sensors:p10bmc:Add power-supply hwmon configs
Add the power-supply configuration files for the ibm-cffps power
supplies used in the Rainier and Everest systems in order to get
telemetry data added to D-Bus via phosphor-hwmon.
Rainier power supplies on bus 3 at 0x68, 0x69, 0x6a, and 0x6b.
Everest power supplies on bus 3 at 0x68, 0x69, 0x6d, and 0x6b. Older
hardware has power supply at 0x6a instead of 0x6d.
Input voltage, input power, output voltage, and output current.
No critical or warning low values, to avoid logging errors when AC is
pulled, or other fault conditions handled by the PSU monitor. AC loss,
brownout, over-voltage, over-current, and other conditions should be
handled by the PSU monitor application.
No critical/warning high values, for similar doubled up fault logging.
Change-Id: I9f39e41e2dd0a7b77910207322506d8376f98772
Signed-off-by: Brandon Wyman <bjwyman@gmail.com>
diff --git a/meta-ibm/recipes-phosphor/sensors/phosphor-hwmon/p10bmc/obmc/hwmon/ahb/apb/bus@1e78a000/i2c-bus@200/power-supply@6a.conf b/meta-ibm/recipes-phosphor/sensors/phosphor-hwmon/p10bmc/obmc/hwmon/ahb/apb/bus@1e78a000/i2c-bus@200/power-supply@6a.conf
new file mode 100644
index 0000000..c9e6b64
--- /dev/null
+++ b/meta-ibm/recipes-phosphor/sensors/phosphor-hwmon/p10bmc/obmc/hwmon/ahb/apb/bus@1e78a000/i2c-bus@200/power-supply@6a.conf
@@ -0,0 +1,7 @@
+LABEL_in1="ps2_input_voltage"
+
+LABEL_in3="ps2_output_voltage"
+
+LABEL_curr1="ps2_output_current"
+
+LABEL_power1="ps2_input_power"