blob: 67fa590903347d5302baf51e8b505a037f536bec [file] [log] [blame]
From 6e9a19c43acac7d4254910906329d98d7b59085a Mon Sep 17 00:00:00 2001
From: Ren Yu <yux.ren@intel.com>
Date: Fri, 24 May 2019 14:55:10 +0800
Subject: [PATCH] Add the pre-timeout interrupt defined in IPMI spec
The IPMI watchdog pre-timeout interrupt is used to set the different
pre-timeout interrupt source. Add them as a dbus property,
IPMI set/get watchdog commands will use it.
Signed-off-by: Ren Yu <yux.ren@intel.com>
---
xyz/openbmc_project/State/Watchdog.interface.yaml | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/xyz/openbmc_project/State/Watchdog.interface.yaml b/xyz/openbmc_project/State/Watchdog.interface.yaml
index 2fc47d8..6dfa9b9 100644
--- a/xyz/openbmc_project/State/Watchdog.interface.yaml
+++ b/xyz/openbmc_project/State/Watchdog.interface.yaml
@@ -33,6 +33,11 @@ properties:
description: >
The action the watchdog should perform when it expires.
default: 'HardReset'
+ - name: PreTimeoutInterrupt
+ type: enum[self.PreTimeoutInterruptAction]
+ description: >
+ The BMC generates the selected interrupt before the timer expires.
+ default: 'None'
- name: Interval
type: uint64
description: >
@@ -73,6 +78,23 @@ enumerations:
description: >
Perform a power cycle of the system.
+ - name: PreTimeoutInterruptAction
+ description: >
+ The type of PreTimeout Interrupt.
+ values:
+ - name: 'None'
+ description: >
+ Do nothing.
+ - name: 'SMI'
+ description: >
+ SMI.
+ - name: 'NMI'
+ description: >
+ NMI / Diagnostic Interrupt.
+ - name: 'MI'
+ description: >
+ Messaging Interrupt.
+
- name: TimerUse
description: >
The type of timer use.
--
2.7.4