Change to /sys/bus/i2c/devices/... paths.
Per review comments, change device paths to symlinks thought to be more
stable.
(From meta-ibm rev: ad75a64d9b120f9b9ed0453acca1da2bf119e78e)
Signed-off-by: Jim Wright <jlwright@us.ibm.com>
Change-Id: I925dac346368a0a40fa64948ac7f640c33f15019
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
diff --git a/meta-ibm/meta-witherspoon/recipes-phosphor/power/power-sequencer/witherspoon/ucd90160.yaml b/meta-ibm/meta-witherspoon/recipes-phosphor/power/power-sequencer/witherspoon/ucd90160.yaml
index bf373ea..39ee8ed 100644
--- a/meta-ibm/meta-witherspoon/recipes-phosphor/power/power-sequencer/witherspoon/ucd90160.yaml
+++ b/meta-ibm/meta-witherspoon/recipes-phosphor/power/power-sequencer/witherspoon/ucd90160.yaml
@@ -1,7 +1,7 @@
- Device:
index: 0
# Linux sysfs path for this power sequencer (0xC8 8-bit address)
- path: /sys/devices/platform/ahb/ahb:apb/ahb:apb:bus@1e78a000/1e78a400.i2c-bus/i2c-11/11-0064
+ path: /sys/bus/i2c/devices//i2c-11/11-0064
RailNames:
- "5.0VCS"
- "12.0V"
@@ -52,7 +52,7 @@
analysis: none
GPIOAnalysis:
- type: gpuPGOOD
- path: /sys/devices/platform/ahb/ahb:apb/ahb:apb:bus@1e78a000/1e78a400.i2c-bus/i2c-11/11-0060
+ path: /sys/bus/i2c/devices/i2c-11/11-0060
gpio_value: low
error_function: gpuPGOODError
option_flags: none
@@ -77,7 +77,7 @@
callout: /system/chassis/motherboard/gv100card5
- type: gpuOverTemp # Extra analysis function to call for this type
# The PCA9xxx chip device path and address (0xC0 8-bit = 0x60 7-bit)
- path: /sys/devices/platform/ahb/ahb:apb/ahb:apb:bus@1e78a000/1e78a400.i2c-bus/i2c-11/11-0060
+ path: /sys/bus/i2c/devices/i2c-11/11-0060
gpio_value: low # What GPIO value indicates a fault/problem?
error_function: gpuOverTempError
option_flags: shutdownOnFault