blob: a7a762cd0d0af4dec2e6313026fe76a836b65e64 [file] [log] [blame]
include conf/machine/include/rpi-default-settings.inc
include conf/machine/include/rpi-default-versions.inc
include conf/machine/include/rpi-default-providers.inc
SOC_FAMILY = "rpi"
include conf/machine/include/soc-family.inc
IMAGE_FSTYPES ?= "tar.bz2 ext3 wic.bz2 wic.bmap"
WKS_FILE ?= "sdimage-raspberrypi.wks"
XSERVER = " \
xserver-xorg \
${@bb.utils.contains("MACHINE_FEATURES", "vc4graphics", "xserver-xorg-extension-glx", "", d)} \
${@bb.utils.contains("MACHINE_FEATURES", "vc4graphics", "xf86-video-modesetting", "xf86-video-fbdev", d)} \
"
RPI_KERNEL_DEVICETREE_OVERLAYS ?= " \
overlays/overlay_map.dtb \
overlays/at86rf233.dtbo \
overlays/disable-bt.dtbo \
overlays/dwc2.dtbo \
overlays/gpio-ir.dtbo \
overlays/gpio-ir-tx.dtbo \
overlays/gpio-key.dtbo \
overlays/gpio-poweroff.dtbo \
overlays/gpio-shutdown.dtbo \
overlays/hifiberry-amp.dtbo \
overlays/hifiberry-dac.dtbo \
overlays/hifiberry-dacplus.dtbo \
overlays/hifiberry-digi.dtbo \
overlays/justboom-both.dtbo \
overlays/justboom-dac.dtbo \
overlays/justboom-digi.dtbo \
overlays/i2c-gpio.dtbo \
overlays/i2c-rtc.dtbo \
overlays/imx219.dtbo \
overlays/imx477.dtbo \
overlays/iqaudio-dac.dtbo \
overlays/iqaudio-dacplus.dtbo \
overlays/mcp2515-can0.dtbo \
overlays/mcp2515-can1.dtbo \
overlays/miniuart-bt.dtbo \
overlays/pitft22.dtbo \
overlays/pitft28-capacitive.dtbo \
overlays/pitft28-resistive.dtbo \
overlays/pitft35-resistive.dtbo \
overlays/pps-gpio.dtbo \
overlays/rpi-ft5406.dtbo \
overlays/rpi-poe.dtbo \
overlays/vc4-fkms-v3d.dtbo \
overlays/vc4-fkms-v3d-pi4.dtbo \
overlays/vc4-kms-v3d.dtbo \
overlays/vc4-kms-v3d-pi4.dtbo \
overlays/vc4-kms-dsi-7inch.dtbo \
overlays/w1-gpio.dtbo \
overlays/w1-gpio-pullup.dtbo \
overlays/wm8960-soundcard.dtbo \
"
RPI_KERNEL_DEVICETREE ?= " \
bcm2708-rpi-zero.dtb \
bcm2708-rpi-zero-w.dtb \
bcm2708-rpi-b.dtb \
bcm2708-rpi-b-rev1.dtb \
bcm2708-rpi-b-plus.dtb \
bcm2709-rpi-2-b.dtb \
bcm2710-rpi-2-b.dtb \
bcm2710-rpi-3-b.dtb \
bcm2710-rpi-3-b-plus.dtb \
bcm2711-rpi-4-b.dtb \
bcm2711-rpi-400.dtb \
bcm2708-rpi-cm.dtb \
bcm2710-rpi-cm3.dtb \
bcm2711-rpi-cm4.dtb \
"
KERNEL_DEVICETREE ??= " \
${RPI_KERNEL_DEVICETREE} \
${RPI_KERNEL_DEVICETREE_OVERLAYS} \
"
# By default:
#
# * When u-boot is disabled use the "Image" format which can be directly loaded
# by the rpi firmware.
#
# * When u-boot is enabled use the "uImage" format and the "bootm" command
# within u-boot to load the kernel.
KERNEL_BOOTCMD ??= "bootm"
KERNEL_IMAGETYPE_UBOOT ??= "uImage"
KERNEL_IMAGETYPE_DIRECT ??= "zImage"
KERNEL_IMAGETYPE ?= "${@bb.utils.contains('RPI_USE_U_BOOT', '1', \
'${KERNEL_IMAGETYPE_UBOOT}', '${KERNEL_IMAGETYPE_DIRECT}', d)}"
MACHINE_FEATURES += "apm usbhost keyboard vfat ext2 screen touchscreen alsa bluetooth wifi sdio ${@bb.utils.contains('DISABLE_VC4GRAPHICS', '1', '', 'vc4graphics', d)}"
# Raspberry Pi has no hardware clock
MACHINE_FEATURES_BACKFILL_CONSIDERED = "rtc"
MACHINE_EXTRA_RRECOMMENDS += "kernel-modules udev-rules-rpi"
MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += "${@oe.utils.conditional('ENABLE_I2C', '1', 'kernel-module-i2c-dev kernel-module-i2c-bcm2708', '', d)}"
MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += "${@oe.utils.conditional('ENABLE_IR', '1', 'kernel-module-gpio-ir kernel-module-gpio-ir-tx', '', d)}"
MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += "${@oe.utils.conditional('ENABLE_GPIO_SHUTDOWN', '1', 'gpio-shutdown kernel-module-gpio-keys', '', d)}"
SERIAL_CONSOLES_CHECK ??= "${SERIAL_CONSOLES}"
# The name of the deploy directory for raspberry pi boot files.
# This variable is referred to by recipes fetching / generating the files.
BOOTFILES_DIR_NAME ?= "bootfiles"
# Set Raspberrypi splash image
SPLASH ?= "psplash-raspberrypi"
def make_dtb_boot_files(d):
# Generate IMAGE_BOOT_FILES entries for device tree files listed in
# KERNEL_DEVICETREE.
alldtbs = d.getVar('KERNEL_DEVICETREE')
imgtyp = d.getVar('KERNEL_IMAGETYPE')
def transform(dtb):
base = os.path.basename(dtb)
if dtb.endswith('dtbo') or base == 'overlay_map.dtb':
# overlay dtb:
# eg: overlays/hifiberry-amp.dtbo has:
# DEPLOYDIR file: hifiberry-amp.dtbo
# destination: overlays/hifiberry-amp.dtbo
return '{};{}'.format(base, dtb)
elif dtb.endswith('dtb'):
# eg: whatever/bcm2708-rpi-b.dtb has:
# DEPLOYDIR file: bcm2708-rpi-b.dtb
# destination: bcm2708-rpi-b.dtb
return base
return ' '.join([transform(dtb) for dtb in alldtbs.split(' ') if dtb])
IMAGE_BOOT_FILES ?= "${BOOTFILES_DIR_NAME}/* \
${@make_dtb_boot_files(d)} \
${@bb.utils.contains('RPI_USE_U_BOOT', '1', \
'${KERNEL_IMAGETYPE} u-boot.bin;${SDIMG_KERNELIMAGE} boot.scr', \
'${KERNEL_IMAGETYPE};${SDIMG_KERNELIMAGE}', d)} \
"
do_image_wic[depends] += " \
rpi-bootfiles:do_deploy \
${@bb.utils.contains('RPI_USE_U_BOOT', '1', 'u-boot:do_deploy', '',d)} \
"
do_image_wic[recrdeps] = "do_build"
# The kernel image is installed into the FAT32 boot partition and does not need
# to also be installed into the rootfs.
RDEPENDS:${KERNEL_PACKAGE_NAME}-base = ""