diff --git a/meta-openembedded/meta-networking/dynamic-layers/meta-python/recipes-connectivity/crda/crda_3.18.bb b/meta-openembedded/meta-networking/dynamic-layers/meta-python/recipes-connectivity/crda/crda_3.18.bb
index 9abfd61..a616557 100644
--- a/meta-openembedded/meta-networking/dynamic-layers/meta-python/recipes-connectivity/crda/crda_3.18.bb
+++ b/meta-openembedded/meta-networking/dynamic-layers/meta-python/recipes-connectivity/crda/crda_3.18.bb
@@ -36,4 +36,4 @@
     oe_runmake SBINDIR=${sbindir}/ install
 }
 
-RDEPENDS:${PN} = "udev wireless-regdb-static"
+RDEPENDS:${PN} = "udev wireless-regdb"
diff --git a/meta-openembedded/meta-networking/dynamic-layers/meta-python/recipes-connectivity/firewalld/files/run-ptest b/meta-openembedded/meta-networking/dynamic-layers/meta-python/recipes-connectivity/firewalld/files/run-ptest
new file mode 100644
index 0000000..9d3ec79
--- /dev/null
+++ b/meta-openembedded/meta-networking/dynamic-layers/meta-python/recipes-connectivity/firewalld/files/run-ptest
@@ -0,0 +1,21 @@
+#!/bin/sh
+
+ret_val=0
+
+# Check if all the kernel modules are available
+FIREWALLD_KERNEL_MODULES="@@FIREWALLD_KERNEL_MODULES@@"
+for m in $FIREWALLD_KERNEL_MODULES; do
+    if modprobe $m; then
+        echo "PASS: loading $m"
+    else
+        echo "FAIL: loading $m"
+        ret_val=1
+    fi
+done
+
+# Run the test suite from firewalld
+# Failing testsuites: 203 226 241 250 270 280 281 282 285 286
+# Problem icmpv6 compared against ipv6-icmptype?
+/usr/share/firewalld/testsuite/testsuite -C /tmp -A || ret_val=1
+
+exit $ret_val
diff --git a/meta-openembedded/meta-networking/dynamic-layers/meta-python/recipes-connectivity/firewalld/firewalld_0.9.4.bb b/meta-openembedded/meta-networking/dynamic-layers/meta-python/recipes-connectivity/firewalld/firewalld_0.9.4.bb
deleted file mode 100644
index 1dea339..0000000
--- a/meta-openembedded/meta-networking/dynamic-layers/meta-python/recipes-connectivity/firewalld/firewalld_0.9.4.bb
+++ /dev/null
@@ -1,92 +0,0 @@
-SUMMARY = "Dynamic firewall daemon with a D-Bus interface"
-HOMEPAGE = "https://firewalld.org/"
-BUGTRACKER = "https://github.com/firewalld/firewalld/issues"
-UPSTREAM_CHECK_URI = "https://github.com/firewalld/firewalld/releases"
-LICENSE = "GPL-2.0-or-later"
-LIC_FILES_CHKSUM = "file://COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263"
-
-SRC_URI = "https://github.com/${BPN}/${BPN}/releases/download/v${PV}/${BP}.tar.gz \
-           file://firewalld.init \
-"
-SRC_URI[sha256sum] = "52c5e3d5b1e2efc0e86c22b2bc1f7fd80908cc2d8130157dc2a3517a59b0a760"
-
-# glib-2.0-native is needed for GSETTINGS_RULES autoconf macro from gsettings.m4
-DEPENDS = "intltool-native glib-2.0-native nftables"
-
-inherit gettext autotools bash-completion pkgconfig python3native gsettings systemd update-rc.d
-
-PACKAGECONFIG ??= "${@bb.utils.filter('DISTRO_FEATURES', 'systemd', d)}"
-PACKAGECONFIG[systemd] = "--with-systemd-unitdir=${systemd_system_unitdir},--disable-systemd"
-PACKAGECONFIG[docs] = "--with-xml-catalog=${STAGING_ETCDIR_NATIVE}/xml/catalog,--disable-docs,libxslt-native docbook-xsl-stylesheets-native"
-
-PACKAGES += "${PN}-zsh-completion"
-
-# iptables, ip6tables, ebtables, and ipset *should* be unnecessary
-# when the nftables backend is available, because nftables supersedes all of them.
-# However we still need iptables and ip6tables to be available otherwise any
-# application relying on "direct passthrough" rules (such as docker) will break.
-# /etc/sysconfig/firewalld is a Red Hat-ism, only referenced by
-# the Red Hat-specific init script which we aren't using, so we disable that.
-EXTRA_OECONF = "\
-    --without-ipset \
-    --with-iptables=${sbindir}/iptables \
-    --with-iptables-restore=${sbindir}/iptables-restore \
-    --with-ip6tables=${sbindir}/ip6tables \
-    --with-ip6tables-restore=${sbindir}/ip6tables-restore \
-    --without-ebtables \
-    --without-ebtables-restore \
-    --disable-sysconfig \
-"
-
-INITSCRIPT_NAME = "firewalld"
-SYSTEMD_SERVICE:${PN} = "firewalld.service"
-
-do_install:append() {
-    if ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'true', 'false', d)}; then
-        :
-    else
-        # firewalld ships an init script but it contains Red Hat-isms, replace it with our own
-        rm -rf ${D}${sysconfdir}/rc.d/
-        install -d ${D}${sysconfdir}/init.d
-        install -m0755 ${WORKDIR}/firewalld.init ${D}${sysconfdir}/init.d/firewalld
-    fi
-
-    # We ran ./configure with PYTHON pointed at the binary inside $STAGING_BINDIR_NATIVE
-    # so now we need to fix up any references to point at the proper path in the image.
-    # This hack is also in distutils.bbclass, but firewalld doesn't use distutils/setuptools.
-    if [ ${PN} != "${BPN}-native" ]; then
-        sed -i -e s:${STAGING_BINDIR_NATIVE}/python3-native/python3:${bindir}/python3:g \
-            ${D}${bindir}/* ${D}${sbindir}/* ${D}${sysconfdir}/firewalld/*.xml
-    fi
-    sed -i -e s:${STAGING_BINDIR_NATIVE}:${bindir}:g \
-        ${D}${bindir}/* ${D}${sbindir}/* ${D}${sysconfdir}/firewalld/*.xml
-
-    # This file contains Red Hat-isms. Modules get loaded without it.
-    rm -f ${D}${sysconfdir}/modprobe.d/firewalld-sysctls.conf
-}
-
-FILES:${PN} += "\
-    ${PYTHON_SITEPACKAGES_DIR}/firewall \
-    ${nonarch_libdir}/firewalld \
-    ${datadir}/dbus-1 \
-    ${datadir}/polkit-1 \
-    ${datadir}/metainfo \
-"
-FILES:${PN}-zsh-completion = "${datadir}/zsh/site-functions"
-
-RDEPENDS:${PN} = "\
-    nftables-python \
-    iptables \
-    python3-core \
-    python3-io \
-    python3-fcntl \
-    python3-shell \
-    python3-syslog \
-    python3-xml \
-    python3-dbus \
-    python3-slip-dbus \
-    python3-decorator \
-    python3-pygobject \
-    python3-json \
-    python3-ctypes \
-"
diff --git a/meta-openembedded/meta-networking/dynamic-layers/meta-python/recipes-connectivity/firewalld/firewalld_1.2.0.bb b/meta-openembedded/meta-networking/dynamic-layers/meta-python/recipes-connectivity/firewalld/firewalld_1.2.0.bb
new file mode 100644
index 0000000..987cc64
--- /dev/null
+++ b/meta-openembedded/meta-networking/dynamic-layers/meta-python/recipes-connectivity/firewalld/firewalld_1.2.0.bb
@@ -0,0 +1,310 @@
+SUMMARY = "Dynamic firewall daemon with a D-Bus interface"
+HOMEPAGE = "https://firewalld.org/"
+BUGTRACKER = "https://github.com/firewalld/firewalld/issues"
+UPSTREAM_CHECK_URI = "https://github.com/firewalld/firewalld/releases"
+LICENSE = "GPL-2.0-or-later"
+LIC_FILES_CHKSUM = "file://COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263"
+
+SRC_URI = "\
+    https://github.com/${BPN}/${BPN}/releases/download/v${PV}/${BP}.tar.gz \
+    file://firewalld.init \
+    file://run-ptest \
+"
+SRC_URI[sha256sum] = "28fd90e88bda0dfd460f370f353474811b2e295d7eb27f0d7d18ffa3d786eeb7"
+
+# glib-2.0-native is needed for GSETTINGS_RULES autoconf macro from gsettings.m4
+DEPENDS = "intltool-native glib-2.0-native nftables"
+
+inherit gettext autotools-brokensep bash-completion pkgconfig python3native python3-dir gsettings systemd update-rc.d ptest
+
+PACKAGECONFIG ??= "${@bb.utils.filter('DISTRO_FEATURES', 'systemd', d)}"
+PACKAGECONFIG[systemd] = "--with-systemd-unitdir=${systemd_system_unitdir},--disable-systemd"
+PACKAGECONFIG[docs] = "--with-xml-catalog=${STAGING_ETCDIR_NATIVE}/xml/catalog,--disable-docs,libxslt-native docbook-xsl-stylesheets-native"
+PACKAGECONFIG[ipset] = "--with-ipset=${sbindir}/ipset,--without-ipset,,ipset"
+PACKAGECONFIG[ebtables] = "--with-ebtables=${base_sbindir}/ebtables --with-ebtables-restore=${sbindir}/ebtables-legacy-restore,--without-ebtables --without-ebtables-restore,,ebtables"
+
+# Default logging configuration: mixed syslog file console
+FIREWALLD_DEFAULT_LOG_TARGET ??= "syslog"
+
+# The UIs are not yet tested and the dependencies are probably not quite correct yet.
+# Splitting into separate packages is beneficial so that no dead code is transferred
+# to the target device.
+# Without enabling qt5, the firewalld-config package is not usable.
+# Without enabling qt5 and gtk, the firewalld-applet package is not usable.
+PACKAGECONFIG[qt5] = ""
+PACKAGECONFIG[gtk] = ""
+
+PACKAGES =+ "python3-firewall ${PN}-applet ${PN}-config ${PN}-offline-cmd ${PN}-zsh-completion ${PN}-log-rotate"
+
+# iptables, ip6tables, ebtables, and ipset *should* be unnecessary
+# when the nftables backend is available, because nftables supersedes all of them.
+# However we still need iptables and ip6tables to be available otherwise any
+# application relying on "direct passthrough" rules (such as docker) will break.
+# /etc/sysconfig/firewalld is a Red Hat-ism, only referenced by
+# the Red Hat-specific init script which we aren't using, so we disable that.
+EXTRA_OECONF = "\
+    --with-iptables=${sbindir}/iptables \
+    --with-iptables-restore=${sbindir}/iptables-restore \
+    --with-ip6tables=${sbindir}/ip6tables \
+    --with-ip6tables-restore=${sbindir}/ip6tables-restore \
+    --disable-sysconfig \
+"
+
+INITSCRIPT_NAME = "firewalld"
+SYSTEMD_SERVICE:${PN} = "firewalld.service"
+
+# kernel modules loaded after ptest execution (linux-yocto 5.15)
+FIREWALLD_KERNEL_MODULES ?= "\
+    xt_tcpudp \
+    xt_TCPMSS \
+    xt_set \
+    xt_sctp \
+    xt_REDIRECT \
+    xt_pkttype \
+    xt_NFLOG \
+    xt_nat \
+    xt_MASQUERADE \
+    xt_mark \
+    xt_mac \
+    xt_LOG \
+    xt_limit \
+    xt_dccp \
+    xt_CT \
+    xt_conntrack \
+    xt_CHECKSUM \
+    nft_redir \
+    nft_objref \
+    nft_nat \
+    nft_masq \
+    nft_log \
+    nfnetlink_log \
+    nf_nat_tftp \
+    nf_nat_sip \
+    nf_nat_ftp \
+    nf_log_syslog \
+    nf_conntrack_tftp \
+    nf_conntrack_sip \
+    nf_conntrack_netbios_ns \
+    nf_conntrack_ftp \
+    nf_conntrack_broadcast \
+    ipt_REJECT \
+    ip6t_rpfilter \
+    ip6t_REJECT \
+    ip_set_hash_netport \
+    ip_set_hash_netnet \
+    ip_set_hash_netiface \
+    ip_set_hash_net \
+    ip_set_hash_mac \
+    ip_set_hash_ipportnet \
+    ip_set_hash_ipport \
+    ip_set_hash_ipmark \
+    ip_set_hash_ip \
+    ebt_ip6 \
+    nft_fib_inet \
+    nft_fib_ipv4 \
+    nft_fib_ipv6 \
+    nft_fib \
+    nft_reject_inet \
+    nf_reject_ipv4 \
+    nf_reject_ipv6 \
+    nft_reject \
+    nft_ct \
+    nft_chain_nat \
+    ebtable_nat \
+    ebtable_broute \
+    ip6table_nat \
+    ip6table_mangle \
+    ip6table_raw \
+    ip6table_security \
+    iptable_nat \
+    nf_nat \
+    nf_conntrack \
+    nf_defrag_ipv6 \
+    nf_defrag_ipv4 \
+    iptable_mangle \
+    iptable_raw \
+    iptable_security \
+    ip_set \
+    ebtable_filter \
+    ebtables \
+    ip6table_filter \
+    ip6_tables \
+    iptable_filter \
+    ip_tables \
+    x_tables \
+    sch_fq_codel \
+"
+
+do_configure:prepend() {
+    export DEFAULT_LOG_TARGET=${FIREWALLD_DEFAULT_LOG_TARGET}
+}
+
+do_install:append() {
+    if ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'false', 'true', d)}; then
+        # firewalld ships an init script but it contains Red Hat-isms, replace it with our own
+        rm -rf ${D}${sysconfdir}/rc.d/
+        install -d ${D}${sysconfdir}/init.d
+        install -m0755 ${WORKDIR}/firewalld.init ${D}${sysconfdir}/init.d/firewalld
+    fi
+
+    if ${@bb.utils.contains('DISTRO_FEATURES', 'polkit', 'false', 'true', d)}; then
+        # Delete polkit profiles if polkit is not available
+        rm -rf ${D}${datadir}/polkit-1
+    fi
+
+    # We ran ./configure with PYTHON pointed at the binary inside $STAGING_BINDIR_NATIVE
+    # so now we need to fix up any references to point at the proper path in the image.
+    # This hack is also in distutils.bbclass, but firewalld doesn't use distutils/setuptools.
+    if [ ${PN} != "${BPN}-native" ]; then
+        sed -i -e s:${STAGING_BINDIR_NATIVE}/python3-native/python3:${bindir}/python3:g \
+            ${D}${bindir}/* ${D}${sbindir}/* ${D}${sysconfdir}/firewalld/*.xml
+    fi
+    sed -i -e s:${STAGING_BINDIR_NATIVE}:${bindir}:g \
+        ${D}${bindir}/* ${D}${sbindir}/* ${D}${sysconfdir}/firewalld/*.xml
+
+    # This file contains Red Hat-isms. Modules get loaded without it.
+    rm -f ${D}${sysconfdir}/modprobe.d/firewalld-sysctls.conf
+}
+
+do_install_ptest:append() {
+    # Add kernel modules to the ptest script
+    if [ ${PTEST_ENABLED} = "1" ]; then
+        sed -i -e 's:@@FIREWALLD_KERNEL_MODULES@@:${FIREWALLD_KERNEL_MODULES}:g' \
+            ${D}${PTEST_PATH}/run-ptest
+    fi
+}
+
+SUMMARY:python3-firewall = "${SUMMARY} (Python3 bindings)"
+FILES:python3-firewall = "\
+    ${PYTHON_SITEPACKAGES_DIR}/firewall/__pycache__/*.py* \
+    ${PYTHON_SITEPACKAGES_DIR}/firewall/*.py* \
+    ${PYTHON_SITEPACKAGES_DIR}/firewall/config/*.py* \
+    ${PYTHON_SITEPACKAGES_DIR}/firewall/config/__pycache__/*.py* \
+    ${PYTHON_SITEPACKAGES_DIR}/firewall/core/*.py* \
+    ${PYTHON_SITEPACKAGES_DIR}/firewall/core/__pycache__/*.py* \
+    ${PYTHON_SITEPACKAGES_DIR}/firewall/core/io/*.py* \
+    ${PYTHON_SITEPACKAGES_DIR}/firewall/core/io/__pycache__/*.py* \
+    ${PYTHON_SITEPACKAGES_DIR}/firewall/server/*.py* \
+    ${PYTHON_SITEPACKAGES_DIR}/firewall/server/__pycache__/*.py* \
+"
+RDEPENDS:python3-firewall = "\
+    python3-dbus \
+    nftables-python \
+    python3-pygobject \
+"
+
+# Do not depend on QT5 layer and GTK deps if not explicitely required.
+FIREWALLD_QT5_RDEPENDS = "\
+    ${PN}-config \
+    hicolor-icon-theme \
+    python3-pyqt5 \
+    python3-pygobject \
+    libnotify \
+    networkmanager \
+"
+FIREWALLD_GTK_RDEPENDS = "\
+    gtk3 \
+"
+
+# A QT5 based UI
+SUMMARY:${PN}-config = "${SUMMARY} (configuration application)"
+FILES:${PN}-config = "\
+    ${bindir}/firewall-config \
+    ${datadir}/firewalld/firewall-config.glade \
+    ${datadir}/firewalld/gtk3_chooserbutton.py* \
+    ${datadir}/firewalld/gtk3_niceexpander.py* \
+    ${datadir}/applications/firewall-config.desktop \
+    ${datadir}/metainfo/firewall-config.appdata.xml \
+    ${datadir}/icons/hicolor/*/apps/firewall-config*.* \
+"
+RDEPENDS:${PN}-config += "\
+    python3-core \
+    python3-ctypes \
+    ${@bb.utils.contains('PACKAGECONFIG', 'qt5', '${FIREWALLD_QT5_RDEPENDS}', '', d)} \
+"
+
+# A GTK3 applet depending on the QT5 firewall-config UI
+SUMMARY:${PN}-applet = "${SUMMARY} (panel applet)"
+FILES:${PN}-applet += "\
+    ${bindir}/firewall-applet \
+    ${sysconfdir}/xdg/autostart/firewall-applet.desktop \
+    ${sysconfdir}/firewall/applet.conf \
+    ${datadir}/icons/hicolor/*/apps/firewall-applet*.* \
+"
+RDEPENDS:${PN}-applet += "\
+    python3-core \
+    python3-ctypes \
+    ${@bb.utils.contains('PACKAGECONFIG', 'qt5', '${FIREWALLD_QT5_RDEPENDS}', '', d)} \
+    ${@bb.utils.contains('PACKAGECONFIG', 'gtk', '${FIREWALLD_GTK_RDEPENDS}', '', d)} \
+"
+
+SUMMARY:${PN}-offline-cmd = "${SUMMARY} (offline configuration utility)"
+FILES:${PN}-offline-cmd += " \
+    ${bindir}/firewall-offline-cmd \
+"
+RDEPENDS:${PN}-offline-cmd += "python3-core"
+
+SUMMARY:${PN}-log-rotate = "${SUMMARY} (log-rotate configuration)"
+FILES:${PN}-log-rotate += "${sysconfdir}/logrotate.d"
+
+# To get allmost all tests passing
+# - Enable PACKAGECONFIG ipset, ebtable
+# - Enough RAM QB_MEM = "-m 8192" (used für fancy ipset tests)
+FILES:${PN}-ptest += "\
+    ${datadir}/firewalld/testsuite \
+"
+RDEPENDS:${PN}-ptest += "\
+    python3-unittest \
+    ${PN}-offline-cmd \
+    procps-ps \
+    iproute2 \
+"
+RDEPENDS:${PN}-ptest:append:libc-glibc = " glibc-utils glibc-localedata-en-us"
+
+FILES:${PN}-zsh-completion = "${datadir}/zsh/site-functions"
+
+FILES:${PN} += "\
+    ${PYTHON_SITEPACKAGES_DIR}/firewall \
+    ${nonarch_libdir}/firewalld \
+    ${datadir}/dbus-1 \
+    ${datadir}/polkit-1 \
+    ${datadir}/metainfo \
+    ${datadir}/glib-2.0/schemas/org.fedoraproject.FirewallConfig.gschema.xml \
+"
+RDEPENDS:${PN} += "\
+    python3-firewall \
+    iptables \
+    python3-core \
+    python3-io \
+    python3-fcntl \
+    python3-syslog \
+    python3-xml \
+    python3-json \
+    python3-ctypes \
+    python3-pprint \
+"
+# If firewalld writes a log file rotation is needed
+RRECOMMENDS:${PN} += "${@bb.utils.contains_any('FIREWALLD_DEFAULT_LOG_TARGET', [ 'mixed', 'file' ], '${PN}-log-rotate', '', d)}"
+
+# Add required kernel modules. With Yocto kernel 5.15 this currently means:
+# - features/nf_tables/nf_tables.scc
+# - features/netfilter/netfilter.scc
+# - cgl/features/audit/audit.scc
+# - cfg/net/ip6_nf.scc
+# - Plus:
+#   - ebtables
+#   - ipset
+#   - CONFIG_IP6_NF_SECURITY=m
+#   - CONFIG_IP6_NF_MATCH_RPFILTER=m
+#   - CONFIG_IP6_NF_TARGET_REJECT=m
+#   - CONFIG_NFT_OBJREF=m
+#   - CONFIG_NFT_FIB=m
+#   - CONFIG_NFT_FIB_INET=m
+#   - CONFIG_NFT_FIB_IPV4=m
+#   - CONFIG_NFT_FIB_IPV6=m
+#   - CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+#   - CONFIG_NETFILTER_XT_SET=m
+def get_kernel_deps(d):
+    kmodules = (d.getVar('FIREWALLD_KERNEL_MODULES') or "").split()
+    return ' '.join([ 'kernel-module-' + mod.replace('_', '-').lower() for mod in kmodules ])
+RRECOMMENDS:${PN} += "${@get_kernel_deps(d)}"