aspeed: Add Aspeed SDK recipes for U-boot

Start by copying oe-core recipes-bsp/u-boot/ into the Aspeed BSP.  The
uboot recipes in oe-core master currently point to 2019.07 u-boot and
the Aspeed SDK branch being pointed to by this patch is based on uboot
upstream 2019.04.  There weren't any changes in oe-core going from
2019.04 to 2019.07 so thats OK.

After copying the oe-core recipes, fix up SRC_URI, HOMEPAGE, and a
couple other variables to point at the Aspeed u-boot fork.

The current aspeed-master-v2019.04 tip and evb-ast2600_defconfig will produce
a uboot binary but make returns non-zero:

  CFGCHK  u-boot.cfg
   Error: You must add new CONFIG options using Kconfig
   The following new ad-hoc CONFIG options were detected:
   CONFIG_RAM
   Please add these via Kconfig instead. Find a suitable Kconfig
   file and add a 'config' or 'menuconfig' option.
   make: *** [Makefile:1010: all] Error 1

As such the utility of this recipe is limited until the above issue is
addressed.

The Aspeed SDK is intended to be the basis for Aspeed G6 bringup.

(From meta-aspeed rev: fe03326ee328718a79138062a0db374c0685a9c7)

Change-Id: I266dc10dd8549c024ec7012da5e576a2436d195b
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
diff --git a/meta-aspeed/recipes-bsp/u-boot/u-boot-common-aspeed-sdk_2019.04.inc b/meta-aspeed/recipes-bsp/u-boot/u-boot-common-aspeed-sdk_2019.04.inc
new file mode 100644
index 0000000..91b0d00
--- /dev/null
+++ b/meta-aspeed/recipes-bsp/u-boot/u-boot-common-aspeed-sdk_2019.04.inc
@@ -0,0 +1,18 @@
+HOMEPAGE = "https://github.com/AspeedTech-BMC/u-boot"
+SECTION = "bootloaders"
+DEPENDS += "flex-native bison-native"
+
+LICENSE = "GPLv2+"
+LIC_FILES_CHKSUM = "file://Licenses/README;md5=30503fd321432fc713238f582193b78e"
+PE = "1"
+
+# We use the revision in order to avoid having to fetch it from the
+# repo during parse
+SRCREV = "baa29d5ecc47e6b32a3422c897dcbe30e7209e2b"
+
+UBRANCH = "aspeed-master-v2019.04"
+SRC_URI = "git://github.com/AspeedTech-BMC/u-boot;branch=${UBRANCH};protocol=https"
+
+S = "${WORKDIR}/git"
+
+PV = "v2019.04+git${SRCPV}"