
# Pulled from OpenEmbedded
# 
# Commented by: Saul Wold <saul.wold@intel.com>

Upstream-Status: Inappropriate [licensing]

Index: gettext-0.16.1/autoconf-lib-link/m4/lib-link.m4
===================================================================
--- gettext-0.16.1.orig/autoconf-lib-link/m4/lib-link.m4	2006-11-27 09:01:58.000000000 -0800
+++ gettext-0.16.1/autoconf-lib-link/m4/lib-link.m4	2011-03-17 00:36:08.710836720 -0700
@@ -6,12 +6,14 @@
 
 dnl From Bruno Haible.
 
-AC_PREREQ(2.50)
+AC_PREREQ(2.54)
 
 dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and
 dnl the libraries corresponding to explicit and implicit dependencies.
 dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and
 dnl augments the CPPFLAGS variable.
+dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname
+dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
 AC_DEFUN([AC_LIB_LINKFLAGS],
 [
   AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
@@ -24,13 +26,16 @@
     ac_cv_lib[]Name[]_libs="$LIB[]NAME"
     ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME"
     ac_cv_lib[]Name[]_cppflags="$INC[]NAME"
+    ac_cv_lib[]Name[]_prefix="$LIB[]NAME[]_PREFIX"
   ])
   LIB[]NAME="$ac_cv_lib[]Name[]_libs"
   LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs"
   INC[]NAME="$ac_cv_lib[]Name[]_cppflags"
+  LIB[]NAME[]_PREFIX="$ac_cv_lib[]Name[]_prefix"
   AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
   AC_SUBST([LIB]NAME)
   AC_SUBST([LTLIB]NAME)
+  AC_SUBST([LIB]NAME[_PREFIX])
   dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the
   dnl results of this search when this library appears as a dependency.
   HAVE_LIB[]NAME=yes
@@ -46,6 +51,8 @@
 dnl LTLIB${NAME} variables and augments the CPPFLAGS variable, and
 dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs
 dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty.
+dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname
+dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
 AC_DEFUN([AC_LIB_HAVE_LINKFLAGS],
 [
   AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
@@ -82,17 +89,24 @@
     CPPFLAGS="$ac_save_CPPFLAGS"
     LIB[]NAME=
     LTLIB[]NAME=
+    LIB[]NAME[]_PREFIX=
+
   fi
   AC_SUBST([HAVE_LIB]NAME)
   AC_SUBST([LIB]NAME)
   AC_SUBST([LTLIB]NAME)
+  AC_SUBST([LIB]NAME[_PREFIX])
   undefine([Name])
   undefine([NAME])
 ])
 
 dnl Determine the platform dependent parameters needed to use rpath:
-dnl libext, shlibext, hardcode_libdir_flag_spec, hardcode_libdir_separator,
-dnl hardcode_direct, hardcode_minus_L.
+dnl   acl_libext,
+dnl   acl_shlibext,
+dnl   acl_hardcode_libdir_flag_spec,
+dnl   acl_hardcode_libdir_separator,
+dnl   acl_hardcode_direct,
+dnl   acl_hardcode_minus_L.
 AC_DEFUN([AC_LIB_RPATH],
 [
   dnl Tell automake >= 1.10 to complain if config.rpath is missing.
@@ -109,12 +123,14 @@
     acl_cv_rpath=done
   ])
   wl="$acl_cv_wl"
-  libext="$acl_cv_libext"
-  shlibext="$acl_cv_shlibext"
-  hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
-  hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
-  hardcode_direct="$acl_cv_hardcode_direct"
-  hardcode_minus_L="$acl_cv_hardcode_minus_L"
+  acl_libext="$acl_cv_libext"
+  acl_shlibext="$acl_cv_shlibext"
+  acl_libname_spec="$acl_cv_libname_spec"
+  acl_library_names_spec="$acl_cv_library_names_spec"
+  acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
+  acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
+  acl_hardcode_direct="$acl_cv_hardcode_direct"
+  acl_hardcode_minus_L="$acl_cv_hardcode_minus_L"
   dnl Determine whether the user wants rpath handling at all.
   AC_ARG_ENABLE(rpath,
     [  --disable-rpath         do not hardcode runtime library paths],
@@ -124,20 +140,24 @@
 dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and
 dnl the libraries corresponding to explicit and implicit dependencies.
 dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables.
+dnl Also, sets the LIB${NAME}_PREFIX variable to nonempty if libname was found
+dnl in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
 AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
 [
   AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
   define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
                                [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
+  dnl Autoconf >= 2.61 supports dots in --with options.
+  define([N_A_M_E],[m4_if(m4_version_compare(m4_defn([m4_PACKAGE_VERSION]),[2.61]),[-1],[translit([$1],[.],[_])],[$1])])
   dnl By default, look in $includedir and $libdir.
   use_additional=yes
   AC_LIB_WITH_FINAL_PREFIX([
     eval additional_includedir=\"$includedir\"
     eval additional_libdir=\"$libdir\"
   ])
-  AC_LIB_ARG_WITH([lib$1-prefix],
-[  --with-lib$1-prefix[=DIR]  search for lib$1 in DIR/include and DIR/lib
-  --without-lib$1-prefix     don't search for lib$1 in includedir and libdir],
+  AC_LIB_ARG_WITH([lib]N_A_M_E[-prefix],
+[  --with-lib]N_A_M_E[-prefix[=DIR]  search for lib$1 in DIR/include and DIR/lib
+  --without-lib]N_A_M_E[-prefix     don't search for lib$1 in includedir and libdir],
 [
     if test "X$withval" = "Xno"; then
       use_additional=no
@@ -158,6 +178,7 @@
   LIB[]NAME=
   LTLIB[]NAME=
   INC[]NAME=
+  LIB[]NAME[]_PREFIX=
   rpathdirs=
   ltrpathdirs=
   names_already_handled=
@@ -197,27 +218,53 @@
           found_la=
           found_so=
           found_a=
+          eval libname=\"$acl_libname_spec\"    # typically: libname=lib$name
+          if test -n "$acl_shlibext"; then
+            shrext=".$acl_shlibext"             # typically: shrext=.so
+          else
+            shrext=
+          fi
           if test $use_additional = yes; then
-            if test -n "$shlibext" \
-               && { test -f "$additional_libdir/lib$name.$shlibext" \
-                    || { test "$shlibext" = dll \
-                         && test -f "$additional_libdir/lib$name.dll.a"; }; }; then
-              found_dir="$additional_libdir"
-              if test -f "$additional_libdir/lib$name.$shlibext"; then
-                found_so="$additional_libdir/lib$name.$shlibext"
+            dir="$additional_libdir"
+            dnl The same code as in the loop below:
+            dnl First look for a shared library.
+            if test -n "$acl_shlibext"; then
+              if test -f "$dir/$libname$shrext"; then
+                found_dir="$dir"
+                found_so="$dir/$libname$shrext"
               else
-                found_so="$additional_libdir/lib$name.dll.a"
+                if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+                  ver=`(cd "$dir" && \
+                        for f in "$libname$shrext".*; do echo "$f"; done \
+                        | sed -e "s,^$libname$shrext\\\\.,," \
+                        | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+                        | sed 1q ) 2>/dev/null`
+                  if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+                    found_dir="$dir"
+                    found_so="$dir/$libname$shrext.$ver"
+                  fi
+                else
+                  eval library_names=\"$acl_library_names_spec\"
+                  for f in $library_names; do
+                    if test -f "$dir/$f"; then
+                      found_dir="$dir"
+                      found_so="$dir/$f"
+                      break
+                    fi
+                  done
+                fi
               fi
-              if test -f "$additional_libdir/lib$name.la"; then
-                found_la="$additional_libdir/lib$name.la"
+            fi
+            dnl Then look for a static library.
+            if test "X$found_dir" = "X"; then
+              if test -f "$dir/$libname.$acl_libext"; then
+                found_dir="$dir"
+                found_a="$dir/$libname.$acl_libext"
               fi
-            else
-              if test -f "$additional_libdir/lib$name.$libext"; then
-                found_dir="$additional_libdir"
-                found_a="$additional_libdir/lib$name.$libext"
-                if test -f "$additional_libdir/lib$name.la"; then
-                  found_la="$additional_libdir/lib$name.la"
-                fi
+            fi
+            if test "X$found_dir" != "X"; then
+              if test -f "$dir/$libname.la"; then
+                found_la="$dir/$libname.la"
               fi
             fi
           fi
@@ -227,26 +274,44 @@
               case "$x" in
                 -L*)
                   dir=`echo "X$x" | sed -e 's/^X-L//'`
-                  if test -n "$shlibext" \
-                     && { test -f "$dir/lib$name.$shlibext" \
-                          || { test "$shlibext" = dll \
-                               && test -f "$dir/lib$name.dll.a"; }; }; then
-                    found_dir="$dir"
-                    if test -f "$dir/lib$name.$shlibext"; then
-                      found_so="$dir/lib$name.$shlibext"
+                  dnl First look for a shared library.
+                  if test -n "$acl_shlibext"; then
+                    if test -f "$dir/$libname$shrext"; then
+                      found_dir="$dir"
+                      found_so="$dir/$libname$shrext"
                     else
-                      found_so="$dir/lib$name.dll.a"
-                    fi
-                    if test -f "$dir/lib$name.la"; then
-                      found_la="$dir/lib$name.la"
+                      if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+                        ver=`(cd "$dir" && \
+                              for f in "$libname$shrext".*; do echo "$f"; done \
+                              | sed -e "s,^$libname$shrext\\\\.,," \
+                              | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+                              | sed 1q ) 2>/dev/null`
+                        if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+                          found_dir="$dir"
+                          found_so="$dir/$libname$shrext.$ver"
+                        fi
+                      else
+                        eval library_names=\"$acl_library_names_spec\"
+                        for f in $library_names; do
+                          if test -f "$dir/$f"; then
+                            found_dir="$dir"
+                            found_so="$dir/$f"
+                            break
+                          fi
+                        done
+                      fi
                     fi
-                  else
-                    if test -f "$dir/lib$name.$libext"; then
+                  fi
+                  dnl Then look for a static library.
+                  if test "X$found_dir" = "X"; then
+                    if test -f "$dir/$libname.$acl_libext"; then
                       found_dir="$dir"
-                      found_a="$dir/lib$name.$libext"
-                      if test -f "$dir/lib$name.la"; then
-                        found_la="$dir/lib$name.la"
-                      fi
+                      found_a="$dir/$libname.$acl_libext"
+                    fi
+                  fi
+                  if test "X$found_dir" != "X"; then
+                    if test -f "$dir/$libname.la"; then
+                      found_la="$dir/$libname.la"
                     fi
                   fi
                   ;;
@@ -282,12 +347,12 @@
                   ltrpathdirs="$ltrpathdirs $found_dir"
                 fi
                 dnl The hardcoding into $LIBNAME is system dependent.
-                if test "$hardcode_direct" = yes; then
+                if test "$acl_hardcode_direct" = yes; then
                   dnl Using DIR/libNAME.so during linking hardcodes DIR into the
                   dnl resulting binary.
                   LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
                 else
-                  if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
+                  if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
                     dnl Use an explicit option to hardcode DIR into the resulting
                     dnl binary.
                     LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
@@ -318,13 +383,13 @@
                     if test -z "$haveit"; then
                       LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir"
                     fi
-                    if test "$hardcode_minus_L" != no; then
+                    if test "$acl_hardcode_minus_L" != no; then
                       dnl FIXME: Not sure whether we should use
                       dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
                       dnl here.
                       LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
                     else
-                      dnl We cannot use $hardcode_runpath_var and LD_RUN_PATH
+                      dnl We cannot use $acl_hardcode_runpath_var and LD_RUN_PATH
                       dnl here, because this doesn't fit in flags passed to the
                       dnl compiler. So give up. No hardcoding. This affects only
                       dnl very old systems.
@@ -512,18 +577,18 @@
     done
   done
   if test "X$rpathdirs" != "X"; then
-    if test -n "$hardcode_libdir_separator"; then
+    if test -n "$acl_hardcode_libdir_separator"; then
       dnl Weird platform: only the last -rpath option counts, the user must
       dnl pass all path elements in one option. We can arrange that for a
       dnl single library, but not when more than one $LIBNAMEs are used.
       alldirs=
       for found_dir in $rpathdirs; do
-        alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
+        alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
       done
-      dnl Note: hardcode_libdir_flag_spec uses $libdir and $wl.
+      dnl Note: acl_hardcode_libdir_flag_spec uses $libdir and $wl.
       acl_save_libdir="$libdir"
       libdir="$alldirs"
-      eval flag=\"$hardcode_libdir_flag_spec\"
+      eval flag=\"$acl_hardcode_libdir_flag_spec\"
       libdir="$acl_save_libdir"
       LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
     else
@@ -531,7 +596,7 @@
       for found_dir in $rpathdirs; do
         acl_save_libdir="$libdir"
         libdir="$found_dir"
-        eval flag=\"$hardcode_libdir_flag_spec\"
+        eval flag=\"$acl_hardcode_libdir_flag_spec\"
         libdir="$acl_save_libdir"
         LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
       done
@@ -642,3 +707,79 @@
   fi
   AC_SUBST([$1])
 ])
+
+dnl For those cases where a variable contains several -L and -l options
+dnl referring to unknown libraries and directories, this macro determines the
+dnl necessary additional linker options for the runtime path.
+dnl AC_LIB_LINKFLAGS_FROM_LIBS([LDADDVAR], [LIBSVALUE], [USE-LIBTOOL])
+dnl sets LDADDVAR to linker options needed together with LIBSVALUE.
+dnl If USE-LIBTOOL evaluates to non-empty, linking with libtool is assumed,
+dnl otherwise linking without libtool is assumed.
+AC_DEFUN([AC_LIB_LINKFLAGS_FROM_LIBS],
+[
+  AC_REQUIRE([AC_LIB_RPATH])
+  AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
+  $1=
+  if test "$enable_rpath" != no; then
+    if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
+      dnl Use an explicit option to hardcode directories into the resulting
+      dnl binary.
+      rpathdirs=
+      next=
+      for opt in $2; do
+        if test -n "$next"; then
+          dir="$next"
+          dnl No need to hardcode the standard /usr/lib.
+          if test "X$dir" != "X/usr/$acl_libdirstem"; then
+            rpathdirs="$rpathdirs $dir"
+          fi
+          next=
+        else
+          case $opt in
+            -L) next=yes ;;
+            -L*) dir=`echo "X$opt" | sed -e 's,^X-L,,'`
+                 dnl No need to hardcode the standard /usr/lib.
+                 if test "X$dir" != "X/usr/$acl_libdirstem"; then
+                   rpathdirs="$rpathdirs $dir"
+                 fi
+                 next= ;;
+            *) next= ;;
+          esac
+        fi
+      done
+      if test "X$rpathdirs" != "X"; then
+        if test -n ""$3""; then
+          dnl libtool is used for linking. Use -R options.
+          for dir in $rpathdirs; do
+            $1="${$1}${$1:+ }-R$dir"
+          done
+        else
+          dnl The linker is used for linking directly.
+          if test -n "$acl_hardcode_libdir_separator"; then
+            dnl Weird platform: only the last -rpath option counts, the user
+            dnl must pass all path elements in one option.
+            alldirs=
+            for dir in $rpathdirs; do
+              alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$dir"
+            done
+            acl_save_libdir="$libdir"
+            libdir="$alldirs"
+            eval flag=\"$acl_hardcode_libdir_flag_spec\"
+            libdir="$acl_save_libdir"
+            $1="$flag"
+          else
+            dnl The -rpath options are cumulative.
+            for dir in $rpathdirs; do
+              acl_save_libdir="$libdir"
+              libdir="$dir"
+              eval flag=\"$acl_hardcode_libdir_flag_spec\"
+              libdir="$acl_save_libdir"
+              $1="${$1}${$1:+ }$flag"
+            done
+          fi
+        fi
+      fi
+    fi
+  fi
+  AC_SUBST([$1])
+])
Index: gettext-0.16.1/autoconf-lib-link/config.rpath
===================================================================
--- gettext-0.16.1.orig/autoconf-lib-link/config.rpath	2006-11-27 09:01:58.000000000 -0800
+++ gettext-0.16.1/autoconf-lib-link/config.rpath	2011-03-17 00:33:23.336539490 -0700
@@ -2,7 +2,7 @@
 # Output a system dependent set of variables, describing how to set the
 # run time search path of shared libraries in an executable.
 #
-#   Copyright 1996-2006 Free Software Foundation, Inc.
+#   Copyright 1996-2007 Free Software Foundation, Inc.
 #   Taken from GNU libtool, 2001
 #   Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
 #
@@ -47,6 +47,18 @@
 done
 cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'`
 
+# Code taken from libtool.m4's _LT_CC_BASENAME.
+
+for cc_temp in $CC""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'`
+
 # Code taken from libtool.m4's AC_LIBTOOL_PROG_COMPILER_PIC.
 
 wl=
@@ -64,7 +76,14 @@
           ;;
       esac
       ;;
-    mingw* | pw32* | os2*)
+    darwin*)
+      case $cc_basename in
+        xlc*)
+          wl='-Wl,'
+          ;;
+      esac
+      ;;
+    mingw* | cygwin* | pw32* | os2*)
       ;;
     hpux9* | hpux10* | hpux11*)
       wl='-Wl,'
@@ -74,7 +93,7 @@
       ;;
     newsos6)
       ;;
-    linux*)
+    linux* | k*bsd*-gnu)
       case $cc_basename in
         icc* | ecc*)
           wl='-Wl,'
@@ -100,7 +119,7 @@
     osf3* | osf4* | osf5*)
       wl='-Wl,'
       ;;
-    sco3.2v5*)
+    rdos*)
       ;;
     solaris*)
       wl='-Wl,'
@@ -108,11 +127,14 @@
     sunos4*)
       wl='-Qoption ld '
       ;;
-    sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+    sysv4 | sysv4.2uw2* | sysv4.3*)
       wl='-Wl,'
       ;;
     sysv4*MP*)
       ;;
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      wl='-Wl,'
+      ;;
     unicos*)
       wl='-Wl,'
       ;;
@@ -141,6 +163,10 @@
     # we just hope/assume this is gcc and not c89 (= MSVC++)
     with_gnu_ld=yes
     ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
   openbsd*)
     with_gnu_ld=no
     ;;
@@ -189,11 +215,11 @@
         ld_shlibs=no
       fi
       ;;
-    interix3*)
+    interix[3-9]*)
       hardcode_direct=no
       hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
       ;;
-    linux*)
+    gnu* | linux* | k*bsd*-gnu)
       if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
         :
       else
@@ -280,7 +306,7 @@
             strings "$collect2name" | grep resolve_lib_name >/dev/null
           then
             # We have reworked collect2
-            hardcode_direct=yes
+            :
           else
             # We have old collect2
             hardcode_direct=unsupported
@@ -359,7 +385,7 @@
       hardcode_direct=yes
       hardcode_minus_L=yes
       ;;
-    freebsd* | kfreebsd*-gnu | dragonfly*)
+    freebsd* | dragonfly*)
       hardcode_libdir_flag_spec='-R$libdir'
       hardcode_direct=yes
       ;;
@@ -412,18 +438,22 @@
       hardcode_libdir_separator=:
       ;;
     openbsd*)
-      hardcode_direct=yes
-      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-        hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+      if test -f /usr/libexec/ld.so; then
+        hardcode_direct=yes
+        if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+          hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+        else
+          case "$host_os" in
+            openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+              hardcode_libdir_flag_spec='-R$libdir'
+              ;;
+            *)
+              hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+              ;;
+          esac
+        fi
       else
-        case "$host_os" in
-          openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-            hardcode_libdir_flag_spec='-R$libdir'
-            ;;
-          *)
-            hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-            ;;
-        esac
+        ld_shlibs=no
       fi
       ;;
     os2*)
@@ -471,7 +501,7 @@
         ld_shlibs=yes
       fi
       ;;
-    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*)
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* |sco3.2v5.0.[024]*)
       ;;
     sysv5* | sco3.2v5* | sco5v6*)
       hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
@@ -488,33 +518,51 @@
 
 # Check dynamic linker characteristics
 # Code taken from libtool.m4's AC_LIBTOOL_SYS_DYNAMIC_LINKER.
+# Unlike libtool.m4, here we don't care about _all_ names of the library, but
+# only about the one the linker finds when passed -lNAME. This is the last
+# element of library_names_spec in libtool.m4, or possibly two of them if the
+# linker has special search rules.
+library_names_spec=      # the last element of library_names_spec in libtool.m4
 libname_spec='lib$name'
 case "$host_os" in
   aix3*)
+    library_names_spec='$libname.a'
     ;;
   aix4* | aix5*)
+    library_names_spec='$libname$shrext'
     ;;
   amigaos*)
+    library_names_spec='$libname.a'
     ;;
   beos*)
+    library_names_spec='$libname$shrext'
     ;;
   bsdi[45]*)
+    library_names_spec='$libname$shrext'
     ;;
   cygwin* | mingw* | pw32*)
     shrext=.dll
+    library_names_spec='$libname.dll.a $libname.lib'
     ;;
   darwin* | rhapsody*)
     shrext=.dylib
+    library_names_spec='$libname$shrext'
     ;;
   dgux*)
+    library_names_spec='$libname$shrext'
     ;;
   freebsd1*)
     ;;
-  kfreebsd*-gnu)
-    ;;
   freebsd* | dragonfly*)
+    case "$host_os" in
+      freebsd[123]*)
+        library_names_spec='$libname$shrext$versuffix' ;;
+      *)
+        library_names_spec='$libname$shrext' ;;
+    esac
     ;;
   gnu*)
+    library_names_spec='$libname$shrext'
     ;;
   hpux9* | hpux10* | hpux11*)
     case $host_cpu in
@@ -528,10 +576,13 @@
         shrext=.sl
         ;;
     esac
+    library_names_spec='$libname$shrext'
     ;;
-  interix3*)
+  interix[3-9]*)
+    library_names_spec='$libname$shrext'
     ;;
   irix5* | irix6* | nonstopux*)
+    library_names_spec='$libname$shrext'
     case "$host_os" in
       irix5* | nonstopux*)
         libsuff= shlibsuff=
@@ -548,33 +599,46 @@
     ;;
   linux*oldld* | linux*aout* | linux*coff*)
     ;;
-  linux*)
+  linux* | k*bsd*-gnu)
+    library_names_spec='$libname$shrext'
     ;;
   knetbsd*-gnu)
+    library_names_spec='$libname$shrext'
     ;;
   netbsd*)
+    library_names_spec='$libname$shrext'
     ;;
   newsos6)
+    library_names_spec='$libname$shrext'
     ;;
   nto-qnx*)
+    library_names_spec='$libname$shrext'
     ;;
   openbsd*)
+    library_names_spec='$libname$shrext$versuffix'
     ;;
   os2*)
     libname_spec='$name'
     shrext=.dll
+    library_names_spec='$libname.a'
     ;;
   osf3* | osf4* | osf5*)
+    library_names_spec='$libname$shrext'
     ;;
   solaris*)
+    library_names_spec='$libname$shrext'
     ;;
   sunos4*)
+    library_names_spec='$libname$shrext$versuffix'
     ;;
   sysv4 | sysv4.3*)
+    library_names_spec='$libname$shrext'
     ;;
   sysv4*MP*)
+    library_names_spec='$libname$shrext'
     ;;
   sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+    library_names_spec='$libname$shrext'
     ;;
   uts4*)
     ;;
@@ -583,6 +647,8 @@
 sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
 escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"`
 shlibext=`echo "$shrext" | sed -e 's,^\.,,'`
+escaped_libname_spec=`echo "X$libname_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
+escaped_library_names_spec=`echo "X$library_names_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
 escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
 
 LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <<EOF
@@ -596,6 +662,12 @@
 # Shared library suffix (normally "so").
 shlibext="$shlibext"
 
+# Format of library name prefix.
+libname_spec="$escaped_libname_spec"
+
+# Library names that the linker finds when passed -lNAME.
+library_names_spec="$escaped_library_names_spec"
+
 # Flag to hardcode \$libdir into a binary during linking.
 # This must work even if \$libdir does not exist.
 hardcode_libdir_flag_spec="$escaped_hardcode_libdir_flag_spec"