<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"
[<!ENTITY % poky SYSTEM "../poky.ent"> %poky; ] >

<appendix id='kernel-dev-maint-appx'>
<title>Kernel Maintenance</title>

    <section id='tree-construction'>
        <title>Tree Construction</title>
        <para>
            This section describes construction of the Yocto Project kernel source repositories
            as accomplished by the Yocto Project team to create kernel repositories.
            These kernel repositories are found under the heading "Yocto Linux Kernel" at
            <ulink url='&YOCTO_GIT_URL;/cgit.cgi'>&YOCTO_GIT_URL;/cgit.cgi</ulink>
            and can be shipped as part of a Yocto Project release.
            The team creates these repositories by
            compiling and executing the set of feature descriptions for every BSP
            and feature in the product.
            Those feature descriptions list all necessary patches,
            configuration, branching, tagging and feature divisions found in a kernel.
            Thus, the Yocto Project kernel repository (or tree) is built.
        </para>
        <para>
            The existence of this tree allows you to access and clone a particular
            Yocto Project kernel repository and use it to build images based on their configurations
            and features.
        </para>
        <para>
            You can find the files used to describe all the valid features and BSPs
            in the Yocto Project kernel in any clone of the Yocto Project kernel source repository
            Git tree.
            For example, the following command clones the Yocto Project baseline kernel that
            branched off of <filename>linux.org</filename> version 3.19:
            <literallayout class='monospaced'>
     $ git clone git://git.yoctoproject.org/linux-yocto-3.19
            </literallayout>
            For another example of how to set up a local Git repository of the Yocto Project
            kernel files, see the
            "<ulink url='&YOCTO_DOCS_DEV_URL;#local-kernel-files'>Yocto Project Kernel</ulink>" bulleted
            item in the Yocto Project Development Manual.
        </para>
        <para>
            Once you have cloned the kernel Git repository on your local machine, you can
            switch to the <filename>meta</filename> branch within the repository.
            Here is an example that assumes the local Git repository for the kernel is in
            a top-level directory named <filename>linux-yocto-3.19</filename>:
            <literallayout class='monospaced'>
     $ cd linux-yocto-3.19
     $ git checkout -b meta origin/meta
            </literallayout>
            Once you have checked out and switched to the <filename>meta</filename> branch,
            you can see a snapshot of all the kernel configuration and feature descriptions that are
            used to build that particular kernel repository.
            These descriptions are in the form of <filename>.scc</filename> files.
        </para>
        <para>
            You should realize, however, that browsing your local kernel repository
            for feature descriptions and patches is not an effective way to determine what is in a
            particular kernel branch.
            Instead, you should use Git directly to discover the changes in a branch.
            Using Git is an efficient and flexible way to inspect changes to the kernel.
            <note>
                Ground up reconstruction of the complete kernel tree is an action only taken by the
                Yocto Project team during an active development cycle.
                When you create a clone of the kernel Git repository, you are simply making it
                efficiently available for building and development.
            </note>
        </para>
        <para>
            The following steps describe what happens when the Yocto Project Team constructs
            the Yocto Project kernel source Git repository (or tree) found at
            <ulink url='&YOCTO_GIT_URL;/cgit.cgi'></ulink> given the
            introduction of a new top-level kernel feature or BSP.
            These are the actions that effectively create the tree
            that includes the new feature, patch or BSP:
            <orderedlist>
                <listitem><para>A top-level kernel feature is passed to the kernel build subsystem.
                    Normally, this feature is a BSP for a particular kernel type.</para></listitem>
                <listitem><para>The file that describes the top-level feature is located by searching
                    these system directories:
                    <itemizedlist>
                        <listitem><para>The in-tree kernel-cache directories, which are located
                            in <filename>meta/cfg/kernel-cache</filename></para></listitem>
                        <listitem><para>Areas pointed to by <filename>SRC_URI</filename> statements
                            found in recipes</para></listitem>
                    </itemizedlist>
                    For a typical build, the target of the search is a
                    feature description in an <filename>.scc</filename> file
                    whose name follows this format:
                    <literallayout class='monospaced'>
     <replaceable>bsp_name</replaceable>-<replaceable>kernel_type</replaceable>.scc
                    </literallayout>
                </para></listitem>
                <listitem><para>Once located, the feature description is either compiled into a simple script
                    of actions, or into an existing equivalent script that is already part of the
                    shipped kernel.</para></listitem>
                <listitem><para>Extra features are appended to the top-level feature description.
                    These features can come from the
                    <ulink url='&YOCTO_DOCS_REF_URL;#var-KERNEL_FEATURES'><filename>KERNEL_FEATURES</filename></ulink>
                    variable in recipes.</para></listitem>
                <listitem><para>Each extra feature is located, compiled and appended to the script
                    as described in step three.</para></listitem>
                <listitem><para>The script is executed to produce a series of <filename>meta-*</filename>
                    directories.
                    These directories are descriptions of all the branches, tags, patches and configurations that
                    need to be applied to the base Git repository to completely create the
                    source (build) branch for the new BSP or feature.</para></listitem>
                <listitem><para>The base repository is cloned, and the actions
                    listed in the <filename>meta-*</filename> directories are applied to the
                    tree.</para></listitem>
                <listitem><para>The Git repository is left with the desired branch checked out and any
                    required branching, patching and tagging has been performed.</para></listitem>
            </orderedlist>
        </para>
        <para>
            The kernel tree is now ready for developer consumption to be locally cloned,
            configured, and built into a Yocto Project kernel specific to some target hardware.
            <note><para>The generated <filename>meta-*</filename> directories add to the kernel
                as shipped with the Yocto Project release.
                Any add-ons and configuration data are applied to the end of an existing branch.
                The full repository generation that is found in the
                official Yocto Project kernel repositories at
                <ulink url='&YOCTO_GIT_URL;/cgit.cgi'>http://git.yoctoproject.org/cgit.cgi</ulink>
                is the combination of all supported boards and configurations.</para>
                <para>The technique the Yocto Project team uses is flexible and allows for seamless
                blending of an immutable history with additional patches specific to a
                deployment.
                Any additions to the kernel become an integrated part of the branches.</para>
            </note>
        </para>
    </section>

    <section id='build-strategy'>
        <title>Build Strategy</title>

<!--
        <para>
            <emphasis>AR - Darren Hart:</emphasis>  Some parts of this section
            need to be in the
            "<link linkend='using-an-iterative-development-process'>Using an Iterative Development Process</link>"
            section.
            Darren needs to figure out which parts and identify them.
        </para>
-->

        <para>
            Once a local Git repository of the Yocto Project kernel exists on a development system,
            you can consider the compilation phase of kernel development - building a kernel image.
            Some prerequisites exist that are validated by the build process before compilation
            starts:
        </para>

        <itemizedlist>
            <listitem><para>The
                <ulink url='&YOCTO_DOCS_REF_URL;#var-SRC_URI'><filename>SRC_URI</filename></ulink> points
                to the kernel Git repository.</para></listitem>
            <listitem><para>A BSP build branch exists.
                This branch has the following form:
                <literallayout class='monospaced'>
     <replaceable>kernel_type</replaceable>/<replaceable>bsp_name</replaceable>
                </literallayout></para></listitem>
        </itemizedlist>

        <para>
            The OpenEmbedded build system makes sure these conditions exist before attempting compilation.
            Other means, however, do exist, such as as bootstrapping a BSP.
        </para>

        <para>
            Before building a kernel, the build process verifies the tree
            and configures the kernel by processing all of the
            configuration "fragments" specified by feature descriptions in the <filename>.scc</filename>
            files.
            As the features are compiled, associated kernel configuration fragments are noted
            and recorded in the <filename>meta-*</filename> series of directories in their compilation order.
            The fragments are migrated, pre-processed and passed to the Linux Kernel
            Configuration subsystem (<filename>lkc</filename>) as raw input in the form
            of a <filename>.config</filename> file.
            The <filename>lkc</filename> uses its own internal dependency constraints to do the final
            processing of that information and generates the final <filename>.config</filename> file
            that is used during compilation.
        </para>

        <para>
            Using the board's architecture and other relevant values from the board's template,
            kernel compilation is started and a kernel image is produced.
        </para>

        <para>
            The other thing that you notice once you configure a kernel is that
            the build process generates a build tree that is separate from your kernel's local Git
            source repository tree.
            This build tree has a name that uses the following form, where
            <filename>${MACHINE}</filename> is the metadata name of the machine (BSP) and "kernel_type" is one
            of the Yocto Project supported kernel types (e.g. "standard"):
        <literallayout class='monospaced'>
     linux-${MACHINE}-<replaceable>kernel_type</replaceable>-build
        </literallayout>
        </para>

        <para>
            The existing support in the <filename>kernel.org</filename> tree achieves this
            default functionality.
        </para>

        <para>
            This behavior means that all the generated files for a particular machine or BSP are now in
            the build tree directory.
            The files include the final <filename>.config</filename> file, all the <filename>.o</filename>
            files, the <filename>.a</filename> files, and so forth.
            Since each machine or BSP has its own separate
            <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
            in its own separate branch
            of the Git repository, you can easily switch between different builds.
        </para>
    </section>
</appendix>
<!--
vim: expandtab tw=80 ts=4
-->