fp5280g2: Add sensor configs
temperature sensors inlet and outlet of tmp112, adc voltage sensors and
fan-tach sensors.
Tested: Built fp5280g2 board and loaded on the target hardware
successfully and manually verified via DBUS interface.
(From meta-inspur rev: f3c4afcb935e605f727e0552842e418db4eef6fc)
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: I231d14195bffac5451c98bfbabc4ecd836aead67
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
diff --git a/meta-inspur/meta-fp5280g2/recipes-phosphor/sensors/phosphor-hwmon/obmc/hwmon/ahb/apb/bus@1e78a000/i2c-bus@c0/i2c-switch@70/i2c@0/tmp112@4a.conf b/meta-inspur/meta-fp5280g2/recipes-phosphor/sensors/phosphor-hwmon/obmc/hwmon/ahb/apb/bus@1e78a000/i2c-bus@c0/i2c-switch@70/i2c@0/tmp112@4a.conf
new file mode 100644
index 0000000..3f0260b
--- /dev/null
+++ b/meta-inspur/meta-fp5280g2/recipes-phosphor/sensors/phosphor-hwmon/obmc/hwmon/ahb/apb/bus@1e78a000/i2c-bus@c0/i2c-switch@70/i2c@0/tmp112@4a.conf
@@ -0,0 +1,5 @@
+LABEL_temp1 = "psu_inlet"
+WARNHI_temp1 = "63000"
+WARNLO_temp1 = "0"
+CRITHI_temp1 = "65000"
+CRITLO_temp1 = "0"
diff --git a/meta-inspur/meta-fp5280g2/recipes-phosphor/sensors/phosphor-hwmon/obmc/hwmon/ahb/apb/bus@1e78a000/i2c-bus@c0/i2c-switch@70/i2c@1/tmp112@4a.conf b/meta-inspur/meta-fp5280g2/recipes-phosphor/sensors/phosphor-hwmon/obmc/hwmon/ahb/apb/bus@1e78a000/i2c-bus@c0/i2c-switch@70/i2c@1/tmp112@4a.conf
new file mode 100644
index 0000000..7390e77
--- /dev/null
+++ b/meta-inspur/meta-fp5280g2/recipes-phosphor/sensors/phosphor-hwmon/obmc/hwmon/ahb/apb/bus@1e78a000/i2c-bus@c0/i2c-switch@70/i2c@1/tmp112@4a.conf
@@ -0,0 +1,5 @@
+LABEL_temp1 = "ocp_zone"
+WARNHI_temp1 = "63000"
+WARNLO_temp1 = "0"
+CRITHI_temp1 = "65000"
+CRITLO_temp1 = "0"
diff --git a/meta-inspur/meta-fp5280g2/recipes-phosphor/sensors/phosphor-hwmon/obmc/hwmon/ahb/apb/bus@1e78a000/i2c-bus@c0/i2c-switch@70/i2c@2/tmp112@4a.conf b/meta-inspur/meta-fp5280g2/recipes-phosphor/sensors/phosphor-hwmon/obmc/hwmon/ahb/apb/bus@1e78a000/i2c-bus@c0/i2c-switch@70/i2c@2/tmp112@4a.conf
new file mode 100644
index 0000000..642b3d8
--- /dev/null
+++ b/meta-inspur/meta-fp5280g2/recipes-phosphor/sensors/phosphor-hwmon/obmc/hwmon/ahb/apb/bus@1e78a000/i2c-bus@c0/i2c-switch@70/i2c@2/tmp112@4a.conf
@@ -0,0 +1,5 @@
+LABEL_temp1 = "bmc_zone"
+WARNHI_temp1 = "120000"
+WARNLO_temp1 = "0"
+CRITHI_temp1 = "125000"
+CRITLO_temp1 = "0"
diff --git a/meta-inspur/meta-fp5280g2/recipes-phosphor/sensors/phosphor-hwmon/obmc/hwmon/ahb/apb/bus@1e78a000/i2c-bus@c0/tmp112@48.conf b/meta-inspur/meta-fp5280g2/recipes-phosphor/sensors/phosphor-hwmon/obmc/hwmon/ahb/apb/bus@1e78a000/i2c-bus@c0/tmp112@48.conf
new file mode 100644
index 0000000..4189ab3
--- /dev/null
+++ b/meta-inspur/meta-fp5280g2/recipes-phosphor/sensors/phosphor-hwmon/obmc/hwmon/ahb/apb/bus@1e78a000/i2c-bus@c0/tmp112@48.conf
@@ -0,0 +1,5 @@
+LABEL_temp1 = "inlet"
+WARNHI_temp1 = "40000"
+WARNLO_temp1 = "0"
+CRITHI_temp1 = "42000"
+CRITLO_temp1 = "0"
diff --git a/meta-inspur/meta-fp5280g2/recipes-phosphor/sensors/phosphor-hwmon/obmc/hwmon/ahb/apb/bus@1e78a000/i2c-bus@c0/tmp112@49.conf b/meta-inspur/meta-fp5280g2/recipes-phosphor/sensors/phosphor-hwmon/obmc/hwmon/ahb/apb/bus@1e78a000/i2c-bus@c0/tmp112@49.conf
new file mode 100644
index 0000000..615a1cb
--- /dev/null
+++ b/meta-inspur/meta-fp5280g2/recipes-phosphor/sensors/phosphor-hwmon/obmc/hwmon/ahb/apb/bus@1e78a000/i2c-bus@c0/tmp112@49.conf
@@ -0,0 +1,5 @@
+LABEL_temp1 = "outlet"
+WARNHI_temp1 = "68000"
+WARNLO_temp1 = "0"
+CRITHI_temp1 = "70000"
+CRITLO_temp1 = "0"
diff --git a/meta-inspur/meta-fp5280g2/recipes-phosphor/sensors/phosphor-hwmon/obmc/hwmon/ahb/apb/pwm-tacho-controller@1e786000.conf b/meta-inspur/meta-fp5280g2/recipes-phosphor/sensors/phosphor-hwmon/obmc/hwmon/ahb/apb/pwm-tacho-controller@1e786000.conf
new file mode 100644
index 0000000..8835411
--- /dev/null
+++ b/meta-inspur/meta-fp5280g2/recipes-phosphor/sensors/phosphor-hwmon/obmc/hwmon/ahb/apb/pwm-tacho-controller@1e786000.conf
@@ -0,0 +1,17 @@
+LABEL_fan1 = "fan0_0"
+LABEL_fan2 = "fan0_1"
+LABEL_fan3 = "fan1_0"
+LABEL_fan4 = "fan1_1"
+LABEL_fan5 = "fan2_0"
+LABEL_fan6 = "fan2_1"
+LABEL_fan7 = "fan3_0"
+LABEL_fan8 = "fan3_1"
+
+PWM_TARGET_fan1 = "1"
+PWM_TARGET_fan2 = "1"
+PWM_TARGET_fan3 = "2"
+PWM_TARGET_fan4 = "2"
+PWM_TARGET_fan5 = "3"
+PWM_TARGET_fan6 = "3"
+PWM_TARGET_fan7 = "4"
+PWM_TARGET_fan8 = "4"