witherspoon-128: Initial commit
Create a machine/witherspoon-128.conf file to model a witherspoon
system with 128MB flash chips.
* New kernel device tree (witherspoon-128.dts).
* Bigger read-write filesystem. Remove the default from the
witherspoon layer (not needed as 6MB is the default) so that the
size value can be overwritten by the witherspoon-128.conf.
- To build this machine:
export MACHINE="witherspoon-128"; \
export BB_ENV_EXTRAWHITE="$BB_ENV_EXTRAWHITE MACHINE"; \
bitbake obmc-phosphor-image
Witherspoon-128 is a system based on Witherspoon but with 128MB
flash chips. Create a device tree for this configuration.
Since this system is just a bringup vehicle, the device tree will
be carried as a patch instead of merging it in upstream linux.
(From meta-ibm rev: 903fd3532aaa967ddc7124095304f50cd4c9557c)
Change-Id: If02e8ad32fc2bff336d16c18513f2c238b28c28a
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
diff --git a/meta-ibm/meta-witherspoon/recipes-kernel/linux/linux-aspeed/0001-ARM-dts-Aspeed-Witherspoon-128-Update-BMC-partitioni.patch b/meta-ibm/meta-witherspoon/recipes-kernel/linux/linux-aspeed/0001-ARM-dts-Aspeed-Witherspoon-128-Update-BMC-partitioni.patch
new file mode 100644
index 0000000..547d5f0
--- /dev/null
+++ b/meta-ibm/meta-witherspoon/recipes-kernel/linux/linux-aspeed/0001-ARM-dts-Aspeed-Witherspoon-128-Update-BMC-partitioni.patch
@@ -0,0 +1,748 @@
+From a3007793ae0c53b4a39159c6d69502de832a0914 Mon Sep 17 00:00:00 2001
+From: Adriana Kobylak <anoo@us.ibm.com>
+Date: Thu, 7 Feb 2019 11:23:00 -0600
+Subject: [PATCH] ARM: dts: Aspeed: Witherspoon-128: Update BMC partitioning
+
+Create a Witherspoon-128 dts based off Witherspoon but with 128MB
+BMC flash chips.
+
+Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
+---
+ arch/arm/boot/dts/Makefile | 1 +
+ .../boot/dts/aspeed-bmc-opp-witherspoon-128.dts | 712 +++++++++++++++++++++
+ 2 files changed, 713 insertions(+)
+ create mode 100644 arch/arm/boot/dts/aspeed-bmc-opp-witherspoon-128.dts
+
+diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
+index bd40148..2341358 100644
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -1245,6 +1245,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
+ aspeed-bmc-opp-palmetto.dtb \
+ aspeed-bmc-opp-romulus.dtb \
+ aspeed-bmc-opp-witherspoon.dtb \
++ aspeed-bmc-opp-witherspoon-128.dtb \
+ aspeed-bmc-opp-zaius.dtb \
+ aspeed-bmc-portwell-neptune.dtb \
+ aspeed-bmc-quanta-q71l.dtb
+diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon-128.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon-128.dts
+new file mode 100644
+index 0000000..db34564
+--- /dev/null
++++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon-128.dts
+@@ -0,0 +1,712 @@
++// SPDX-License-Identifier: GPL-2.0+
++/dts-v1/;
++#include "aspeed-g5.dtsi"
++#include <dt-bindings/gpio/aspeed-gpio.h>
++#include <dt-bindings/leds/leds-pca955x.h>
++
++/ {
++ model = "Witherspoon BMC";
++ compatible = "ibm,witherspoon-bmc", "aspeed,ast2500";
++
++ chosen {
++ stdout-path = &uart5;
++ bootargs = "console=ttyS4,115200 earlyprintk";
++ };
++
++ memory@80000000 {
++ reg = <0x80000000 0x20000000>;
++ };
++
++ reserved-memory {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges;
++
++ flash_memory: region@98000000 {
++ no-map;
++ reg = <0x98000000 0x04000000>; /* 64M */
++ };
++
++ gfx_memory: framebuffer {
++ size = <0x01000000>;
++ alignment = <0x01000000>;
++ compatible = "shared-dma-pool";
++ reusable;
++ };
++
++ video_engine_memory: jpegbuffer {
++ size = <0x02000000>; /* 32MM */
++ alignment = <0x01000000>;
++ compatible = "shared-dma-pool";
++ reusable;
++ };
++ };
++
++ gpio-keys {
++ compatible = "gpio-keys";
++
++ air-water {
++ label = "air-water";
++ gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
++ linux,code = <ASPEED_GPIO(B, 5)>;
++ };
++
++ checkstop {
++ label = "checkstop";
++ gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
++ linux,code = <ASPEED_GPIO(J, 2)>;
++ };
++
++ ps0-presence {
++ label = "ps0-presence";
++ gpios = <&gpio ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
++ linux,code = <ASPEED_GPIO(P, 7)>;
++ };
++
++ ps1-presence {
++ label = "ps1-presence";
++ gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>;
++ linux,code = <ASPEED_GPIO(N, 0)>;
++ };
++ };
++
++ iio-hwmon-battery {
++ compatible = "iio-hwmon";
++ io-channels = <&adc 12>;
++ };
++
++ gpio-keys-polled {
++ compatible = "gpio-keys-polled";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ poll-interval = <1000>;
++
++ fan0-presence {
++ label = "fan0-presence";
++ gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
++ linux,code = <4>;
++ };
++
++ fan1-presence {
++ label = "fan1-presence";
++ gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
++ linux,code = <5>;
++ };
++
++ fan2-presence {
++ label = "fan2-presence";
++ gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
++ linux,code = <6>;
++ };
++
++ fan3-presence {
++ label = "fan3-presence";
++ gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
++ linux,code = <7>;
++ };
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ fan0 {
++ retain-state-shutdown;
++ default-state = "keep";
++ gpios = <&pca0 0 GPIO_ACTIVE_LOW>;
++ };
++
++ fan1 {
++ retain-state-shutdown;
++ default-state = "keep";
++ gpios = <&pca0 1 GPIO_ACTIVE_LOW>;
++ };
++
++ fan2 {
++ retain-state-shutdown;
++ default-state = "keep";
++ gpios = <&pca0 2 GPIO_ACTIVE_LOW>;
++ };
++
++ fan3 {
++ retain-state-shutdown;
++ default-state = "keep";
++ gpios = <&pca0 3 GPIO_ACTIVE_LOW>;
++ };
++
++ front-fault {
++ retain-state-shutdown;
++ default-state = "keep";
++ gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
++ };
++
++ front-power {
++ retain-state-shutdown;
++ default-state = "keep";
++ gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
++ };
++
++ front-id {
++ retain-state-shutdown;
++ default-state = "keep";
++ gpios = <&pca0 15 GPIO_ACTIVE_LOW>;
++ };
++
++ rear-fault {
++ gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>;
++ };
++
++ rear-id {
++ gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_LOW>;
++ };
++
++ rear-power {
++ gpios = <&gpio ASPEED_GPIO(N, 3) GPIO_ACTIVE_LOW>;
++ };
++
++ power-button {
++ gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
++ };
++ };
++
++ fsi: gpio-fsi {
++ compatible = "fsi-master-gpio", "fsi-master";
++ #address-cells = <2>;
++ #size-cells = <0>;
++ no-gpio-delays;
++
++ clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
++ data-gpios = <&gpio ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>;
++ mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
++ enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
++ trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
++ };
++
++ iio-hwmon-dps310 {
++ compatible = "iio-hwmon";
++ io-channels = <&dps 0>;
++ };
++
++ iio-hwmon-bmp280 {
++ compatible = "iio-hwmon";
++ io-channels = <&bmp 1>;
++ };
++
++};
++
++&fmc {
++ status = "okay";
++
++ flash@0 {
++ status = "okay";
++ label = "bmc";
++ m25p,fast-read;
++ spi-max-frequency = <100000000>;
++ partitions {
++ #address-cells = < 1 >;
++ #size-cells = < 1 >;
++ compatible = "fixed-partitions";
++ u-boot@0 {
++ reg = < 0 0x60000 >;
++ label = "u-boot";
++ };
++ u-boot-env@60000 {
++ reg = < 0x60000 0x20000 >;
++ label = "u-boot-env";
++ };
++ obmc-ubi@80000 {
++ reg = < 0x80000 0x7F80000>;
++ label = "obmc-ubi";
++ };
++ };
++ };
++
++ flash@1 {
++ status = "okay";
++ label = "alt-bmc";
++ m25p,fast-read;
++ spi-max-frequency = <100000000>;
++ partitions {
++ #address-cells = < 1 >;
++ #size-cells = < 1 >;
++ compatible = "fixed-partitions";
++ u-boot@0 {
++ reg = < 0 0x60000 >;
++ label = "alt-u-boot";
++ };
++ u-boot-env@60000 {
++ reg = < 0x60000 0x20000 >;
++ label = "alt-u-boot-env";
++ };
++ obmc-ubi@80000 {
++ reg = < 0x80000 0x7F80000>;
++ label = "alt-obmc-ubi";
++ };
++ };
++ };
++};
++
++&spi1 {
++ status = "okay";
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_spi1_default>;
++
++ flash@0 {
++ status = "okay";
++ label = "pnor";
++ m25p,fast-read;
++ spi-max-frequency = <100000000>;
++ };
++};
++
++&uart1 {
++ /* Rear RS-232 connector */
++ status = "okay";
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_txd1_default
++ &pinctrl_rxd1_default
++ &pinctrl_nrts1_default
++ &pinctrl_ndtr1_default
++ &pinctrl_ndsr1_default
++ &pinctrl_ncts1_default
++ &pinctrl_ndcd1_default
++ &pinctrl_nri1_default>;
++};
++
++&uart2 {
++ /* APSS */
++ status = "okay";
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
++};
++
++&uart5 {
++ status = "okay";
++};
++
++&lpc_ctrl {
++ status = "okay";
++ memory-region = <&flash_memory>;
++ flash = <&spi1>;
++};
++
++&mbox {
++ status = "okay";
++};
++
++&mac0 {
++ status = "okay";
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_rmii1_default>;
++ use-ncsi;
++};
++
++&i2c2 {
++ status = "okay";
++
++ /* MUX ->
++ * Samtec 1
++ * Samtec 2
++ */
++};
++
++&i2c3 {
++ status = "okay";
++
++ bmp: bmp280@77 {
++ compatible = "bosch,bmp280";
++ reg = <0x77>;
++ #io-channel-cells = <1>;
++ };
++
++ max31785@52 {
++ compatible = "maxim,max31785a";
++ reg = <0x52>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ fan@0 {
++ compatible = "pmbus-fan";
++ reg = <0>;
++ tach-pulses = <2>;
++ maxim,fan-rotor-input = "tach";
++ maxim,fan-pwm-freq = <25000>;
++ maxim,fan-dual-tach;
++ maxim,fan-no-watchdog;
++ maxim,fan-no-fault-ramp;
++ maxim,fan-ramp = <2>;
++ maxim,fan-fault-pin-mon;
++ };
++
++ fan@1 {
++ compatible = "pmbus-fan";
++ reg = <1>;
++ tach-pulses = <2>;
++ maxim,fan-rotor-input = "tach";
++ maxim,fan-pwm-freq = <25000>;
++ maxim,fan-dual-tach;
++ maxim,fan-no-watchdog;
++ maxim,fan-no-fault-ramp;
++ maxim,fan-ramp = <2>;
++ maxim,fan-fault-pin-mon;
++ };
++
++ fan@2 {
++ compatible = "pmbus-fan";
++ reg = <2>;
++ tach-pulses = <2>;
++ maxim,fan-rotor-input = "tach";
++ maxim,fan-pwm-freq = <25000>;
++ maxim,fan-dual-tach;
++ maxim,fan-no-watchdog;
++ maxim,fan-no-fault-ramp;
++ maxim,fan-ramp = <2>;
++ maxim,fan-fault-pin-mon;
++ };
++
++ fan@3 {
++ compatible = "pmbus-fan";
++ reg = <3>;
++ tach-pulses = <2>;
++ maxim,fan-rotor-input = "tach";
++ maxim,fan-pwm-freq = <25000>;
++ maxim,fan-dual-tach;
++ maxim,fan-no-watchdog;
++ maxim,fan-no-fault-ramp;
++ maxim,fan-ramp = <2>;
++ maxim,fan-fault-pin-mon;
++ };
++ };
++
++ dps: dps310@76 {
++ compatible = "infineon,dps310";
++ reg = <0x76>;
++ #io-channel-cells = <0>;
++ };
++
++ pca0: pca9552@60 {
++ compatible = "nxp,pca9552";
++ reg = <0x60>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ gpio-controller;
++ #gpio-cells = <2>;
++
++ gpio@0 {
++ reg = <0>;
++ type = <PCA955X_TYPE_GPIO>;
++ };
++
++ gpio@1 {
++ reg = <1>;
++ type = <PCA955X_TYPE_GPIO>;
++ };
++
++ gpio@2 {
++ reg = <2>;
++ type = <PCA955X_TYPE_GPIO>;
++ };
++
++ gpio@3 {
++ reg = <3>;
++ type = <PCA955X_TYPE_GPIO>;
++ };
++
++ gpio@4 {
++ reg = <4>;
++ type = <PCA955X_TYPE_GPIO>;
++ };
++
++ gpio@5 {
++ reg = <5>;
++ type = <PCA955X_TYPE_GPIO>;
++ };
++
++ gpio@6 {
++ reg = <6>;
++ type = <PCA955X_TYPE_GPIO>;
++ };
++
++ gpio@7 {
++ reg = <7>;
++ type = <PCA955X_TYPE_GPIO>;
++ };
++
++ gpio@8 {
++ reg = <8>;
++ type = <PCA955X_TYPE_GPIO>;
++ };
++
++ gpio@9 {
++ reg = <9>;
++ type = <PCA955X_TYPE_GPIO>;
++ };
++
++ gpio@10 {
++ reg = <10>;
++ type = <PCA955X_TYPE_GPIO>;
++ };
++
++ gpio@11 {
++ reg = <11>;
++ type = <PCA955X_TYPE_GPIO>;
++ };
++
++ gpio@12 {
++ reg = <12>;
++ type = <PCA955X_TYPE_GPIO>;
++ };
++
++ gpio@13 {
++ reg = <13>;
++ type = <PCA955X_TYPE_GPIO>;
++ };
++
++ gpio@14 {
++ reg = <14>;
++ type = <PCA955X_TYPE_GPIO>;
++ };
++
++ gpio@15 {
++ reg = <15>;
++ type = <PCA955X_TYPE_GPIO>;
++ };
++ };
++
++ power-supply@68 {
++ compatible = "ibm,cffps1";
++ reg = <0x68>;
++ };
++
++ power-supply@69 {
++ compatible = "ibm,cffps1";
++ reg = <0x69>;
++ };
++};
++
++&i2c4 {
++ status = "okay";
++
++ tmp423a@4c {
++ compatible = "ti,tmp423";
++ reg = <0x4c>;
++ };
++
++ ir35221@70 {
++ compatible = "infineon,ir35221";
++ reg = <0x70>;
++ };
++
++ ir35221@71 {
++ compatible = "infineon,ir35221";
++ reg = <0x71>;
++ };
++};
++
++
++&i2c5 {
++ status = "okay";
++
++ tmp423a@4c {
++ compatible = "ti,tmp423";
++ reg = <0x4c>;
++ };
++
++ ir35221@70 {
++ compatible = "infineon,ir35221";
++ reg = <0x70>;
++ };
++
++ ir35221@71 {
++ compatible = "infineon,ir35221";
++ reg = <0x71>;
++ };
++};
++
++&i2c9 {
++ status = "okay";
++
++ tmp275@4a {
++ compatible = "ti,tmp275";
++ reg = <0x4a>;
++ };
++};
++
++&i2c10 {
++ /* MUX
++ * -> PCIe Slot 3
++ * -> PCIe Slot 4
++ */
++ status = "okay";
++};
++
++&i2c11 {
++ status = "okay";
++
++ pca9552: pca9552@60 {
++ compatible = "nxp,pca9552";
++ reg = <0x60>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++ gpio-controller;
++ #gpio-cells = <2>;
++
++ gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N",
++ "GPU0_TH_OVERT_N_BUFF", "GPU1_TH_OVERT_N_BUFF",
++ "GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF",
++ "GPU4_TH_OVERT_N_BUFF", "GPU5_TH_OVERT_N_BUFF",
++ "GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF",
++ "GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF",
++ "GPU4_PWR_GOOD_BUFF", "GPU5_PWR_GOOD_BUFF",
++ "12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N";
++
++ gpio@0 {
++ reg = <0>;
++ type = <PCA955X_TYPE_GPIO>;
++ };
++
++ gpio@1 {
++ reg = <1>;
++ type = <PCA955X_TYPE_GPIO>;
++ };
++
++ gpio@2 {
++ reg = <2>;
++ type = <PCA955X_TYPE_GPIO>;
++ };
++
++ gpio@3 {
++ reg = <3>;
++ type = <PCA955X_TYPE_GPIO>;
++ };
++
++ gpio@4 {
++ reg = <4>;
++ type = <PCA955X_TYPE_GPIO>;
++ };
++
++ gpio@5 {
++ reg = <5>;
++ type = <PCA955X_TYPE_GPIO>;
++ };
++
++ gpio@6 {
++ reg = <6>;
++ type = <PCA955X_TYPE_GPIO>;
++ };
++
++ gpio@7 {
++ reg = <7>;
++ type = <PCA955X_TYPE_GPIO>;
++ };
++
++ gpio@8 {
++ reg = <8>;
++ type = <PCA955X_TYPE_GPIO>;
++ };
++
++ gpio@9 {
++ reg = <9>;
++ type = <PCA955X_TYPE_GPIO>;
++ };
++
++ gpio@10 {
++ reg = <10>;
++ type = <PCA955X_TYPE_GPIO>;
++ };
++
++ gpio@11 {
++ reg = <11>;
++ type = <PCA955X_TYPE_GPIO>;
++ };
++
++ gpio@12 {
++ reg = <12>;
++ type = <PCA955X_TYPE_GPIO>;
++ };
++
++ gpio@13 {
++ reg = <13>;
++ type = <PCA955X_TYPE_GPIO>;
++ };
++
++ gpio@14 {
++ reg = <14>;
++ type = <PCA955X_TYPE_GPIO>;
++ };
++
++ gpio@15 {
++ reg = <15>;
++ type = <PCA955X_TYPE_GPIO>;
++ };
++ };
++
++ rtc@32 {
++ compatible = "epson,rx8900";
++ reg = <0x32>;
++ };
++
++ eeprom@51 {
++ compatible = "atmel,24c64";
++ reg = <0x51>;
++ };
++
++ ucd90160@64 {
++ compatible = "ti,ucd90160";
++ reg = <0x64>;
++ };
++};
++
++&i2c12 {
++ status = "okay";
++};
++
++&i2c13 {
++ status = "okay";
++};
++
++&vuart {
++ status = "okay";
++};
++
++&gfx {
++ status = "okay";
++ memory-region = <&gfx_memory>;
++};
++
++&pinctrl {
++ aspeed,external-nodes = <&gfx &lhc>;
++};
++
++&wdt1 {
++ aspeed,reset-type = "none";
++ aspeed,external-signal;
++ aspeed,ext-push-pull;
++ aspeed,ext-active-high;
++
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_wdtrst1_default>;
++};
++
++&wdt2 {
++ aspeed,alt-boot;
++};
++
++&ibt {
++ status = "okay";
++};
++
++&adc {
++ status = "okay";
++};
++
++&vhub {
++ status = "okay";
++};
++
++&video {
++ status = "okay";
++ memory-region = <&video_engine_memory>;
++};
++
++#include "ibm-power9-dual.dtsi"
+--
+1.8.3.1
+
diff --git a/meta-ibm/meta-witherspoon/recipes-kernel/linux/linux-aspeed_%.bbappend b/meta-ibm/meta-witherspoon/recipes-kernel/linux/linux-aspeed_%.bbappend
index 1b09937..e41a430 100644
--- a/meta-ibm/meta-witherspoon/recipes-kernel/linux/linux-aspeed_%.bbappend
+++ b/meta-ibm/meta-witherspoon/recipes-kernel/linux/linux-aspeed_%.bbappend
@@ -1,2 +1,3 @@
FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
SRC_URI += "file://witherspoon.cfg"
+SRC_URI_append_witherspoon-128 = " file://0001-ARM-dts-Aspeed-Witherspoon-128-Update-BMC-partitioni.patch"