|author||Joel Stanley <firstname.lastname@example.org>||Thu Jul 14 17:05:15 2022 +0930|
|committer||Joel Stanley <email@example.com>||Wed Aug 03 01:13:44 2022 +0000|
aspeed: Bump socsec to v2.0.0 This removes support for the v1 OTP format and introduces v2, which uses SHA384 checksums. Johnny Huang (6): socsec: add ecdsa sign helper otp_info: update ast10xx header otp: update otptool to v2.0.0 Merge branch 'develop' update test case for 2.0.0 otptool: fix checksum compare Change-Id: I049bd34898be912043e010ef39ff05a888a365da Signed-off-by: Joel Stanley <firstname.lastname@example.org>
OpenBMC is a Linux distribution for management controllers used in devices such as servers, top of rack switches or RAID appliances. It uses Yocto, OpenEmbedded, systemd, and D-Bus to allow easy customization for your platform.
See the Yocto documentation for the latest requirements
$ sudo apt install git python3-distutils gcc g++ make file wget \ gawk diffstat bzip2 cpio chrpath zstd lz4 bzip2
$ sudo dnf install git python3 gcc g++ gawk which bzip2 chrpath cpio hostname file diffutils diffstat lz4 wget zstd rpcgen patch
git clone https://github.com/openbmc/openbmc cd openbmc
Any build requires an environment set up according to your hardware target. There is a special script in the root of this repository that can be used to configure the environment as needed. The script is called
setup and takes the name of your hardware target as an argument.
The script needs to be sourced while in the top directory of the OpenBMC repository clone, and, if run without arguments, will display the list of supported hardware targets, see the following example:
$ . setup <machine> [build_dir] Target machine must be specified. Use one of: bletchley mihawk swift dl360poc mori tatlin-archive-x86 e3c246d4i mtjade tiogapass ethanolx nicole transformers evb-ast2500 olympus-nuvoton vegman-n110 evb-ast2600 on5263m5 vegman-rx20 evb-npcm750 p10bmc vegman-sx20 f0b palmetto witherspoon fp5280g2 quanta-q71l witherspoon-tacoma g220a romulus x11spi gbs s2600wf yosemitev2 gsj s6q zaius kudo s7106 lannister s8036
Once you know the target (e.g. romulus), source the
setup script as follows:
. setup romulus
Additional details can be found in the docs repository.
The OpenBMC community maintains a set of tutorials new users can go through to get up to speed on OpenBMC development out here
Commits submitted by members of the OpenBMC GitHub community are compiled and tested via our Jenkins server. Commits are run through two levels of testing. At the repository level the makefile
make check directive is run. At the system level, the commit is built into a firmware image and run with an arm-softmmu QEMU model against a barrage of CI tests.
Commits submitted by non-members do not automatically proceed through CI testing. After visual inspection of the commit, a CI run can be manually performed by the reviewer.
Support of additional hardware and software packages is always welcome. Please follow the contributing guidelines when making a submission. It is expected that contributions contain test cases.
Issues are managed on GitHub. It is recommended you search through the issues before opening a new one.
First, please do a search on the internet. There's a good chance your question has already been asked.
For technical discussions, please see contact info below for Discord and mailing list information. Please don't file an issue to ask a question. You'll get faster results by using the mailing list or Discord.
Features In Progress
Features Requested but need help
Dive deeper into OpenBMC by opening the docs repository.
The Technical Steering Committee (TSC) guides the project. Members are: