_BUNDLE", "1", "1", "", d)}'
+KERNEL_INITRAMFS ?= '${@oe.utils.conditional("INITRAMFS_IMAGE_BUNDLE", "1", "1", "", d)}'
 
 KERNEL_MODULE_AUTOLOAD += "${@bb.utils.contains("MACHINE_FEATURES", "pitft28r", "stmpe-ts", "", d)}"
 
@@ -61,83 +56,54 @@
     fi
 }
 
+config_setup() {
+    # From kernel.bbclass. Unfortunately, this is needed to support builds that
+    # use devtool. The reason is as follows:
+    #
+    # - In devtool builds, externalsrc.bbclass gets inherited and sets a list of
+    # SRCTREECOVEREDTASKS, which don't get run because they affect the source
+    # tree and, when using devtool, we want the developer's changes to be the
+    # single source of truth. kernel-yocto.bbclass adds do_kernel_configme to
+    # SRCTREECOVEREDTASKS, so it doesn't run in a devtool build., In a normal
+    # non-devtool build, do_kernel_configme creates ${B}.config.
+    #
+    # - Normally (e.g. in linux-yocto), it would be OK that do_kernel_configme
+    # doesn't run, because the first few lines of do_configure in kernel.bbclass
+    # populate ${B}.config from either ${S}.config (if it exists) for custom
+    # developer changes, or otherwise from ${WORDIR}/defconfig.
+    #
+    # - In linux-raspberrypi, we add do_configure_prepend, which tweaks
+    # ${B}.config. Since this runs *before* the kernel.bbclass do_configure,
+    # ${B}.config doesn't yet exist and we hit an error. Thus we need to move
+    # the logic from do_configure up to before our do_configure_prepend. Because
+    # we are copying only a portion of do_configure and not the whole thing,
+    # there is no clean way to do it using OE functionality, so we just
+    # copy-and-paste.
+    if [ "${S}" != "${B}" ] && [ -f "${S}/.config" ] && [ ! -f "${B}/.config" ]; then
+        mv "${S}/.config" "${B}/.config"
+    fi
+
+    # Copy defconfig to .config if .config does not exist. This allows
+    # recipes to manage the .config themselves in do_configure_prepend().
+    if [ -f "${WORKDIR}/defconfig" ] && [ ! -f "${B}/.config" ]; then
+        cp "${WORKDIR}/defconfig" "${B}/.config"
+    fi
+}
+
 do_configure_prepend() {
+    config_setup
+
     mv -f ${B}/.config ${B}/.config.patched
     CONF_SED_SCRIPT=""
 
-    # oabi / eabi support
-    kernel_configure_variable AEABI y
-    if [ "${ARM_KEEP_OABI}" = "1" ] ; then
-        kernel_configure_variable OABI_COMPAT y
-    else
-        kernel_configure_variable OABI_COMPAT n
-    fi
-
-    # Set cmdline
-    kernel_configure_variable CMDLINE "\"${CMDLINE}\""
-
     # Localversion
     kernel_configure_variable LOCALVERSION "\"\""
-    kernel_configure_variable LOCALVERSION_AUTO n
 
-    # Udev quirks
-    # Newer versions of udev mandate that sysfs doesn't have deprecated entries
-    if [ "${UDEV_GE_141}" = "1" ] ; then
-        kernel_configure_variable SYSFS_DEPRECATED n
-        kernel_configure_variable SYSFS_DEPRECATED_V2 n
-        kernel_configure_variable HOTPLUG y
-        kernel_configure_variable UEVENT_HELPER_PATH "\"\""
-        kernel_configure_variable UNIX y
-        kernel_configure_variable SYSFS y
-        kernel_configure_variable PROC_FS y
-        kernel_configure_variable TMPFS y
-        kernel_configure_variable INOTIFY_USER y
-        kernel_configure_variable SIGNALFD y
-        kernel_configure_variable TMPFS_POSIX_ACL y
-        kernel_configure_variable BLK_DEV_BSG y
-        kernel_configure_variable DEVTMPFS y
-        kernel_configure_variable DEVTMPFS_MOUNT y
-    fi
-
-    # Newer inits like systemd need cgroup support
-    if [ "${KERNEL_ENABLE_CGROUPS}" = "1" ] ; then
-        kernel_configure_variable CGROUP_SCHED y
-        kernel_configure_variable CGROUPS y
-        kernel_configure_variable CGROUP_NS y
-        kernel_configure_variable CGROUP_FREEZER y
-        kernel_configure_variable CGROUP_DEVICE y
-        kernel_configure_variable CPUSETS y
-        kernel_configure_variable PROC_PID_CPUSET y
-        kernel_configure_variable CGROUP_CPUACCT y
-        kernel_configure_variable RESOURCE_COUNTERS y
-    fi
-
-    # root-over-nfs-over-usb-eth support. Limited, but should cover some cases
-    # Enable this by setting a proper CMDLINE_NFSROOT_USB.
-    if [ ! -z "${CMDLINE_NFSROOT_USB}" ]; then
-        oenote "Configuring the kernel for root-over-nfs-over-usb-eth with CMDLINE ${CMDLINE_NFSROOT_USB}"
-        kernel_configure_variable INET y
-        kernel_configure_variable IP_PNP y
-        kernel_configure_variable USB_GADGET y
-        kernel_configure_variable USB_GADGET_SELECTED y
-        kernel_configure_variable USB_ETH y
-        kernel_configure_variable NFS_FS y
-        kernel_configure_variable ROOT_NFS y
-        kernel_configure_variable ROOT_NFS y
-        kernel_configure_variable CMDLINE "\"${CMDLINE_NFSROOT_USB}\""
-    fi
     if [ ! -z "${KERNEL_INITRAMFS}" ]; then
-        kernel_configure_variable BLK_DEV_INITRD y
-        kernel_configure_variable INITRAMFS_SOURCE ""
-        kernel_configure_variable RD_GZIP y
         kernel_configure_variable OVERLAY_FS y
         kernel_configure_variable SQUASHFS y
         kernel_configure_variable UBIFS_FS y
     fi
-    # Activate CONFIG_LEGACY_PTYS
-    kernel_configure_variable LEGACY_PTYS y
-    # this module is built externally via drbd-utils
-    kernel_configure_variable BLK_DEV_DRBD n
 
     # Activate the configuration options for VC4
     VC4GRAPHICS="${@bb.utils.contains("MACHINE_FEATURES", "vc4graphics", "1", "0", d)}"
@@ -152,8 +118,6 @@
     # Remove all modified configs and add the rest to .config
     sed -e "${CONF_SED_SCRIPT}" < '${B}/.config.patched' >> '${B}/.config'
     rm -f ${B}/.config.patched
-
-    yes '' | oe_runmake oldconfig
 }
 
 do_compile_append_raspberrypi3-64() {
@@ -161,10 +125,6 @@
     oe_runmake dtbs CC="${KERNEL_CC} $cc_extra " LD="${KERNEL_LD}" ${KERNEL_EXTRA_ARGS}
 }
 
-do_install_prepend() {
-    install -d ${D}/lib/firmware
-}
-
 do_deploy_append() {
     # Deploy cmdline.txt
     install -d ${DEPLOYDIR}/bcm2835-bootfiles
diff --git a/import-layers/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_4.14.bb b/import-layers/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_4.14.bb
new file mode 100644
index 0000000..0478576
--- /dev/null
+++ b/import-layers/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_4.14.bb
@@ -0,0 +1,9 @@
+LINUX_VERSION ?= "4.14.39"
+
+SRCREV = "865ddc1393f558198e7e7ce70928ff2e49c4f7f6"
+SRC_URI = " \
+    git://github.com/raspberrypi/linux.git;branch=rpi-4.14.y \
+    file://0001-menuconfig-check-lxdiaglog.sh-Allow-specification-of.patch \
+    "
+
+require linux-raspberrypi.inc
diff --git a/import-layers/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_4.9.bb b/import-layers/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_4.9.bb
index 061e893..21fcfef 100644
--- a/import-layers/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_4.9.bb
+++ b/import-layers/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_4.9.bb
@@ -1,8 +1,11 @@
 FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}-${PV}:"
 
-LINUX_VERSION ?= "4.9.59"
+LINUX_VERSION ?= "4.9.80"
 
-SRCREV = "e7976b2affa8c05bd299ead0ad9c36ddaf135b9d"
-SRC_URI = "git://github.com/raspberrypi/linux.git;branch=rpi-4.9.y"
+SRCREV = "ffd7bf4085b09447e5db96edd74e524f118ca3fe"
+SRC_URI = " \
+    git://github.com/raspberrypi/linux.git;branch=rpi-4.9.y \
+    file://0001-menuconfig-check-lxdiaglog.sh-Allow-specification-of.patch \
+    "
 
 require linux-raspberrypi.inc