Yocto 2.3
Move OpenBMC to Yocto 2.3(pyro).
Tested: Built and verified Witherspoon and Palmetto images
Change-Id: I50744030e771f4850afc2a93a10d3507e76d36bc
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
Resolves: openbmc/openbmc#2461
diff --git a/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/_ptest.py b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/_ptest.py
new file mode 100644
index 0000000..aaed9a5
--- /dev/null
+++ b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/_ptest.py
@@ -0,0 +1,103 @@
+import os
+import shutil
+import subprocess
+
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.core.decorator.data import skipIfNotDataVar, skipIfNotFeature
+from oeqa.runtime.decorator.package import OEHasPackage
+
+from oeqa.runtime.cases.dnf import DnfTest
+from oeqa.utils.logparser import *
+from oeqa.utils.httpserver import HTTPService
+
+class PtestRunnerTest(DnfTest):
+
+ @classmethod
+ def setUpClass(cls):
+ rpm_deploy = os.path.join(cls.tc.td['DEPLOY_DIR'], 'rpm')
+ cls.repo_server = HTTPService(rpm_deploy, cls.tc.target.server_ip)
+ cls.repo_server.start()
+
+ @classmethod
+ def tearDownClass(cls):
+ cls.repo_server.stop()
+
+ # a ptest log parser
+ def parse_ptest(self, logfile):
+ parser = Lparser(test_0_pass_regex="^PASS:(.+)",
+ test_0_fail_regex="^FAIL:(.+)",
+ section_0_begin_regex="^BEGIN: .*/(.+)/ptest",
+ section_0_end_regex="^END: .*/(.+)/ptest")
+ parser.init()
+ result = Result()
+
+ with open(logfile, errors='replace') as f:
+ for line in f:
+ result_tuple = parser.parse_line(line)
+ if not result_tuple:
+ continue
+ result_tuple = line_type, category, status, name = parser.parse_line(line)
+
+ if line_type == 'section' and status == 'begin':
+ current_section = name
+ continue
+
+ if line_type == 'section' and status == 'end':
+ current_section = None
+ continue
+
+ if line_type == 'test' and status == 'pass':
+ result.store(current_section, name, status)
+ continue
+
+ if line_type == 'test' and status == 'fail':
+ result.store(current_section, name, status)
+ continue
+
+ result.sort_tests()
+ return result
+
+ def _install_ptest_packages(self):
+ # Get ptest packages that can be installed in the image.
+ packages_dir = os.path.join(self.tc.td['DEPLOY_DIR'], 'rpm')
+ ptest_pkgs = [pkg[:pkg.find('-ptest')+6]
+ for _, _, filenames in os.walk(packages_dir)
+ for pkg in filenames
+ if 'ptest' in pkg
+ and pkg[:pkg.find('-ptest')] in self.tc.image_packages]
+
+ repo_url = 'http://%s:%s' % (self.target.server_ip,
+ self.repo_server.port)
+ dnf_options = ('--repofrompath=oe-ptest-repo,%s '
+ '--nogpgcheck '
+ 'install -y' % repo_url)
+ self.dnf('%s %s ptest-runner' % (dnf_options, ' '.join(ptest_pkgs)))
+
+ @skipIfNotFeature('package-management',
+ 'Test requires package-management to be in DISTRO_FEATURES')
+ @skipIfNotFeature('ptest',
+ 'Test requires package-management to be in DISTRO_FEATURES')
+ @skipIfNotDataVar('IMAGE_PKGTYPE', 'rpm',
+ 'RPM is not the primary package manager')
+ @OEHasPackage(['dnf'])
+ @OETestDepends(['ssh.SSHTest.test_ssh'])
+ def test_ptestrunner(self):
+ self.ptest_log = os.path.join(self.tc.td['TEST_LOG_DIR'],
+ 'ptest-%s.log' % self.tc.td['DATETIME'])
+ self._install_ptest_packages()
+
+ (runnerstatus, result) = self.target.run('/usr/bin/ptest-runner > /tmp/ptest.log 2>&1', 0)
+ #exit code is !=0 even if ptest-runner executes because some ptest tests fail.
+ self.assertTrue(runnerstatus != 127, msg="Cannot execute ptest-runner!")
+ self.target.copyFrom('/tmp/ptest.log', self.ptest_log)
+ shutil.copyfile(self.ptest_log, "ptest.log")
+
+ result = self.parse_ptest("ptest.log")
+ log_results_to_location = "./results"
+ if os.path.exists(log_results_to_location):
+ shutil.rmtree(log_results_to_location)
+ os.makedirs(log_results_to_location)
+
+ result.log_as_files(log_results_to_location, test_status = ['pass','fail'])
diff --git a/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/_qemutiny.py b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/_qemutiny.py
new file mode 100644
index 0000000..7b5b481
--- /dev/null
+++ b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/_qemutiny.py
@@ -0,0 +1,8 @@
+from oeqa.runtime.case import OERuntimeTestCase
+
+class QemuTinyTest(OERuntimeTestCase):
+
+ def test_boot_tiny(self):
+ status, output = self.target.run_serial('uname -a')
+ msg = "Cannot detect poky tiny boot!"
+ self.assertTrue("yocto-tiny" in output, msg)
diff --git a/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/buildcpio.py b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/buildcpio.py
new file mode 100644
index 0000000..59edc9c
--- /dev/null
+++ b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/buildcpio.py
@@ -0,0 +1,30 @@
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.core.decorator.data import skipIfNotFeature
+
+from oeqa.runtime.utils.targetbuildproject import TargetBuildProject
+
+class BuildCpioTest(OERuntimeTestCase):
+
+ @classmethod
+ def setUpClass(cls):
+ uri = 'https://ftp.gnu.org/gnu/cpio'
+ uri = '%s/cpio-2.12.tar.bz2' % uri
+ cls.project = TargetBuildProject(cls.tc.target,
+ uri,
+ dl_dir = cls.tc.td['DL_DIR'])
+ cls.project.download_archive()
+
+ @classmethod
+ def tearDownClass(cls):
+ cls.project.clean()
+
+ @OETestID(205)
+ @skipIfNotFeature('tools-sdk',
+ 'Test requires tools-sdk to be in IMAGE_FEATURES')
+ @OETestDepends(['ssh.SSHTest.test_ssh'])
+ def test_cpio(self):
+ self.project.run_configure()
+ self.project.run_make()
+ self.project.run_install()
diff --git a/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/buildgalculator.py b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/buildgalculator.py
new file mode 100644
index 0000000..7c9d4a3
--- /dev/null
+++ b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/buildgalculator.py
@@ -0,0 +1,28 @@
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.core.decorator.data import skipIfNotFeature
+
+from oeqa.runtime.utils.targetbuildproject import TargetBuildProject
+
+class GalculatorTest(OERuntimeTestCase):
+
+ @classmethod
+ def setUpClass(cls):
+ uri = 'http://galculator.mnim.org/downloads/galculator-2.1.4.tar.bz2'
+ cls.project = TargetBuildProject(cls.tc.target,
+ uri,
+ dl_dir = cls.tc.td['DL_DIR'])
+ cls.project.download_archive()
+
+ @classmethod
+ def tearDownClass(cls):
+ cls.project.clean()
+
+ @OETestID(1526)
+ @skipIfNotFeature('tools-sdk',
+ 'Test requires tools-sdk to be in IMAGE_FEATURES')
+ @OETestDepends(['ssh.SSHTest.test_ssh'])
+ def test_galculator(self):
+ self.project.run_configure()
+ self.project.run_make()
diff --git a/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/buildlzip.py b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/buildlzip.py
new file mode 100644
index 0000000..ca3fead
--- /dev/null
+++ b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/buildlzip.py
@@ -0,0 +1,34 @@
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.core.decorator.data import skipIfNotFeature
+
+from oeqa.runtime.utils.targetbuildproject import TargetBuildProject
+
+class BuildLzipTest(OERuntimeTestCase):
+
+ @classmethod
+ def setUpClass(cls):
+ uri = 'http://downloads.yoctoproject.org/mirror/sources'
+ uri = '%s/lzip-1.19.tar.gz' % uri
+ cls.project = TargetBuildProject(cls.tc.target,
+ uri,
+ dl_dir = cls.tc.td['DL_DIR'])
+ cls.project.download_archive()
+
+ @classmethod
+ def tearDownClass(cls):
+ cls.project.clean()
+
+ @OETestID(206)
+ @skipIfNotFeature('tools-sdk',
+ 'Test requires tools-sdk to be in IMAGE_FEATURES')
+ @OETestDepends(['ssh.SSHTest.test_ssh'])
+ def test_lzip(self):
+ self.project.run_configure()
+ self.project.run_make()
+ self.project.run_install()
+
+ @classmethod
+ def tearDownClass(self):
+ self.project.clean()
diff --git a/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/connman.py b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/connman.py
new file mode 100644
index 0000000..12456b4
--- /dev/null
+++ b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/connman.py
@@ -0,0 +1,30 @@
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.runtime.decorator.package import OEHasPackage
+
+class ConnmanTest(OERuntimeTestCase):
+
+ def service_status(self, service):
+ if 'systemd' in self.tc.td['DISTRO_FEATURES']:
+ (_, output) = self.target.run('systemctl status -l %s' % service)
+ return output
+ else:
+ return "Unable to get status or logs for %s" % service
+
+ @OETestID(961)
+ @OETestDepends(['ssh.SSHTest.test_ssh'])
+ @OEHasPackage(["connman"])
+ def test_connmand_help(self):
+ (status, output) = self.target.run('/usr/sbin/connmand --help')
+ msg = 'Failed to get connman help. Output: %s' % output
+ self.assertEqual(status, 0, msg=msg)
+
+ @OETestID(221)
+ @OETestDepends(['connman.ConnmanTest.test_connmand_help'])
+ def test_connmand_running(self):
+ cmd = '%s | grep [c]onnmand' % self.tc.target_cmds['ps']
+ (status, output) = self.target.run(cmd)
+ if status != 0:
+ self.logger.info(self.service_status("connman"))
+ self.fail("No connmand process running")
diff --git a/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/date.py b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/date.py
new file mode 100644
index 0000000..ece7338
--- /dev/null
+++ b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/date.py
@@ -0,0 +1,38 @@
+import re
+
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+
+class DateTest(OERuntimeTestCase):
+
+ def setUp(self):
+ if self.tc.td.get('VIRTUAL-RUNTIME_init_manager') == 'systemd':
+ self.logger.debug('Stopping systemd-timesyncd daemon')
+ self.target.run('systemctl stop systemd-timesyncd')
+
+ def tearDown(self):
+ if self.tc.td.get('VIRTUAL-RUNTIME_init_manager') == 'systemd':
+ self.logger.debug('Starting systemd-timesyncd daemon')
+ self.target.run('systemctl start systemd-timesyncd')
+
+ @OETestID(211)
+ @OETestDepends(['ssh.SSHTest.test_ssh'])
+ def test_date(self):
+ (status, output) = self.target.run('date +"%Y-%m-%d %T"')
+ msg = 'Failed to get initial date, output: %s' % output
+ self.assertEqual(status, 0, msg=msg)
+ oldDate = output
+
+ sampleDate = '"2016-08-09 10:00:00"'
+ (status, output) = self.target.run("date -s %s" % sampleDate)
+ self.assertEqual(status, 0, msg='Date set failed, output: %s' % output)
+
+ (status, output) = self.target.run("date -R")
+ p = re.match('Tue, 09 Aug 2016 10:00:.. \+0000', output)
+ msg = 'The date was not set correctly, output: %s' % output
+ self.assertTrue(p, msg=msg)
+
+ (status, output) = self.target.run('date -s "%s"' % oldDate)
+ msg = 'Failed to reset date, output: %s' % output
+ self.assertEqual(status, 0, msg=msg)
diff --git a/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/df.py b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/df.py
new file mode 100644
index 0000000..aecc32d
--- /dev/null
+++ b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/df.py
@@ -0,0 +1,13 @@
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+
+class DfTest(OERuntimeTestCase):
+
+ @OETestID(234)
+ @OETestDepends(['ssh.SSHTest.test_ssh'])
+ def test_df(self):
+ cmd = "df / | sed -n '2p' | awk '{print $4}'"
+ (status,output) = self.target.run(cmd)
+ msg = 'Not enough space on image. Current size is %s' % output
+ self.assertTrue(int(output)>5120, msg=msg)
diff --git a/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/dnf.py b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/dnf.py
new file mode 100644
index 0000000..2f87296
--- /dev/null
+++ b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/dnf.py
@@ -0,0 +1,123 @@
+import os
+import re
+import subprocess
+from oeqa.utils.httpserver import HTTPService
+
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.core.decorator.data import skipIfNotDataVar, skipIfNotFeature
+from oeqa.runtime.decorator.package import OEHasPackage
+
+class DnfTest(OERuntimeTestCase):
+
+ def dnf(self, command, expected = 0):
+ command = 'dnf %s' % command
+ status, output = self.target.run(command, 1500)
+ message = os.linesep.join([command, output])
+ self.assertEqual(status, expected, message)
+ return output
+
+class DnfBasicTest(DnfTest):
+
+ @skipIfNotFeature('package-management',
+ 'Test requires package-management to be in IMAGE_FEATURES')
+ @skipIfNotDataVar('IMAGE_PKGTYPE', 'rpm',
+ 'RPM is not the primary package manager')
+ @OEHasPackage(['dnf'])
+ @OETestDepends(['ssh.SSHTest.test_ssh'])
+ @OETestID(1735)
+ def test_dnf_help(self):
+ self.dnf('--help')
+
+ @OETestDepends(['dnf.DnfBasicTest.test_dnf_help'])
+ @OETestID(1739)
+ def test_dnf_version(self):
+ self.dnf('--version')
+
+ @OETestDepends(['dnf.DnfBasicTest.test_dnf_help'])
+ @OETestID(1737)
+ def test_dnf_info(self):
+ self.dnf('info dnf')
+
+ @OETestDepends(['dnf.DnfBasicTest.test_dnf_help'])
+ @OETestID(1738)
+ def test_dnf_search(self):
+ self.dnf('search dnf')
+
+ @OETestDepends(['dnf.DnfBasicTest.test_dnf_help'])
+ @OETestID(1736)
+ def test_dnf_history(self):
+ self.dnf('history')
+
+class DnfRepoTest(DnfTest):
+
+ @classmethod
+ def setUpClass(cls):
+ cls.repo_server = HTTPService(os.path.join(cls.tc.td['WORKDIR'], 'oe-testimage-repo'),
+ cls.tc.target.server_ip)
+ cls.repo_server.start()
+
+ @classmethod
+ def tearDownClass(cls):
+ cls.repo_server.stop()
+
+ def dnf_with_repo(self, command):
+ pkgarchs = os.listdir(os.path.join(self.tc.td['WORKDIR'], 'oe-testimage-repo'))
+ deploy_url = 'http://%s:%s/' %(self.target.server_ip, self.repo_server.port)
+ cmdlinerepoopts = ["--repofrompath=oe-testimage-repo-%s,%s%s" %(arch, deploy_url, arch) for arch in pkgarchs]
+
+ self.dnf(" ".join(cmdlinerepoopts) + " --nogpgcheck " + command)
+
+ @OETestDepends(['dnf.DnfBasicTest.test_dnf_help'])
+ @OETestID(1744)
+ def test_dnf_makecache(self):
+ self.dnf_with_repo('makecache')
+
+
+# Does not work when repo is specified on the command line
+# @OETestDepends(['dnf.DnfRepoTest.test_dnf_makecache'])
+# def test_dnf_repolist(self):
+# self.dnf_with_repo('repolist')
+
+ @OETestDepends(['dnf.DnfRepoTest.test_dnf_makecache'])
+ @OETestID(1746)
+ def test_dnf_repoinfo(self):
+ self.dnf_with_repo('repoinfo')
+
+ @OETestDepends(['dnf.DnfRepoTest.test_dnf_makecache'])
+ @OETestID(1740)
+ def test_dnf_install(self):
+ self.dnf_with_repo('install -y run-postinsts-dev')
+
+ @OETestDepends(['dnf.DnfRepoTest.test_dnf_install'])
+ @OETestID(1741)
+ def test_dnf_install_dependency(self):
+ self.dnf_with_repo('remove -y run-postinsts')
+ self.dnf_with_repo('install -y run-postinsts-dev')
+
+ @OETestDepends(['dnf.DnfRepoTest.test_dnf_install_dependency'])
+ @OETestID(1742)
+ def test_dnf_install_from_disk(self):
+ self.dnf_with_repo('remove -y run-postinsts-dev')
+ self.dnf_with_repo('install -y --downloadonly run-postinsts-dev')
+ status, output = self.target.run('find /var/cache/dnf -name run-postinsts-dev*rpm', 1500)
+ self.assertEqual(status, 0, output)
+ self.dnf_with_repo('install -y %s' % output)
+
+ @OETestDepends(['dnf.DnfRepoTest.test_dnf_install_from_disk'])
+ @OETestID(1743)
+ def test_dnf_install_from_http(self):
+ output = subprocess.check_output('%s %s -name run-postinsts-dev*' % (bb.utils.which(os.getenv('PATH'), "find"),
+ os.path.join(self.tc.td['WORKDIR'], 'oe-testimage-repo')), shell=True).decode("utf-8")
+ rpm_path = output.split("/")[-2] + "/" + output.split("/")[-1]
+ url = 'http://%s:%s/%s' %(self.target.server_ip, self.repo_server.port, rpm_path)
+ self.dnf_with_repo('remove -y run-postinsts-dev')
+ self.dnf_with_repo('install -y %s' % url)
+
+ @OETestDepends(['dnf.DnfRepoTest.test_dnf_install'])
+ @OETestID(1745)
+ def test_dnf_reinstall(self):
+ self.dnf_with_repo('reinstall -y run-postinsts-dev')
+
+
diff --git a/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/gcc.py b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/gcc.py
new file mode 100644
index 0000000..9110831
--- /dev/null
+++ b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/gcc.py
@@ -0,0 +1,73 @@
+import os
+
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.core.decorator.data import skipIfNotFeature
+
+class GccCompileTest(OERuntimeTestCase):
+
+ @classmethod
+ def setUpClass(cls):
+ dst = '/tmp/'
+ src = os.path.join(cls.tc.files_dir, 'test.c')
+ cls.tc.target.copyTo(src, dst)
+
+ src = os.path.join(cls.tc.runtime_files_dir, 'testmakefile')
+ cls.tc.target.copyTo(src, dst)
+
+ src = os.path.join(cls.tc.files_dir, 'test.cpp')
+ cls.tc.target.copyTo(src, dst)
+
+ @classmethod
+ def tearDownClass(cls):
+ files = '/tmp/test.c /tmp/test.o /tmp/test /tmp/testmakefile'
+ cls.tc.target.run('rm %s' % files)
+
+ @OETestID(203)
+ @skipIfNotFeature('tools-sdk',
+ 'Test requires tools-sdk to be in IMAGE_FEATURES')
+ @OETestDepends(['ssh.SSHTest.test_ssh'])
+ def test_gcc_compile(self):
+ status, output = self.target.run('gcc /tmp/test.c -o /tmp/test -lm')
+ msg = 'gcc compile failed, output: %s' % output
+ self.assertEqual(status, 0, msg=msg)
+
+ status, output = self.target.run('/tmp/test')
+ msg = 'running compiled file failed, output: %s' % output
+ self.assertEqual(status, 0, msg=msg)
+
+ @OETestID(200)
+ @skipIfNotFeature('tools-sdk',
+ 'Test requires tools-sdk to be in IMAGE_FEATURES')
+ @OETestDepends(['ssh.SSHTest.test_ssh'])
+ def test_gpp_compile(self):
+ status, output = self.target.run('g++ /tmp/test.c -o /tmp/test -lm')
+ msg = 'g++ compile failed, output: %s' % output
+ self.assertEqual(status, 0, msg=msg)
+
+ status, output = self.target.run('/tmp/test')
+ msg = 'running compiled file failed, output: %s' % output
+ self.assertEqual(status, 0, msg=msg)
+
+ @OETestID(1142)
+ @skipIfNotFeature('tools-sdk',
+ 'Test requires tools-sdk to be in IMAGE_FEATURES')
+ @OETestDepends(['ssh.SSHTest.test_ssh'])
+ def test_gpp2_compile(self):
+ status, output = self.target.run('g++ /tmp/test.cpp -o /tmp/test -lm')
+ msg = 'g++ compile failed, output: %s' % output
+ self.assertEqual(status, 0, msg=msg)
+
+ status, output = self.target.run('/tmp/test')
+ msg = 'running compiled file failed, output: %s' % output
+ self.assertEqual(status, 0, msg=msg)
+
+ @OETestID(204)
+ @skipIfNotFeature('tools-sdk',
+ 'Test requires tools-sdk to be in IMAGE_FEATURES')
+ @OETestDepends(['ssh.SSHTest.test_ssh'])
+ def test_make(self):
+ status, output = self.target.run('cd /tmp; make -f testmakefile')
+ msg = 'running make failed, output %s' % output
+ self.assertEqual(status, 0, msg=msg)
diff --git a/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/kernelmodule.py b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/kernelmodule.py
new file mode 100644
index 0000000..11ad7b7
--- /dev/null
+++ b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/kernelmodule.py
@@ -0,0 +1,40 @@
+import os
+
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.core.decorator.data import skipIfNotFeature
+
+class KernelModuleTest(OERuntimeTestCase):
+
+ @classmethod
+ def setUpClass(cls):
+ src = os.path.join(cls.tc.runtime_files_dir, 'hellomod.c')
+ dst = '/tmp/hellomod.c'
+ cls.tc.target.copyTo(src, dst)
+
+ src = os.path.join(cls.tc.runtime_files_dir, 'hellomod_makefile')
+ dst = '/tmp/Makefile'
+ cls.tc.target.copyTo(src, dst)
+
+ @classmethod
+ def tearDownClass(cls):
+ files = '/tmp/Makefile /tmp/hellomod.c'
+ cls.tc.target.run('rm %s' % files)
+
+ @OETestID(1541)
+ @skipIfNotFeature('tools-sdk',
+ 'Test requires tools-sdk to be in IMAGE_FEATURES')
+ @OETestDepends(['gcc.GccCompileTest.test_gcc_compile'])
+ def test_kernel_module(self):
+ cmds = [
+ 'cd /usr/src/kernel && make scripts',
+ 'cd /tmp && make',
+ 'cd /tmp && insmod hellomod.ko',
+ 'lsmod | grep hellomod',
+ 'dmesg | grep Hello',
+ 'rmmod hellomod', 'dmesg | grep "Cleaning up hellomod"'
+ ]
+ for cmd in cmds:
+ status, output = self.target.run(cmd, 900)
+ self.assertEqual(status, 0, msg='\n'.join([cmd, output]))
diff --git a/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/ldd.py b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/ldd.py
new file mode 100644
index 0000000..c6d92fd
--- /dev/null
+++ b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/ldd.py
@@ -0,0 +1,25 @@
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.core.decorator.data import skipIfNotFeature
+
+class LddTest(OERuntimeTestCase):
+
+ @OETestID(962)
+ @skipIfNotFeature('tools-sdk',
+ 'Test requires tools-sdk to be in IMAGE_FEATURES')
+ @OETestDepends(['ssh.SSHTest.test_ssh'])
+ def test_ldd_exists(self):
+ status, output = self.target.run('which ldd')
+ msg = 'ldd does not exist in PATH: which ldd: %s' % output
+ self.assertEqual(status, 0, msg=msg)
+
+ @OETestID(239)
+ @OETestDepends(['ldd.LddTest.test_ldd_exists'])
+ def test_ldd_rtldlist_check(self):
+ cmd = ('for i in $(which ldd | xargs cat | grep "^RTLDLIST"| '
+ 'cut -d\'=\' -f2|tr -d \'"\'); '
+ 'do test -f $i && echo $i && break; done')
+ status, output = self.target.run(cmd)
+ msg = "ldd path not correct or RTLDLIST files don't exist."
+ self.assertEqual(status, 0, msg=msg)
diff --git a/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/logrotate.py b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/logrotate.py
new file mode 100644
index 0000000..992fef2
--- /dev/null
+++ b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/logrotate.py
@@ -0,0 +1,42 @@
+# This test should cover https://bugzilla.yoctoproject.org/tr_show_case.cgi?case_id=289 testcase
+# Note that the image under test must have logrotate installed
+
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.runtime.decorator.package import OEHasPackage
+
+class LogrotateTest(OERuntimeTestCase):
+
+ @classmethod
+ def tearDownClass(cls):
+ cls.tc.target.run('rm -rf $HOME/logrotate_dir')
+
+ @OETestID(1544)
+ @OETestDepends(['ssh.SSHTest.test_ssh'])
+ @OEHasPackage(['logrotate'])
+ def test_1_logrotate_setup(self):
+ status, output = self.target.run('mkdir $HOME/logrotate_dir')
+ msg = 'Could not create logrotate_dir. Output: %s' % output
+ self.assertEqual(status, 0, msg = msg)
+
+ cmd = ('sed -i "s#wtmp {#wtmp {\\n olddir $HOME/logrotate_dir#"'
+ ' /etc/logrotate.conf')
+ status, output = self.target.run(cmd)
+ msg = ('Could not write to logrotate.conf file. Status and output: '
+ ' %s and %s' % (status, output))
+ self.assertEqual(status, 0, msg = msg)
+
+ @OETestID(1542)
+ @OETestDepends(['logrotate.LogrotateTest.test_1_logrotate_setup'])
+ def test_2_logrotate(self):
+ status, output = self.target.run('logrotate -f /etc/logrotate.conf')
+ msg = ('logrotate service could not be reloaded. Status and output: '
+ '%s and %s' % (status, output))
+ self.assertEqual(status, 0, msg = msg)
+
+ _, output = self.target.run('ls -la $HOME/logrotate_dir/ | wc -l')
+ msg = ('new logfile could not be created. List of files within log '
+ 'directory: %s' % (
+ self.target.run('ls -la $HOME/logrotate_dir')[1]))
+ self.assertTrue(int(output)>=3, msg = msg)
diff --git a/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/multilib.py b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/multilib.py
new file mode 100644
index 0000000..8c167f1
--- /dev/null
+++ b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/multilib.py
@@ -0,0 +1,41 @@
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.core.decorator.data import skipIfNotInDataVar
+from oeqa.runtime.decorator.package import OEHasPackage
+
+class MultilibTest(OERuntimeTestCase):
+
+ def archtest(self, binary, arch):
+ """
+ Check that ``binary`` has the ELF class ``arch`` (e.g. ELF32/ELF64).
+ """
+
+ status, output = self.target.run('readelf -h %s' % binary)
+ self.assertEqual(status, 0, 'Failed to readelf %s' % binary)
+
+ l = [l.split()[1] for l in output.split('\n') if "Class:" in l]
+ if l:
+ theclass = l[0]
+ else:
+ self.fail('Cannot parse readelf. Output:\n%s' % output)
+
+ msg = "%s isn't %s (is %s)" % (binary, arch, theclass)
+ self.assertEqual(theclass, arch, msg=msg)
+
+ @OETestID(1593)
+ @skipIfNotInDataVar('MULTILIBS', 'multilib:lib32',
+ "This isn't a multilib:lib32 image")
+ @OETestDepends(['ssh.SSHTest.test_ssh'])
+ def test_check_multilib_libc(self):
+ """
+ Check that a multilib image has both 32-bit and 64-bit libc in.
+ """
+ self.archtest("/lib/libc.so.6", "ELF32")
+ self.archtest("/lib64/libc.so.6", "ELF64")
+
+ @OETestID(279)
+ @OETestDepends(['multilib.MultilibTest.test_check_multilib_libc'])
+ @OEHasPackage(['lib32-connman'])
+ def test_file_connman(self):
+ self.archtest("/usr/sbin/connmand", "ELF32")
diff --git a/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/oe_syslog.py b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/oe_syslog.py
new file mode 100644
index 0000000..005b697
--- /dev/null
+++ b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/oe_syslog.py
@@ -0,0 +1,66 @@
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.core.decorator.data import skipIfDataVar
+from oeqa.runtime.decorator.package import OEHasPackage
+
+class SyslogTest(OERuntimeTestCase):
+
+ @OETestID(201)
+ @OETestDepends(['ssh.SSHTest.test_ssh'])
+ @OEHasPackage(["busybox-syslog", "sysklogd"])
+ def test_syslog_running(self):
+ cmd = '%s | grep -i [s]yslogd' % self.tc.target_cmds['ps']
+ status, output = self.target.run(cmd)
+ msg = "No syslogd process; ps output: %s" % output
+ self.assertEqual(status, 0, msg=msg)
+
+class SyslogTestConfig(OERuntimeTestCase):
+
+ @OETestID(1149)
+ @OETestDepends(['oe_syslog.SyslogTest.test_syslog_running'])
+ def test_syslog_logger(self):
+ status, output = self.target.run('logger foobar')
+ msg = "Can't log into syslog. Output: %s " % output
+ self.assertEqual(status, 0, msg=msg)
+
+ status, output = self.target.run('grep foobar /var/log/messages')
+ if status != 0:
+ if self.tc.td.get("VIRTUAL-RUNTIME_init_manager") == "systemd":
+ status, output = self.target.run('journalctl -o cat | grep foobar')
+ else:
+ status, output = self.target.run('logread | grep foobar')
+ msg = ('Test log string not found in /var/log/messages or logread.'
+ ' Output: %s ' % output)
+ self.assertEqual(status, 0, msg=msg)
+
+ @OETestID(1150)
+ @OETestDepends(['oe_syslog.SyslogTest.test_syslog_running'])
+ def test_syslog_restart(self):
+ if "systemd" != self.tc.td.get("VIRTUAL-RUNTIME_init_manager", ""):
+ (_, _) = self.target.run('/etc/init.d/syslog restart')
+ else:
+ (_, _) = self.target.run('systemctl restart syslog.service')
+
+
+ @OETestID(202)
+ @OETestDepends(['oe_syslog.SyslogTestConfig.test_syslog_logger'])
+ @OEHasPackage(["!sysklogd", "busybox"])
+ @skipIfDataVar('VIRTUAL-RUNTIME_init_manager', 'systemd',
+ 'Not appropiate for systemd image')
+ def test_syslog_startup_config(self):
+ cmd = 'echo "LOGFILE=/var/log/test" >> /etc/syslog-startup.conf'
+ self.target.run(cmd)
+ status, output = self.target.run('/etc/init.d/syslog restart')
+ msg = ('Could not restart syslog service. Status and output:'
+ ' %s and %s' % (status,output))
+ self.assertEqual(status, 0, msg)
+
+ cmd = 'logger foobar && grep foobar /var/log/test'
+ status,output = self.target.run(cmd)
+ msg = 'Test log string not found. Output: %s ' % output
+ self.assertEqual(status, 0, msg=msg)
+
+ cmd = "sed -i 's#LOGFILE=/var/log/test##' /etc/syslog-startup.conf"
+ self.target.run(cmd)
+ self.target.run('/etc/init.d/syslog restart')
diff --git a/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/pam.py b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/pam.py
new file mode 100644
index 0000000..3654cdc
--- /dev/null
+++ b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/pam.py
@@ -0,0 +1,33 @@
+# This test should cover https://bugzilla.yoctoproject.org/tr_show_case.cgi?case_id=287 testcase
+# Note that the image under test must have "pam" in DISTRO_FEATURES
+
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.core.decorator.data import skipIfNotFeature
+
+class PamBasicTest(OERuntimeTestCase):
+
+ @OETestID(1543)
+ @skipIfNotFeature('pam', 'Test requires pam to be in DISTRO_FEATURES')
+ @OETestDepends(['ssh.SSHTest.test_ssh'])
+ def test_pam(self):
+ status, output = self.target.run('login --help')
+ msg = ('login command does not work as expected. '
+ 'Status and output:%s and %s' % (status, output))
+ self.assertEqual(status, 1, msg = msg)
+
+ status, output = self.target.run('passwd --help')
+ msg = ('passwd command does not work as expected. '
+ 'Status and output:%s and %s' % (status, output))
+ self.assertEqual(status, 0, msg = msg)
+
+ status, output = self.target.run('su --help')
+ msg = ('su command does not work as expected. '
+ 'Status and output:%s and %s' % (status, output))
+ self.assertEqual(status, 0, msg = msg)
+
+ status, output = self.target.run('useradd --help')
+ msg = ('useradd command does not work as expected. '
+ 'Status and output:%s and %s' % (status, output))
+ self.assertEqual(status, 0, msg = msg)
diff --git a/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/parselogs.py b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/parselogs.py
new file mode 100644
index 0000000..6e92946
--- /dev/null
+++ b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/parselogs.py
@@ -0,0 +1,359 @@
+import os
+
+from subprocess import check_output
+from shutil import rmtree
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.core.decorator.data import skipIfDataVar
+from oeqa.runtime.decorator.package import OEHasPackage
+
+#in the future these lists could be moved outside of module
+errors = ["error", "cannot", "can\'t", "failed"]
+
+common_errors = [
+ "(WW) warning, (EE) error, (NI) not implemented, (??) unknown.",
+ "dma timeout",
+ "can\'t add hid device:",
+ "usbhid: probe of ",
+ "_OSC failed (AE_ERROR)",
+ "_OSC failed (AE_SUPPORT)",
+ "AE_ALREADY_EXISTS",
+ "ACPI _OSC request failed (AE_SUPPORT)",
+ "can\'t disable ASPM",
+ "Failed to load module \"vesa\"",
+ "Failed to load module vesa",
+ "Failed to load module \"modesetting\"",
+ "Failed to load module modesetting",
+ "Failed to load module \"glx\"",
+ "Failed to load module \"fbdev\"",
+ "Failed to load module fbdev",
+ "Failed to load module glx",
+ "[drm] Cannot find any crtc or sizes - going 1024x768",
+ "_OSC failed (AE_NOT_FOUND); disabling ASPM",
+ "Open ACPI failed (/var/run/acpid.socket) (No such file or directory)",
+ "NX (Execute Disable) protection cannot be enabled: non-PAE kernel!",
+ "hd.: possibly failed opcode",
+ 'NETLINK INITIALIZATION FAILED',
+ 'kernel: Cannot find map file',
+ 'omap_hwmod: debugss: _wait_target_disable failed',
+ 'VGA arbiter: cannot open kernel arbiter, no multi-card support',
+ 'Failed to find URL:http://ipv4.connman.net/online/status.html',
+ 'Online check failed for',
+ 'netlink init failed',
+ 'Fast TSC calibration',
+ "BAR 0-9",
+ "Failed to load module \"ati\"",
+ "controller can't do DEVSLP, turning off",
+ "stmmac_dvr_probe: warning: cannot get CSR clock",
+ "error: couldn\'t mount because of unsupported optional features",
+ "GPT: Use GNU Parted to correct GPT errors",
+ "Cannot set xattr user.Librepo.DownloadInProgress",
+ ]
+
+video_related = [
+ "uvesafb",
+]
+
+x86_common = [
+ '[drm:psb_do_init] *ERROR* Debug is',
+ 'wrong ELF class',
+ 'Could not enable PowerButton event',
+ 'probe of LNXPWRBN:00 failed with error -22',
+ 'pmd_set_huge: Cannot satisfy',
+ 'failed to setup card detect gpio',
+ 'amd_nb: Cannot enumerate AMD northbridges',
+ 'failed to retrieve link info, disabling eDP',
+ 'Direct firmware load for iwlwifi',
+] + common_errors
+
+qemux86_common = [
+ 'wrong ELF class',
+ "fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.",
+ "can't claim BAR ",
+ 'amd_nb: Cannot enumerate AMD northbridges',
+ 'uvesafb: 5000 ms task timeout, infinitely waiting',
+ 'tsc: HPET/PMTIMER calibration failed',
+] + common_errors
+
+ignore_errors = {
+ 'default' : common_errors,
+ 'qemux86' : [
+ 'Failed to access perfctr msr (MSR',
+ 'pci 0000:00:00.0: [Firmware Bug]: reg 0x..: invalid BAR (can\'t size)',
+ ] + qemux86_common,
+ 'qemux86-64' : qemux86_common,
+ 'qemumips' : [
+ 'Failed to load module "glx"',
+ 'pci 0000:00:00.0: [Firmware Bug]: reg 0x..: invalid BAR (can\'t size)',
+ ] + common_errors,
+ 'qemumips64' : [
+ 'pci 0000:00:00.0: [Firmware Bug]: reg 0x..: invalid BAR (can\'t size)',
+ ] + common_errors,
+ 'qemuppc' : [
+ 'PCI 0000:00 Cannot reserve Legacy IO [io 0x0000-0x0fff]',
+ 'host side 80-wire cable detection failed, limiting max speed',
+ 'mode "640x480" test failed',
+ 'Failed to load module "glx"',
+ 'can\'t handle BAR above 4GB',
+ 'Cannot reserve Legacy IO',
+ ] + common_errors,
+ 'qemuarm' : [
+ 'mmci-pl18x: probe of fpga:05 failed with error -22',
+ 'mmci-pl18x: probe of fpga:0b failed with error -22',
+ 'Failed to load module "glx"',
+ 'OF: amba_device_add() failed (-19) for /amba/smc@10100000',
+ 'OF: amba_device_add() failed (-19) for /amba/mpmc@10110000',
+ 'OF: amba_device_add() failed (-19) for /amba/sctl@101e0000',
+ 'OF: amba_device_add() failed (-19) for /amba/watchdog@101e1000',
+ 'OF: amba_device_add() failed (-19) for /amba/sci@101f0000',
+ 'OF: amba_device_add() failed (-19) for /amba/ssp@101f4000',
+ 'OF: amba_device_add() failed (-19) for /amba/fpga/sci@a000',
+ 'Failed to initialize \'/amba/timer@101e3000\': -22',
+ 'jitterentropy: Initialization failed with host not compliant with requirements: 2',
+ ] + common_errors,
+ 'qemuarm64' : [
+ 'Fatal server error:',
+ '(EE) Server terminated with error (1). Closing log file.',
+ 'dmi: Firmware registration failed.',
+ 'irq: type mismatch, failed to map hwirq-27 for /intc',
+ ] + common_errors,
+ 'emenlow' : [
+ '[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness',
+ '(EE) Failed to load module "psb"',
+ '(EE) Failed to load module psb',
+ '(EE) Failed to load module "psbdrv"',
+ '(EE) Failed to load module psbdrv',
+ '(EE) open /dev/fb0: No such file or directory',
+ '(EE) AIGLX: reverting to software rendering',
+ ] + x86_common,
+ 'intel-core2-32' : [
+ 'ACPI: No _BQC method, cannot determine initial brightness',
+ '[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness',
+ '(EE) Failed to load module "psb"',
+ '(EE) Failed to load module psb',
+ '(EE) Failed to load module "psbdrv"',
+ '(EE) Failed to load module psbdrv',
+ '(EE) open /dev/fb0: No such file or directory',
+ '(EE) AIGLX: reverting to software rendering',
+ 'dmi: Firmware registration failed.',
+ 'ioremap error for 0x78',
+ ] + x86_common,
+ 'intel-corei7-64' : [
+ 'can\'t set Max Payload Size to 256',
+ 'intel_punit_ipc: can\'t request region for resource',
+ '[drm] parse error at position 4 in video mode \'efifb\'',
+ 'ACPI Error: Could not enable RealTimeClock event',
+ 'ACPI Warning: Could not enable fixed event - RealTimeClock',
+ 'hci_intel INT33E1:00: Unable to retrieve gpio',
+ 'hci_intel: probe of INT33E1:00 failed',
+ 'can\'t derive routing for PCI INT A',
+ 'failed to read out thermal zone',
+ 'Bluetooth: hci0: Setting Intel event mask failed',
+ 'ttyS2 - failed to request DMA',
+ ] + x86_common,
+ 'crownbay' : x86_common,
+ 'genericx86' : x86_common,
+ 'genericx86-64' : [
+ 'Direct firmware load for i915',
+ 'Failed to load firmware i915',
+ 'Failed to fetch GuC',
+ 'Failed to initialize GuC',
+ 'Failed to load DMC firmware',
+ 'The driver is built-in, so to load the firmware you need to',
+ ] + x86_common,
+ 'edgerouter' : [
+ 'Fatal server error:',
+ ] + common_errors,
+ 'jasperforest' : [
+ 'Activated service \'org.bluez\' failed:',
+ 'Unable to find NFC netlink family',
+ ] + common_errors,
+}
+
+log_locations = ["/var/log/","/var/log/dmesg", "/tmp/dmesg_output.log"]
+
+class ParseLogsTest(OERuntimeTestCase):
+
+ @classmethod
+ def setUpClass(cls):
+ cls.errors = errors
+
+ # When systemd is enabled we need to notice errors on
+ # circular dependencies in units.
+ if 'systemd' in cls.td.get('DISTRO_FEATURES', ''):
+ cls.errors.extend([
+ 'Found ordering cycle on',
+ 'Breaking ordering cycle by deleting job',
+ 'deleted to break ordering cycle',
+ 'Ordering cycle found, skipping',
+ ])
+
+ cls.ignore_errors = ignore_errors
+ cls.log_locations = log_locations
+ cls.msg = ''
+ is_lsb, _ = cls.tc.target.run("which LSB_Test.sh")
+ if is_lsb == 0:
+ for machine in cls.ignore_errors:
+ cls.ignore_errors[machine] = cls.ignore_errors[machine] \
+ + video_related
+
+ def getMachine(self):
+ return self.td.get('MACHINE', '')
+
+ def getWorkdir(self):
+ return self.td.get('WORKDIR', '')
+
+ # Get some information on the CPU of the machine to display at the
+ # beginning of the output. This info might be useful in some cases.
+ def getHardwareInfo(self):
+ hwi = ""
+ cmd = ('cat /proc/cpuinfo | grep "model name" | head -n1 | '
+ " awk 'BEGIN{FS=\":\"}{print $2}'")
+ _, cpu_name = self.target.run(cmd)
+
+ cmd = ('cat /proc/cpuinfo | grep "cpu cores" | head -n1 | '
+ "awk {'print $4'}")
+ _, cpu_physical_cores = self.target.run(cmd)
+
+ cmd = 'cat /proc/cpuinfo | grep "processor" | wc -l'
+ _, cpu_logical_cores = self.target.run(cmd)
+
+ _, cpu_arch = self.target.run('uname -m')
+
+ hwi += 'Machine information: \n'
+ hwi += '*******************************\n'
+ hwi += 'Machine name: ' + self.getMachine() + '\n'
+ hwi += 'CPU: ' + str(cpu_name) + '\n'
+ hwi += 'Arch: ' + str(cpu_arch)+ '\n'
+ hwi += 'Physical cores: ' + str(cpu_physical_cores) + '\n'
+ hwi += 'Logical cores: ' + str(cpu_logical_cores) + '\n'
+ hwi += '*******************************\n'
+
+ return hwi
+
+ # Go through the log locations provided and if it's a folder
+ # create a list with all the .log files in it, if it's a file
+ # just add it to that list.
+ def getLogList(self, log_locations):
+ logs = []
+ for location in log_locations:
+ status, _ = self.target.run('test -f ' + str(location))
+ if status == 0:
+ logs.append(str(location))
+ else:
+ status, _ = self.target.run('test -d ' + str(location))
+ if status == 0:
+ cmd = 'find ' + str(location) + '/*.log -maxdepth 1 -type f'
+ status, output = self.target.run(cmd)
+ if status == 0:
+ output = output.splitlines()
+ for logfile in output:
+ logs.append(os.path.join(location, str(logfile)))
+ return logs
+
+ # Copy the log files to be parsed locally
+ def transfer_logs(self, log_list):
+ workdir = self.getWorkdir()
+ self.target_logs = workdir + '/' + 'target_logs'
+ target_logs = self.target_logs
+ if os.path.exists(target_logs):
+ rmtree(self.target_logs)
+ os.makedirs(target_logs)
+ for f in log_list:
+ self.target.copyFrom(str(f), target_logs)
+
+ # Get the local list of logs
+ def get_local_log_list(self, log_locations):
+ self.transfer_logs(self.getLogList(log_locations))
+ list_dir = os.listdir(self.target_logs)
+ dir_files = [os.path.join(self.target_logs, f) for f in list_dir]
+ logs = [f for f in dir_files if os.path.isfile(f)]
+ return logs
+
+ # Build the grep command to be used with filters and exclusions
+ def build_grepcmd(self, errors, ignore_errors, log):
+ grepcmd = 'grep '
+ grepcmd += '-Ei "'
+ for error in errors:
+ grepcmd += error + '|'
+ grepcmd = grepcmd[:-1]
+ grepcmd += '" ' + str(log) + " | grep -Eiv \'"
+
+ try:
+ errorlist = ignore_errors[self.getMachine()]
+ except KeyError:
+ self.msg += 'No ignore list found for this machine, using default\n'
+ errorlist = ignore_errors['default']
+
+ for ignore_error in errorlist:
+ ignore_error = ignore_error.replace('(', '\(')
+ ignore_error = ignore_error.replace(')', '\)')
+ ignore_error = ignore_error.replace("'", '.')
+ ignore_error = ignore_error.replace('?', '\?')
+ ignore_error = ignore_error.replace('[', '\[')
+ ignore_error = ignore_error.replace(']', '\]')
+ ignore_error = ignore_error.replace('*', '\*')
+ ignore_error = ignore_error.replace('0-9', '[0-9]')
+ grepcmd += ignore_error + '|'
+ grepcmd = grepcmd[:-1]
+ grepcmd += "\'"
+
+ return grepcmd
+
+ # Grep only the errors so that their context could be collected.
+ # Default context is 10 lines before and after the error itself
+ def parse_logs(self, errors, ignore_errors, logs,
+ lines_before = 10, lines_after = 10):
+ results = {}
+ rez = []
+ grep_output = ''
+
+ for log in logs:
+ result = None
+ thegrep = self.build_grepcmd(errors, ignore_errors, log)
+
+ try:
+ result = check_output(thegrep, shell=True).decode('utf-8')
+ except:
+ pass
+
+ if result is not None:
+ results[log.replace('target_logs/','')] = {}
+ rez = result.splitlines()
+
+ for xrez in rez:
+ try:
+ cmd = ['grep', '-F', xrez, '-B', str(lines_before)]
+ cmd += ['-A', str(lines_after), log]
+ grep_output = check_output(cmd).decode('utf-8')
+ except:
+ pass
+ results[log.replace('target_logs/','')][xrez]=grep_output
+
+ return results
+
+ # Get the output of dmesg and write it in a file.
+ # This file is added to log_locations.
+ def write_dmesg(self):
+ (status, dmesg) = self.target.run('dmesg > /tmp/dmesg_output.log')
+
+ @OETestID(1059)
+ @OETestDepends(['ssh.SSHTest.test_ssh'])
+ def test_parselogs(self):
+ self.write_dmesg()
+ log_list = self.get_local_log_list(self.log_locations)
+ result = self.parse_logs(self.errors, self.ignore_errors, log_list)
+ print(self.getHardwareInfo())
+ errcount = 0
+ for log in result:
+ self.msg += 'Log: ' + log + '\n'
+ self.msg += '-----------------------\n'
+ for error in result[log]:
+ errcount += 1
+ self.msg += 'Central error: ' + str(error) + '\n'
+ self.msg += '***********************\n'
+ self.msg += result[str(log)][str(error)] + '\n'
+ self.msg += '***********************\n'
+ self.msg += '%s errors found in logs.' % errcount
+ self.assertEqual(errcount, 0, msg=self.msg)
diff --git a/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/perl.py b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/perl.py
new file mode 100644
index 0000000..d0b7e8e
--- /dev/null
+++ b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/perl.py
@@ -0,0 +1,37 @@
+import os
+
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.runtime.decorator.package import OEHasPackage
+
+class PerlTest(OERuntimeTestCase):
+
+ @classmethod
+ def setUpClass(cls):
+ src = os.path.join(cls.tc.files_dir, 'test.pl')
+ dst = '/tmp/test.pl'
+ cls.tc.target.copyTo(src, dst)
+
+ @classmethod
+ def tearDownClass(cls):
+ dst = '/tmp/test.pl'
+ cls.tc.target.run('rm %s' % dst)
+
+ @OETestID(1141)
+ @OETestDepends(['ssh.SSHTest.test_ssh'])
+ @OEHasPackage(['perl'])
+ def test_perl_exists(self):
+ status, output = self.target.run('which perl')
+ msg = 'Perl binary not in PATH or not on target.'
+ self.assertEqual(status, 0, msg=msg)
+
+ @OETestID(208)
+ @OETestDepends(['perl.PerlTest.test_perl_exists'])
+ def test_perl_works(self):
+ status, output = self.target.run('perl /tmp/test.pl')
+ msg = 'Exit status was not 0. Output: %s' % output
+ self.assertEqual(status, 0, msg=msg)
+
+ msg = 'Incorrect output: %s' % output
+ self.assertEqual(output, "the value of a is 0.01", msg=msg)
diff --git a/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/ping.py b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/ping.py
new file mode 100644
index 0000000..02f580a
--- /dev/null
+++ b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/ping.py
@@ -0,0 +1,24 @@
+from subprocess import Popen, PIPE
+
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.core.decorator.oetimeout import OETimeout
+
+class PingTest(OERuntimeTestCase):
+
+ @OETimeout(30)
+ @OETestID(964)
+ def test_ping(self):
+ output = ''
+ count = 0
+ while count < 5:
+ cmd = 'ping -c 1 %s' % self.target.ip
+ proc = Popen(cmd, shell=True, stdout=PIPE)
+ output += proc.communicate()[0].decode('utf-8')
+ if proc.poll() == 0:
+ count += 1
+ else:
+ count = 0
+ msg = ('Expected 5 consecutive, got %d.\n'
+ 'ping output is:\n%s' % (count,output))
+ self.assertEqual(count, 5, msg = msg)
diff --git a/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/python.py b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/python.py
new file mode 100644
index 0000000..bf3e179
--- /dev/null
+++ b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/python.py
@@ -0,0 +1,43 @@
+import os
+
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.runtime.decorator.package import OEHasPackage
+
+class PythonTest(OERuntimeTestCase):
+
+ @classmethod
+ def setUpClass(cls):
+ src = os.path.join(cls.tc.files_dir, 'test.py')
+ dst = '/tmp/test.py'
+ cls.tc.target.copyTo(src, dst)
+
+ @classmethod
+ def tearDownClass(cls):
+ dst = '/tmp/test.py'
+ cls.tc.target.run('rm %s' % dst)
+
+ @OETestID(1145)
+ @OETestDepends(['ssh.SSHTest.test_ssh'])
+ @OEHasPackage(['python-core'])
+ def test_python_exists(self):
+ status, output = self.target.run('which python')
+ msg = 'Python binary not in PATH or not on target.'
+ self.assertEqual(status, 0, msg=msg)
+
+ @OETestID(965)
+ @OETestDepends(['python.PythonTest.test_python_exists'])
+ def test_python_stdout(self):
+ status, output = self.target.run('python /tmp/test.py')
+ msg = 'Exit status was not 0. Output: %s' % output
+ self.assertEqual(status, 0, msg=msg)
+
+ msg = 'Incorrect output: %s' % output
+ self.assertEqual(output, "the value of a is 0.01", msg=msg)
+
+ @OETestID(1146)
+ @OETestDepends(['python.PythonTest.test_python_stdout'])
+ def test_python_testfile(self):
+ status, output = self.target.run('ls /tmp/testfile.python')
+ self.assertEqual(status, 0, msg='Python test file generate failed.')
diff --git a/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/rpm.py b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/rpm.py
new file mode 100644
index 0000000..05b94c7
--- /dev/null
+++ b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/rpm.py
@@ -0,0 +1,142 @@
+import os
+import fnmatch
+
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.core.decorator.data import skipIfDataVar
+from oeqa.runtime.decorator.package import OEHasPackage
+from oeqa.core.utils.path import findFile
+
+class RpmBasicTest(OERuntimeTestCase):
+
+ @classmethod
+ def setUpClass(cls):
+ if cls.tc.td['PACKAGE_CLASSES'].split()[0] != 'package_rpm':
+ cls.skipTest('Tests require image to be build from rpm')
+
+ @OETestID(960)
+ @OETestDepends(['ssh.SSHTest.test_ssh'])
+ def test_rpm_help(self):
+ status, output = self.target.run('rpm --help')
+ msg = 'status and output: %s and %s' % (status, output)
+ self.assertEqual(status, 0, msg=msg)
+
+ @OETestID(191)
+ @OETestDepends(['rpm.RpmBasicTest.test_rpm_help'])
+ def test_rpm_query(self):
+ status, output = self.target.run('rpm -q rpm')
+ msg = 'status and output: %s and %s' % (status, output)
+ self.assertEqual(status, 0, msg=msg)
+
+class RpmInstallRemoveTest(OERuntimeTestCase):
+
+ @classmethod
+ def setUpClass(cls):
+ if cls.tc.td['PACKAGE_CLASSES'].split()[0] != 'package_rpm':
+ cls.skipTest('Tests require image to be build from rpm')
+
+ pkgarch = cls.td['TUNE_PKGARCH'].replace('-', '_')
+ rpmdir = os.path.join(cls.tc.td['DEPLOY_DIR'], 'rpm', pkgarch)
+ # Pick rpm-doc as a test file to get installed, because it's small
+ # and it will always be built for standard targets
+ rpm_doc = 'rpm-doc-*.%s.rpm' % pkgarch
+ for f in fnmatch.filter(os.listdir(rpmdir), rpm_doc):
+ test_file = os.path.join(rpmdir, f)
+ dst = '/tmp/rpm-doc.rpm'
+ cls.tc.target.copyTo(test_file, dst)
+
+ @classmethod
+ def tearDownClass(cls):
+ dst = '/tmp/rpm-doc.rpm'
+ cls.tc.target.run('rm -f %s' % dst)
+
+ @OETestID(192)
+ @OETestDepends(['rpm.RpmBasicTest.test_rpm_help'])
+ def test_rpm_install(self):
+ status, output = self.target.run('rpm -ivh /tmp/rpm-doc.rpm')
+ msg = 'Failed to install rpm-doc package: %s' % output
+ self.assertEqual(status, 0, msg=msg)
+
+ @OETestID(194)
+ @OETestDepends(['rpm.RpmInstallRemoveTest.test_rpm_install'])
+ def test_rpm_remove(self):
+ status,output = self.target.run('rpm -e rpm-doc')
+ msg = 'Failed to remove rpm-doc package: %s' % output
+ self.assertEqual(status, 0, msg=msg)
+
+ @OETestID(1096)
+ @OETestDepends(['rpm.RpmBasicTest.test_rpm_query'])
+ def test_rpm_query_nonroot(self):
+
+ def set_up_test_user(u):
+ status, output = self.target.run('id -u %s' % u)
+ if status:
+ status, output = self.target.run('useradd %s' % u)
+ msg = 'Failed to create new user: %s' % output
+ self.assertTrue(status == 0, msg=msg)
+
+ def exec_as_test_user(u):
+ status, output = self.target.run('su -c id %s' % u)
+ msg = 'Failed to execute as new user'
+ self.assertTrue("({0})".format(u) in output, msg=msg)
+
+ status, output = self.target.run('su -c "rpm -qa" %s ' % u)
+ msg = 'status: %s. Cannot run rpm -qa: %s' % (status, output)
+ self.assertEqual(status, 0, msg=msg)
+
+ def unset_up_test_user(u):
+ status, output = self.target.run('userdel -r %s' % u)
+ msg = 'Failed to erase user: %s' % output
+ self.assertTrue(status == 0, msg=msg)
+
+ tuser = 'test1'
+
+ try:
+ set_up_test_user(tuser)
+ exec_as_test_user(tuser)
+ finally:
+ unset_up_test_user(tuser)
+
+ @OETestID(195)
+ @OETestDepends(['rpm.RpmInstallRemoveTest.test_rpm_remove'])
+ def test_check_rpm_install_removal_log_file_size(self):
+ """
+ Summary: Check that rpm writes into /var/log/messages
+ Expected: There should be some RPM prefixed entries in the above file.
+ Product: BSPs
+ Author: Alexandru Georgescu <alexandru.c.georgescu@intel.com>
+ Author: Alexander Kanavin <alexander.kanavin@intel.com>
+ AutomatedBy: Daniel Istrate <daniel.alexandrux.istrate@intel.com>
+ """
+ db_files_cmd = 'ls /var/lib/rpm/__db.*'
+ check_log_cmd = "grep RPM /var/log/messages | wc -l"
+
+ # Make sure that some database files are under /var/lib/rpm as '__db.xxx'
+ status, output = self.target.run(db_files_cmd)
+ msg = 'Failed to find database files under /var/lib/rpm/ as __db.xxx'
+ self.assertEqual(0, status, msg=msg)
+
+ # Remove the package just in case
+ self.target.run('rpm -e rpm-doc')
+
+ # Install/Remove a package 10 times
+ for i in range(10):
+ status, output = self.target.run('rpm -ivh /tmp/rpm-doc.rpm')
+ msg = 'Failed to install rpm-doc package. Reason: {}'.format(output)
+ self.assertEqual(0, status, msg=msg)
+
+ status, output = self.target.run('rpm -e rpm-doc')
+ msg = 'Failed to remove rpm-doc package. Reason: {}'.format(output)
+ self.assertEqual(0, status, msg=msg)
+
+ # if using systemd this should ensure all entries are flushed to /var
+ status, output = self.target.run("journalctl --sync")
+ # Get the amount of entries in the log file
+ status, output = self.target.run(check_log_cmd)
+ msg = 'Failed to get the final size of the log file.'
+ self.assertEqual(0, status, msg=msg)
+
+ # Check that there's enough of them
+ self.assertGreaterEqual(int(output), 80,
+ 'Cound not find sufficient amount of rpm entries in /var/log/messages, found {} entries'.format(output))
diff --git a/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/scanelf.py b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/scanelf.py
new file mode 100644
index 0000000..3ba1f78
--- /dev/null
+++ b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/scanelf.py
@@ -0,0 +1,26 @@
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.runtime.decorator.package import OEHasPackage
+
+class ScanelfTest(OERuntimeTestCase):
+ scancmd = 'scanelf --quiet --recursive --mount --ldpath --path'
+
+ @OETestID(966)
+ @OETestDepends(['ssh.SSHTest.test_ssh'])
+ @OEHasPackage(['pax-utils'])
+ def test_scanelf_textrel(self):
+ # print TEXTREL information
+ cmd = '%s --textrel' % self.scancmd
+ status, output = self.target.run(cmd)
+ msg = '\n'.join([cmd, output])
+ self.assertEqual(output.strip(), '', msg=msg)
+
+ @OETestID(967)
+ @OETestDepends(['scanelf.ScanelfTest.test_scanelf_textrel'])
+ def test_scanelf_rpath(self):
+ # print RPATH information
+ cmd = '%s --textrel --rpath' % self.scancmd
+ status, output = self.target.run(cmd)
+ msg = '\n'.join([cmd, output])
+ self.assertEqual(output.strip(), '', msg=msg)
diff --git a/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/scp.py b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/scp.py
new file mode 100644
index 0000000..f488a61
--- /dev/null
+++ b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/scp.py
@@ -0,0 +1,33 @@
+import os
+from tempfile import mkstemp
+
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+
+class ScpTest(OERuntimeTestCase):
+
+ @classmethod
+ def setUpClass(cls):
+ cls.tmp_fd, cls.tmp_path = mkstemp()
+ with os.fdopen(cls.tmp_fd, 'w') as f:
+ f.seek(2 ** 22 -1)
+ f.write(os.linesep)
+
+ @classmethod
+ def tearDownClass(cls):
+ os.remove(cls.tmp_path)
+
+ @OETestID(220)
+ @OETestDepends(['ssh.SSHTest.test_ssh'])
+ def test_scp_file(self):
+ dst = '/tmp/test_scp_file'
+
+ (status, output) = self.target.copyTo(self.tmp_path, dst)
+ msg = 'File could not be copied. Output: %s' % output
+ self.assertEqual(status, 0, msg=msg)
+
+ (status, output) = self.target.run('ls -la %s' % dst)
+ self.assertEqual(status, 0, msg = 'SCP test failed')
+
+ self.target.run('rm %s' % dst)
diff --git a/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/skeletoninit.py b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/skeletoninit.py
new file mode 100644
index 0000000..4fdcf03
--- /dev/null
+++ b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/skeletoninit.py
@@ -0,0 +1,33 @@
+# This test should cover https://bugzilla.yoctoproject.org/tr_show_case.cgi?case_id=284
+# testcase. Image under test must have meta-skeleton layer in bblayers and
+# IMAGE_INSTALL_append = " service" in local.conf
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.core.decorator.data import skipIfDataVar
+from oeqa.runtime.decorator.package import OEHasPackage
+
+class SkeletonBasicTest(OERuntimeTestCase):
+
+ @OETestDepends(['ssh.SSHTest.test_ssh'])
+ @OEHasPackage(['service'])
+ @skipIfDataVar('VIRTUAL-RUNTIME_init_manager', 'systemd',
+ 'Not appropiate for systemd image')
+ def test_skeleton_availability(self):
+ status, output = self.target.run('ls /etc/init.d/skeleton')
+ msg = 'skeleton init script not found. Output:\n%s' % output
+ self.assertEqual(status, 0, msg=msg)
+
+ status, output = self.target.run('ls /usr/sbin/skeleton-test')
+ msg = 'skeleton-test not found. Output:\n%s' % output
+ self.assertEqual(status, 0, msg=msg)
+
+ @OETestID(284)
+ @OETestDepends(['skeletoninit.SkeletonBasicTest.test_skeleton_availability'])
+ def test_skeleton_script(self):
+ output1 = self.target.run("/etc/init.d/skeleton start")[1]
+ cmd = '%s | grep [s]keleton-test' % self.tc.target_cmds['ps']
+ status, output2 = self.target.run(cmd)
+ msg = ('Skeleton script could not be started:'
+ '\n%s\n%s' % (output1, output2))
+ self.assertEqual(status, 0, msg=msg)
diff --git a/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/ssh.py b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/ssh.py
new file mode 100644
index 0000000..eca1679
--- /dev/null
+++ b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/ssh.py
@@ -0,0 +1,15 @@
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+
+class SSHTest(OERuntimeTestCase):
+
+ @OETestID(224)
+ @OETestDepends(['ping.PingTest.test_ping'])
+ def test_ssh(self):
+ (status, output) = self.target.run('uname -a')
+ self.assertEqual(status, 0, msg='SSH Test failed: %s' % output)
+ (status, output) = self.target.run('cat /etc/masterimage')
+ msg = "This isn't the right image - /etc/masterimage " \
+ "shouldn't be here %s" % output
+ self.assertEqual(status, 1, msg=msg)
diff --git a/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/systemd.py b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/systemd.py
new file mode 100644
index 0000000..db69384
--- /dev/null
+++ b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/systemd.py
@@ -0,0 +1,181 @@
+import re
+import time
+
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.core.decorator.data import skipIfDataVar, skipIfNotDataVar
+from oeqa.runtime.decorator.package import OEHasPackage
+from oeqa.core.decorator.data import skipIfNotFeature
+
+class SystemdTest(OERuntimeTestCase):
+
+ def systemctl(self, action='', target='', expected=0, verbose=False):
+ command = 'systemctl %s %s' % (action, target)
+ status, output = self.target.run(command)
+ message = '\n'.join([command, output])
+ if status != expected and verbose:
+ cmd = 'systemctl status --full %s' % target
+ message += self.target.run(cmd)[1]
+ self.assertEqual(status, expected, message)
+ return output
+
+ #TODO: use pyjournalctl instead
+ def journalctl(self, args='',l_match_units=None):
+ """
+ Request for the journalctl output to the current target system
+
+ Arguments:
+ -args, an optional argument pass through argument
+ -l_match_units, an optional list of units to filter the output
+ Returns:
+ -string output of the journalctl command
+ Raises:
+ -AssertionError, on remote commands that fail
+ -ValueError, on a journalctl call with filtering by l_match_units that
+ returned no entries
+ """
+
+ query_units=''
+ if l_match_units:
+ query_units = ['_SYSTEMD_UNIT='+unit for unit in l_match_units]
+ query_units = ' '.join(query_units)
+ command = 'journalctl %s %s' %(args, query_units)
+ status, output = self.target.run(command)
+ if status:
+ raise AssertionError("Command '%s' returned non-zero exit "
+ 'code %d:\n%s' % (command, status, output))
+ if len(output) == 1 and "-- No entries --" in output:
+ raise ValueError('List of units to match: %s, returned no entries'
+ % l_match_units)
+ return output
+
+class SystemdBasicTests(SystemdTest):
+
+ def settle(self):
+ """
+ Block until systemd has finished activating any units being activated,
+ or until two minutes has elapsed.
+
+ Returns a tuple, either (True, '') if all units have finished
+ activating, or (False, message string) if there are still units
+ activating (generally, failing units that restart).
+ """
+ endtime = time.time() + (60 * 2)
+ while True:
+ status, output = self.target.run('systemctl --state=activating')
+ if "0 loaded units listed" in output:
+ return (True, '')
+ if time.time() >= endtime:
+ return (False, output)
+ time.sleep(10)
+
+ @skipIfNotFeature('systemd',
+ 'Test requires systemd to be in DISTRO_FEATURES')
+ @skipIfNotDataVar('VIRTUAL-RUNTIME_init_manager', 'systemd',
+ 'systemd is not the init manager for this image')
+ @OETestDepends(['ssh.SSHTest.test_ssh'])
+ def test_systemd_basic(self):
+ self.systemctl('--version')
+
+ @OETestID(551)
+ @OETestDepends(['systemd.SystemdBasicTests.test_systemd_basic'])
+ def test_systemd_list(self):
+ self.systemctl('list-unit-files')
+
+ @OETestID(550)
+ @OETestDepends(['systemd.SystemdBasicTests.test_systemd_basic'])
+ def test_systemd_failed(self):
+ settled, output = self.settle()
+ msg = "Timed out waiting for systemd to settle:\n%s" % output
+ self.assertTrue(settled, msg=msg)
+
+ output = self.systemctl('list-units', '--failed')
+ match = re.search('0 loaded units listed', output)
+ if not match:
+ output += self.systemctl('status --full --failed')
+ self.assertTrue(match, msg='Some systemd units failed:\n%s' % output)
+
+
+class SystemdServiceTests(SystemdTest):
+
+ @OEHasPackage(['avahi-daemon'])
+ @OETestDepends(['systemd.SystemdBasicTests.test_systemd_basic'])
+ def test_systemd_status(self):
+ self.systemctl('status --full', 'avahi-daemon.service')
+
+ @OETestID(695)
+ @OETestDepends(['systemd.SystemdServiceTests.test_systemd_status'])
+ def test_systemd_stop_start(self):
+ self.systemctl('stop', 'avahi-daemon.service')
+ self.systemctl('is-active', 'avahi-daemon.service',
+ expected=3, verbose=True)
+ self.systemctl('start','avahi-daemon.service')
+ self.systemctl('is-active', 'avahi-daemon.service', verbose=True)
+
+ @OETestID(696)
+ @OETestDepends(['systemd.SystemdServiceTests.test_systemd_status'])
+ def test_systemd_disable_enable(self):
+ self.systemctl('disable', 'avahi-daemon.service')
+ self.systemctl('is-enabled', 'avahi-daemon.service', expected=1)
+ self.systemctl('enable', 'avahi-daemon.service')
+ self.systemctl('is-enabled', 'avahi-daemon.service')
+
+class SystemdJournalTests(SystemdTest):
+
+ @OETestDepends(['systemd.SystemdBasicTests.test_systemd_basic'])
+ def test_systemd_journal(self):
+ status, output = self.target.run('journalctl')
+ self.assertEqual(status, 0, output)
+
+ @OETestDepends(['systemd.SystemdBasicTests.test_systemd_basic'])
+ def test_systemd_boot_time(self, systemd_TimeoutStartSec=90):
+ """
+ Get the target boot time from journalctl and log it
+
+ Arguments:
+ -systemd_TimeoutStartSec, an optional argument containing systemd's
+ unit start timeout to compare against
+ """
+
+ # The expression chain that uniquely identifies the time boot message.
+ expr_items=['Startup finished', 'kernel', 'userspace','\.$']
+ try:
+ output = self.journalctl(args='-o cat --reverse')
+ except AssertionError:
+ self.fail('Error occurred while calling journalctl')
+ if not len(output):
+ self.fail('Error, unable to get startup time from systemd journal')
+
+ # Check for the regular expression items that match the startup time.
+ for line in output.split('\n'):
+ check_match = ''.join(re.findall('.*'.join(expr_items), line))
+ if check_match:
+ break
+ # Put the startup time in the test log
+ if check_match:
+ self.tc.logger.info('%s' % check_match)
+ else:
+ self.skipTest('Error at obtaining the boot time from journalctl')
+ boot_time_sec = 0
+
+ # Get the numeric values from the string and convert them to seconds
+ # same data will be placed in list and string for manipulation.
+ l_boot_time = check_match.split(' ')[-2:]
+ s_boot_time = ' '.join(l_boot_time)
+ try:
+ # Obtain the minutes it took to boot.
+ if l_boot_time[0].endswith('min') and l_boot_time[0][0].isdigit():
+ boot_time_min = s_boot_time.split('min')[0]
+ # Convert to seconds and accumulate it.
+ boot_time_sec += int(boot_time_min) * 60
+ # Obtain the seconds it took to boot and accumulate.
+ boot_time_sec += float(l_boot_time[1].split('s')[0])
+ except ValueError:
+ self.skipTest('Error when parsing time from boot string')
+
+ # Assert the target boot time against systemd's unit start timeout.
+ if boot_time_sec > systemd_TimeoutStartSec:
+ msg = ("Target boot time %s exceeds systemd's TimeoutStartSec %s"
+ % (boot_time_sec, systemd_TimeoutStartSec))
+ self.tc.logger.info(msg)
diff --git a/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/x32lib.py b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/x32lib.py
new file mode 100644
index 0000000..8da0154
--- /dev/null
+++ b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/x32lib.py
@@ -0,0 +1,19 @@
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.core.decorator.data import skipIfNotInDataVar
+
+class X32libTest(OERuntimeTestCase):
+
+ @skipIfNotInDataVar('DEFAULTTUNE', 'x86-64-x32',
+ 'DEFAULTTUNE is not set to x86-64-x32')
+ @OETestID(281)
+ @OETestDepends(['ssh.SSHTest.test_ssh'])
+ def test_x32_file(self):
+ cmd = 'readelf -h /bin/ls | grep Class | grep ELF32'
+ status1 = self.target.run(cmd)[0]
+ cmd = 'readelf -h /bin/ls | grep Machine | grep X86-64'
+ status2 = self.target.run(cmd)[0]
+ msg = ("/bin/ls isn't an X86-64 ELF32 binary. readelf says: %s" %
+ self.target.run("readelf -h /bin/ls")[1])
+ self.assertTrue(status1 == 0 and status2 == 0, msg=msg)
diff --git a/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/xorg.py b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/xorg.py
new file mode 100644
index 0000000..2124813
--- /dev/null
+++ b/import-layers/yocto-poky/meta/lib/oeqa/runtime/cases/xorg.py
@@ -0,0 +1,17 @@
+from oeqa.runtime.case import OERuntimeTestCase
+from oeqa.core.decorator.depends import OETestDepends
+from oeqa.core.decorator.oeid import OETestID
+from oeqa.core.decorator.data import skipIfNotFeature
+
+class XorgTest(OERuntimeTestCase):
+
+ @OETestID(1151)
+ @skipIfNotFeature('x11-base',
+ 'Test requires x11 to be in IMAGE_FEATURES')
+ @OETestDepends(['ssh.SSHTest.test_ssh'])
+ def test_xorg_running(self):
+ cmd ='%s | grep -v xinit | grep [X]org' % self.tc.target_cmds['ps']
+ status, output = self.target.run(cmd)
+ msg = ('Xorg does not appear to be running %s' %
+ self.target.run(self.tc.target_cmds['ps'])[1])
+ self.assertEqual(status, 0, msg=msg)