diff --git a/import-layers/yocto-poky/documentation/sdk-manual/sdk-using.xml b/import-layers/yocto-poky/documentation/sdk-manual/sdk-using.xml
index 7281e83..dd220c3 100644
--- a/import-layers/yocto-poky/documentation/sdk-manual/sdk-using.xml
+++ b/import-layers/yocto-poky/documentation/sdk-manual/sdk-using.xml
@@ -19,9 +19,9 @@
 
     <para>
         You can use a standard SDK to work on Makefile, Autotools, and
-        Eclipse-based projects.
+        <trademark class='trade'>Eclipse</trademark>-based projects.
         See the
-        "<link linkend='sdk-working-projects'>Working with Different Types of Projects</link>"
+        "<link linkend='sdk-working-projects'>Using the SDK Toolchain Directly</link>"
         chapter for more information.
     </para>
 
@@ -53,24 +53,24 @@
         <title>Installing the SDK</title>
 
         <para>
-            The first thing you need to do is install the SDK on your host
-            development machine by running the <filename>*.sh</filename>
-            installation script.
+            The first thing you need to do is install the SDK on your
+            <ulink url='&YOCTO_DOCS_REF_URL;#hardware-build-system-term'>Build Host</ulink>
+            by running the <filename>*.sh</filename> installation script.
         </para>
 
         <para>
             You can download a tarball installer, which includes the
             pre-built toolchain, the <filename>runqemu</filename>
-            script, and support files from the appropriate directory under
-            <ulink url='&YOCTO_TOOLCHAIN_DL_URL;'></ulink>.
-            Toolchains are available for 32-bit and 64-bit x86 development
-            systems from the <filename>i686</filename> and
-            <filename>x86_64</filename> directories, respectively.
+            script, and support files from the appropriate
+            <ulink url='&YOCTO_TOOLCHAIN_DL_URL;'>toolchain</ulink>
+            directory within the Index of Releases.
+            Toolchains are available for several 32-bit and 64-bit
+            architectures with the <filename>x86_64</filename> directories,
+            respectively.
             The toolchains the Yocto Project provides are based off the
-            <filename>core-image-sato</filename> image and contain
+            <filename>core-image-sato</filename> and
+            <filename>core-image-minimal</filename> images and contain
             libraries appropriate for developing against that image.
-            Each type of development system supports five or more target
-            architectures.
         </para>
 
         <para>
@@ -86,14 +86,15 @@
 
                     i686 or x86_64.
 
-         <replaceable>image_type</replaceable> is the image for which the SDK was built.
+         <replaceable>image_type</replaceable> is the image for which the SDK was built:
+
+                    core-image-minimal or core-image-sato.
 
          <replaceable>arch</replaceable> is a string representing the tuned target architecture:
 
-                    i586, x86_64, powerpc, mips, armv7a or armv5te
+                    aarch64, armv5e, core2-64, i586, mips32r2, mips64, ppc7400, or cortexa8hf-neon.
 
-         <replaceable>release_version</replaceable> is a string representing the release number of the
-                Yocto Project:
+         <replaceable>release_version</replaceable> is a string representing the release number of the Yocto Project:
 
                     &DISTRO;, &DISTRO;+snapshot
             </literallayout>
@@ -120,38 +121,36 @@
 
         <para>
             The SDK and toolchains are self-contained and by default are
-            installed into <filename>/opt/poky</filename>.
-            However, when you run the SDK installer, you can choose an
-            installation directory.
-            <note>
-                You must change the permissions on the SDK
-                installer script so that it is executable:
-                <literallayout class='monospaced'>
-     $ chmod +x poky-glibc-x86_64-core-image-sato-i586-toolchain-&DISTRO;.sh
-                </literallayout>
-            </note>
+            installed into the <filename>poky_sdk</filename> folder in your
+            home directory.
+            You can choose to install the extensible SDK in any location when
+            you run the installer.
+            However, because files need to be written under that directory
+            during the normal course of operation, the location you choose
+            for installation must be writable for whichever
+            users need to use the SDK.
         </para>
 
         <para>
             The following command shows how to run the installer given a
             toolchain tarball for a 64-bit x86 development host system and
-            a 32-bit x86 target architecture.
+            a 64-bit x86 target architecture.
             The example assumes the SDK installer is located in
-            <filename>~/Downloads/</filename>.
+            <filename>~/Downloads/</filename> and has execution rights.
             <note>
                 If you do not have write permissions for the directory
                 into which you are installing the SDK, the installer
                 notifies you and exits.
-                Be sure you have write permissions in the directory and
-                run the installer again.
+                For that case, set up the proper permissions in the directory
+                and run the installer again.
             </note>
             <literallayout class='monospaced'>
-     $ ./poky-glibc-x86_64-core-image-sato-i586-toolchain-&DISTRO;.sh
+     $ ./Downloads/poky-glibc-x86_64-core-image-sato-i586-toolchain-&DISTRO;.sh
      Poky (Yocto Project Reference Distro) SDK installer version &DISTRO;
      ===============================================================
      Enter target directory for SDK (default: /opt/poky/&DISTRO;):
      You are about to install the SDK to "/opt/poky/&DISTRO;". Proceed[Y/n]? Y
-     Extracting SDK.......................................................................done
+     Extracting SDK........................................ ..............................done
      Setting it up...done
      SDK has been successfully set up and is ready to be used.
      Each time you wish to use the SDK in a new shell session, you need to source the environment setup script e.g.
@@ -172,12 +171,11 @@
 
         <para>
             Once you have the SDK installed, you must run the SDK environment
-            setup script before you can actually use it.
+            setup script before you can actually use the SDK.
             This setup script resides in the directory you chose when you
-            installed the SDK.
-            For information on where this setup script can reside, see the
-            "<link linkend='sdk-appendix-obtain'>Obtaining the SDK</link>"
-            Appendix.
+            installed the SDK, which is either the default
+            <filename>/opt/poky/&DISTRO;</filename> directory or the directory
+            you chose during installation.
         </para>
 
         <para>
@@ -186,9 +184,11 @@
             Environment setup scripts begin with the string
             "<filename>environment-setup</filename>" and include as part of
             their name the tuned target architecture.
-            For example, the command to source a setup script for an IA-based
-            target machine using i586 tuning and located in the default SDK
-            installation directory is as follows:
+            As an example, the following commands set the working directory
+            to where the SDK was installed and then source the environment
+            setup script.
+            In this example, the setup script is for an IA-based
+            target machine using i586 tuning:
             <literallayout class='monospaced'>
      $ source /opt/poky/&DISTRO;/environment-setup-i586-poky-linux
             </literallayout>