subtree updates Jan-13-2023
meta-openembedded: d04444509a..cd13881611:
Alex Kiernan (10):
mdns: Upgrade 1310.140.1 -> 1790.40.31
mdns: Set MDNS_VERSIONSTR_NODTS
mdns: Upgrade 1790.40.31 -> 1790.60.25
ostree: Upgrade 2022.5 -> 2022.7
ostree: Use systemd_system_unitdir for systemd units
ostree: Switch to fuse3 which is supported in ostree now
ostree: Fix comments for configuration/ptest
ostree: Handle musl's ERANGE mapping
usbguard: Remove pegtl from DEPENDS
usbguard: Upgrade 1.1.1 -> 1.1.2
Alex Stewart (2):
gvfs: stylize DEPENDS
gvfs: obviate the ssh-client requirement for gvfs
Alexander Kanavin (5):
frr: add a patch to correctly check presence of python from pkg-config
lirc: correctly use PYTHONPATH
libportal: move to oe-core
packagegroup-meta-python: drop python3-strict-rfc3339
nftables: fix builds with latest setuptools
Alexander Stein (1):
dool: Add patch to fix rebuild
Archana Polampalli (1):
Nodejs - Upgrade to 16.18.1
Bartosz Golaszewski (3):
python3-kmod: new package
python3-watchdogdev: new package
packagegroup-meta-python: add missing packages
Bruce Ashfield (1):
zfs: update to 2.1.7
Changqing Li (5):
linuxptp: fix do_compile error
keyutils: fix ptest failed since "+++ Can't Determine Endianness"
graphviz: Do not build tcl support for native
redis: 6.2.7 -> 6.2.8
redis: 7.0.5 -> 7.0.7
Chen Pei (2):
suitesparse:fix git branch in SRC_URI
botan: upgrade 2.19.2 -> 2.19.3
Chen Qi (4):
xfce4-verve-plugin: fix do_configure faiure about missing libpcre
networkmanager: fix dhcpcd PACKAGECONFIG
networkmanager: install config files into correct place
networkmanager: fix /etc/resolv.conf handling
Christian Eggers (1):
boost-url: remove recipe
Clément Péron (3):
navigation: bump proj to 9.1.0 library
proj: add a packageconfig to build as a static library
proj: avoid leaking host path in libproj
Devendra Tewari (1):
android-tools: Use echo instead of bbnote
Dmitry Baryshkov (1):
nss: fix cross-compilation error
Erwann Roussy (3):
python3-schedutils: add recipe
python3-linux-procfs: add recipe
tuna: add recipe
Fabio Estevam (2):
remmina: Update to 1.4.28
crucible: Upgrade to 2022.12.06
Geoff Parker (1):
python3-yappi: upgrade 1.3.6 -> 1.4.0, python 3.11 compatible
Gerbrand De Laender (1):
python3-aioserial: new package
Gianfranco Costamagna (2):
vbxguestdrivers: upgrade 7.0.2 -> 7.0.4
boinc-client: Update boinc from 7.18.1 to 7.20.4
Gianluigi Spagnuolo (1):
libbpf: add native and nativesdk BBCLASSEXTEND
Hains van den Bosch (2):
python3-twisted: Add python3-asyncio to RDEPENDS
python3-twisted: Add python3-typing-extensions to RDEPENDS
He Zhe (1):
protobuf: upgrade 3.21.5 -> 3.21.10
Jose Quaresma (1):
lshw: bump to 42fef565
Kai Kang (31):
freeradius: fix multilib systemd service start failure
wxwidgets: 3.1.5 -> 3.2.1
python3-attrdict3: add recipe with version 2.0.2
python3-wxgtk4: 4.1.1 -> 4.2.0
xfce4-settings: 4.16.3 -> 4.16.5
python3-m2crypto: fix CVE-2020-25657 and buildpaths qa issue
fixup! wxwidgets: 3.1.5 -> 3.2.1
postfix: fix multilib conflict of sample-main.cf
python3-wxgtk4: replace deprecated inspect.getargspec
libxfce4ui: 4.16.1 -> 4.18.0
thunar-volman: 4.16.0 -> 4.18.0
xfce4-cpufreq-plugin: 1.2.7 -> 1.2.8
xfce4-wavelan-plugin: 0.6.2 -> 0.6.3
xfce4-cpugraph-plugin: 1.2.6 -> 1.2.7
xfce4-sensors-plugin: 1.4.3 -> 1.4.4
thunar-shares-plugin: Bump GLib minimum required to 2.26
xfce4-dev-tools: 4.16.0 -> 4.18.0
libxfce4util: 4.16.0 -> 4.18.0
exo: 4.16.4 -> 4.18.0
garcon: 4.16.1 -> 4.18.0
xfce4-panel: 4.16.3 -> 4.18.0
thunar: 4.16.9 -> 4.18.0
tumbler: 4.16.0 -> 4.18.0
xfconf: 4.16.0 -> 4.18.0
xfce4-appfinder: 4.16.1 -> 4.18.0
xfce4-settings: 4.16.5 -> 4.18.0
xfce4-power-manager: 4.16.0 -> 4.18.0
xfce4-session: 4.16.0 -> 4.18.0
xfwm4: 4.16.1 -> 4.18.0
xfdesktop: 4.16.0 -> 4.18.0
xorg-lib: set XORG_EXT for recipes
Khem Raj (91):
gnome-text-editor: Add missing libpcre build time depenedency
ettercap: Add missing dependency on libpcre
xcb-util-cursor: Update to 0.1.4
lldpd: Use github release assets for SRC_URI
aufs-util: Fix build with large file support enabled systems
volume-key: Inherit python3targetconfig
proj: Enable apps when building native variant
python3-pyproj: Export PROJ_DIR
satyr: Inherit python3targetconfig
rest: Re-add 0.8.1
gfbgraph: Use rest 0.8.1
audit: Inherit python3targetconfig
opensaf: Check for _FILE_OFFSET_BITS instead of __TIMESIZE
flite: Add missing deps on alsa-lib and chrpath
python3-pystemd: Regenerate .c sources using newer cython
libreport: Inherit python3targetconfig
uw-imap: Disable parallelism
gnome-calendar: Upgrade to 43.1
gnome-photos: Upgrade to 43.0
libgweather: Remove 40.0
waf-samba.bbclass: point PYTHON_CONFIG to target python3-config
amtk: Add missing dep on python3-pygments-native
fontforge: Inherit python3targetconfig
tepl: Add missing dep on python3-pygments-native
alsa-oss: Remove recipe
opencv: Check for commercial_ffmpeg as well to enable ffmpeg
opencv: Fix build with ffmpeg 5.1+
fwts: Upgrade to 22.11.00
minio: Disable on mips
sip: Add recipe for 6.7.5
imapfilter: Upgrade to 2.7.6
perfetto: Do not pass TUNE_CCARGS to native/host compiler
stressapptest: Upgrade to latest tip
mariadb: Upgrade to 10.11.1
surf: Depend on gcr3
fatcat: Enable 64bit off_t
stressapptest: Fix build with largefile support and musl
nspr: Upgrade to 4.35
cryptsetup: Upgrade to 2.6.0
libyui,libyui-ncurses: Upgrade to 4.2.3
inotify-tools: Fix build on musl and lfs64
sdbus-c++-libsystemd: Upgrade to 250.9 systemd release
xfsprogs: Upgrade to 6.0.0
drbd,drbd-utils: Upgrade to 9.2.1 and drbd-utils to 9.22.0
libtraceevent: Add recipe
libtracefs: Add recipe
trace-cmd: Remove use of off64_t and lseek64
xfsdump: Add -D_LARGEFILE64_SOURCE on musl
xfstests: Add -D_LARGEFILE64_SOURCE on musl
mariadb: Alias lseek64/open64/ftruncate64 on musl systems
gperftools: Define off64_t on musl
android-tools: Define lseek64 = lseek on musl
php: Add -D_LARGEFILE64_SOURCE to cflags
spice-gtk: Use libucontext for coroutines on musl
wxwidgets: Fix build with musl
wxwidgets: Fix locale on musl
wxwidgets: Set HAVE_LARGEFILE_SUPPORT
python3-wxgtk4: Do not use GetAssertStackTrace with USE_STACKWALKER disabled
f2fs-tools: Upgrade to 1.15.0
trace-cmd: Pass ldflags to compiler
parole: Define DATADIRNAME
abseil-cpp: Replace off64_t with off_t
vsftpd_3.0.5.bb: Define _LARGEFILE64_SOURCE on musl
mozjs-102: Disable mozilla stackwalk on musl
fatresize: Fix build when 64bit time_t is enabled
boinc-client: Fix build when using 64bit time_t
python3-grpcio: Define -D_LARGEFILE64_SOURCE only for musl
gnome-online-accounts: Fix build race seen on musl systems
imagemagick: Do not set ac_cv_sys_file_offset_bits
spdlog: Do not use LFS64 functions with musl
mongodb: Do not use off64_t on musl
dracut: Do not undefine _FILE_OFFSET_BITS
libcamera: Diable 64bit time_t on glibc targets
v4l-utils: Diable 64bit time_t on glibc targets
opensaf: Fix the check for __fsblkcnt64_t size
libcereal,poco: Link with -latomic on ppc32 as well
sshpass: Use SPDX identified string for GPLv2
nftables: Upgrade to 1.0.6
mycroft: Check for pulseaudio in distro features
trace-cmd: Build libs before building rest
open-vm-tools: Fix build with 64-bit time_t
libtraceevent: Move plugins into package of its own
trace-cmd: Upgrade to 3.1.5
luajit: Update to latest on v2.1 branch
concurrencykit: Update to 0.7.0
concurrencykit: Set correct PLAT value for riscv32
concurrencykit: Fix build on riscv32 and riscv64
sysbench: Enable only on architectures supporting LuaJIT
packagegroup-meta-oe: Ensure sysbench is included in limited arches
hwloc: Update to 2.9.0
fluentbit: Link with libatomic on ppc32
Lei Maohui (1):
polkit: Fix multilib builds
Leon Anavi (9):
python3-watchdog: Upgrade 2.2.0 -> 2.2.1
python3-zeroconf: Upgrade 0.39.4 -> 0.47.1
python3-croniter: Upgrade 1.3.7 -> 1.3.8
python3-coverage: Upgrade 7.0.1 -> 7.0.3
python3-prompt-toolkit: Upgrade 3.0.31 -> 3.0.36
python3-simplejson: Upgrade 3.18.0 -> 3.18.1
python3-termcolor: Upgrade 2.1.1 -> 2.2.0
python3-cantools: Upgrade 37.2.0 -> 38.0.0
python3-marshmallow: Upgrade 3.18.0 -> 3.19.0
Livin Sunny (1):
libwebsockets: add ipv6 in PACKAGECONFIG
Markus Volk (88):
blueman: add RDEPEND on python3-fcntl
hwdata: add patch to use sysroot prefix for pkgdatadir
pipewire: upgrade 0.3.59 -> 0.3.60
spirv-cross: upgrade; fix build
blueman: upgrade 2.34 -> 2.35
pipewire: upgrade 0.3.60 -> 0.3.61
iwd: upgrade 1.30 -> 2.0
libgdata: use gcr3
libgweather: update 4.0.0 -> 4.2.0
gnome-online-accounts: use gcr3
geary: build with gcr3
gnome-keyring: use gcr3
evolution-data-server: update 3.44.2 -> 3.46.1
gnome-settings-daemon: update 42.1 -> 43.0
libnma: update 1.8.38 -> 1.10.4
geocode-glib: build with libsoup-3.0
gjs: update 1.72.2 -> 1.75.1
gnome-shell: update 42.0 -> 43.1
mutter: update 42.0 -> 43.1
polkit: add recipe for v122
mozjs: update 98 -> 102
appstream-glib: update 0.7.18 -> 0.8.2
gthumb: build with libsoup-3
amtk: update 5.3.1 -> 5.6.1
gedit: update 42.2 -> 43.2
evolution-data-server: remove libgdata dependency
tepl: update 6.0.0 -> 6.2.0
perfetto: pass TUNE_CCARGS to use machine tune
gnome-photos: update dependencies
thunar-archive-plugin: update 0.4.0 -> 0.5.0
libadwaita: remove deprecated sassc-native dependency
gnome-shell: remove deprecated sassc-native dependency
spice-gtk: add missing license information
pipewire: update 0.3.61 -> 0.3.62
gdm: update 42.0 -> 43.0
gnome-session: update 42.0 -> 43-0
geoclue: update to latest commit to allow to build with libsoup-3.0
gvfs: fix polkit homedir
editorconfig: add recipe
tracker: update 3.4.1 -> 3.4.2
gvfs: fix dependencies
gnome-calculator: update 42.2 -> 43.0.1
tracker-miners: update 3.4.1 -> 3.4.2
gnome-photos: add missing runtime dependency on tracker-miners
gtksourceview5: update 5.4.2 -> 5.6.1
remmina: build with libsoup-3.0
ostree: replace libsoup-2.4 by curl
gnome-text-editor: update 42.2 -> 43.1
gtk4: remove recipe
libxmlb: allow to build native
pipewire: update 0.3.62 -> 0.3.63
gnome-shell-extensions: update SRC_URI and remove sassc-native dep
grilo: update 0.3.14 -> 0.3.15
libstemmer: move recipe to meta-oe
xdg-desktop-portal: add recipe
bubblewrap: import recipe from meta-security
gnome-software: add recipe
basu: import recipe from meta-wayland
xdg-desktop-portal-wlr: add recipe
appstream: add recipe
flatpak: add recipe
flatpak-xdg-utils: add recipe
flatpak: add runtime dependency on flatpak-xdg-utils
wireplumber: update 0.4.12 -> 0.4.13
wireplumber: build with dbus support by default
xdg-desktop-portal-gnome: add recipe
libcloudproviders: add recipe
evince: update 42.3 -> 43.1
libportal: build libportal-gtk4 and vala support
nautilus: update 42.2 -> 43.1
gnome-desktop: update 42.0 -> 43
file-roller: update 3.42.0 -> 43.0
wireplumber: dont start systemd system service by default
gnome-bluetooth: update 42.4 -> 42.5
gnome-flashback: update 3.44.0 -> 3.46.0
libwnck3: update 40.1 -> 43.0
gnome-panel: update 3.44.0 -> 3.47.1
gnome-terminal: update 3.42.2 -> 3.46.7
dconf-editor: update 3.38.3 -> 43.0
gnome-shell: add missing RDEPENDS
gnome-control-center: update 42.0 -> 43.2
gnome-shell: add runtime dependency on adwaita-icon-theme
xdg-desktop-portal-gtk: add recipe
thunar: add tumbler to RRECOMMENDS
gnome:terminal add missing inherit meson
gnome-disk-utility: update 42.0 -> 43.0
eog: add recipe
libdecor: import recipe
Martin Jansa (3):
nss: fix SRC_URI
geoclue: fix polkit files only with modem-gps PACKAGECONFIG
layer.conf: update LAYERSERIES_COMPAT for mickledore
Mathieu Dubois-Briand (2):
nss: Add missing CVE product
nss: Whitelist CVEs related to libnssdbm
Matthias Klein (1):
paho-mqtt-c: upgrade 1.3.11 -> 1.3.12
Max Krummenacher (1):
opencv: follow changed name license_flags_accepted
Mingli Yu (25):
gnome-calculator: add opengl to REQUIRED_DISTRO_FEATURES
waylandpp: add opengl to REQUIRED_DISTRO_FEATURES
libnma: add opengl to REQUIRED_DISTRO_FEATURES
network-manager-applet: add opengl to REQUIRED_DISTRO_FEATURES
gssdp: check opengl is enabled or not
gtksourceview5: add opengl to REQUIRED_DISTRO_FEATURES
gnome-font-viewer: add opengl to REQUIRED_DISTRO_FEATURES
libxfce4ui: check opengl DISTRO_FEATURES
gnome-desktop: add opengl to REQUIRED_DISTRO_FEATURES
ibus: add opengl related check
nautilus: add opengl to REQUIRED_DISTRO_FEATURES
gnome-bluetooth: add opengl to REQUIRED_DISTRO_FEATURES
evince: add opengl to REQUIRED_DISTRO_FEATURES
gnome-calendar: add opengl to REQUIRED_DISTRO_FEATURES
xf86-video-amdgpu: add opengl to REQUIRED_DISTRO_FEATURES
spice-gtk: add opengl to REQUIRED_DISTRO_FEATURES
grail: add opengl to REQUIRED_DISTRO_FEATURES
frame: add opengl to REQUIRED_DISTRO_FEATURES
geis: add opengl to REQUIRED_DISTRO_FEATURES
evolution-data-server: add opengl to REQUIRED_DISTRO_FEATURES
libgweather4: add opengl to REQUIRED_DISTRO_FEATURES
geary: add opengl to REQUIRED_DISTRO_FEATURES
file-roller: add opengl to REQUIRED_DISTRO_FEATURES
gnome-photos: add opengl to REQUIRED_DISTRO_FEATURES
xdg-desktop-portal-wlr: add opengl to REQUIRED_DISTRO_FEATURES
Naveen Saini (3):
opencl-headers: add native and nativesdk
tcsh: add native nativesdk BBCLASSEXTEND
tbb: upgrade 2021.5.0 -> 2021.7.0
Omkar Patil (1):
ntfs-3g-ntfsprogs: Upgrade 2022.5.17 to 2022.10.3
Ovidiu Panait (1):
multipath-tools: upgrade 0.8.4 -> 0.9.3
Peter Bergin (1):
sysbench: Upgrade 0.4.12 -> 1.0.20
Peter Kjellerstedt (4):
chrony: Make it possible to enable editline support again
chrony: Remove the libcap and nss PACKAGECONFIGs
Revert "lldpd: Use github release assets for SRC_URI"
lldpd: Correct the checksum for the tar ball to match 1.0.16
Preeti Sachan (1):
fluidsynth: update SRC_URI to remove non-existing 2.2.x branch
Roger Knecht (1):
python3-rapidjson: add recipe
Sakib Sajal (1):
minio: fix license information
Samuli Piippo (1):
protobuf: stage protoc binary to sysroot
Tim Orling (4):
libio-pty-perl: upgrade 1.16 -> 1.17; enable ptest
libmozilla-ca-perl: add recipe for 20221114
libio-socket-ssl-perl: upgrade 2.075 -> 2.076
libtest-warnings-perl: move to oe-core
Tomasz Żyjewski (2):
python3-binwalk: add recipe for version 2.3.3
python3-uefi-firmware: add recipe for version 1.9
Wang Mingyu (190):
byacc: upgrade 20220128 -> 20221106
libforms: upgrade 1.2.4 -> 1.2.5pre1
libnftnl: upgrade 1.2.3 -> 1.2.4
mpich: upgrade 4.0.2 -> 4.0.3
python3-u-msgpack-python: upgrade 2.7.1 -> 2.7.2
python3-aiosignal: upgrade 1.2.0 -> 1.3.1
python3-eth-hash: upgrade 0.5.0 -> 0.5.1
python3-frozenlist: upgrade 1.3.1 -> 1.3.3
python3-google-auth: upgrade 2.14.0 -> 2.14.1
python3-greenlet: upgrade 2.0.0 -> 2.0.1
python3-imageio: upgrade 2.22.3 -> 2.22.4
python3-pycocotools: upgrade 2.0.5 -> 2.0.6
babl: upgrade 0.1.96 -> 0.1.98
ctags: upgrade 5.9.20221106.0 -> 5.9.20221113.0
gegl: upgrade 0.4.38 -> 0.4.40
freerdp: upgrade 2.8.1 -> 2.9.0
glibmm-2.68: upgrade 2.72.1 -> 2.74.0
googlebenchmark: upgrade 1.7.0 -> 1.7.1
gnome-backgrounds: upgrade 42.0 -> 43
nano: upgrade 6.4 -> 7.0
networkmanager-openvpn: upgrade 1.10.0 -> 1.10.2
python3-django: upgrade 4.1 -> 4.1.3
python3-flask-migrate: upgrade 3.1.0 -> 4.0.0
python3-eth-utils: upgrade 2.0.0 -> 2.1.0
python3-eventlet: upgrade 0.33.1 -> 0.33.2
python3-googleapis-common-protos: upgrade 1.56.4 -> 1.57.0
python3-google-api-python-client: upgrade 2.65.0 -> 2.66.0
python3-pymongo: upgrade 4.3.2 -> 4.3.3
lldpd: upgrade 1.0.15 -> 1.0.16
audit: upgrade 3.0.8 -> 3.0.9
ccid: upgrade 1.5.0 -> 1.5.1
colord: upgrade 1.4.5 -> 1.4.6
ctags: upgrade 5.9.20221113.0 -> 5.9.20221120.0
flatbuffers: upgrade 22.10.26 -> 22.11.23
libglvnd: upgrade 1.5.0 -> 1.6.0
gensio: upgrade 2.5.2 -> 2.6.1
mg: upgrade 20220614 -> 20221112
nbdkit: upgrade 1.33.2 -> 1.33.3
xfstests: upgrade 2022.10.30 -> 2022.11.06
pcsc-lite: upgrade 1.9.8 -> 1.9.9
python3-matplotlib-inline: upgrade 0.1.2 -> 0.1.6
python3-astroid: upgrade 2.12.12 -> 2.12.13
python3-asyncinotify: upgrade 2.0.5 -> 2.0.8
python3-charset-normalizer: upgrade 3.0.0 -> 3.0.1
python3-dateparser: upgrade 1.1.0 -> 1.1.4
python3-can: upgrade 4.0.0 -> 4.1.0
python3-flask-socketio: upgrade 5.3.1 -> 5.3.2
python3-ipython: upgrade 8.2.0 -> 8.6.0
python3-langtable: upgrade 0.0.60 -> 0.0.61
python3-jedi: upgrade 0.18.1 -> 0.18.2
python3-grpcio-tools: upgrade 1.50.0 -> 1.51.0
python3-grpcio: upgrade 1.50.0 -> 1.51.0
python3-networkx: upgrade 2.8.7 -> 2.8.8
python3-pyatspi: upgrade 2.38.2 -> 2.46.0
python3-pandas: upgrade 1.5.1 -> 1.5.2
python3-pybind11-json: upgrade 0.2.11 -> 0.2.13
python3-pychromecast: upgrade 12.1.4 -> 13.0.1
python3-pycodestyle: upgrade 2.9.1 -> 2.10.0
xterm: upgrade 373 -> 377
smarty: upgrade 4.2.1 -> 4.3.0
spdlog: upgrade 1.10.0 -> 1.11.0
python3-pyperf: upgrade 2.4.1 -> 2.5.0
python3-pyflakes: upgrade 2.5.0 -> 3.0.1
python3-pymisp: upgrade 2.4.157 -> 2.4.165.1
capnproto: upgrade 0.10.2 -> 0.10.3
libass: upgrade 0.16.0 -> 0.17.0
ctags: upgrade 5.9.20221120.0 -> 5.9.20221127.0
libio-socket-ssl-perl: upgrade 2.076 -> 2.077
python3-grpcio-tools: upgrade 1.51.0 -> 1.51.1
python3-asyncinotify: upgrade 2.0.8 -> 3.0.1
python3-grpcio: upgrade 1.51.0 -> 1.51.1
opensc: upgrade 0.22.0 -> 0.23.0
python3-ipython: upgrade 8.6.0 -> 8.7.0
ply: upgrade 2.2.0 -> 2.3.0
python3-apt: upgrade 2.3.0 -> 2.5.0
poppler: upgrade 22.11.0 -> 22.12.0
python3-asttokens: upgrade 2.1.0 -> 2.2.0
python3-cbor2: upgrade 5.4.3 -> 5.4.5
python3-geomet: upgrade 0.3.0 -> 1.0.0
python3-google-api-core: upgrade 2.10.2 -> 2.11.0
python3-google-api-python-client: upgrade 2.66.0 -> 2.68.0
python3-path: upgrade 16.5.0 -> 16.6.0
python3-google-auth: upgrade 2.14.1 -> 2.15.0
zabbix: upgrade 6.2.4 -> 6.2.5
xmlsec1: upgrade 1.2.36 -> 1.2.37
smcroute: upgrade 2.5.5 -> 2.5.6
python3-protobuf: upgrade 4.21.9 -> 4.21.10
python3-traitlets: upgrade 5.5.0 -> 5.6.0
python3-twine: upgrade 4.0.1 -> 4.0.2
python3-web3: upgrade 5.31.1 -> 5.31.2
python3-ujson: upgrade 5.5.0 -> 5.6.0
ctags: upgrade 5.9.20221127.0 -> 5.9.20221204.0
dnsmasq: upgrade 2.87 -> 2.88
flatbuffers: upgrade 22.11.23 -> 22.12.06
nbdkit: upgrade 1.33.3 -> 1.33.4
hwdata: upgrade 0.364 -> 0.365
evolution-data-server: update 3.46.1 -> 3.46.2
xfstests: upgrade 2022.11.06 -> 2022.11.27
python3-protobuf: upgrade 4.21.10 -> 4.21.11
python3-traitlets: upgrade 5.6.0 -> 5.7.0
python3-redis: upgrade 4.3.5 -> 4.4.0
python3-web3: upgrade 5.31.2 -> 5.31.3
python3-asttokens: upgrade 2.2.0 -> 2.2.1
python3-cbor2: upgrade 5.4.5 -> 5.4.6
python3-google-api-python-client: upgrade 2.68.0 -> 2.69.0
python3-gmpy2: upgrade 2.1.2 -> 2.1.3
python3-multidict: upgrade 6.0.2 -> 6.0.3
python3-watchdog: upgrade 2.1.9 -> 2.2.0
python3-pychromecast: upgrade 13.0.1 -> 13.0.2
python3-pymisp: upgrade 2.4.165.1 -> 2.4.166
python3-pytest-xdist: upgrade 3.0.2 -> 3.1.0
python3-yarl: upgrade 1.8.1 -> 1.8.2
zabbix: upgrade 6.2.5 -> 6.2.6
python3-yamlloader: upgrade 1.1.0 -> 1.2.2
tio: upgrade 2.3 -> 2.4
ctags: upgrade 5.9.20221204.0 -> 6.0.20221218.0
dash: upgrade 0.5.11.5 -> 0.5.12
nanopb: upgrade 0.4.6.4 -> 0.4.7
libio-socket-ssl-perl: upgrade 2.077 -> 2.078
libfile-slurper-perl: upgrade 0.013 -> 0.014
protobuf: upgrade 3.21.10 -> 3.21.12
python3-alembic: upgrade 1.8.1 -> 1.9.0
nano: upgrade 7.0 -> 7.1
python3-gmpy2: upgrade 2.1.3 -> 2.1.5
python3-eth-account: upgrade 0.7.0 -> 0.8.0
python3-google-api-python-client: upgrade 2.69.0 -> 2.70.0
python3-protobuf: upgrade 4.21.11 -> 4.21.12
python3-pycares: upgrade 4.2.2 -> 4.3.0
python3-pycurl: upgrade 7.45.1 -> 7.45.2
python3-pychromecast: upgrade 13.0.2 -> 13.0.4
python3-pyproj: upgrade 3.4.0 -> 3.4.1
python3-pydicti: upgrade 1.1.6 -> 1.2.0
python3-sentry-sdk: upgrade 1.11.1 -> 1.12.0
python3-traitlets: upgrade 5.7.0 -> 5.7.1
tio: upgrade 2.4 -> 2.5
python3-sqlalchemy: upgrade 1.4.44 -> 1.4.45
xfsdump: upgrade 3.1.11 -> 3.1.12
python3-isort: upgrade 5.10.1 -> 5.11.3
xfstests: upgrade 2022.11.27 -> 2022.12.11
ctags: upgrade 6.0.20221218.0 -> 6.0.20221225.0
gst-editing-services: upgrade 1.20.4 -> 1.20.5
logcheck: upgrade 1.3.24 -> 1.4.0
memtester: upgrade 4.5.1 -> 4.6.0
libmime-types-perl: upgrade 2.22 -> 2.23
metacity: upgrade 3.46.0 -> 3.46.1
python3-alembic: upgrade 1.9.0 -> 1.9.1
xfstests: upgrade 2022.12.11 -> 2022.12.18
python3-cytoolz: upgrade 0.12.0 -> 0.12.1
python3-asgiref: upgrade 3.5.2 -> 3.6.0
python3-autobahn: upgrade 22.7.1 -> 22.12.1
python3-coverage: upgrade 6.5.0 -> 7.0.1
python3-bitarray: upgrade 2.6.0 -> 2.6.1
python3-imageio: upgrade 2.22.4 -> 2.23.0
python3-isort: upgrade 5.11.3 -> 5.11.4
python3-multidict: upgrade 6.0.3 -> 6.0.4
python3-traitlets: upgrade 5.7.1 -> 5.8.0
python3-pymisp: upgrade 2.4.166 -> 2.4.167
python3-sentry-sdk: upgrade 1.12.0 -> 1.12.1
python3-supervisor: upgrade 4.2.4 -> 4.2.5
wolfssl: upgrade 5.5.3 -> 5.5.4
remmina: upgrade 1.4.28 -> 1.4.29
ser2net: upgrade 4.3.10 -> 4.3.11
tesseract: upgrade 5.2.0 -> 5.3.0
network-manager-applet: upgrade 1.26.0 -> 1.30.0
byacc: upgrade 20221106 -> 20221229
ctags: upgrade 6.0.20221225.0 -> 6.0.20230101.0
flashrom: upgrade 1.2 -> 1.2.1
fontforge: upgrade 20220308 -> 20230101
hunspell: upgrade 1.7.1 -> 1.7.2
libmime-types-perl: upgrade 2.23 -> 2.24
libnet-dns-perl: upgrade 1.35 -> 1.36
tepl: upgrade 6.2.0 -> 6.4.0
tcpdump: upgrade 4.99.1 -> 4.99.2
traceroute: upgrade 2.1.0 -> 2.1.1
openwsman: upgrade 2.7.1 -> 2.7.2
pcsc-tools: upgrade 1.6.0 -> 1.6.1
poppler: upgrade 22.12.0 -> 23.01.0
rsnapshot: upgrade 1.4.4 -> 1.4.5
tree: upgrade 2.0.4 -> 2.1.0
python3-bidict: upgrade 0.22.0 -> 0.22.1
python3-bitarray: upgrade 2.6.1 -> 2.6.2
python3-dateparser: upgrade 1.1.4 -> 1.1.5
python3-lz4: upgrade 4.0.2 -> 4.3.2
python3-mock: upgrade 4.0.3 -> 5.0.0
python3-pillow: upgrade 9.3.0 -> 9.4.0
python3-pydantic: upgrade 1.10.2 -> 1.10.4
python3-pyephem: upgrade 4.1.3 -> 4.1.4
python3-xlsxwriter: upgrade 3.0.3 -> 3.0.5
python3-xxhash: upgrade 3.1.0 -> 3.2.0
dnf-plugins/rpm.py: Fix grammar when RPM_PREFER_ELF_ARCH doesn't exit.
Xiangyu Chen (1):
lldpd: add ptest for lldpd package
Yi Zhao (13):
libpwquality: set correct pam plugin directory
ostree: add runtime dependency bubblewrap for PACKAGECONFIG[selinux]
ostree: fix selinux policy rebuild error on first deployment
frr: upgrade 8.3.1 -> 8.4.1
open-vm-tools: upgrade 12.1.0 -> 12.1.5
libtdb: upgrade 1.4.3 -> 1.4.7
libldb: upgrade 2.3.4 -> 2.6.1
libtalloc: upgrade 2.3.3 -> 2.3.4
libtevent: upgrade 0.10.2 -> 0.13.0
samba upgrade 4.14.14 -> 4.17.4
krb5: upgrade 1.17.2 -> 1.20.1
grubby: update to latest git rev
grubby: drop version 8.40
Zheng Qiu (1):
python3-inotify: add ptest
persianpros (1):
samba: Remove samba related PYTHONHASHSEED patches and use export function
zhengrq.fnst@fujitsu.com (15):
python3-pymodbus: upgrade 3.0.0 -> 3.0.2
python3-pywbemtools: upgrade 1.0.1 -> 1.1.0
python3-stevedore: upgrade 4.1.0 -> 4.1.1
ser2net: upgrade 4.3.9 -> 4.3.10
yelp-tools: upgrade 42.0 -> 42.1
python3-python-vlc: upgrade 3.0.16120 -> 3.0.18121
python3-sqlalchemy: upgrade 1.4.43 -> 1.4.44
python3-zopeinterface: upgrade 5.5.1 -> 5.5.2
python3-simplejson: upgrade 3.17.6 -> 3.18.0
python3-pywbemtools: upgrade 1.0.1 -> 1.1.1
python3-redis: upgrade 4.3.4 -> 4.3.5
python3-texttable: upgrade 1.6.4 -> 1.6.7
python3-sentry-sdk: upgrade 1.9.10 -> 1.11.1
python3-twitter: upgrade 4.10.1 -> 4.12.1
python3-termcolor: upgrade 2.1.0 -> 2.1.1
meta-security: 2aa48e6f4e..f991b20f56:
Alex Kiernan (1):
bubblewrap: Update 0.6.2 -> 0.7.0
Armin Kuster (2):
python3-privacyidea: update to 2.7.4
chipsec: update to 1.9.1
Michael Haener (1):
tpm2-tools: update to 5.3
meta-arm: d5f132b199..5c42f084f7:
Adam Johnston (1):
arm/trusted-services: Fix 'no such file' when building libts
Adrian Herrera (2):
atp: decouple m5readfile from m5ops
atp: move m5readfile to meta-gem5
Adrián Herrera Arcila (5):
atp: fix failing test_readme
gem5: support for EXTRAS
atp: separate recipe for gem5 models
atp: fix machine overrides in recipes
ci: add meta-atp to check-layers
David Bagonyi (1):
meta-arm-toolchain: Drop calls to datastore finalize
Diego Sueiro (2):
arm/classes: Introduce apply_local_src_patches bbclass
arm/trusted-firmware-m: Fix local source patches application
Emekcan (1):
arm/fvp: Upgrade Corstone1000 FVP
Emekcan Aras (6):
arm-bsp/documentation: corstone1000: update the user guide
arm/optee: Move optee-3.18 patches
arm/optee: support optee 3.19
arm-bsp/optee-os: Adds 3.19 bbappend
arm-bsp/optee-os: N1SDP support for optee-os 3.19
arm/qemuarm-secureboot: pin optee-os version
Jon Mason (5):
arm-bsp/trusted-services: rename bbappends with git version
arm/trusted-services: limit the ts compatible machines
arm-bsp/trusted-services: add n1sdp support
arm/trusted-firmware-m: update to 1.6.1
CI: define DEFAULT_TAG and CPU_REQUEST
Khem Raj (1):
gn: Replace lfs64 functions with original counterparts
Mohamed Omar Asaker (5):
arm-bsp/trusted-services: corstone1000: Use the stateless platform service calls
arm-bsp/trusted-firmware-m: Bump TFM to v1.7
arm-bsp/trusted-firmware-m: corstone1000: TFM 1.7
arm-bsp/musca_b1: Edit the platform name
arm-bsp/trusted-firmware-m: Remove TF-M 1.6 recipe
Peter Hoyes (3):
arm/fvp: Backport shlex.join from Python 3.8
arm/fvpboot: Disable timing annotation by default
arm/classes: Ensure patch files are sorted in apply_local_src_patches
Robbie Cao (1):
arm/fvp-base-r-aem: upgrade to version 11.20.15
Ross Burton (17):
CI: revert a meta-clang change which breaks pixman (thus, xserver)
CI: add variables needed for k8s runners
CI: add tags to all jobs
CI: no need to install telnet
CI: fix builds with clang
CI: use the .setup fragment in machine-coverage
arm/fvp-base-a-aem: upgrade to 11.20.15
arm-bsp/edk2-firmware: allow clang builds on juno
ci/get-binary-toolchains: rewrite, slightly
arm-bsp/documentation: update fvp-base documentation to use runfvp
CI: use qemuarm64 for pending-updates report job
meta-atp: remove
meta-gem5: remove
arm/fvp-envelope: name the FVP tarballs for checksums
arm/fvp-envelope: update HOMEPAGE
arm/fvp-base-a-aem: add support for aarch64 binaries
CI: don't pin fvp-base jobs to x86-64
poky: 44bb88cc86..0ce159991d:
Alejandro Hernandez Samaniego (6):
baremetal-image: Avoid overriding qemu variables from IMAGE_CLASSES
rust: Enable building rust from stable, beta and nightly channels
rust: Enable baremetal targets
baremetal-helloworld: Enable x86 and x86-64 ports
baremetal-helloworld: Move from skeleton to recipes-extended matching what rust-hello-world is doing
oe-selftest: Add baremetal toolchain test
Alex Kiernan (20):
rust: Install target.json for target rustc
rust: update 1.65.0 -> 1.66.0
oeqa/runtime/rust: Add basic compile/run test
libstd-rs: Merge .inc into .bb
libstd-rs: Move source directory to library/test
rust-llvm: Merge .inc into .bb
rust-llvm: Update LLVM_VERSION to match embedded version
packagegroup-rust-sdk-target: Add Rust SDK target packagegroup
packagegroup-core-sdk: Add SDK toolchain language selection support
rust: Merge .inc into .bb
rust: Move musl-x86 fix for `__stack_chk_fail_local` to rust-source
cargo: Merge .inc into .bb
cargo: Extend DEBUG_PREFIX_MAP to cover vendor
cargo: Include crossbeam-utils patch
cargo: Drop exclude from world
packagegroup-rust-sdk-target: Add cargo
oeqa/runtime/rust: Add cargo test
classes: image: Set empty weak default IMAGE_LINGUAS
default-distrovars: Include "c" in IMAGE_LINGUAS for glibc
rust: Merge all rustc-source patches into rust-source.inc
Alex Stewart (2):
lsof: add update-alternatives logic
opkg: upgrade to version 0.6.1
Alexander Kanavin (155):
elfutils: update 0.187 -> 0.188
rsync: update 3.2.5 -> 3.2.7
swig: update 4.0.2 -> 4.1.0
tcl: update 8.6.11 -> 8.6.12
quota: update 4.06 -> 4.09
shadow: update 4.12.3 -> 4.13
texinfo: update 6.8 -> 7.0
libhandy: update 1.6.3 -> 1.8.0
xf86-input-mouse: update 1.9.3 -> 1.9.4
flac: update 1.4.0 -> 1.4.2
icu: update 71.1 -> 72-1
libgpg-error: update 1.45 -> 1.46
popt: update 1.18 -> 1.19
vte: update 0.68.0 -> 0.70.1
webkitgtk: update 2.36.7 -> 2.38.2
man-db: update 2.10.2 -> 2.11.1
gawk: update 5.1.1 -> 5.2.1
unfs: update 0.9.22 -> 0.10.0
qemu-helper: depend on unfs3 and pseudo directly
runqemu: do not hardcode the ip address of the nfs server when using tap
selftest/runqemu: reenable the nfs rootfs test
glibc-tests: correctly pull in the actual tests when installing -ptest package
python3: fix tests on x86 (32 bit)
ptest-packagelists.inc: do not run valgrind ptests on 32 bit x86
python3: use the standard shell version of python3-config
python3targetconfig.bbclass: use PYTHONPATH to point to the target config
bitbake: fetch2/wget.py: correctly match versioned directories
devtool/upgrade: correctly handle recipes where S is a subdir of upstream tree
python3-numpy: fix upstream version check
python3-poetry-core: update 1.3.2 -> 1.4.0
tcl: update 8.6.12 -> 8.6.13
libnewt: update 0.52.21 -> 0.52.23
libxdmcp: update 1.1.3 -> 1.1.4
libxpm: update 3.5.13 -> 3.5.14
libxrandr: update 1.5.2 -> 1.5.3
bluez: update 5.65 -> 5.66
libxcrypt: update PV to match SRCREV
python3-dbusmock: update 0.28.4 -> 0.28.6
ruby: merge .inc into .bb
ruby: update 3.1.2 -> 3.1.3
ghostscript: update 9.56.1 -> 10.0.0
tzdata: update 2022d -> 2022g
systemtap: upgrade 4.7 -> 4.8
gnupg: upgrade 2.3.7 -> 2.3.8
ptest-packagelists.inc: correctly assign fast and slow tests
ovmf: update edk2-stable202208 -> edk2-stable202211
llvm: update 15.0.4 -> 15.0.6
tcmode-default.inc: set LLVMVERSION to a major version wildcard
cmake: update 3.24.2 -> 3.25.1
python3-native: further tweak to sysconfig.py to find python includes correctly
libslirp: add recipe to continue slirp support in qemu
qemu: update 7.1.0 -> 7.2.0
systemd: update 251.8 -> 252.4
dpkg: update 1.21.9 -> 1.21.13
python3-installer: update 0.5.1 -> 0.6.0
python3: update 3.11.0 -> 3.11.1
weston: update 11.0.0 -> 11.0.1
xhost: update 1.0.8 -> 1.0.9
xinit: update 1.4.1 -> 1.4.2
xkbcomp: update 1.4.5 -> 1.4.6
xprop: update 1.2.5 -> 1.2.6
xset: update 1.2.4 -> 1.2.5
xvinfo: update 1.1.4 -> 1.1.5
xf86-video-vesa: update 2.5.0 -> 2.6.0
libice: update 1.0.10 -> 1.1.1
libxcomposite: update 0.4.5 -> 0.4.6
libxdamage: update 1.1.5 -> 1.1.6
libxres: update 1.2.1 -> 1.2.2
libxscrnsaver: update 1.2.3 -> 1.2.4
libxv: update 1.0.11 -> 1.0.12
jquery: upgrade 3.6.1 -> 3.6.2
libmodule-build-perl: update 0.4231 -> 0.4232
python3-chardet: upgrade 5.0.0 -> 5.1.0
libarchive: upgrade 3.6.1 -> 3.6.2
stress-ng: upgrade 0.15.00 -> 0.15.01
vulkan: upgrade 1.3.231.1 -> 1.3.236.0
Revert "python3-native: further tweak to sysconfig.py to find python includes correctly"
conf/machine/include: add x86-64-v3 tunes (AVX, AVX2, BMI1, BMI2, F16C, FMA, LZCNT, MOVBE, XSAVE)
go: update 1.19.3 -> 1.19.4
vulkan-samples: update to latest revision
boost-build-native: update 1.80.0 -> 1.81.0
qemu: disable sporadically failing test-io-channel-command
devtool: process local files only for the main branch
libportal: add from meta-openembedded/meta-gnome
libportal: convert from gtk-doc to gi-docgen
epiphany: update 42.4 -> 43.0
qemux86-64: build for x86-64-v3 (2013 Haswell and later) rather than Core 2 from 2006
valgrind: disable tests that started failing after switching to x86-64-v3 target
glib-2.0: upgrade 2.74.3 -> 2.74.4
jquery: upgrade 3.6.2 -> 3.6.3
nasm: update 2.15.05 -> 2.16.01
ffmpeg: use nasm patched-in debug-prefix-map option to restore reproducibility
gtk+3: update 3.24.35 -> 3.24.36
libva-utils: update 2.16.0 -> 2.17.0
xcb-util: update 0.4.0 -> 0.4.1
gnupg: update 2.3.8 -> 2.4.0
libksba: update 1.6.2 -> 1.6.3
python3-pycryptodomex: upgrade 3.15.0 -> 3.16.0
piglit: upgrade to latest revision
python3-setuptools-scm: upgrade 7.0.5 -> 7.1.0
python3-attrs: upgrade 22.1.0 -> 22.2.0
webkitgtk: upgrade 2.38.2 -> 2.38.3
linux-firmware: upgrade 20221109 -> 20221214
harfbuzz: upgrade 5.3.1 -> 6.0.0
python3-pytz: upgrade 2022.6 -> 2022.7
strace: upgrade 6.0 -> 6.1
python3-pycryptodome: upgrade 3.15.0 -> 3.16.0
meson: upgrade 0.64.0 -> 1.0.0
xwayland: upgrade 22.1.5 -> 22.1.7
python3-pyrsistent: upgrade 0.19.2 -> 0.19.3
file: upgrade 5.43 -> 5.44
python3-subunit: upgrade 1.4.1 -> 1.4.2
python3-zipp: upgrade 3.10.0 -> 3.11.0
python3-cryptography: upgrade 38.0.3 -> 38.0.4
logrotate: upgrade 3.20.1 -> 3.21.0
python3-importlib-metadata: upgrade 5.0.0 -> 5.2.0
python3-numpy: upgrade 1.23.4 -> 1.24.1
xserver-xorg: upgrade 21.1.4 -> 21.1.6
puzzles: upgrade to latest revision
vte: upgrade 0.70.1 -> 0.70.2
libpsl: upgrade 0.21.1 -> 0.21.2
libtest-fatal-perl: upgrade 0.016 -> 0.017
python3-urllib3: upgrade 1.26.12 -> 1.26.13
python3-cryptography-vectors: upgrade 38.0.3 -> 38.0.4
python3-setuptools: upgrade 65.5.1 -> 65.6.3
libsdl2: upgrade 2.26.0 -> 2.26.1
python3-gitdb: upgrade 4.0.9 -> 4.0.10
diffoscope: upgrade 224 -> 230
python3-mako: upgrade 1.2.3 -> 1.2.4
python3-sphinx: upgrade 5.3.0 -> 6.0.0
libsolv: upgrade 0.7.22 -> 0.7.23
ruby: upgrade 3.1.3 -> 3.2.0
python3-lxml: upgrade 4.9.1 -> 4.9.2
python3-git: upgrade 3.1.29 -> 3.1.30
curl: upgrade 7.86.0 -> 7.87.0
kmscube: upgrade to latest revision
gobject-introspection: upgrade 1.72.0 -> 1.74.0
python3-dtschema: upgrade 2022.11 -> 2022.12
bash: upgrade 5.2.9 -> 5.2.15
kexec-tools: upgrade 2.0.25 -> 2.0.26
python3-jsonschema: upgrade 4.17.0 -> 4.17.3
python3-pycairo: upgrade 1.21.0 -> 1.23.0
nghttp2: upgrade 1.50.0 -> 1.51.0
python3-certifi: upgrade 2022.9.24 -> 2022.12.7
python3-hypothesis: upgrade 6.57.1 -> 6.61.0
libsndfile1: upgrade 1.1.0 -> 1.2.0
repo: upgrade 2.29.9 -> 2.31
libpcap: upgrade 1.10.1 -> 1.10.2
python3-jsonschema: depend on rfc3339-validator in all cases
python3-strict-rfc3339: remove the recipe
elfutils: do not error out on deprecated declarations
gcr3: limit version check to 3.x versions without odd-even rule
ncurses: restore version check as it's now again working due to release of 6.4
tiff: update 4.4.0 -> 4.5.0
qemu: fix recent reproducibility issues
Alexey Smirnov (1):
classes: make TOOLCHAIN more permissive for kernel
Anton Antonov (1):
rust: Do not use default compiler flags defined in CC crate
Antonin Godard (2):
busybox: always start do_compile with orig config files
busybox: rm temporary files if do_compile was interrupted
Atanas Bunchev (1):
qemu.rst: slirp port forwarding details
Bruce Ashfield (30):
linux-yocto-dev: bump to v6.0+
linux-yocto/5.19: update to v5.19.16
linux-yocto/5.15: update to v5.15.74
linux-yocto/5.19: update to v5.19.17
linux-yocto/5.15: update to v5.15.76
linux-yocto/5.19: cfg: intel and vesa updates
kern-tools: integrate ZFS speedup patch
linux-yocto-dev: bump to v6.1
kernel-devsrc: fix for v6.1+
lttng-modules: fix build for v6.1+
linux-yocto/5.19: security.cfg: remove configs which have been dropped
linux-yocto/5.15: update to v5.15.78
linux-yocto/5.19: fix CONFIG_CRYPTO_CCM mismatch warnings
linux-yocto/5.15: fix CONFIG_CRYPTO_CCM mismatch warnings
linux-yocto/5.19: fix elfutils run-backtrace-native-core ptest failure
linux-libc-headers: add 6.x fetch location
linux-libc-headers: bump to 6.1
linux-yocto/5.19: fix perf build with clang
linux-yocto/5.15: ltp and squashfs fixes
linux-yocto: introduce v6.1 reference kernel recipes
linux-yocto/5.15: fix perf build with clang
linux-yocto/5.15: libbpf: Fix build warning on ref_ctr_off
linux-yocto/5.15: update to v5.15.84
linux-yocto/6.1: update to v6.1.1
linux-yocto/5.15: powerpc: Fix reschedule bug in KUAP-unlocked user copy
linux-yocto/5.19: powerpc: Fix reschedule bug in KUAP-unlocked user copy
linux-yocto/6.1: update to v6.1.3
linux-yocto/6.1: cfg: remove CONFIG_ARM_CRYPTO
yocto-bsps/5.15: update to v5.15.78
linux-yocto/5.15: update to v5.15.80
Carlos Alberto Lopez Perez (3):
xwayland: libxshmfence is needed when dri3 is enabled
recipes: Enable nativesdk for gperf, unifdef, gi-docgen and its dependencies
mesa-gl: gallium is required when enabling x11
Changqing Li (2):
base.bbclass: Fix way to check ccache path
sqlite3: upgrade 3.40.0 -> 3.40.1
Charlie Johnston (1):
opkg: ensure opkg uses private gpg.conf when applying keys.
Chee Yang Lee (1):
migration-guides: add release-notes for 4.1.1
Chen Qi (10):
kernel.bbclass: make KERNEL_DEBUG_TIMESTAMPS work at rebuild
resolvconf: make it work
dhcpcd: fix to work with systemd
bitbake: command.py: cleanup bb.cache.parse_recipe
psplash: consider the situation of psplash not exist for systemd
bc: extend to nativesdk
rm_work: adjust dependency to make do_rm_work_all depend on do_rm_work
selftest: allow '-R' and '-r' be used together
dhcpcd: backport two patches to fix runtime error
libseccomp: fix typo in DESCRIPTION
Christian Eggers (1):
boost: add url lib
David Bagonyi (1):
u-boot: Fix u-boot signing when building with multiple u-boot configs
Dmitry Baryshkov (2):
linux-firmware: upgrade 20221012 -> 20221109
linux-firmware: add new fw file to ${PN}-qcom-adreno-a530
Enguerrand de Ribaucourt (1):
bitbake-layers: fix a typo
Enrico Jörns (1):
sstatesig: emit more helpful error message when not finding sstate manifest
Enrico Scholz (1):
sstate: show progress bar again
Fabre Sébastien (1):
u-boot: Add /boot in SYSROOT_DIRS
Frank de Brabander (4):
bitbake: README: Improve explanation about running the testsuite
bitbake: bin/utils: Ensure locale en_US.UTF-8 is available on the system
bitbake: process: log odd unlink events with bitbake.sock
bitbake: README: add required python version for bitbake
Harald Seiler (1):
opkg: Set correct info_dir and status_file in opkg.conf
Jagadeesh Krishnanjanappa (1):
qemuboot.bbclass: make sure runqemu boots bundled initramfs kernel image
Jan Kircher (1):
toolchain-scripts: compatibility with unbound variable protection
Javier Tia (1):
poky.conf: Add Fedora 36 as supported distro
Joe Slater (2):
python3: Fix CVE-2022-37460
libarchive: fix CVE-2022-36227
Jose Quaresma (2):
Revert "gstreamer1.0: disable flaky gstbin:test_watch_for_state_change test"
gstreamer1.0: Fix race conditions in gstbin tests
Joshua Watt (4):
qemu-helper-native: Correctly pass program name as argv[0]
bitbake: cooker: Use event to terminate parser threads
bitbake: cooker: Start sync thread a little earlier
bitbake: bitbake: Convert to argparse
Kai Kang (4):
xorg-lib-common.inc: set default value of XORG_EXT
libx11-compose-data: 1.6.8 -> 1.8.3
libx11: 1.8.1 -> 1.8.3
libsm: 1.2.3 > 1.2.4
Kasper Revsbech (1):
bitbake: fetch2/wget: handle username/password in uri
Khem Raj (47):
rsync: Delete pedantic errors re-ordering patch
pseudo: Disable LFS on 32bit arches
libxkbcommon: Extend to build native package
iso-codes: Extend to build native packages
xkeyboard-config: Extend to build native package
bluez5: enable position independent executables flag
rpcsvc-proto: Use autoconf knob to enable largefile support
gptfdisk: Enable largefile support functions
libpcre2: Upgrade to 10.42
erofs-utils: Convert from off64_t to off_t
pseudo: Remove 64bit time_t flags
unfs3: Define off64_t in terms of off_t on musl
acpid: Fix largefile enabled build
efivar: Replace off64_t with off_t
ltp: Fix largefile support
acl: Enable largefile support by default
libpciaccess: Do not use 64bit functions for largefile support
mdadm: Use _FILE_OFFSET_BITS to use largefile support
btrfs-tools: Do not use 64bit functions for largefile support
e2fsprogs: Do not use 64bit functions for largefile support
libbsd: Fix build with largefile support
gpgme: Fix with with largefile support
virglrenderer: Replace lseek64 with lseek
nfs-utils: Replace statfs64 with statfs
alsa-utils: Replace off64_t with off_t
lttng-tools: Fix build with largefile support
strace: Add knob to enable largefile support
numactl: Enable largefile support
qemu: Fix build with largefile support
systemd: Fix 252 release build on musl
rust: Do not use open64 on musl in getrandom crate
rust,libstd-rs: Fix build with latest musl
rust-llvm: Fix build on latest musl
cargo: Do not use open64 on musl anymore
llvm: Do not use lseek64
strace: Replace off64_t with off_t in sync_file_range.c test
vulkan-samples: Do not use LFS64 APIs in spdlog
pulseaudio: Do not use 64bit time_t flags
musl: Update to latest on tip of trunk
rust: Fix build with 64bit time_t
stress-ng: Do not enforce gold linker
time64.inc: Add GLIBC_64BIT_TIME_FLAGS on ppc/x86 as well
time64: Remove leading whitespace from GLIBC_64BIT_TIME_FLAGS
mpg123: Enable largefile support
site/powerpc32-linux: Do not cache statvfs64 across glibc and musl
tiff: Add packageconfig knob for webp
site/common-musl: Set ac_cv_sys_file_offset_bits default to 64
Lee Chee Yang (1):
migration-guides: add release-notes for 4.0.6
Luca Boccassi (2):
systemd: refresh patch to remove fuzz introduced by rebase on v252
systemd: ship pcrphase/measure tools and units in systemd-extra-utils
Luis (1):
rm_work.bbclass: use HOSTTOOLS 'rm' binary exclusively
Marek Vasut (5):
bitbake: fetch2/git: Prevent git fetcher from fetching gitlab repository metadata
package_rpm: Fix Linux 6.1.0 perf 1.0 version mistranslation
systemd: Make importd depend on glib-2.0 again
bitbake: bitbake-user-manual: Document override :append, :prepend, :remove order
bitbake: fetch2/git: Clarify the meaning of namespace
Markus Volk (12):
ell: upgrade 0.53 -> 0.54
libsdl2: update 2.24.2 -> 2.26.0
graphene: import from meta-oe
gtk4: import recipe from meta-gnome
gcr: rename gcr -> gcr3
gcr: add recipe for gcr-4, needed to build with gtk4
epiphany: use gcr3
gtk4: add tracker-miners runtime dependency
python3-dbusmock: allow to build native
gtk4: update 4.8.2 -> 4.8.3
gcr3: update 3.40.0 -> 3.41.1
librsvg: enable vapi build
Marta Rybczynska (2):
efibootmgr: update compilation with musl
cve-update-db-native: avoid incomplete updates
Martin Jansa (4):
libxml2: upgrade test data from 20080827 to 20130923
nativesdk-rpm: export RPM_ETCCONFIGDIR and MAGIC in environment like RPM_CONFIGDIR
nativesdk-rpm: don't create wrappers for WRAPPER_TOOLS
tune-x86-64-v3.inc: set QEMU_EXTRAOPTIONS like other tune-* files
Mathieu Dubois-Briand (1):
dbus: Add missing CVE product name
Michael Halstead (1):
uninative: Upgrade to 3.8.1 to include libgcc
Michael Opdenacker (34):
manuals: add missing references to classes
manuals: fix paragraphs with the "inherit" word
ref-manual/classes.rst: remove reference to sip.bbclass
manuals: simplify .gitignore files
manuals: split dev-manual/common-tasks.rst
dev-manual/sbom.rst: minor corrections
bitbake: bitbake-user-manual: update references to Yocto Project manual
bitbake.conf: remove SERIAL_CONSOLE variable
bitbake: bitbake-user-manual: add reference to bitbake git repository
ref-manual: add references to variables only documented in the BitBake manual
manuals: add reference to yocto-docs git repository to page footer
manuals: add missing references to variables
manuals: add missing SPDX license header to source files
manuals: fix double colons
ref-manual/resources.rst: fix formating
ref-manual: update references to release notes
manual: improve documentation about using external toolchains
ref-manual/images.rst: fix unnumbered list
manuals: define proper numbered lists
manuals: final removal of SERIAL_CONSOLE variable
ref-manual/resources.rst: improve description of mailing lists
ref-manual/system-requirements.rst: update buildtools instructions
manuals: create references to buildtools
documentation/poky.yaml.in: update minimum python version to 3.8
manuals: prepare 4.2 migration notes
bitbake: bitbake-user-manual: double colon fix
bitbake: bitbake-user-manual: remove "OEBasic" signature generator
migration-guides: fix 4.2 migration note issues
toaster-manual: fix description of introduction video
ref-manual/classes.rst: remove .bbclass from section titles
manuals: simplify references to classes
migration-1.6.rst: fix redundant reference
ref-manual/system-requirements.rst: recommend buildtools for not supported distros
.gitignore: ignore files generated by Toaster
Mikko Rapeli (5):
qemurunner.py: support setting slirp host IP address
runqemu: limit slirp host port forwarding to localhost 127.0.0.1
qemurunner.py: use IP address from command line
dev-manual/runtime-testing.rst: fix oeqa runtime test path
runqemu: add QB_SETUP_CMD and QB_CLEANUP_CMD
Mingli Yu (8):
tcl: correct the header location in tcl.pc
python3: make tkinter available when enabled
sudo: add selinux and audit PACKAGECONFIG
iproute2: add selinux PACKAGECONFIG
util-linux: add selinux PACKAGECONFIG
cronie: add selinux PACKAGECONFIG
psmisc: add selinux PACKAGECONFIG
gcr: add opengl to REQUIRED_DISTRO_FEATURES
Narpat Mali (2):
ffmpeg: fix for CVE-2022-3964
ffmpeg: fix for CVE-2022-3965
Ola x Nilsson (4):
kbd: Don't build tests
glibc: Add ppoll fortify symbol for 64 bit time_t
insane: Add QA check for 32 bit time and file offset functions
time64.conf: Include to enable 64 bit time flags
Ovidiu Panait (1):
kernel.bbclass: remove empty module directories to prevent QA issues
Patrick Williams (1):
kernel-fitimage: reduce dependency to the cpio
Pavel Zhukov (1):
oeqa/rpm.py: Increase timeout and add debug output
Peter Kjellerstedt (1):
recipes, classes: Avoid adding extra whitespace to PACKAGESPLITFUNCS
Peter Marko (2):
externalsrc: fix lookup for .gitmodules
oeqa/selftest/externalsrc: add test for srctree_hash_files
Petr Kubizňák (1):
harfbuzz: remove bindir only if it exists
Petr Vorel (1):
iputils: update to 20221126
Polampalli, Archana (1):
libpam: fix CVE-2022-28321
Qiu, Zheng (3):
valgrind: remove most hidden tests for arm64
tiff: Security fix for CVE-2022-3970
vim: upgrade 9.0.0820 -> 9.0.0947
Quentin Schulz (4):
cairo: update patch for CVE-2019-6461 with upstream solution
cairo: fix CVE patches assigned wrong CVE number
docs: kernel-dev: faq: update tip on how to not include kernel in image
docs: migration-guides: migration-4.0: specify variable name change for kernel inclusion in image recipe
Randy MacLeod (1):
valgrind: skip the boost_thread test on arm
Ranjitsinh Rathod (1):
curl: Correct LICENSE from MIT-open-group to curl
Ravula Adhitya Siddartha (2):
linux-yocto/5.15: update genericx86* machines to v5.15.78
linux-yocto/5.19: update genericx86* machines to v5.19.17
Richard Purdie (97):
bitbake: cache/cookerdata: Move recipe parsing functions from cache to databuilder
bitbake: cache: Drop broken/unused code
bitbake: cache: Drop unused function
bitbake: server: Ensure cooker profiling works
bitbake: worker/runqueue: Reduce initial data transfer in workerdata
bitbake: cache: Drop support for not saving the cache file
bitbake: runqueue: Add further debug for sstate reuse issues
bitbake: runqueue: Fix race issues around hash equivalence and sstate reuse
bitbake: data/siggen: Switch to use frozensets and optimize
bitbake: data_smart: Add debugging for overrides stability issue
bitbake: utils: Allow to_boolean to support int values
base: Drop do_package base definition
bitbake: data: Drop obsolete pydoc/path code
bitbake: BBHandler: Remove pointless global variable declarations
bitbake: runqueue: Improve error message for missing multiconfig
bitbake: data_smart: Small cache reuse optimization
bitbake.conf: Simplify CACHE setting
oeqa/selftest/tinfoil: Add test for separate config_data with recipe_parse_file()
qemu: Ensure libpng dependency is deterministic
bitbake: data: Tweak code layout
bitbake: cache/siggen: Simplify passing basehash data into the cache
bitbake: siggen/cache: Optionally allow adding siggen hash data to the bitbake cache
bitbake: parse: Add support for addpylib conf file directive and BB_GLOBAL_PYMODULES
bitbake: cookerdata: Ensure layers use LAYERSERIES_COMPAT fairly
base: Switch to use addpylib directive and BB_GLOBAL_PYMODULES
devtool/friends: Use LAYERSERIES_CORENAMES when generating LAYERSERIES_COMPAT entries
scripts/checklayer: Update to match bitbake changes
yocto-check-layer: Allow OE-Core to be tested
bitbake: main: Add timestamp to server retry messages
bitbake: main/server: Add lockfile debugging upon server retry
poky/poky-tiny: Drop largefile mentions
lib/sstatesig: Drop OEBasic siggen
bitbake: siggen: Drop non-multiconfig aware siggen support
bitbake: build/siggen/runqueue: Drop do_setscene references
bitbake: bitbake: Bump minimum python version requirement to 3.8
sanity: Update minimum python version to 3.8
bitbake: main/process: Add extra sockname debugging
Revert "kernel-fitimage: reduce dependency to the cpio"
bitbake: siggen: Directly store datacaches reference
bitbake: bitbake: siggen/runqueue: Switch to using RECIPE_SIGGEN_INFO feature for signature dumping
bitbake: siggen: Add dummy dataCaches from task context/datastore
bitbake: build/siggen: Rework stamps functions
bitbake: siggen: Clarify which fn is meant
bitbake: ast/data/codeparser: Add dependencies from python module functions
bitbake: codeparser/data: Add vardepsexclude support to module dependency code
bitbake.conf: Add module function vardepsexclude entries
time64: Rename to a .inc file to match the others
bitbake: command: Add ping command
bitbake: cache: Allow compression of the data in SiggenRecipeInfo
bitbake: siggen: Minor code improvement
bitbake: server/process: Add bitbake.sock race handling
oeqa/concurrencytest: Add number of failures to summary output
python3-poetry-core: Fix determinism issue breaking reproducibility
bitbake: cache/siggen: Fix cache issues with signature handling
bitbake: event: builtins fix for 'd' deletion
bitbake: cooker: Ensure cache is cleared for partial resets
bitbake: tinfoil: Ensure CommandExit is handled
bitbake: cache: Drop reciever side counting for SiggenRecipeInfo
bitbake: knotty: Avoid looping with tracebacks
bitbake: event: Add enable/disable heartbeat code
bitbake: cooker/cookerdata: Rework the way the datastores are reset
bitbake: server/process: Improve exception and idle function logging
bitbake: command: Tweak finishAsyncCommand ordering to avoid races
bitbake: cooker: Ensure commands clean up any parser processes
bitbake: server/process: Improve idle loop exit code
bitbake: event: Always use threadlock
bitbake: server/process: Add locking around idle functions accesses
bitbake: server/process: Run idle commands in a separate idle thread
bitbake: knotty: Ping the server/cooker periodically
bitbake: cookerdata: Fix cache/reparsing issue
bitbake: cookerdata: Fix previous commit to use a string, not a generator
bitbake: command: Ensure that failure cases call finishAsyncComand
layer.conf: Update to use mickledore as the layer series name
layer.conf: Mark master as compatible with mickledore
bitbake: lib/bb: Update thread/process locks to use a timeout
package: Move fixup_perms function to bb function library
package: Move get_conffiles/files_from_filevars functions to lib
package: Move pkgdata handling functions to oe.packagedata
package: Move emit_pkgdata to packagedata.py
package: Move package functions to function library
package: Drop unused function and obsolete comment
package: Move mapping_rename_hook to packagedata function library
python3-cython: Use PACKAGESPLITFUNCS instead of PACKAGEBUILDPKGD
package: Drop support for PACKAGEBUILDPKGD function customisation
recipes/classes: Drop prepend/append usage with PACKAGESPLITFUNCS
bitbake: cooker: Rework the parsing results submission
bitbake: cooker: Clean up inotify idle handler
uninative-tarball: Add libgcc
patchelf: Add fix submitted upstream for uninative segfaults
bitbake: cooker/command: Drop async command handler indirection via cooker
bitbake: process/cooker/command: Fix currentAsyncCommand locking/races
uninative: Ensure uninative is enabled in all cases for BuildStarted event
qemux86-64: Reduce tuning to core2-64
bitbake: tinfoil: Don't wait for events indefinitely
bitbake: knotty: Improve shutdown handling
bitbake: cooker: Fix exit handling issues
bitbake: server/process: Move heartbeat to idle thread
Robert Andersson (1):
go-crosssdk: avoid host contamination by GOCACHE
Ross Burton (28):
build-appliance-image: Update to master head revision
lib/buildstats: fix parsing of trees with reduced_proc_pressure directories
combo-layer: remove unused import
combo-layer: dont use bb.utils.rename
combo-layer: add sync-revs command
libxml2: upgrade 2.9.14 -> 2.10.3
libxml2: add more testing
python3-packaging: upgrade to 22.0
python3-hatchling: remove python3-tomli DEPENDS
python3-cryptography: remove python3-tomli RDEPENDS
meson: drop redundant is_debianlike() patch
meson: always use meson subcommands
libepoxy: remove upstreamed patch
gtk+3: upgrade 3.24.34 -> 3.24.35
gtk+3: port to Meson
meson: no need to rebuild on install
at-spi2-core: clean up x11 enabling
at-spi2-core: disable API docs if x11 is disabled
gtk+3: fix reproducible builds
lsof: upgrade 4.96.4 -> 4.96.5
pango: upgrade 1.50.11 -> 1.50.12
python3-hatch-vcs: upgrade 0.2.0 -> 0.3.0
python3-hatchling: upgrade 1.11.1 -> 1.12.1
python3-pathspec: upgrade 0.10.1 -> 0.10.3
rm_work: handle non-existant stamps directory
oeqa/selftest/debuginfod: improve testcase
elfutils: disable deprecation errors in all builds, not just native
curl: don't enable debug builds
Ryan Eatmon (1):
go: Update reproducibility patch to fix panic errors
Sandeep Gundlupet Raju (3):
libdrm: Remove libdrm-kms package
kernel-fitimage: Adjust order of dtb/dtbo files
kernel-fitimage: Allow user to select dtb when multiple dtb exists
Saul Wold (1):
at: Change when files are copied
Sergei Zhmylev (1):
oeqa/qemurunner: implement vmdk images support
Tim Orling (7):
python3-hypothesis: upgrade 6.56.4 -> 6.57.1
at-spi2-core: upgrade 2.44.1 -> 2.46.0
mirrors.bbclass: update CPAN_MIRROR
libtry-tiny-perl: add recipe for 0.31
libtest-fatal-perl: add recipe for 0.016
libtest-warnings-perl: move from meta-perl
liburi-perl: upgrade 5.08 -> 5.17
Trevor Woerner (1):
local.conf.sample: update bbclass locations
Vincent Davis Jr (1):
mesa: enable glvnd support
Wang Mingyu (49):
btrfs-tools: upgrade 6.0 -> 6.0.1
libpipeline: upgrade 1.5.6 -> 1.5.7
btrfs-tools: upgrade 6.0.1 -> 6.0.2
bind: upgrade 9.18.8 -> 9.18.9
ccache: upgrade 4.7.2 -> 4.7.4
dropbear: upgrade 2022.82 -> 2022.83
libinput: upgrade 1.21.0 -> 1.22.0
libxft: upgrade 2.3.6 -> 2.3.7
mpfr: upgrade 4.1.0 -> 4.1.1
glib-2.0: upgrade 2.74.1 -> 2.74.3
libxcrypt-compat: upgrade 4.4.30 -> 4.4.33
patchelf: upgrade 0.16.1 -> 0.17.0
pciutils: upgrade 3.8.0 -> 3.9.0
shaderc: upgrade 2022.3 -> 2022.4
sqlite3: upgrade 3.39.4 -> 3.40.0
stress-ng: upgrade 0.14.06 -> 0.15.00
swig: upgrade 4.1.0 -> 4.1.1
texinfo: upgrade 7.0 -> 7.0.1
usbutils: upgrade 014 -> 015
xz: upgrade 5.2.7 -> 5.2.9
wayland-protocols: upgrade 1.28 -> 1.31
gnu-config: upgrade to latest revision
libfontenc: upgrade 1.1.6 -> 1.1.7
libpcre2: upgrade 10.40 -> 10.41
libpng: upgrade 1.6.38 -> 1.6.39
libxau: upgrade 1.0.10 -> 1.0.11
libxkbfile: upgrade 1.1.1 -> 1.1.2
libxshmfence: upgrade 1.3.1 -> 1.3.2
xrandr: upgrade 1.5.1 -> 1.5.2
boost: upgrade 1.80.0 -> 1.81.0
ell: upgrade 0.54 -> 0.55
git: upgrade 2.38.1 -> 2.39.0
help2man: upgrade 1.49.2 -> 1.49.3
iproute2: upgrade 6.0.0 -> 6.1.0
libmpc: upgrade 1.2.1 -> 1.3.1
makedepend: upgrade 1.0.7 -> 1.0.8
psmisc: upgrade 23.5 -> 23.6
xz: upgrade 5.2.9 -> 5.4.0
gstreamer1.0: upgrade 1.20.4 -> 1.20.5
bind: upgrade 9.18.9 -> 9.18.10
btrfs-tools: upgrade 6.0.2 -> 6.1
librepo: upgrade 1.14.5 -> 1.15.1
libsdl2: upgrade 2.26.1 -> 2.26.2
libva-utils: upgrade 2.17.0 -> 2.17.1
libxkbcommon: upgrade 1.4.1 -> 1.5.0
mpfr: upgrade 4.1.1 -> 4.2.0
dpkg: upgrade 1.21.13 -> 1.21.17
rxvt-unicode: upgrade 9.30 -> 9.31
virglrenderer: upgrade 0.10.3 -> 0.10.4
Xiangyu Chen (3):
grub: backport patches to fix CVE-2022-28736
openssh: remove RRECOMMENDS to rng-tools for sshd package
grub2: backport patch to fix CVE-2022-2601 CVE-2022-3775
Yoann Congal (2):
bitbake: Group and reorder options in bitbake help
bitbake: main: Move --buildfile help at the end of "Execution" group
leimaohui (1):
libpng: Enable NEON for aarch64 to enensure consistency with arm32.
pgowda (1):
binutils: Add patch to fix CVE-2022-4285
张忠山 (1):
bitbake: data_smart: Use regex consistently for override matching
meta-raspberrypi: 93dadf336c..896566aa92:
Carlos Alberto Lopez Perez (1):
weston: disablepackageconfig options that fail to build with userland drivers
Khem Raj (2):
lirc: Drop upstreamed patch
linux-raspberrypi.inc: Weakly assign COMPATIBLE_MACHINE
Martin Jansa (2):
bluez5: update patches to apply on 5.66 version
layer.conf: update LAYERSERIES_COMPAT for mickledore
Vincent Davis Jr (5):
rpidistro-vlc,rpidistro-ffmpeg: update COMPATIBLE_HOST regex
rpidistro-vlc: upgrade 3.0.12 -> 3.0.17
rpi-default-providers: add libav and libpostproc
rpidistro-ffmpeg: upgrade 4.3.2 -> 4.3.4
rpidistro-ffmpeg: remove --enable-v4l2-request flag
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: Ied8537beedde0f83790e6e3595057db45f408107
diff --git a/poky/bitbake/lib/bb/main.py b/poky/bitbake/lib/bb/main.py
index 93eda36..92d8dc0 100755
--- a/poky/bitbake/lib/bb/main.py
+++ b/poky/bitbake/lib/bb/main.py
@@ -12,11 +12,12 @@
import os
import sys
import logging
-import optparse
+import argparse
import warnings
import fcntl
import time
import traceback
+import datetime
import bb
from bb import event
@@ -43,18 +44,18 @@
else:
return optionlist[0]
-class BitbakeHelpFormatter(optparse.IndentedHelpFormatter):
- def format_option(self, option):
+class BitbakeHelpFormatter(argparse.HelpFormatter):
+ def _get_help_string(self, action):
# We need to do this here rather than in the text we supply to
# add_option() because we don't want to call list_extension_modules()
# on every execution (since it imports all of the modules)
# Note also that we modify option.help rather than the returned text
# - this is so that we don't have to re-format the text ourselves
- if option.dest == 'ui':
+ if action.dest == 'ui':
valid_uis = list_extension_modules(bb.ui, 'main')
- option.help = option.help.replace('@CHOICES@', present_options(valid_uis))
+ return action.help.replace('@CHOICES@', present_options(valid_uis))
- return optparse.IndentedHelpFormatter.format_option(self, option)
+ return action.help
def list_extension_modules(pkg, checkattr):
"""
@@ -114,180 +115,205 @@
warnings.showwarning = _showwarning
def create_bitbake_parser():
- parser = optparse.OptionParser(
- formatter=BitbakeHelpFormatter(),
- version="BitBake Build Tool Core version %s" % bb.__version__,
- usage="""%prog [options] [recipename/target recipe:do_task ...]
+ parser = argparse.ArgumentParser(
+ description="""\
+ It is assumed there is a conf/bblayers.conf available in cwd or in BBPATH which
+ will provide the layer, BBFILES and other configuration information.
+ """,
+ formatter_class=BitbakeHelpFormatter,
+ allow_abbrev=False,
+ add_help=False, # help is manually added below in a specific argument group
+ )
- Executes the specified task (default is 'build') for a given set of target recipes (.bb files).
- It is assumed there is a conf/bblayers.conf available in cwd or in BBPATH which
- will provide the layer, BBFILES and other configuration information.""")
+ general_group = parser.add_argument_group('General options')
+ task_group = parser.add_argument_group('Task control options')
+ exec_group = parser.add_argument_group('Execution control options')
+ logging_group = parser.add_argument_group('Logging/output control options')
+ server_group = parser.add_argument_group('Server options')
+ config_group = parser.add_argument_group('Configuration options')
- parser.add_option("-b", "--buildfile", action="store", dest="buildfile", default=None,
- help="Execute tasks from a specific .bb recipe directly. WARNING: Does "
- "not handle any dependencies from other recipes.")
+ general_group.add_argument("targets", nargs="*", metavar="recipename/target",
+ help="Execute the specified task (default is 'build') for these target "
+ "recipes (.bb files).")
- parser.add_option("-k", "--continue", action="store_false", dest="halt", default=True,
- help="Continue as much as possible after an error. While the target that "
- "failed and anything depending on it cannot be built, as much as "
- "possible will be built before stopping.")
+ general_group.add_argument("-s", "--show-versions", action="store_true",
+ help="Show current and preferred versions of all recipes.")
- parser.add_option("-f", "--force", action="store_true", dest="force", default=False,
- help="Force the specified targets/task to run (invalidating any "
- "existing stamp file).")
+ general_group.add_argument("-e", "--environment", action="store_true",
+ dest="show_environment",
+ help="Show the global or per-recipe environment complete with information"
+ " about where variables were set/changed.")
- parser.add_option("-c", "--cmd", action="store", dest="cmd",
- help="Specify the task to execute. The exact options available "
- "depend on the metadata. Some examples might be 'compile'"
- " or 'populate_sysroot' or 'listtasks' may give a list of "
- "the tasks available.")
-
- parser.add_option("-C", "--clear-stamp", action="store", dest="invalidate_stamp",
- help="Invalidate the stamp for the specified task such as 'compile' "
- "and then run the default task for the specified target(s).")
-
- parser.add_option("-r", "--read", action="append", dest="prefile", default=[],
- help="Read the specified file before bitbake.conf.")
-
- parser.add_option("-R", "--postread", action="append", dest="postfile", default=[],
- help="Read the specified file after bitbake.conf.")
-
- parser.add_option("-v", "--verbose", action="store_true", dest="verbose", default=False,
- help="Enable tracing of shell tasks (with 'set -x'). "
- "Also print bb.note(...) messages to stdout (in "
- "addition to writing them to ${T}/log.do_<task>).")
-
- parser.add_option("-D", "--debug", action="count", dest="debug", default=0,
- help="Increase the debug level. You can specify this "
- "more than once. -D sets the debug level to 1, "
- "where only bb.debug(1, ...) messages are printed "
- "to stdout; -DD sets the debug level to 2, where "
- "both bb.debug(1, ...) and bb.debug(2, ...) "
- "messages are printed; etc. Without -D, no debug "
- "messages are printed. Note that -D only affects "
- "output to stdout. All debug messages are written "
- "to ${T}/log.do_taskname, regardless of the debug "
- "level.")
-
- parser.add_option("-q", "--quiet", action="count", dest="quiet", default=0,
- help="Output less log message data to the terminal. You can specify this more than once.")
-
- parser.add_option("-n", "--dry-run", action="store_true", dest="dry_run", default=False,
- help="Don't execute, just go through the motions.")
-
- parser.add_option("-S", "--dump-signatures", action="append", dest="dump_signatures",
- default=[], metavar="SIGNATURE_HANDLER",
- help="Dump out the signature construction information, with no task "
- "execution. The SIGNATURE_HANDLER parameter is passed to the "
- "handler. Two common values are none and printdiff but the handler "
- "may define more/less. none means only dump the signature, printdiff"
- " means compare the dumped signature with the cached one.")
-
- parser.add_option("-p", "--parse-only", action="store_true",
- dest="parse_only", default=False,
- help="Quit after parsing the BB recipes.")
-
- parser.add_option("-s", "--show-versions", action="store_true",
- dest="show_versions", default=False,
- help="Show current and preferred versions of all recipes.")
-
- parser.add_option("-e", "--environment", action="store_true",
- dest="show_environment", default=False,
- help="Show the global or per-recipe environment complete with information"
- " about where variables were set/changed.")
-
- parser.add_option("-g", "--graphviz", action="store_true", dest="dot_graph", default=False,
- help="Save dependency tree information for the specified "
- "targets in the dot syntax.")
-
- parser.add_option("-I", "--ignore-deps", action="append",
- dest="extra_assume_provided", default=[],
- help="Assume these dependencies don't exist and are already provided "
- "(equivalent to ASSUME_PROVIDED). Useful to make dependency "
- "graphs more appealing")
-
- parser.add_option("-l", "--log-domains", action="append", dest="debug_domains", default=[],
- help="Show debug logging for the specified logging domains")
-
- parser.add_option("-P", "--profile", action="store_true", dest="profile", default=False,
- help="Profile the command and save reports.")
+ general_group.add_argument("-g", "--graphviz", action="store_true", dest="dot_graph",
+ help="Save dependency tree information for the specified "
+ "targets in the dot syntax.")
# @CHOICES@ is substituted out by BitbakeHelpFormatter above
- parser.add_option("-u", "--ui", action="store", dest="ui",
- default=os.environ.get('BITBAKE_UI', 'knotty'),
- help="The user interface to use (@CHOICES@ - default %default).")
+ general_group.add_argument("-u", "--ui",
+ default=os.environ.get('BITBAKE_UI', 'knotty'),
+ help="The user interface to use (@CHOICES@ - default %(default)s).")
- parser.add_option("", "--token", action="store", dest="xmlrpctoken",
- default=os.environ.get("BBTOKEN"),
- help="Specify the connection token to be used when connecting "
- "to a remote server.")
+ general_group.add_argument("--version", action="store_true",
+ help="Show programs version and exit.")
- parser.add_option("", "--revisions-changed", action="store_true",
- dest="revisions_changed", default=False,
- help="Set the exit code depending on whether upstream floating "
- "revisions have changed or not.")
+ general_group.add_argument('-h', '--help', action='help',
+ help='Show this help message and exit.')
- parser.add_option("", "--server-only", action="store_true",
- dest="server_only", default=False,
- help="Run bitbake without a UI, only starting a server "
- "(cooker) process.")
- parser.add_option("-B", "--bind", action="store", dest="bind", default=False,
- help="The name/address for the bitbake xmlrpc server to bind to.")
+ task_group.add_argument("-f", "--force", action="store_true",
+ help="Force the specified targets/task to run (invalidating any "
+ "existing stamp file).")
- parser.add_option("-T", "--idle-timeout", type=float, dest="server_timeout",
- default=os.getenv("BB_SERVER_TIMEOUT"),
- help="Set timeout to unload bitbake server due to inactivity, "
- "set to -1 means no unload, "
- "default: Environment variable BB_SERVER_TIMEOUT.")
+ task_group.add_argument("-c", "--cmd",
+ help="Specify the task to execute. The exact options available "
+ "depend on the metadata. Some examples might be 'compile'"
+ " or 'populate_sysroot' or 'listtasks' may give a list of "
+ "the tasks available.")
- parser.add_option("", "--no-setscene", action="store_true",
- dest="nosetscene", default=False,
- help="Do not run any setscene tasks. sstate will be ignored and "
- "everything needed, built.")
+ task_group.add_argument("-C", "--clear-stamp", dest="invalidate_stamp",
+ help="Invalidate the stamp for the specified task such as 'compile' "
+ "and then run the default task for the specified target(s).")
- parser.add_option("", "--skip-setscene", action="store_true",
- dest="skipsetscene", default=False,
- help="Skip setscene tasks if they would be executed. Tasks previously "
- "restored from sstate will be kept, unlike --no-setscene")
+ task_group.add_argument("--runall", action="append", default=[],
+ help="Run the specified task for any recipe in the taskgraph of the "
+ "specified target (even if it wouldn't otherwise have run).")
- parser.add_option("", "--setscene-only", action="store_true",
- dest="setsceneonly", default=False,
- help="Only run setscene tasks, don't run any real tasks.")
+ task_group.add_argument("--runonly", action="append",
+ help="Run only the specified task within the taskgraph of the "
+ "specified targets (and any task dependencies those tasks may have).")
- parser.add_option("", "--remote-server", action="store", dest="remote_server",
- default=os.environ.get("BBSERVER"),
- help="Connect to the specified server.")
+ task_group.add_argument("--no-setscene", action="store_true",
+ dest="nosetscene",
+ help="Do not run any setscene tasks. sstate will be ignored and "
+ "everything needed, built.")
- parser.add_option("-m", "--kill-server", action="store_true",
- dest="kill_server", default=False,
- help="Terminate any running bitbake server.")
+ task_group.add_argument("--skip-setscene", action="store_true",
+ dest="skipsetscene",
+ help="Skip setscene tasks if they would be executed. Tasks previously "
+ "restored from sstate will be kept, unlike --no-setscene.")
- parser.add_option("", "--observe-only", action="store_true",
- dest="observe_only", default=False,
- help="Connect to a server as an observing-only client.")
+ task_group.add_argument("--setscene-only", action="store_true",
+ dest="setsceneonly",
+ help="Only run setscene tasks, don't run any real tasks.")
- parser.add_option("", "--status-only", action="store_true",
- dest="status_only", default=False,
- help="Check the status of the remote bitbake server.")
- parser.add_option("-w", "--write-log", action="store", dest="writeeventlog",
- default=os.environ.get("BBEVENTLOG"),
- help="Writes the event log of the build to a bitbake event json file. "
- "Use '' (empty string) to assign the name automatically.")
+ exec_group.add_argument("-n", "--dry-run", action="store_true",
+ help="Don't execute, just go through the motions.")
- parser.add_option("", "--runall", action="append", dest="runall",
- help="Run the specified task for any recipe in the taskgraph of the specified target (even if it wouldn't otherwise have run).")
+ exec_group.add_argument("-p", "--parse-only", action="store_true",
+ help="Quit after parsing the BB recipes.")
- parser.add_option("", "--runonly", action="append", dest="runonly",
- help="Run only the specified task within the taskgraph of the specified targets (and any task dependencies those tasks may have).")
+ exec_group.add_argument("-k", "--continue", action="store_false", dest="halt",
+ help="Continue as much as possible after an error. While the target that "
+ "failed and anything depending on it cannot be built, as much as "
+ "possible will be built before stopping.")
+
+ exec_group.add_argument("-P", "--profile", action="store_true",
+ help="Profile the command and save reports.")
+
+ exec_group.add_argument("-S", "--dump-signatures", action="append",
+ default=[], metavar="SIGNATURE_HANDLER",
+ help="Dump out the signature construction information, with no task "
+ "execution. The SIGNATURE_HANDLER parameter is passed to the "
+ "handler. Two common values are none and printdiff but the handler "
+ "may define more/less. none means only dump the signature, printdiff"
+ " means compare the dumped signature with the cached one.")
+
+ exec_group.add_argument("--revisions-changed", action="store_true",
+ help="Set the exit code depending on whether upstream floating "
+ "revisions have changed or not.")
+
+ exec_group.add_argument("-b", "--buildfile",
+ help="Execute tasks from a specific .bb recipe directly. WARNING: Does "
+ "not handle any dependencies from other recipes.")
+
+ logging_group.add_argument("-D", "--debug", action="count", default=0,
+ help="Increase the debug level. You can specify this "
+ "more than once. -D sets the debug level to 1, "
+ "where only bb.debug(1, ...) messages are printed "
+ "to stdout; -DD sets the debug level to 2, where "
+ "both bb.debug(1, ...) and bb.debug(2, ...) "
+ "messages are printed; etc. Without -D, no debug "
+ "messages are printed. Note that -D only affects "
+ "output to stdout. All debug messages are written "
+ "to ${T}/log.do_taskname, regardless of the debug "
+ "level.")
+
+ logging_group.add_argument("-l", "--log-domains", action="append", dest="debug_domains",
+ default=[],
+ help="Show debug logging for the specified logging domains.")
+
+ logging_group.add_argument("-v", "--verbose", action="store_true",
+ help="Enable tracing of shell tasks (with 'set -x'). "
+ "Also print bb.note(...) messages to stdout (in "
+ "addition to writing them to ${T}/log.do_<task>).")
+
+ logging_group.add_argument("-q", "--quiet", action="count", default=0,
+ help="Output less log message data to the terminal. You can specify this "
+ "more than once.")
+
+ logging_group.add_argument("-w", "--write-log", dest="writeeventlog",
+ default=os.environ.get("BBEVENTLOG"),
+ help="Writes the event log of the build to a bitbake event json file. "
+ "Use '' (empty string) to assign the name automatically.")
+
+
+ server_group.add_argument("-B", "--bind", default=False,
+ help="The name/address for the bitbake xmlrpc server to bind to.")
+
+ server_group.add_argument("-T", "--idle-timeout", type=float, dest="server_timeout",
+ default=os.getenv("BB_SERVER_TIMEOUT"),
+ help="Set timeout to unload bitbake server due to inactivity, "
+ "set to -1 means no unload, "
+ "default: Environment variable BB_SERVER_TIMEOUT.")
+
+ server_group.add_argument("--remote-server",
+ default=os.environ.get("BBSERVER"),
+ help="Connect to the specified server.")
+
+ server_group.add_argument("-m", "--kill-server", action="store_true",
+ help="Terminate any running bitbake server.")
+
+ server_group.add_argument("--token", dest="xmlrpctoken",
+ default=os.environ.get("BBTOKEN"),
+ help="Specify the connection token to be used when connecting "
+ "to a remote server.")
+
+ server_group.add_argument("--observe-only", action="store_true",
+ help="Connect to a server as an observing-only client.")
+
+ server_group.add_argument("--status-only", action="store_true",
+ help="Check the status of the remote bitbake server.")
+
+ server_group.add_argument("--server-only", action="store_true",
+ help="Run bitbake without a UI, only starting a server "
+ "(cooker) process.")
+
+
+ config_group.add_argument("-r", "--read", action="append", dest="prefile", default=[],
+ help="Read the specified file before bitbake.conf.")
+
+ config_group.add_argument("-R", "--postread", action="append", dest="postfile", default=[],
+ help="Read the specified file after bitbake.conf.")
+
+
+ config_group.add_argument("-I", "--ignore-deps", action="append",
+ dest="extra_assume_provided", default=[],
+ help="Assume these dependencies don't exist and are already provided "
+ "(equivalent to ASSUME_PROVIDED). Useful to make dependency "
+ "graphs more appealing.")
+
return parser
class BitBakeConfigParameters(cookerdata.ConfigParameters):
def parseCommandLine(self, argv=sys.argv):
parser = create_bitbake_parser()
- options, targets = parser.parse_args(argv)
+ options = parser.parse_intermixed_args(argv[1:])
+
+ if options.version:
+ print("BitBake Build Tool Core version %s" % bb.__version__)
+ sys.exit(0)
if options.quiet and options.verbose:
parser.error("options --quiet and --verbose are mutually exclusive")
@@ -319,7 +345,7 @@
else:
options.xmlrpcinterface = (None, 0)
- return options, targets[1:]
+ return options, options.targets
def bitbake_main(configParams, configuration):
@@ -384,6 +410,9 @@
return 1
+def timestamp():
+ return datetime.datetime.now().strftime('%H:%M:%S.%f')
+
def setup_bitbake(configParams, extrafeatures=None):
# Ensure logging messages get sent to the UI as events
handler = bb.event.LogHandler()
@@ -391,6 +420,11 @@
# In status only mode there are no logs and no UI
logger.addHandler(handler)
+ if configParams.dump_signatures:
+ if extrafeatures is None:
+ extrafeatures = []
+ extrafeatures.append(bb.cooker.CookerFeatures.RECIPE_SIGGEN_INFO)
+
if configParams.server_only:
featureset = []
ui_module = None
@@ -418,7 +452,7 @@
retries = 8
while retries:
try:
- topdir, lock = lockBitbake()
+ topdir, lock, lockfile = lockBitbake()
sockname = topdir + "/bitbake.sock"
if lock:
if configParams.status_only or configParams.kill_server:
@@ -429,18 +463,22 @@
logger.info("Starting bitbake server...")
# Clear the event queue since we already displayed messages
bb.event.ui_queue = []
- server = bb.server.process.BitBakeServer(lock, sockname, featureset, configParams.server_timeout, configParams.xmlrpcinterface)
+ server = bb.server.process.BitBakeServer(lock, sockname, featureset, configParams.server_timeout, configParams.xmlrpcinterface, configParams.profile)
else:
logger.info("Reconnecting to bitbake server...")
if not os.path.exists(sockname):
- logger.info("Previous bitbake instance shutting down?, waiting to retry...")
+ logger.info("Previous bitbake instance shutting down?, waiting to retry... (%s)" % timestamp())
+ procs = bb.server.process.get_lockfile_process_msg(lockfile)
+ if procs:
+ logger.info("Processes holding bitbake.lock (missing socket %s):\n%s" % (sockname, procs))
+ logger.info("Directory listing: %s" % (str(os.listdir(topdir))))
i = 0
lock = None
# Wait for 5s or until we can get the lock
while not lock and i < 50:
time.sleep(0.1)
- _, lock = lockBitbake()
+ _, lock, _ = lockBitbake()
i += 1
if lock:
bb.utils.unlockfile(lock)
@@ -459,9 +497,9 @@
retries -= 1
tryno = 8 - retries
if isinstance(e, (bb.server.process.ProcessTimeout, BrokenPipeError, EOFError, SystemExit)):
- logger.info("Retrying server connection (#%d)..." % tryno)
+ logger.info("Retrying server connection (#%d)... (%s)" % (tryno, timestamp()))
else:
- logger.info("Retrying server connection (#%d)... (%s)" % (tryno, traceback.format_exc()))
+ logger.info("Retrying server connection (#%d)... (%s, %s)" % (tryno, traceback.format_exc(), timestamp()))
if not retries:
bb.fatal("Unable to connect to bitbake server, or start one (server startup failures would be in bitbake-cookerdaemon.log).")
@@ -490,5 +528,5 @@
bb.error("Unable to find conf/bblayers.conf or conf/bitbake.conf. BBPATH is unset and/or not in a build directory?")
raise BBMainFatal
lockfile = topdir + "/bitbake.lock"
- return topdir, bb.utils.lockfile(lockfile, False, False)
+ return topdir, bb.utils.lockfile(lockfile, False, False), lockfile