diff --git a/poky/meta/lib/oeqa/manual/bsp-hw.json b/poky/meta/lib/oeqa/manual/bsp-hw.json
index 18cec22..5c5b9b5 100644
--- a/poky/meta/lib/oeqa/manual/bsp-hw.json
+++ b/poky/meta/lib/oeqa/manual/bsp-hw.json
@@ -1,32 +1,6 @@
 [
     {
         "test": {
-            "@alias": "bsps-hw.bsps-hw.rpm_-__install_dependency_package",
-            "author": [
-                {
-                    "email": "alexandru.c.georgescu@intel.com",
-                    "name": "alexandru.c.georgescu@intel.com"
-                }
-            ],
-            "execution": {
-                "1": {
-                    "action": "Get a not previously installed RPM package or build one on local machine, which should have run-time dependency.For example, \"mc\" (Midnight Commander, which is a visual file manager) should depend on \"ncurses-terminfo\".   \n\n$ bitbake mc  \n\n\n",
-                    "expected_results": ""
-                },
-                "2": {
-                    "action": "Copy the package into a system folder (for example /home/root/rpm_packages).  \n\n\n",
-                    "expected_results": ""
-                },
-                "3": {
-                    "action": "Run \"rpm -ivh package_name\" and check the output, for example \"rpm -ivh mc.rpm*\" should report the dependency on \"ncurses-terminfo\".\n\n\n\n",
-                    "expected_results": "3 . rpm command should report message when some RPM installation depends on other packages."
-                }
-            },
-            "summary": "rpm_-__install_dependency_package"
-        }
-    },
-    {
-        "test": {
             "@alias": "bsps-hw.bsps-hw.boot_and_install_from_USB",
             "author": [
                 {
@@ -173,28 +147,6 @@
     },
     {
         "test": {
-            "@alias": "bsps-hw.bsps-hw.reboot_system",
-            "author": [
-                {
-                    "email": "alexandru.c.georgescu@intel.com",
-                    "name": "alexandru.c.georgescu@intel.com"
-                }
-            ],
-            "execution": {
-                "1": {
-                    "action": "boot system",
-                    "expected_results": ""
-                },
-                "2": {
-                    "action": "launch terminal and run \"reboot\"",
-                    "expected_results": "System can reboot successfully . "
-                }
-            },
-            "summary": "reboot_system"
-        }
-    },
-    {
-        "test": {
             "@alias": "bsps-hw.bsps-hw.switch_among_multi_applications_and_desktop",
             "author": [
                 {
@@ -225,114 +177,6 @@
     },
     {
         "test": {
-            "@alias": "bsps-hw.bsps-hw.USB_-_mount",
-            "author": [
-                {
-                    "email": "alexandru.c.georgescu@intel.com",
-                    "name": "alexandru.c.georgescu@intel.com"
-                }
-            ],
-            "execution": {
-                "1": {
-                    "action": "Boot system \n\n",
-                    "expected_results": ""
-                },
-                "2": {
-                    "action": "Plug USB stick, it should be mount in  /run/media/sd(x) If X-window system does not start and show USB device, then use the terminal to mount it, following the next steps: \na. Locate the usb stick (usually it is on /dev/sdb) \nb. Create a directory with \"mkdir stick\"  (so you will have such a path as: /home/root/stick). \nc. Run the command  \"mount  /dev/sdb  /home/root/stick\" to mount  USB device on it. \n\n",
-                    "expected_results": "USB device should be mounted in  /run/media/sd(x)  \nor in  /home/root/stick  \n\n"
-                },
-                "3": {
-                    "action": "Then you can access USB stick (/home/root/stick) via Terminal or GUI  and try various commands and actions like \"cp\", \"mv\", \"touch\" and \"rm\".  Type \"dmesg\" command and check for recent mounted devices.",
-                    "expected_results": "Basic commands work properly. The system sends a notification in \"dmesg\" command, showing that the USB stick is accessible and the device is mounted ."
-                }
-            },
-            "summary": "USB_-_mount"
-        }
-    },
-    {
-        "test": {
-            "@alias": "bsps-hw.bsps-hw.USB_-_read_files",
-            "author": [
-                {
-                    "email": "alexandru.c.georgescu@intel.com",
-                    "name": "alexandru.c.georgescu@intel.com"
-                }
-            ],
-            "execution": {
-                "1": {
-                    "action": "boot system",
-                    "expected_results": "view/copy successfully"
-                },
-                "2": {
-                    "action": "plug usb stick",
-                    "expected_results": ""
-                },
-                "3": {
-                    "action": "view files in usb by file browser",
-                    "expected_results": ""
-                },
-                "4": {
-                    "action": "copy some files from usb to local hardware",
-                    "expected_results": ""
-                }
-            },
-            "summary": "USB_-_read_files"
-        }
-    },
-    {
-        "test": {
-            "@alias": "bsps-hw.bsps-hw.USB_-_umount",
-            "author": [
-                {
-                    "email": "alexandru.c.georgescu@intel.com",
-                    "name": "alexandru.c.georgescu@intel.com"
-                }
-            ],
-            "execution": {
-                "1": {
-                    "action": "boot system",
-                    "expected_results": "usb directory in file browser automatically missed"
-                },
-                "2": {
-                    "action": "plug usb stick",
-                    "expected_results": ""
-                },
-                "3": {
-                    "action": "view files in usb by file browser \n4.unplug usb",
-                    "expected_results": ""
-                }
-            },
-            "summary": "USB_-_umount"
-        }
-    },
-    {
-        "test": {
-            "@alias": "bsps-hw.bsps-hw.USB_-_write_files",
-            "author": [
-                {
-                    "email": "alexandru.c.georgescu@intel.com",
-                    "name": "alexandru.c.georgescu@intel.com"
-                }
-            ],
-            "execution": {
-                "1": {
-                    "action": "boot system",
-                    "expected_results": "create/copy successfully"
-                },
-                "2": {
-                    "action": "plug usb stick",
-                    "expected_results": ""
-                },
-                "3": {
-                    "action": "create files in usb \n4.copy some files from local hardware to usb",
-                    "expected_results": ""
-                }
-            },
-            "summary": "USB_-_write_files"
-        }
-    },
-    {
-        "test": {
             "@alias": "bsps-hw.bsps-hw.ethernet_static_ip_set_in_connman",
             "author": [
                 {
@@ -613,136 +457,6 @@
     },
     {
         "test": {
-            "@alias": "bsps-hw.bsps-hw.check_bash_in_image",
-            "author": [
-                {
-                    "email": "alexandru.c.georgescu@intel.com",
-                    "name": "alexandru.c.georgescu@intel.com"
-                }
-            ],
-            "execution": {
-                "1": {
-                    "action": "After system is up, check if bash command exists with command \"which bash\"",
-                    "expected_results": "bash command should exist in image giving something as below  \"/bin/bash\""
-                }
-            },
-            "summary": "check_bash_in_image"
-        }
-    },
-    {
-        "test": {
-            "@alias": "bsps-hw.bsps-hw.MicroSD_-__mount",
-            "author": [
-                {
-                    "email": "alexandru.c.georgescu@intel.com",
-                    "name": "alexandru.c.georgescu@intel.com"
-                }
-            ],
-            "execution": {
-                "1": {
-                    "action": "boot system",
-                    "expected_results": "system notify that MicroSDis accessible"
-                },
-                "2": {
-                    "action": "plug MicroSD card",
-                    "expected_results": ""
-                }
-            },
-            "summary": "MicroSD_-__mount"
-        }
-    },
-    {
-        "test": {
-            "@alias": "bsps-hw.bsps-hw.MicroSD_-__read_files",
-            "author": [
-                {
-                    "email": "alexandru.c.georgescu@intel.com",
-                    "name": "alexandru.c.georgescu@intel.com"
-                }
-            ],
-            "execution": {
-                "1": {
-                    "action": "boot system",
-                    "expected_results": "view/copy successfully"
-                },
-                "2": {
-                    "action": "plug MicroSD card",
-                    "expected_results": ""
-                },
-                "3": {
-                    "action": "view files inMicroSD by file browser",
-                    "expected_results": ""
-                },
-                "4": {
-                    "action": "copy some files fromMicroSD to local hardware",
-                    "expected_results": ""
-                }
-            },
-            "summary": "MicroSD_-__read_files"
-        }
-    },
-    {
-        "test": {
-            "@alias": "bsps-hw.bsps-hw.MicroSD_-__umount",
-            "author": [
-                {
-                    "email": "alexandru.c.georgescu@intel.com",
-                    "name": "alexandru.c.georgescu@intel.com"
-                }
-            ],
-            "execution": {
-                "1": {
-                    "action": "boot system",
-                    "expected_results": "MicroSD in file browser automatically missed . "
-                },
-                "2": {
-                    "action": "plug MicroSD card",
-                    "expected_results": ""
-                },
-                "3": {
-                    "action": "view files in MicroSDby file browser",
-                    "expected_results": ""
-                },
-                "4": {
-                    "action": "unplug MicroSD",
-                    "expected_results": ""
-                }				
-            },
-            "summary": "MicroSD_-__umount"
-        }
-    },
-    {
-        "test": {
-            "@alias": "bsps-hw.bsps-hw.MicroSD_-__write_files",
-            "author": [
-                {
-                    "email": "alexandru.c.georgescu@intel.com",
-                    "name": "alexandru.c.georgescu@intel.com"
-                }
-            ],
-            "execution": {
-                "1": {
-                    "action": "boot system",
-                    "expected_results": "create/copy successfully"
-                },
-                "2": {
-                    "action": "plug MicroSD card",
-                    "expected_results": ""
-                },
-                "3": {
-                    "action": "create files in MicroSD",
-                    "expected_results": ""
-                },
-                "4": {
-                    "action": "copy some files from local hardware to MicroSD",
-                    "expected_results": ""
-                }
-            },
-            "summary": "MicroSD_-__write_files"
-        }
-    },
-    {
-        "test": {
             "@alias": "bsps-hw.bsps-hw.video_-_libva_check_(ogg_video_play)",
             "author": [
                 {
@@ -1283,4 +997,4 @@
             "summary": "Boot_from_JFFS2_image"
         }
     }
-]
\ No newline at end of file
+]
diff --git a/poky/meta/lib/oeqa/manual/compliance-test.json b/poky/meta/lib/oeqa/manual/compliance-test.json
deleted file mode 100644
index 367a416..0000000
--- a/poky/meta/lib/oeqa/manual/compliance-test.json
+++ /dev/null
@@ -1,76 +0,0 @@
-[
-    {
-        "test": {
-            "@alias": "compliance-test.compliance-test.stress_test_-_Genericx86-64",
-            "author": [
-                {
-                    "email": "corneliux.stoicescu@intel.com",
-                    "name": "corneliux.stoicescu@intel.com"
-                }
-            ],
-            "execution": {
-                "1": {
-                    "action": "Bootup with core-image-sato-sdk image",
-                    "expected_results": ""
-                },
-                "2": {
-                    "action": "Execute the crashme test with below command  \n\n./opt/ltp/runltp f  crashme",
-                    "expected_results": "The stress testing should not make the target crash. Check CPU usage and basic functionality of the system after the tests are over. "
-                }
-            },
-            "summary": "stress_test_-_Genericx86-64"
-        }
-    },
-     {
-    "test": {
-      "@alias": "compliance-test.compliance-test.stress_test_-_- crashme_-_-Beaglebone",
-      "author": [
-        {
-          "email": "corneliux.stoicescu@intel.com",
-          "name": "corneliux.stoicescu@intel.com"
-        }
-      ],
-      "execution": {
-        "1": {
-          "action": " Get crashme from http://people.delphiforums.com/gjc/crashme.html",
-          "expected_results": ""
-        },
-        "2": {
-          "action": "Follow the setup steps on above URL, build crashme in target",
-          "expected_results": ""
-        },
-        "3": {
-          "action": " Run crashme for 24 hours",
-          "expected_results": "Target should not crash with the program."
-        }
-      },
-      "summary": "stress_test_-_crashme_-Beaglebone"
-    }
-  },
-  {
-    "test": {
-      "@alias": "compliance-test.compliance-test.stress_test_-_ltp_-Beaglebone",
-      "author": [
-        {
-          "email": "corneliux.stoicescu@intel.com",
-          "name": "corneliux.stoicescu@intel.com"
-        }
-      ],
-      "execution": {
-        "1": {
-          "action": "Build LTP with toolchain or in sdk image",
-          "expected_results": ""
-        },
-        "2": {
-          "action": "Copy LTP folder into target, for example, /opt/ltp. Modify script,  testscripts/ltpstress.sh, set Iostat=1, NO_NETWORK=1",
-          "expected_results": ""
-        },
-        "3": {
-          "action": "cd testscripts/ && ./ltpstress.sh",
-          "expected_results": "This stress case will run for 24 hours Check the result\ntarget should not crash with the program "
-        }
-      },
-      "summary": "stress_test_-_-ltp_-Beaglebone"
-    }
-  }
-]