subtree updates openembedded poky

meta-openembedded: 491b7592f4..eff1b182c1:
  Alejandro Hernandez Samaniego (1):
        emacs: update to 29.1

  Archana Polampalli (2):
        python3-pyroute2: fix ptest failure
        nodejs: upgrade 18.17.0 -> 18.17.1

  Bartosz Golaszewski (1):
        libgpiod: update to v2.0.2

  Beniamin Sandu (3):
        unbound: upgrade 1.17.1 -> 1.18.0
        mbedtls: upgrade 3.4.0 -> 3.4.1
        mbedtls: upgrade 2.28.3 -> 2.28.4

  Benjamin Bara (3):
        libvpx: fix VPXTARGET for non-neon armv7a
        ne10: set incompatible for armv7 without neon
        openh264: make neon optional and disable if not supported

  Chaitanya Vadrevu (1):
        bolt: Add recipe

  Chen Qi (2):
        spice-protocol: fix populate_sdk error when spice is installed
        python3-blivetgui: switch from master to main

  Christophe Vu-Brugier (1):
        sg3-utils: upgrade 1.47 -> 1.48

  Danik (2):
        python3-gspread: interface for google spreadsheet
        python3-piccata: piccata - a simple CoAP toolkit added

  Denys Zagorui (1):
        bpftool: add native and nativesdk support

  Emil Kronborg Andersen (3):
        lcms: add CVE_PRODUCT
        snappy: add CVE_PRODUCT
        libopus: add CVE_PRODUCT

  Enrico Jorns (1):
        microcom: add new recipe

  Ewa Kujawska (1):
        python3-oauth2client_4.1.2.bb: recipe added

  Frieder Schrempf (1):
        python3-can: Add missing runtime dependencies

  Gianfranco Costamagna (1):
        dlt-daemon: upgrade 2.18.9 -> 2.18.10 (commit: 0f2d4cfffada6f8448a2cb27995b38eb4271044f)

  Joe Slater (1):
        python3-inotify: fix tests

  Justin Bronder (5):
        python3-mypy-extensions: upgrade 0.4.3 -> 1.0.0
        python3-types-setuptools: add 68.0.0.3
        python3-typed-ast: remove EOL package
        python3-types-psutil: add 5.9.5.16
        python3-mypy: upgrade 0.971 -> 1.5.0

  Kai Kang (1):
        libmcrypt: fix multilib conflict

  Khem Raj (31):
        qad: Fix build with clang
        python3-dominate: Fix get_thread_context ptest on musl
        perfetto: Add SRCREV_FORMAT
        gosu: Define SRCREV_FORMAT
        libsdl2-ttf: Define SRCREV_FORMAT
        gosu: Define SRCREV_FORMAT
        sysdig: Add SRCREV_FORMAT
        cockpit: Upgrade to 298 release
        librelp: Fix function prototypes in tests
        jemalloc: Unbolt clang workaroud
        python3-protobuf: Fix build errors seen with clang
        mariadb: Fix build with libfmt 10.1+
        librelp: Add packageconfigs for TLS implementations
        librelp: Fix ptests builds on musl
        librelp: Fix ptest installs to work with dash
        librelp: Add to meta-oe ptest image
        liburing: Upgrade to 2.4 release
        rsyslog: Enable openssl transport by default
        libio-socket-ssl-perl: Upgrade to 2.083
        libfaketime: Fix build with clang
        libfaketime: Eanable LFS64 on musl
        python3-lz4: Drop using PYTHON_PN
        python3-lz4: Add missing rdeps needed for ptests
        rsyslog: Skip failing omfile-outchannel test on musl
        python3-m2crypto: Append architecture to SWIG_FEATURES instead of overriding
        networkmanager: Fix build on musl
        network-manager-applet: Fix build with musl/lld linker
        networkmanager-openvpn: Fix build with lld on musl
        openconnect: Upgrade to 9.12
        openconnect: Fix build with GnuTLS v3.8.1
        fontforge: Fix build with gettext 0.22

  Kirk Hays (1):
        jack: Drop dependency on readline

  Leon Anavi (2):
        aml: add new recipe
        neatvnc: add new recipe

  Marek Vasut (2):
        libiio: Use tagged v0.25
        libiio: Rename to versioned recipe filename

  Marine Vovard (1):
        python3-kivy: Require X11 or Wayland in DISTRO_FEATURES

  Mark Hatle (1):
        kconfig-frontends: Avoid using hard coded /usr/include paths

  Markus Volk (28):
        gvfs: update 1.51.1 -> 1.51.90
        gnome-themes-extra: fix datadir path
        libnice: add graphviz-native dependency
        libcanberra: fix api-documentation build
        libgweather4: fix api-documentation build
        appstream: disable docs
        gtksourceview5: fix api-documentation build
        libpeas: fix api-documentation build
        nautilus: fix api-documentation build
        evince: fix api-documentation build
        usbids: add recipe
        libcacard: add recipe
        usbredir: upgrade 0.9.0 -> 0.13.0
        spice: upgrade 0.14.2 -> 0.15.2
        gnome-remote-desktop: add recipe
        libosinfo: add recipe
        gnome-boxes: add recipe
        pipewire: upgrade 0.3.77 -> 0.3.78
        spice-gtk: fix api-documentation build
        flatpak: fix api-documentation build
        phodav: add recipe
        libdecor: update to latest commit
        spice-guest-vdagent: add recipe
        pipewire: upgrade 0.3.78 -> 0.3.79
        spice: add missing dependency on orc
        spice-guest-vdagent: add missing dependencies
        libosinfo: build vapi only if gobject-introspection is enabled
        gnome-boxes: remove dependency on ovmf

  Martin Jansa (12):
        openh264: fix installed-vs-shared QA issue with multilib
        libfaketime: simplify packaging
        json-schema-validator: restore 0004-cmake-Use-GNUInstallDirs.patch
        phodav: make sure systemd files are packaged correctly
        sysbench: avoid -L/usr/lib32 and configure-unsafe QA issue
        mongodb: enable hardware crc32 only with crc in TUNE_FEATURES
        khronos-cts.inc: respect MLPREFIX when appending DEPENDS with anonymous python
        libcyusbserial: fix installed-vs-shipped QA issue with multilib
        tcpreplay: fix pcap detection with /usr/lib32 multilib
        libiio: use main branch instead of master
        webkitgtk: explicitly disable JIT for armv7* with softfp
        layer.conf: update LAYERSERIES_COMPAT for nanbield

  Ming Liu (1):
        libusbgx: usbgx.service: use Type=oneshot

  Mingli Yu (4):
        mariadb: Upgrade to 10.11.5
        dialog: Update the SRC_URI
        gnulib: Update SRC_URI
        thrift: Remove buildpaths

  Nicolas Marguet (1):
        librelp: add ptest

  Parian Golchin (1):
        json-schema-validator: Updrade to 2.2.0

  Pawel Langowski (1):
        qcbor: add recipe

  Petr Chernikov (1):
        Fix empty 0.0.0-0-g0 jemalloc version by adding --with-version

  Petr Gotthard (1):
        python3-sdbus: add recipe

  Robert Yang (1):
        frr: Fix CVE-2023-41358 and CVE-2023-41360

  Roger Knecht (1):
        python3-schedule: add recipe

  Roland Hieber (1):
        fbida: update Upstream-Status for submitted patches

  Ross Burton (1):
        Revert "protobuf: stage protoc binary to sysroot"

  Soumya (1):
        yasm: fix CVE-2023-37732

  Soumya Sambu (1):
        krb5: Upgrade 1.20.1 -> 1.20.2

  Sourav Kumar Pramanik (1):
        meta-oe-components: Avoid usage of nobranch=1

  Sourav Pramanik (2):
        rapidjson: Avoid usage of nobranch=1
        nlohmann-json: Avoid usage of nobranch=1

  Stanislav Angelovic (1):
        feat: bump sdbus-c++ up to v1.3.0

  Sudip Mukherjee (1):
        qad: Add initial recipe

  Trevor Gamblin (1):
        python3-kivy: fix filename

  Tymoteusz Burak (2):
        ttf-google-fira: add recipe
        libfaketime: add recipe

  Vincent Davis Jr (1):
        cglm: upgrade v0.8.9 -> v0.9.1

  Wang Mingyu (108):
        libcloudproviders: upgrade 0.3.1 -> 0.3.2
        chrony: upgrade 4.3 -> 4.4
        networkmanager: upgrade 1.42.8 -> 1.44.0
        weechat: upgrade 4.0.2 -> 4.0.3
        ctags: upgrade 6.0.20230730.0 -> 6.0.20230813.0
        fmt: upgrade 10.0.0 -> 10.1.0
        gensio: upgrade 2.6.7 -> 2.7.2
        googletest: upgrade 1.13.0 -> 1.14.0
        lvgl: upgrade 8.3.8 -> 8.3.9
        postgresql: upgrade 15.3 -> 15.4
        smartmontools: upgrade 7.3 -> 7.4
        xdg-dbus-proxy: upgrade 0.1.4 -> 0.1.5
        yaml-cpp: upgrade 0.7.0 -> 0.8.0
        libtest-harness-perl: upgrade 3.44 -> 3.47
        python3-alembic: upgrade 1.11.1 -> 1.11.2
        python3-async-timeout: upgrade 4.0.2 -> 4.0.3
        python3-bitarray: upgrade 2.8.0 -> 2.8.1
        python3-cmake: upgrade 3.27.0 -> 3.27.2
        python3-coverage: upgrade 7.2.7 -> 7.3.0
        python3-dnspython: upgrade 2.4.1 -> 2.4.2
        python3-google-api-python-client: upgrade 2.95.0 -> 2.96.0
        python3-googleapis-common-protos: upgrade 1.59.1 -> 1.60.0
        python3-joblib: upgrade 1.3.1 -> 1.3.2
        python3-luma-oled: upgrade 3.12.0 -> 3.13.0
        python3-platformdirs: upgrade 3.9.1 -> 3.10.0
        python3-pycodestyle: upgrade 2.10.0 -> 2.11.0
        python3-pyflakes: upgrade 3.0.1 -> 3.1.0
        python3-pymisp: upgrade 2.4.173 -> 2.4.174
        python3-rdflib: upgrade 6.3.2 -> 7.0.0
        python3-regex: upgrade 2023.6.3 -> 2023.8.8
        python3-rich: upgrade 13.4.2 -> 13.5.2
        python3-sh: upgrade 2.0.4 -> 2.0.6
        python3-tox: upgrade 4.6.4 -> 4.8.0
        python3-tqdm: upgrade 4.65.0 -> 4.66.1
        python3-uefi-firmware: upgrade 1.10 -> 1.11
        python3-virtualenv: upgrade 20.24.2 -> 20.24.3
        python3-web3: upgrade 6.7.0 -> 6.8.0
        python3-yamlloader: upgrade 1.2.2 -> 1.3.2
        python3-zeroconf: upgrade 0.71.4 -> 0.76.0
        python3-protobuf: upgrade 4.23.4 -> 4.24.0
        ctags: upgrade 6.0.20230813.0 -> 6.0.20230820.0
        debootstrap: upgrade 1.0.128 -> 1.0.131
        gensio: upgrade 2.7.2 -> 2.7.4
        gnome-bluetooth: upgrade 42.5 -> 42.6
        nginx: upgrade 1.25.1 -> 1.25.2
        geary: update 44.0 -> 44.1
        php: upgrade 8.2.8 -> 8.2.9
        python3-redis: upgrade 4.6.0 -> 5.0.0
        python3-alembic: upgrade 1.11.2 -> 1.11.3
        python3-awesomeversion: upgrade 23.5.0 -> 23.8.0
        python3-bitstring: upgrade 4.0.2 -> 4.1.0
        python3-click: upgrade 8.1.6 -> 8.1.7
        python3-engineio: upgrade 4.5.1 -> 4.6.0
        python3-google-api-python-client: upgrade 2.96.0 -> 2.97.0
        python3-humanize: upgrade 4.7.0 -> 4.8.0
        python3-mypy: upgrade 1.5.0 -> 1.5.1
        python3-oauth2client: upgrade 4.1.2 -> 4.1.3
        python3-protobuf: upgrade 4.24.0 -> 4.24.1
        python3-pycocotools: upgrade 2.0.6 -> 2.0.7
        python3-pymetno: upgrade 0.10.0 -> 0.11.0
        python3-pymongo: upgrade 4.4.1 -> 4.5.0
        python3-pywbem: upgrade 1.6.1 -> 1.6.2
        python3-sqlalchemy: upgrade 2.0.19 -> 2.0.20
        python3-tox: upgrade 4.8.0 -> 4.10.0
        python3-typeguard: upgrade 4.1.0 -> 4.1.2
        python3-types-setuptools: upgrade 68.0.0.3 -> 68.1.0.0
        python3-zeroconf: upgrade 0.76.0 -> 0.82.1
        redis: upgrade 7.0.12 -> 7.2.0
        weechat: upgrade 4.0.3 -> 4.0.4
        traceroute: upgrade 2.1.2 -> 2.1.3
        wireshark: upgrade 4.0.7 -> 4.0.8
        adw-gtk3: upgrade 4.8 -> 4.9
        ctags: upgrade 6.0.20230820.0 -> 6.0.20230827.0
        debootstrap: upgrade 1.0.131 -> 1.0.132
        dialog: upgrade 1.3-20210509 -> 1.3-20230209
        fmt: upgrade 10.1.0 -> 10.1.1
        gensio: upgrade 2.7.4 -> 2.7.5
        iwd: upgrade 2.7 -> 2.8
        libgphoto2: upgrade 2.5.30 -> 2.5.31
        libzip: upgrade 1.10.0 -> 1.10.1
        logwatch: upgrade 7.8 -> 7.9
        thrift: upgrade 0.18.1 -> 0.19.0
        libnet-dns-perl: upgrade 1.39 -> 1.40
        python3-alembic: upgrade 1.11.3 -> 1.12.0
        python3-argh: upgrade 0.28.1 -> 0.29.3
        python3-asttokens: upgrade 2.2.1 -> 2.4.0
        python3-bitstring: upgrade 4.1.0 -> 4.1.1
        python3-cmake: upgrade 3.27.2 -> 3.27.4.1
        python3-diskcache: upgrade 5.6.1 -> 5.6.3
        python3-engineio: upgrade 4.6.0 -> 4.7.0
        python3-imageio: upgrade 2.31.1 -> 2.31.3
        python3-ipython: upgrade 8.14.0 -> 8.15.0
        python3-kiwisolver: upgrade 1.4.4 -> 1.4.5
        python3-langtable: upgrade 0.0.62 -> 0.0.63
        python3-luma-core: upgrade 2.4.0 -> 2.4.1
        python3-protobuf: upgrade 4.24.1 -> 4.24.2
        python3-pymisp: upgrade 2.4.174 -> 2.4.175
        python3-pymodbus: upgrade 3.4.1 -> 3.5.0
        python3-smbus2: upgrade 0.4.2 -> 0.4.3
        python3-snagboot: upgrade 1.1 -> 1.2
        python3-socketio: upgrade 5.8.0 -> 5.9.0
        python3-soupsieve: upgrade 2.4.1 -> 2.5
        python3-tox: upgrade 4.10.0 -> 4.11.1
        python3-typeguard: upgrade 4.1.2 -> 4.1.3
        python3-types-setuptools: upgrade 68.1.0.0 -> 68.1.0.1
        python3-virtualenv: upgrade 20.24.3 -> 20.24.4
        python3-web3: upgrade 6.8.0 -> 6.9.0
        python3-zeroconf: upgrade 0.82.1 -> 0.97.0

  Willy Tu (1):
        abseil-cpp: upgrade 20230125.3 -> 20230802.0

  Yi Zhao (7):
        nftables: upgrade 1.0.7 -> 1.0.8
        libssh: upgrade 0.10.4 -> 0.10.5
        samba: upgrade 4.18.5 -> 4.18.6
        libyang: upgrade 2.1.55 -> 2.1.111
        frr: Security fix CVE-2023-3748
        vsomeip: add recipe
        ntp: add missing runtime dependencies

  Yogita Urade (2):
        poppler: fix CVE-2023-34872
        hwloc: fix CVE-2022-47022

  Βούλγαρη Αικατερίνη (1):
        collectd: build with rrdcached plugin

poky: 71282bbc53..61531cd395:
  Adrian Freihofer (2):
        cmake.bbclass: cleanup spaces and tabs
        cmake.bbclass: refactor cmake args

  Alberto Planas (1):
        bitbake.conf: add bunzip2 in HOSTTOOLS

  Alexander Kanavin (18):
        lib/oe/recipeutils.py: accommodate SRCPV being optional and deprecated in version check regex
        python3-sphinx: correct version check
        systemd-bootchart: musl fixes have been rejected upstream
        openssl: build and install manpages only if they are enabled
        gettext: upgrade 0.21.1 -> 0.22
        connman: update 1.41 -> 1.42
        libcgroup: update 3.0.0 -> 3.1.0
        perlcross: update 1.4.1 -> 1.5
        perl: update 5.36.1 -> 5.38.0
        groff: update 1.22.4 -> 1.23.0
        libglu: update 9.0.2 -> 9.0.3
        libpthread-stubs: update 0.4 -> 0.5
        gpgme: upgrade 1.20.0 -> 1.22.0
        libgudev: upgrade 237 -> 238
        gnupg: upgrade 2.4.2 -> 2.4.3
        gnutls: update 3.8.0 -> 3.8.1
        runqemu: check permissions of available render nodes as well as their presence
        build-sysroots: target or native sysroot population need to be selected explicitly

  Alexis Lothoré (7):
        oeqa/utils/gitarchive: fix tag computation when creating archive
        oeqa/selftest: introduce gitarchive tests
        oeqa/utils/gitarchive: fix tag computation when creating archive
        oeqa/selftest/gitarchive: add tests about tags lisiting when no remote is configured
        oeqa/utils/gitarchive: allow to pass a logger to get_tags
        oeqa/utils/gitarchive: fall back to local tags when listing existing tags
        oeqa/utils/gitarchive: replace warning with info when reading local tags

  Angelo Ribeiro (1):
        ccache.bbclass: Add allowed list for native recipes

  Anuj Mittal (3):
        gstreamer1.0: upgrade 1.22.4 -> 1.22.5
        harfbuzz: upgrade 8.0.1 -> 8.1.1
        stress-ng: upgrade 0.15.08 -> 0.16.04

  Archana Polampalli (1):
        vim: upgrade 9.0.1592 -> 9.0.1664

  Benjamin Bara (6):
        rust-target-config: fix target_features for vfpv3d16
        README: fix mail address in git example command
        pixman: avoid neon on unsupported machines
        nettle: avoid neon on unsupported machines
        ffmpeg: avoid neon on unsupported machines
        ghostscript: avoid neon on unsupported machines

  Bruce Ashfield (19):
        conf/machine: set preferred kernel to be 6.4
        poky/poky-tiny: set preferred linux-yocto version to 6.4
        linux-yocto/6.1: update to v6.1.44
        linux-yocto/6.4: update to v6.4.10
        linux-yocto/6.1: update to v6.1.45
        kern-tools: include utility to post process config diffs
        linux-yocto/6.1: fix uninitialized read in nohz_full/isolcpus setup
        linux-yocto/6.4: fix uninitialized read in nohz_full/isolcpus setup
        linux-yocto/6.4: update to v6.4.11
        linux-yocto/6.1: update to v6.1.46
        linux-yocto/6.1: fix IRQ-80 warnings
        linux-yocto/6.4: fix IRQ-80 warnings
        linux-yocto/6.4: fix CONFIG_F2FS_IO_TRACE configuration warning
        linux-yocto/6.1: fix CONFIG_F2FS_IO_TRACE configuration warning
        linux-yocto/6.4: update to v6.4.12
        linux-yocto/6.1: update to v6.1.50
        linux-yocto/6.4: update to v6.4.13
        linux-yocto/6.4: update to v6.4.14
        linux-yocto/6.1: update to v6.1.51

  Changqing Li (1):
        sqlite3: set CVE_STATUS for CVE-2023-36191

  Chen Qi (6):
        bitbake: runqueue.py: fix PSI check logic
        cmake: drop OE specific environment variable support
        cmake.bbclass: fix allarch override syntax
        uninative.bbclass: sync to use UNINATIVE_STAGING_DIR
        stress-ng: disable DEBUG_BUILD
        oe-depends-dot: improve '-w' behavior

  Daniel Semkowicz (1):
        dev-manual: wic.rst: Update native tools build command

  David Reyna (3):
        bitbake: toaster: Update to Django 4.2
        bitbake: toaster: import only used layers
        bitbake: toaster: accommodate missing 'Image Name' value in buildinfohelper

  Dmitry Baryshkov (4):
        mdadm: disable strace on rv32 arch
        linux-firmware: upgrade 20230625 -> 20230804
        linux-firmware: package audio topology for Lenovo X13s
        linux-firmware: package Dragonboard 845c sensors DSP firmware

  Eilís 'pidge' Ní Fhlannagáin (1):
        nativesdk-intercept: Fix bad intercept chgrp/chown logic

  Emil Ekmečić (2):
        bitbake: fetch2: add Google Cloud Platform (GCP) fetcher
        Add GCP fetcher to list of supported protocols

  Emil Kronborg Andersen (2):
        dbus: add additional entries to CVE_PRODUCT
        libxkbcommon: add CVE_PRODUCT

  Etienne Cordonnier (2):
        vim: update obsolete comment
        migration-guides: system-conf -> systemd-conf

  Frederic Martinsons (5):
        rust: add cargo-c native recipe
        classes-recipe: add cargo_c.bbclass
        rust: provide examples for C library generation in rust
        oeqa/runtime/rust: correct rust test
        ref-manual: classes.rst: suppress rust-hello-world reference, add ptest-cargo class

  Jaeyoon Jung (1):
        cml1: Fix KCONFIG_CONFIG_COMMAND not conveyed fully in do_menuconfig

  Jasper Orschulko (1):
        cve_check: Fix cpe_id generation

  Joe Slater (1):
        file: fix call to localtime_r()

  Jon Mason (1):
        linux-yocto-dev: correct qemuarmv5 device tree location

  Jose Quaresma (3):
        systemd: fix efi dependency
        systemd-boot: remove old gummiboot TUNE_CCARGS
        pybootchartgui: also match do_compile and do_configure subtasks

  Joshua Watt (9):
        bitbake: bblayers/query: Add multiconfig support to `show-appends`
        bitbake: cooker: Fix error message
        bitbake: lib/bb: Add xattr and acl libraries
        buildtools-tarball: Add libacl
        classes/image_types: Add vfat image type
        bitbake: fetch2: git: Check if clone directory is a git repo
        wic: Add gpt-hybrid partition layout
        bitbake: fetch2: git: Remove useless try..else clause
        Add libacl to required packages

  Julien Stephan (4):
        less: upgrade 633 -> 643
        less: add ptest support
        patch.py: use --absolute-git-dir instead of --show-toplevel to retrieve gitdir
        vulkan-samples: convert debugfix.patch to git format patch

  Kai Kang (1):
        webkitgtk: fix build failure with DEBUG_BUILD enabled

  Khem Raj (22):
        gnu-efi: Fix build on musl
        systemd-boot: Fix build on musl
        glibc: Upgrade to 2.38 release
        glibc: Enable fortify sources by defaults
        glibc: Drop --enable-tunables
        glibc: Fix SVE detection on aarch64
        glibc-tests: Add missing libgcc runtime dependency
        kernel.bbclass: Use KERNEL_STRIP instead of STRIP
        build-sysroots: Add SUMMARY field
        tunes: Add support for sve instructions on armv8/armv9
        arch-armv8,arch-armv9: Add sve based tune options
        python3: Increase default thread stack size on musl
        inetutils: Fix CVE-2023-40303
        inetutils: Apply devtool formatting suggestions
        qemu: Fix CVE-2023-40360
        core-image-ptest: Define a fallback for SUMMARY field
        dos2unix: upgrade 7.5.0 -> 7.5.1
        python3: Fix ptests on musl
        tcl: Add a way to skip ptests
        rust-target-config: Map rust target to OE target
        libc-test: Depend on musl-staticdev
        apr: Fix ptests on musl

  Lee Chee Yang (2):
        migration-guides: add release notes for 4.2.3
        migration-guides: add release notes for 4.0.12

  Lei Maohui (1):
        glibc-package: Fix conflict error when enable multilib.

  Luan Rafael Carneiro (2):
        weston: Upgrade version 12.0.1 -> 12.0.2
        weston: Add sysconfdir to FILES:${PN}

  Luca Ceresoli (1):
        Revert "oeqa/runtime/parselogs: Exclude preempt-rt error for now"

  Markus Niebel (2):
        wic: fix wrong attempt to create file system in upartitioned regions
        oeqa: wic: Add test for --no-table option

  Markus Volk (8):
        gtk4: upgrade 4.10.4 -> 4.10.5
        libadwaita: upgrade 1.3.3 -> 1.3.4
        gtk4: upgrade 4.10.5 -> 4.12.0
        qemu: fix libudev packageconfig for systemd images
        qemu: build pulseaudio support depending on distro_feature
        qemu: add packageconfigs for fuse and dbus-display
        gtk4: upgrade 4.12.0 -> 4.12.1
        mesa: add intel raytracing support to opencl build

  Martin Jansa (6):
        tcl: prevent installing another copy of tzdata
        cross-localedef-native: fix build on hosts with older glibc
        bitbake: runqueue: show more pressure data
        Makefile: remove from top-level directory
        bitbake: runqueue: show number of currently running bitbake threads when pressure changes
        webkitgtk: explicitly disable JIT for armv7* with softfp

  Michael Halstead (2):
        yocto-uninative: Update to 4.2 for glibc 2.38
        yocto-uninative: Update to 4.3

  Michael Opdenacker (26):
        scripts/create-pull-request: update URLs to git repositories
        manuals: create a dedicated "Contributor Guide" document
        ref-manual: classes.rst: fix location of _ref-classes-ccache
        ref-manual: update supported distro versions
        contributor-guide: add missing links to mailing lists
        contributor-guide: add section about why we use mailing lists
        contributor-guide: add recipe style guide
        ref-manual: remove AUTHOR variable
        contributor guide: call section "Reporting a defect"
        contributor-guide: remove obsolete pkg-config guidelines
        contributor guide: remove unnecessary information about mailing lists
        contributor-guide: clarification about patchtest
        contributor guide: update instructions for making and sharing changes
        dev-manual: disk-space: mention faster "find" command to trim sstate cache
        contributor-guide: move to 2nd place in top menu
        contributor-guide: submit-changes: simplify note
        contributor-guide: identify component: provide link to repositories
        contributor-guide: submit-changes: detail commit and patch creation
        contributor-guide: submit-changes: develop sending patches section
        manuals: README: update list of manuals
        contributor-guide: submit-changes: reorganize and develop sections
        contributor-guide: submit-changes: improvements to mailing lists section
        contributor-guide: submit-changes: commit guidelines for recipes
        contributor-guide: submit-changes: how to request push access to repositories
        README: update/fix contribution guidelines
        bitbake: doc: bitbake-user-manual: remove reference to SSTATE_MIRRORS variable

  Mikko Rapeli (4):
        openssh: capture ptest regression test failure logs
        oeqa selftest context.py: whitespace fix
        oeqa selftest context.py: remove warning from missing meta-selftest
        oeqa selftest context.py: fix git commands and set branch name

  Mingli Yu (2):
        qemu: Add qemu-common package
        webkitgtk: Add opengl to REQUIRED_DISTRO_FEATURES

  Narpat Mali (1):
        ffmpeg: add CVE_STATUS for CVE-2023-39018

  Otavio Salvador (2):
        weston-init: remove misleading comment about udev rule
        weston-init: fix init code indentation

  Ovidiu Panait (1):
        mdadm: skip running 04update-uuid and 07revert-inplace testcases

  Paulo Neves (1):
        bitbake: siggen.py: Improve taskhash reproducibility

  Peter Kjellerstedt (3):
        bin_package.bbclass: Inhibit the default dependencies
        insane.bbclass: Remove an unused variable
        poky.conf: Switch to post release name/version

  Peter Marko (2):
        openssl: Upgrade 3.1.1 -> 3.1.2
        gcc-runtime: remove bashism

  Poonam Jadhav (1):
        pixman: Remove duplication of license MIT

  Randolph Sapp (1):
        bitbake: gitsm: tolerate git-lfs in submodules

  Richard Purdie (39):
        bitbake: siggen: Fix indentation
        bitbake: siggen: Update debug
        resulttool/report: Avoid divide by zero
        gcc-testsuite: Fix qemu binary filtering code logic error
        gcc-testsuite: Set qemu options for mips correctly
        mips/tune-mips64r2: Set qemu cpu option correctly
        binutils-cross-testsuite: Pass TUNE_LDARGS to tests
        arch-mips: Ensure TUNE_LDARGS is set correctly
        gcc: Add patch to improve testsuite failures, particularly mips
        oeqa/runtime/parselogs: Exclude preempt-rt error for now
        qemu: Upgrade 8.0.3 -> 8.0.4
        lib/package_manager: Improve repo artefact filtering
        Revert "oeqa/utils/gitarchive: fix tag computation when creating archive"
        lttng-modules: Upgrade 2.13.9 -> 2.13.10
        lttng-tools: Upgrade 2.13.9 -> 2.13.10
        pseudo: Fix to work with glibc 2.38
        binutils: Add missing DEPENDS on pod2man
        build-sysroots: Ensure dependency chains are minimal
        bitbake: fetch2: Add new srcrev fetcher API
        base/package: Move source revision information from PV to PKGV
        recipes/classes/scripts: Drop SRCPV usage in OE-Core
        glibc: Add glibc 2.38 stable updates
        README: Update to point to new contributor guide
        bitbake: README: Update to point to new contributor guide
        bitbake: command: Avoid time intensive distractions for ping
        README: Clarify/standardise contributions process
        python3-numpy: Attempt to fix reproducibility issue
        bitbake: doc: Document challenges of tags with git fetcher
        bitbake: server/process: Add more timing debug
        qemu: Upgrade 8.0.4 -> 8.1.0
        qemu: Add patches to resolve x86 and then mips boot issues
        mdadm: Disable further tests due to intermittent failures
        Revert "oeqa selftest context.py: fix git commands and set branch name"
        classes: Drop ';' delimiter from ROOTFS/IMAGE*COMMAND variables
        build-appliance-image: Update to master head revision
        layer.conf: Update to nanbield release series
        bitbake: bitbake: Update to 2.6.0 release series/version
        layer.conf: Update to nanbield release series
        build-appliance-image: Update to master head revision

  Ross Burton (47):
        connman-conf: don't take over any ethernet devices, not just eth0
        meson.bbclass: add MESON_TARGET
        meson.bbclass:: update do_write_config vardeps
        systemd-boot: use MESON_TARGET
        systemd-boot: improve cross file generation
        p11-kit: fix build without qemu-usermode
        gi-docgen: depend on qemu-usermode MACHINE_FEATURES
        python3-pygobject: add explicit check for qemu-usermode MACHINE_FEATURE
        graphene: fix runtime detection of IEEE754 behaviour
        python3: ignore disputed CVE-2023-36632
        procps: backport fix for CVE-2023-4016
        linux/generate-cve-exclusions.py: fix comparison
        linux/cve-exclusions: update CVE_STATUS exclusions
        perf: enable verbose feature detection
        perf: add more PACKAGECONFIGs
        perf: fix perl binding support
        perf: split scripting PACKAGECONFIG into perl and python
        perf: disable perl support
        libtraceevent: build with Meson
        linux/generate-cve-exclusions: add version check warning
        linux-yocto: update CVE exclusions files
        site: remove at-spi2-core values
        inetutils: don't guess target paths
        inetutils: remove obsolete patches
        inetutils: remove obsolete cruft from do_configure
        glib-networking: enable build with GnuTLS if PKCS#11 was disabled
        glib-networking: use gnutls backend for TLS sockets
        cve-extra-exclusions: remove historic kernel CVEs which are handled now
        cve-extra-exclusions: remove BlueZ issues
        linux-yocto: update kernel CVE status
        linux: review some historic CVE_STATUS
        glib-2.0: explicitly enable strlcpy()
        scripts/oe-find-native-sysroot: use bitbake-getvar
        qemu-system-native: enable PNG support
        python3-build: upgrade to 1.0.0
        glib-2.0: libelf has a configure option now, specify it
        harfbuzz: update PACKAGECONFIG
        pango: explictly enable/disable libthai
        libsoup-2.4: update PACKAGECONFIG
        libsoup: update PACKAGECONFIG
        wayland-utils: add libdrm PACKAGECONFIG
        cve-exclusion: review the last of the historical kernel CVEs
        busybox: remove coreutils dependency in busybox-ptest
        libgudev: explicitly disable tests and vapi
        linux: update CVE exclusions
        python3-build: upgrade to 1.0.3
        avahi: handle invalid service types gracefully

  Ryan Eatmon (1):
        kernel.bbclass: Add force flag to rm calls

  Samantha Jalabert (1):
        bitbake: Fix disk space monitoring on cephfs

  Stéphane Veyret (1):
        nfs-utils: Add needed library to client

  Sudip Mukherjee (4):
        kea: upgrade to v2.4.0
        cmake: upgrade to v3.27.4
        dpkg: upgrade to v1.22.0
        openssh: upgrade to v9.4p1

  Tom Hochstein (1):
        linux-firmware: add firmware files for NXP BT chipsets

  Trevor Gamblin (16):
        python3-hypothesis: upgrade 6.82.0 -> 6.82.5
        python3-more-itertools: upgrade 10.0.0 -> 10.1.0
        python3-pygments: upgrade 2.15.1 -> 2.16.1
        python3-wheel: upgrade 0.41.0 -> 0.41.1
        maintainers.inc: Add self for unmaintained Python recipes
        oe-buildenv-internal: update required Python version
        python3-dbusmock: upgrade 0.29.0 -> 0.29.1
        python3-numpy: upgrade 1.25.1 -> 1.25.2
        python3-trove-classfiers: upgrade 2023.7.6 -> 2023.8.7
        python3-setuptools: upgrade 68.0.0 -> 68.1.0
        python3-dtc: upgrade 1.6.1 -> 1.7.0
        python3-poetry: upgrade 1.6.1 -> 1.7.0
        python3-git: upgrade 3.1.32 -> 3.1.34
        python3-hypothesis: upgrade 6.82.7 -> 6.84.0
        python3-pytest: upgrade 7.4.0 -> 7.4.1
        python3-sphinx: upgrade 7.1.1 -> 7.2.5

  Ulrich Ölmann (1):
        weston: fix comment

  Wang Mingyu (47):
        btrfs-tools: upgrade 6.3.1 -> 6.3.3
        curl: upgrade 8.2.0 -> 8.2.1
        file: upgrade 5.44 -> 5.45
        gmp: upgrade 6.2.1 -> 6.3.0
        xxhash: upgrade 0.8.1 -> 0.8.2
        python3-editables: upgrade 0.4 -> 0.5
        python3-markdown: upgrade 3.4.3 -> 3.4.4
        python3-pathspec: upgrade 0.11.1 -> 0.11.2
        python3-pip: upgrade 23.2 -> 23.2.1
        python3-pyparsing: upgrade 3.1.0 -> 3.1.1
        re2c: upgrade 3.0 -> 3.1
        shaderc: upgrade 2023.4 -> 2023.5
        sudo: upgrade 1.9.14p2 -> 1.9.14p3
        libarchive: upgrade 3.6.2 -> 3.7.1
        tar: upgrade 1.34 -> 1.35
        bind: upgrade 9.18.17 -> 9.18.18
        bluez5: upgrade 5.68 -> 5.69
        ell: upgrade 0.57 -> 0.58
        git: upgrade 2.41.0 -> 2.42.0
        kbd: upgrade 2.6.1 -> 2.6.2
        libconvert-asn1-perl: upgrade 0.33 -> 0.34
        libdrm: upgrade 2.4.115 -> 2.4.116
        libedit: upgrade 20221030-3.1 -> 20230828-3.1
        libgit2: upgrade 1.7.0 -> 1.7.1
        librepo: upgrade 1.15.1 -> 1.15.2
        libsecret: upgrade 0.20.5 -> 0.21.0
        libsndfile1: upgrade 1.2.0 -> 1.2.2
        libxml2: upgrade 2.11.4 -> 2.11.5
        mc: upgrade 4.8.29 -> 4.8.30
        mpfr: upgrade 4.2.0 -> 4.2.1
        neard: upgrade 0.18 -> 0.19
        python3: upgrade 3.11.4 -> 3.11.5
        pango: upgrade 1.50.14 -> 1.51.0
        pigz: upgrade 2.7 -> 2.8
        pkgconf: upgrade 1.9.5 -> 2.0.2
        python3-setuptools: upgrade 68.1.0 -> 68.1.2
        repo: upgrade 2.35 -> 2.36.1
        shaderc: upgrade 2023.5 -> 2023.6
        sqlite3: upgrade 3.42.0 -> 3.43.0
        sysklogd: upgrade 2.5.0 -> 2.5.2
        xz: upgrade 5.4.3 -> 5.4.4
        zlib: upgrade 1.2.13 -> 1.3
        python3-hypothesis: upgrade 6.82.5 -> 6.82.7
        python3-pluggy: upgrade 1.2.0 -> 1.3.0
        python3-sphinx-rtd-theme: upgrade 1.2.2 -> 1.3.0
        python3-wheel: upgrade 0.41.1 -> 0.41.2
        librepo: upgrade 1.15.2 -> 1.16.0

  Yang Xu (1):
        meson: don't fail if no .pyc exists

  Yi Zhao (2):
        dhcpcd: upgrade 10.0.1 -> 10.0.2
        dhcpcd: fix buffer overflow

  Yoann Congal (1):
        dev-manual: remove unsupported :term: markup inside markup

  Yogita Urade (1):
        dropbear: fix CVE-2023-36328

  Yuta Hayama (3):
        linux/generate-cve-exclusions: print the generated time in UTC
        linux/generate-cve-exclusions: fix mishandling of boundary values
        linux-yocto: correct the wording in CVE_STATUS

  Zang Ruochen (6):
        tcf-agent: Disable non-building features on loongarch64
        gcc-sanitizers: Add loongarch as a compatible architecture.
        goarch.bbclass: Add loongarch64 to go_map_arch
        qemuloongarch.inc:Change to use virtio-serial-pci
        kernel-devsrc: Fixed missing loongarch64 kernel source code when test_kernelmodules
        gcc: Fresh 0003-64-bit-multilib-hack.patch to add loongarch64 support

Change-Id: I4d4752539711b34471002dd1817bb7c14a590675
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
diff --git a/poky/scripts/create-pull-request b/poky/scripts/create-pull-request
index 2f91a35..885105f 100755
--- a/poky/scripts/create-pull-request
+++ b/poky/scripts/create-pull-request
@@ -149,13 +149,10 @@
 WEB_URL=""
 case "$REMOTE_URL" in
 	*git.yoctoproject.org*)
-		WEB_URL="http://git.yoctoproject.org/cgit.cgi/$REMOTE_REPO/log/?h=$BRANCH"
-		;;
-	*git.pokylinux.org*)
-		WEB_URL="http://git.pokylinux.org/cgit.cgi/$REMOTE_REPO/log/?h=$BRANCH"
+		WEB_URL="https://git.yoctoproject.org/$REMOTE_REPO/log/?h=$BRANCH"
 		;;
 	*git.openembedded.org*)
-		WEB_URL="http://cgit.openembedded.org/$REMOTE_REPO/log/?h=$BRANCH"
+		WEB_URL="https://git.openembedded.org/$REMOTE_REPO/log/?h=$BRANCH"
 		;;
 	*github.com*)
 		WEB_URL="https://github.com/$REMOTE_REPO/tree/$BRANCH"
diff --git a/poky/scripts/lib/devtool/sdk.py b/poky/scripts/lib/devtool/sdk.py
index d717b6c..9aefd7e 100644
--- a/poky/scripts/lib/devtool/sdk.py
+++ b/poky/scripts/lib/devtool/sdk.py
@@ -300,7 +300,8 @@
             return 2
 
         try:
-            exec_build_env_command(config.init_path, basepath, 'bitbake build-sysroots', watch=True)
+            exec_build_env_command(config.init_path, basepath, 'bitbake build-sysroots -c build_native_sysroot', watch=True)
+            exec_build_env_command(config.init_path, basepath, 'bitbake build-sysroots -c build_target_sysroot', watch=True)
         except bb.process.ExecutionError as e:
             raise DevtoolError('Failed to bitbake build-sysroots:\n%s' % (str(e)))
 
diff --git a/poky/scripts/lib/recipetool/create.py b/poky/scripts/lib/recipetool/create.py
index e99e071..f9dda3c 100644
--- a/poky/scripts/lib/recipetool/create.py
+++ b/poky/scripts/lib/recipetool/create.py
@@ -690,7 +690,7 @@
             srcpvprefix = 'svnr'
         else:
             srcpvprefix = scheme
-        lines_before.append('PV = "%s+%s${SRCPV}"' % (realpv or '1.0', srcpvprefix))
+        lines_before.append('PV = "%s+%s"' % (realpv or '1.0', srcpvprefix))
         pv_srcpv = True
         if not args.autorev and srcrev == '${AUTOREV}':
             if os.path.exists(os.path.join(srctree, '.git')):
diff --git a/poky/scripts/lib/resulttool/report.py b/poky/scripts/lib/resulttool/report.py
index f0ca50e..a349510 100644
--- a/poky/scripts/lib/resulttool/report.py
+++ b/poky/scripts/lib/resulttool/report.py
@@ -176,7 +176,10 @@
             vals['sort'] = line['testseries'] + "_" + line['result_id']
             vals['failed_testcases'] = line['failed_testcases']
             for k in cols:
-                vals[k] = "%d (%s%%)" % (line[k], format(line[k] / total_tested * 100, '.0f'))
+                if total_tested:
+                    vals[k] = "%d (%s%%)" % (line[k], format(line[k] / total_tested * 100, '.0f'))
+                else:
+                    vals[k] = "0 (0%)"
             for k in maxlen:
                 if k in vals and len(vals[k]) > maxlen[k]:
                     maxlen[k] = len(vals[k])
diff --git a/poky/scripts/lib/scriptutils.py b/poky/scripts/lib/scriptutils.py
index f433106..f23e53c 100644
--- a/poky/scripts/lib/scriptutils.py
+++ b/poky/scripts/lib/scriptutils.py
@@ -177,7 +177,7 @@
                 f.write('BB_STRICT_CHECKSUM = "ignore"\n')
                 f.write('SRC_URI = "%s"\n' % srcuri)
                 f.write('SRCREV = "%s"\n' % srcrev)
-                f.write('PV = "0.0+${SRCPV}"\n')
+                f.write('PV = "0.0+"\n')
                 f.write('WORKDIR = "%s"\n' % tmpworkdir)
                 # Set S out of the way so it doesn't get created under the workdir
                 f.write('S = "%s"\n' % os.path.join(tmpdir, 'emptysrc'))
diff --git a/poky/scripts/lib/wic/ksparser.py b/poky/scripts/lib/wic/ksparser.py
index 667b2ff..7ef3dc8 100644
--- a/poky/scripts/lib/wic/ksparser.py
+++ b/poky/scripts/lib/wic/ksparser.py
@@ -188,11 +188,12 @@
         part.add_argument('--uuid')
         part.add_argument('--fsuuid')
         part.add_argument('--no-fstab-update', action='store_true')
+        part.add_argument('--mbr', action='store_true')
 
         bootloader = subparsers.add_parser('bootloader')
         bootloader.add_argument('--append')
         bootloader.add_argument('--configfile')
-        bootloader.add_argument('--ptable', choices=('msdos', 'gpt'),
+        bootloader.add_argument('--ptable', choices=('msdos', 'gpt', 'gpt-hybrid'),
                                 default='msdos')
         bootloader.add_argument('--timeout', type=int)
         bootloader.add_argument('--source')
diff --git a/poky/scripts/lib/wic/partition.py b/poky/scripts/lib/wic/partition.py
index bda4aef..b1a2306 100644
--- a/poky/scripts/lib/wic/partition.py
+++ b/poky/scripts/lib/wic/partition.py
@@ -60,6 +60,7 @@
         self.has_fstab = False
         self.update_fstab_in_rootfs = False
         self.hidden = args.hidden
+        self.mbr = args.mbr
 
         self.lineno = lineno
         self.source_file = ""
@@ -134,7 +135,7 @@
             self.update_fstab_in_rootfs = True
 
         if not self.source:
-            if self.fstype == "none":
+            if self.fstype == "none" or self.no_table:
                 return
             if not self.size and not self.fixed_size:
                 raise WicError("The %s partition has a size of zero. Please "
diff --git a/poky/scripts/lib/wic/plugins/imager/direct.py b/poky/scripts/lib/wic/plugins/imager/direct.py
index 55347f5..9b619e4 100644
--- a/poky/scripts/lib/wic/plugins/imager/direct.py
+++ b/poky/scripts/lib/wic/plugins/imager/direct.py
@@ -342,7 +342,7 @@
         # generate parition and filesystem UUIDs
         for part in self.partitions:
             if not part.uuid and part.use_uuid:
-                if self.ptable_format == 'gpt':
+                if self.ptable_format in ('gpt', 'gpt-hybrid'):
                     part.uuid = str(uuid.uuid4())
                 else: # msdos partition table
                     part.uuid = '%08x-%02d' % (self.identifier, part.realnum)
@@ -398,6 +398,10 @@
                 raise WicError("setting custom partition type is not " \
                                "implemented for msdos partitions")
 
+            if part.mbr and self.ptable_format != 'gpt-hybrid':
+                raise WicError("Partition may only be included in MBR with " \
+                               "a gpt-hybrid partition table")
+
             # Get the disk where the partition is located
             self.numpart += 1
             if not part.no_table:
@@ -406,7 +410,7 @@
             if self.numpart == 1:
                 if self.ptable_format == "msdos":
                     overhead = MBR_OVERHEAD
-                elif self.ptable_format == "gpt":
+                elif self.ptable_format in ("gpt", "gpt-hybrid"):
                     overhead = GPT_OVERHEAD
 
                 # Skip one sector required for the partitioning scheme overhead
@@ -490,7 +494,7 @@
         # Once all the partitions have been layed out, we can calculate the
         # minumim disk size
         self.min_size = self.offset
-        if self.ptable_format == "gpt":
+        if self.ptable_format in ("gpt", "gpt-hybrid"):
             self.min_size += GPT_OVERHEAD
 
         self.min_size *= self.sector_size
@@ -511,22 +515,38 @@
 
         return exec_native_cmd(cmd, self.native_sysroot)
 
-    def create(self):
-        logger.debug("Creating sparse file %s", self.path)
-        with open(self.path, 'w') as sparse:
-            os.ftruncate(sparse.fileno(), self.min_size)
-
-        logger.debug("Initializing partition table for %s", self.path)
-        exec_native_cmd("parted -s %s mklabel %s" %
-                        (self.path, self.ptable_format), self.native_sysroot)
-
-        logger.debug("Set disk identifier %x", self.identifier)
-        with open(self.path, 'r+b') as img:
+    def _write_identifier(self, device, identifier):
+        logger.debug("Set disk identifier %x", identifier)
+        with open(device, 'r+b') as img:
             img.seek(0x1B8)
-            img.write(self.identifier.to_bytes(4, 'little'))
+            img.write(identifier.to_bytes(4, 'little'))
+
+    def _make_disk(self, device, ptable_format, min_size):
+        logger.debug("Creating sparse file %s", device)
+        with open(device, 'w') as sparse:
+            os.ftruncate(sparse.fileno(), min_size)
+
+        logger.debug("Initializing partition table for %s", device)
+        exec_native_cmd("parted -s %s mklabel %s" % (device, ptable_format),
+                        self.native_sysroot)
+
+
+    def create(self):
+        self._make_disk(self.path,
+                        "gpt" if self.ptable_format == "gpt-hybrid" else self.ptable_format,
+                        self.min_size)
+
+        self._write_identifier(self.path, self.identifier)
+
+        if self.ptable_format == "gpt-hybrid":
+            mbr_path = self.path + ".mbr"
+            self._make_disk(mbr_path, "msdos", self.min_size)
+            self._write_identifier(mbr_path, self.identifier)
 
         logger.debug("Creating partitions")
 
+        hybrid_mbr_part_num = 0
+
         for part in self.partitions:
             if part.num == 0:
                 continue
@@ -571,7 +591,14 @@
             self._create_partition(self.path, part.type,
                                    parted_fs_type, part.start, part.size_sec)
 
-            if self.ptable_format == "gpt" and (part.part_name or part.label):
+            if self.ptable_format == "gpt-hybrid" and part.mbr:
+                hybrid_mbr_part_num += 1
+                if hybrid_mbr_part_num > 4:
+                    raise WicError("Extended MBR partitions are not supported in hybrid MBR")
+                self._create_partition(mbr_path, "primary",
+                                       parted_fs_type, part.start, part.size_sec)
+
+            if self.ptable_format in ("gpt", "gpt-hybrid") and (part.part_name or part.label):
                 partition_label = part.part_name if part.part_name else part.label
                 logger.debug("partition %d: set name to %s",
                              part.num, partition_label)
@@ -586,7 +613,7 @@
                                          (part.num, part.part_type,
                                           self.path), self.native_sysroot)
 
-            if part.uuid and self.ptable_format == "gpt":
+            if part.uuid and self.ptable_format in ("gpt", "gpt-hybrid"):
                 logger.debug("partition %d: set UUID to %s",
                              part.num, part.uuid)
                 exec_native_cmd("sgdisk --partition-guid=%d:%s %s" % \
@@ -594,12 +621,16 @@
                                 self.native_sysroot)
 
             if part.active:
-                flag_name = "legacy_boot" if self.ptable_format == 'gpt' else "boot"
+                flag_name = "legacy_boot" if self.ptable_format in ('gpt', 'gpt-hybrid') else "boot"
                 logger.debug("Set '%s' flag for partition '%s' on disk '%s'",
                              flag_name, part.num, self.path)
                 exec_native_cmd("parted -s %s set %d %s on" % \
                                 (self.path, part.num, flag_name),
                                 self.native_sysroot)
+                if self.ptable_format == 'gpt-hybrid' and part.mbr:
+                    exec_native_cmd("parted -s %s set %d %s on" % \
+                                    (mbr_path, hybrid_mbr_part_num, "boot"),
+                                    self.native_sysroot)
             if part.system_id:
                 exec_native_cmd("sfdisk --part-type %s %s %s" % \
                                 (self.path, part.num, part.system_id),
@@ -612,6 +643,25 @@
                                 (self.path, part.num),
                                 self.native_sysroot)
 
+        if self.ptable_format == "gpt-hybrid":
+            # Write a protective GPT partition
+            hybrid_mbr_part_num += 1
+            if hybrid_mbr_part_num > 4:
+                raise WicError("Extended MBR partitions are not supported in hybrid MBR")
+
+            # parted cannot directly create a protective GPT partition, so
+            # create with an arbitrary type, then change it to the correct type
+            # with sfdisk
+            self._create_partition(mbr_path, "primary", "fat32", 1, GPT_OVERHEAD)
+            exec_native_cmd("sfdisk --part-type %s %d 0xee" % (mbr_path, hybrid_mbr_part_num),
+                            self.native_sysroot)
+
+            # Copy hybrid MBR
+            with open(mbr_path, "rb") as mbr_file:
+                with open(self.path, "r+b") as image_file:
+                    mbr = mbr_file.read(512)
+                    image_file.write(mbr)
+
     def cleanup(self):
         pass
 
diff --git a/poky/scripts/nativesdk-intercept/chgrp b/poky/scripts/nativesdk-intercept/chgrp
index 30cc417..f8ae84b 100755
--- a/poky/scripts/nativesdk-intercept/chgrp
+++ b/poky/scripts/nativesdk-intercept/chgrp
@@ -14,7 +14,10 @@
 args = list()
 
 found = False
-for i in sys.argv:
+
+args.append(real_chgrp)
+
+for i in sys.argv[1:]:
     if i.startswith("-"):
         args.append(i)
         continue
diff --git a/poky/scripts/nativesdk-intercept/chown b/poky/scripts/nativesdk-intercept/chown
index 3914b3e..0805ceb 100755
--- a/poky/scripts/nativesdk-intercept/chown
+++ b/poky/scripts/nativesdk-intercept/chown
@@ -14,7 +14,10 @@
 args = list()
 
 found = False
-for i in sys.argv:
+
+args.append(real_chown)
+
+for i in sys.argv[1:]:
     if i.startswith("-"):
         args.append(i)
         continue
diff --git a/poky/scripts/oe-buildenv-internal b/poky/scripts/oe-buildenv-internal
index f856e61..2fdb195 100755
--- a/poky/scripts/oe-buildenv-internal
+++ b/poky/scripts/oe-buildenv-internal
@@ -32,12 +32,12 @@
 # We potentially have code that doesn't parse correctly with older versions 
 # of Python, and rather than fixing that and being eternally vigilant for 
 # any other new feature use, just check the version here.
-py_v35_check=$(python3 -c 'import sys; print(sys.version_info >= (3,5,0))')
-if [ "$py_v35_check" != "True" ]; then
-    echo >&2 "BitBake requires Python 3.5.0 or later as 'python3 (scripts/install-buildtools can be used if needed)'"
+py_v38_check=$(python3 -c 'import sys; print(sys.version_info >= (3,8,0))')
+if [ "$py_v38_check" != "True" ]; then
+    echo >&2 "BitBake requires Python 3.8.0 or later as 'python3' (scripts/install-buildtools can be used if needed)"
     return 1
 fi
-unset py_v35_check
+unset py_v38_check
 
 if [ -z "$BDIR" ]; then
     if [ -z "$1" ]; then
diff --git a/poky/scripts/oe-depends-dot b/poky/scripts/oe-depends-dot
index 1c2d51c..d02ee45 100755
--- a/poky/scripts/oe-depends-dot
+++ b/poky/scripts/oe-depends-dot
@@ -14,7 +14,7 @@
 class Dot(object):
     def __init__(self):
         parser = argparse.ArgumentParser(
-            description="Analyse recipe-depends.dot generated by bitbake -g",
+            description="Analyse task-depends.dot generated by bitbake -g",
             formatter_class=argparse.RawDescriptionHelpFormatter)
         parser.add_argument("dotfile",
             help = "Specify the dotfile", nargs = 1, action='store', default='')
@@ -159,9 +159,14 @@
 
         reverse_deps = []
         if self.args.why:
-            for k, v in depends.items():
-                if self.args.key in v and not k in reverse_deps:
-                    reverse_deps.append(k)
+            key_list = [self.args.key]
+            current_key = self.args.key
+            while (len(key_list) != 0):
+                current_key = key_list.pop()
+                for k, v in depends.items():
+                    if current_key in v and not k in reverse_deps:
+                        reverse_deps.append(k)
+                        key_list.append(k)
             print('Because: %s' % ' '.join(reverse_deps))
             Dot.print_dep_chains(self.args.key, reverse_deps, depends)
 
diff --git a/poky/scripts/oe-find-native-sysroot b/poky/scripts/oe-find-native-sysroot
index 5146bbf..6228efc 100755
--- a/poky/scripts/oe-find-native-sysroot
+++ b/poky/scripts/oe-find-native-sysroot
@@ -36,20 +36,9 @@
 fi
 
 # Global vars
-BITBAKE_E=""
 set_oe_native_sysroot(){
-    echo "Running bitbake -e $1"
-    BITBAKE_E="`bitbake -e $1`"
-    OECORE_NATIVE_SYSROOT=`echo "$BITBAKE_E" | grep ^STAGING_DIR_NATIVE= | cut -d '"' -f2`
-
-    if [ "x$OECORE_NATIVE_SYSROOT" = "x" ]; then
-        # This indicates that there was an error running bitbake -e that
-        # the user needs to be informed of
-        echo "There was an error running bitbake to determine STAGING_DIR_NATIVE"
-        echo "Here is the output from bitbake -e $1"
-        echo $BITBAKE_E
-        exit 1
-    fi
+    echo "Getting sysroot..."
+    OECORE_NATIVE_SYSROOT=$(bitbake-getvar -r $1 --value STAGING_DIR_NATIVE)
 }
 
 if [ "x$OECORE_NATIVE_SYSROOT" = "x" ]; then
diff --git a/poky/scripts/pybootchartgui/pybootchartgui/draw.py b/poky/scripts/pybootchartgui/pybootchartgui/draw.py
index 3d1ff69..c6e6783 100644
--- a/poky/scripts/pybootchartgui/pybootchartgui/draw.py
+++ b/poky/scripts/pybootchartgui/pybootchartgui/draw.py
@@ -659,12 +659,21 @@
             x = chart_rect[0] + (start - offset) * sec_w
             w = elapsed_time * sec_w
 
+            def set_alfa(color, alfa):
+                clist = list(color)
+                clist[-1] = alfa
+                return tuple(clist)
+
             #print("proc at %s %s %s %s" % (x, y, w, proc_h))
             col = None
             if task == "do_compile":
                 col = TASK_COLOR_COMPILE
+            elif "do_compile" in task:
+                col = set_alfa(TASK_COLOR_COMPILE, 0.25)
             elif task == "do_configure":
                 col = TASK_COLOR_CONFIGURE
+            elif "do_configure" in task:
+                col = set_alfa(TASK_COLOR_CONFIGURE, 0.25)
             elif task == "do_install":
                 col = TASK_COLOR_INSTALL
             elif task == "do_populate_sysroot":
diff --git a/poky/scripts/runqemu b/poky/scripts/runqemu
index 0e105a9..3a17033 100755
--- a/poky/scripts/runqemu
+++ b/poky/scripts/runqemu
@@ -1383,8 +1383,18 @@
         render_hint = """If /dev/dri/renderD* is absent due to lack of suitable GPU, 'modprobe vgem' will create one suitable for mesa llvmpipe software renderer."""
         try:
             content = os.listdir("/dev/dri")
-            if len([i for i in content if i.startswith('render')]) == 0:
-                raise RunQemuError("No render nodes found in /dev/dri: %s. %s" %(content, render_hint))
+            nodes = [i for i in content if i.startswith('renderD')]
+            if len(nodes) == 0:
+                raise RunQemuError("No render nodes found in /dev/dri/: %s. %s" %(content, render_hint))
+            for n in nodes:
+                try:
+                    with open(os.path.join("/dev/dri", n), "w") as f:
+                        f.close()
+                        break
+                except IOError:
+                    pass
+            else:
+                raise RunQemuError("None of the render nodes in /dev/dri/ are accessible: %s; you may need to add yourself to 'render' group or otherwise ensure you have read-write permissions on one of them." %(nodes))
         except FileNotFoundError:
             raise RunQemuError("/dev/dri directory does not exist; no render nodes available on this machine. %s" %(render_hint))