From afe880f500cff7a9486379c5ad7a4f3379015a62 Mon Sep 17 00:00:00 2001
From: Jaewon Lee <jaewon.lee@xilinx.com>
Date: Mon, 14 Jan 2019 11:30:56 -0800
Subject: [PATCH] kc705-microblazeel: Convert microblaze-generic to
 kc705-microblazeel

This is an update to earlier kc705-trd patch done by Nathan Rossi.

Change the microblaze-generic board to match the kc705-microblazeel.
This patch is not intended for upstream and serves as an intermediate
solution until OF support in upstream u-boot allows for easy support for
custom microblaze boards.

Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
Upstream-Status: Not-Upstreamable [meta-xilinx/kc705 specific]
---
 arch/microblaze/dts/microblaze-generic.dts | 590 ++++++++++++++++++++++++++++-
 board/xilinx/microblaze-generic/config.mk  |  28 +-
 configs/microblaze-generic_defconfig       |  75 ++--
 include/configs/microblaze-generic.h       | 348 ++++++++---------
 4 files changed, 782 insertions(+), 259 deletions(-)

diff --git a/arch/microblaze/dts/microblaze-generic.dts b/arch/microblaze/dts/microblaze-generic.dts
index 08a1396..f8e616b 100644
--- a/arch/microblaze/dts/microblaze-generic.dts
+++ b/arch/microblaze/dts/microblaze-generic.dts
@@ -1,9 +1,587 @@
 /dts-v1/;
+
 / {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	aliases {
-	} ;
+	#address-cells = <0x1>;
+	#size-cells = <0x1>;
+	compatible = "xlnx,microblaze";
+	model = "Xilinx MicroBlaze";
+	hard-reset-gpios = <0x1 0x0 0x1>;
+
+	cpus {
+		#address-cells = <0x1>;
+		#cpus = <0x1>;
+		#size-cells = <0x0>;
+
+		cpu@0 {
+			bus-handle = <0x2>;
+			clock-frequency = <0xbebc200>;
+			clocks = <0x3>;
+			compatible = "xlnx,microblaze-10.0";
+			d-cache-baseaddr = <0x80000000>;
+			d-cache-highaddr = <0xbfffffff>;
+			d-cache-line-size = <0x20>;
+			d-cache-size = <0x4000>;
+			device_type = "cpu";
+			i-cache-baseaddr = <0x80000000>;
+			i-cache-highaddr = <0xbfffffff>;
+			i-cache-line-size = <0x10>;
+			i-cache-size = <0x4000>;
+			interrupt-handle = <0x4>;
+			model = "microblaze,10.0";
+			timebase-frequency = <0xbebc200>;
+			xlnx,addr-size = <0x20>;
+			xlnx,addr-tag-bits = <0x10>;
+			xlnx,allow-dcache-wr = <0x1>;
+			xlnx,allow-icache-wr = <0x1>;
+			xlnx,area-optimized = <0x0>;
+			xlnx,async-interrupt = <0x1>;
+			xlnx,async-wakeup = <0x3>;
+			xlnx,avoid-primitives = <0x0>;
+			xlnx,base-vectors = <0x0>;
+			xlnx,branch-target-cache-size = <0x0>;
+			xlnx,cache-byte-size = <0x4000>;
+			xlnx,d-axi = <0x1>;
+			xlnx,d-lmb = <0x1>;
+			xlnx,d-lmb-mon = <0x0>;
+			xlnx,daddr-size = <0x20>;
+			xlnx,data-size = <0x20>;
+			xlnx,dc-axi-mon = <0x0>;
+			xlnx,dcache-addr-tag = <0x10>;
+			xlnx,dcache-always-used = <0x1>;
+			xlnx,dcache-byte-size = <0x4000>;
+			xlnx,dcache-data-width = <0x0>;
+			xlnx,dcache-force-tag-lutram = <0x0>;
+			xlnx,dcache-line-len = <0x8>;
+			xlnx,dcache-use-writeback = <0x0>;
+			xlnx,dcache-victims = <0x0>;
+			xlnx,debug-counter-width = <0x20>;
+			xlnx,debug-enabled = <0x1>;
+			xlnx,debug-event-counters = <0x5>;
+			xlnx,debug-external-trace = <0x0>;
+			xlnx,debug-interface = <0x0>;
+			xlnx,debug-latency-counters = <0x1>;
+			xlnx,debug-profile-size = <0x0>;
+			xlnx,debug-trace-async-reset = <0x0>;
+			xlnx,debug-trace-size = <0x2000>;
+			xlnx,div-zero-exception = <0x1>;
+			xlnx,dp-axi-mon = <0x0>;
+			xlnx,dynamic-bus-sizing = <0x0>;
+			xlnx,ecc-use-ce-exception = <0x0>;
+			xlnx,edge-is-positive = <0x1>;
+			xlnx,enable-discrete-ports = <0x0>;
+			xlnx,endianness = <0x1>;
+			xlnx,fault-tolerant = <0x0>;
+			xlnx,fpu-exception = <0x0>;
+			xlnx,freq = <0xbebc200>;
+			xlnx,fsl-exception = <0x0>;
+			xlnx,fsl-links = <0x0>;
+			xlnx,i-axi = <0x0>;
+			xlnx,i-lmb = <0x1>;
+			xlnx,i-lmb-mon = <0x0>;
+			xlnx,iaddr-size = <0x20>;
+			xlnx,ic-axi-mon = <0x0>;
+			xlnx,icache-always-used = <0x1>;
+			xlnx,icache-data-width = <0x0>;
+			xlnx,icache-force-tag-lutram = <0x0>;
+			xlnx,icache-line-len = <0x4>;
+			xlnx,icache-streams = <0x1>;
+			xlnx,icache-victims = <0x8>;
+			xlnx,ill-opcode-exception = <0x1>;
+			xlnx,imprecise-exceptions = <0x0>;
+			xlnx,instr-size = <0x20>;
+			xlnx,interconnect = <0x2>;
+			xlnx,interrupt-is-edge = <0x0>;
+			xlnx,interrupt-mon = <0x0>;
+			xlnx,ip-axi-mon = <0x0>;
+			xlnx,lockstep-master = <0x0>;
+			xlnx,lockstep-select = <0x0>;
+			xlnx,lockstep-slave = <0x0>;
+			xlnx,mmu-dtlb-size = <0x4>;
+			xlnx,mmu-itlb-size = <0x2>;
+			xlnx,mmu-privileged-instr = <0x0>;
+			xlnx,mmu-tlb-access = <0x3>;
+			xlnx,mmu-zones = <0x2>;
+			xlnx,num-sync-ff-clk = <0x2>;
+			xlnx,num-sync-ff-clk-debug = <0x2>;
+			xlnx,num-sync-ff-clk-irq = <0x1>;
+			xlnx,num-sync-ff-dbg-clk = <0x1>;
+			xlnx,num-sync-ff-dbg-trace-clk = <0x2>;
+			xlnx,number-of-pc-brk = <0x1>;
+			xlnx,number-of-rd-addr-brk = <0x0>;
+			xlnx,number-of-wr-addr-brk = <0x0>;
+			xlnx,opcode-0x0-illegal = <0x1>;
+			xlnx,optimization = <0x0>;
+			xlnx,pc-width = <0x20>;
+			xlnx,piaddr-size = <0x20>;
+			xlnx,pvr = <0x2>;
+			xlnx,pvr-user1 = <0x0>;
+			xlnx,pvr-user2 = <0x0>;
+			xlnx,reset-msr = <0x0>;
+			xlnx,reset-msr-bip = <0x0>;
+			xlnx,reset-msr-dce = <0x0>;
+			xlnx,reset-msr-ee = <0x0>;
+			xlnx,reset-msr-eip = <0x0>;
+			xlnx,reset-msr-ice = <0x0>;
+			xlnx,reset-msr-ie = <0x0>;
+			xlnx,sco = <0x0>;
+			xlnx,trace = <0x0>;
+			xlnx,unaligned-exceptions = <0x1>;
+			xlnx,use-barrel = <0x1>;
+			xlnx,use-branch-target-cache = <0x0>;
+			xlnx,use-config-reset = <0x0>;
+			xlnx,use-dcache = <0x1>;
+			xlnx,use-div = <0x1>;
+			xlnx,use-ext-brk = <0x0>;
+			xlnx,use-ext-nm-brk = <0x0>;
+			xlnx,use-extended-fsl-instr = <0x0>;
+			xlnx,use-fpu = <0x0>;
+			xlnx,use-hw-mul = <0x2>;
+			xlnx,use-icache = <0x1>;
+			xlnx,use-interrupt = <0x2>;
+			xlnx,use-mmu = <0x3>;
+			xlnx,use-msr-instr = <0x1>;
+			xlnx,use-non-secure = <0x0>;
+			xlnx,use-pcmp-instr = <0x1>;
+			xlnx,use-reorder-instr = <0x1>;
+			xlnx,use-stack-protection = <0x0>;
+		};
+	};
+
+	clocks {
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+
+		clk_cpu@0 {
+			#clock-cells = <0x0>;
+			clock-frequency = <0xbebc200>;
+			clock-output-names = "clk_cpu";
+			compatible = "fixed-clock";
+			reg = <0x0>;
+			linux,phandle = <0x3>;
+			phandle = <0x3>;
+		};
+
+		clk_bus_0@1 {
+			#clock-cells = <0x0>;
+			clock-frequency = <0xbebc200>;
+			clock-output-names = "clk_bus_0";
+			compatible = "fixed-clock";
+			reg = <0x1>;
+			linux,phandle = <0x8>;
+			phandle = <0x8>;
+		};
+	};
+
+	amba_pl {
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		compatible = "simple-bus";
+		ranges;
+		linux,phandle = <0x2>;
+		phandle = <0x2>;
+
+		ethernet@40c00000 {
+			axistream-connected = <0x5>;
+			axistream-control-connected = <0x5>;
+			clock-frequency = <0x5f5e100>;
+			compatible = "xlnx,axi-ethernet-1.00.a";
+			device_type = "network";
+			interrupt-names = "interrupt";
+			interrupt-parent = <0x4>;
+			interrupts = <0x4 0x2>;
+			phy-mode = "gmii";
+			reg = <0x40c00000 0x40000>;
+			xlnx = <0x0>;
+			xlnx,axiliteclkrate = <0x0>;
+			xlnx,axisclkrate = <0x0>;
+			xlnx,clockselection = <0x0>;
+			xlnx,enableasyncsgmii = <0x0>;
+			xlnx,gt-type = <0x0>;
+			xlnx,gtinex = <0x0>;
+			xlnx,gtlocation = <0x0>;
+			xlnx,gtrefclksrc = <0x0>;
+			xlnx,include-dre;
+			xlnx,instantiatebitslice0 = <0x0>;
+			xlnx,phy-type = <0x1>;
+			xlnx,phyaddr = <0x1>;
+			xlnx,rable = <0x0>;
+			xlnx,rxcsum = <0x0>;
+			xlnx,rxlane0-placement = <0x0>;
+			xlnx,rxlane1-placement = <0x0>;
+			xlnx,rxmem = <0x1000>;
+			xlnx,rxnibblebitslice0used = <0x0>;
+			xlnx,tx-in-upper-nibble = <0x1>;
+			xlnx,txcsum = <0x0>;
+			xlnx,txlane0-placement = <0x0>;
+			xlnx,txlane1-placement = <0x0>;
+			phy-handle = <0x6>;
+			local-mac-address = [00 0a 35 00 22 01];
+			linux,phandle = <0x7>;
+			phandle = <0x7>;
+
+			mdio {
+				#address-cells = <0x1>;
+				#size-cells = <0x0>;
+
+				phy@7 {
+					device_type = "ethernet-phy";
+					reg = <0x7>;
+					linux,phandle = <0x6>;
+					phandle = <0x6>;
+				};
+			};
+		};
+
+		dma@41e00000 {
+			#dma-cells = <0x1>;
+			axistream-connected = <0x7>;
+			axistream-control-connected = <0x7>;
+			clock-frequency = <0xbebc200>;
+			clock-names = "s_axi_lite_aclk";
+			clocks = <0x8>;
+			compatible = "xlnx,eth-dma";
+			interrupt-names = "mm2s_introut", "s2mm_introut";
+			interrupt-parent = <0x4>;
+			interrupts = <0x3 0x2 0x2 0x2>;
+			reg = <0x41e00000 0x10000>;
+			xlnx,include-dre;
+			linux,phandle = <0x5>;
+			phandle = <0x5>;
+		};
+
+		timer@41c00000 {
+			clock-frequency = <0xbebc200>;
+			clocks = <0x8>;
+			compatible = "xlnx,xps-timer-1.00.a";
+			interrupt-names = "interrupt";
+			interrupt-parent = <0x4>;
+			interrupts = <0x5 0x2>;
+			reg = <0x41c00000 0x10000>;
+			xlnx,count-width = <0x20>;
+			xlnx,gen0-assert = <0x1>;
+			xlnx,gen1-assert = <0x1>;
+			xlnx,one-timer-only = <0x0>;
+			xlnx,trig0-assert = <0x1>;
+			xlnx,trig1-assert = <0x1>;
+		};
+
+		gpio@40010000 {
+			#gpio-cells = <0x2>;
+			clock-frequency = <0xbebc200>;
+			clock-names = "s_axi_aclk";
+			clocks = <0x8>;
+			compatible = "xlnx,xps-gpio-1.00.a";
+			gpio-controller;
+			reg = <0x40010000 0x10000>;
+			xlnx,all-inputs = <0x1>;
+			xlnx,all-inputs-2 = <0x0>;
+			xlnx,all-outputs = <0x0>;
+			xlnx,all-outputs-2 = <0x0>;
+			xlnx,dout-default = <0x0>;
+			xlnx,dout-default-2 = <0x0>;
+			xlnx,gpio-width = <0x1>;
+			xlnx,gpio2-width = <0x20>;
+			xlnx,interrupt-present = <0x0>;
+			xlnx,is-dual = <0x0>;
+			xlnx,tri-default = <0xffffffff>;
+			xlnx,tri-default-2 = <0xffffffff>;
+		};
+
+		gpio@40020000 {
+			#gpio-cells = <0x2>;
+			clock-frequency = <0xbebc200>;
+			clock-names = "s_axi_aclk";
+			clocks = <0x8>;
+			compatible = "xlnx,xps-gpio-1.00.a";
+			gpio-controller;
+			reg = <0x40020000 0x10000>;
+			xlnx,all-inputs = <0x1>;
+			xlnx,all-inputs-2 = <0x0>;
+			xlnx,all-outputs = <0x0>;
+			xlnx,all-outputs-2 = <0x0>;
+			xlnx,dout-default = <0x0>;
+			xlnx,dout-default-2 = <0x0>;
+			xlnx,gpio-width = <0x4>;
+			xlnx,gpio2-width = <0x20>;
+			xlnx,interrupt-present = <0x0>;
+			xlnx,is-dual = <0x0>;
+			xlnx,tri-default = <0xffffffff>;
+			xlnx,tri-default-2 = <0xffffffff>;
+		};
+
+		i2c@40800000 {
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			clock-frequency = <0xbebc200>;
+			clocks = <0x8>;
+			compatible = "xlnx,xps-iic-2.00.a";
+			interrupt-names = "iic2intc_irpt";
+			interrupt-parent = <0x4>;
+			interrupts = <0x1 0x2>;
+			reg = <0x40800000 0x10000>;
+
+			i2cswitch@74 {
+				compatible = "nxp,pca9548";
+				#address-cells = <0x1>;
+				#size-cells = <0x0>;
+				reg = <0x74>;
+
+				i2c@0 {
+					#address-cells = <0x1>;
+					#size-cells = <0x0>;
+					reg = <0x0>;
+
+					clock-generator@5d {
+						#clock-cells = <0x0>;
+						compatible = "silabs,si570";
+						temperature-stability = <0x32>;
+						reg = <0x5d>;
+						factory-fout = <0x9502f90>;
+						clock-frequency = <0x8d9ee20>;
+					};
+				};
+
+				i2c@3 {
+					#address-cells = <0x1>;
+					#size-cells = <0x0>;
+					reg = <0x3>;
+
+					eeprom@54 {
+						compatible = "at,24c08";
+						reg = <0x54>;
+					};
+				};
+			};
+		};
+
+		gpio@40030000 {
+			#gpio-cells = <0x2>;
+			clock-frequency = <0xbebc200>;
+			clock-names = "s_axi_aclk";
+			clocks = <0x8>;
+			compatible = "xlnx,xps-gpio-1.00.a";
+			gpio-controller;
+			reg = <0x40030000 0x10000>;
+			xlnx,all-inputs = <0x0>;
+			xlnx,all-inputs-2 = <0x0>;
+			xlnx,all-outputs = <0x1>;
+			xlnx,all-outputs-2 = <0x0>;
+			xlnx,dout-default = <0x0>;
+			xlnx,dout-default-2 = <0x0>;
+			xlnx,gpio-width = <0x8>;
+			xlnx,gpio2-width = <0x20>;
+			xlnx,interrupt-present = <0x0>;
+			xlnx,is-dual = <0x0>;
+			xlnx,tri-default = <0xffffffff>;
+			xlnx,tri-default-2 = <0xffffffff>;
+		};
+
+		flash@60000000 {
+			bank-width = <0x2>;
+			compatible = "cfi-flash";
+			reg = <0x60000000 0x8000000>;
+			xlnx,axi-clk-period-ps = <0x1388>;
+			xlnx,include-datawidth-matching-0 = <0x1>;
+			xlnx,include-datawidth-matching-1 = <0x1>;
+			xlnx,include-datawidth-matching-2 = <0x1>;
+			xlnx,include-datawidth-matching-3 = <0x1>;
+			xlnx,include-negedge-ioregs = <0x0>;
+			xlnx,lflash-period-ps = <0x1388>;
+			xlnx,linear-flash-sync-burst = <0x0>;
+			xlnx,max-mem-width = <0x10>;
+			xlnx,mem-a-lsb = <0x0>;
+			xlnx,mem-a-msb = <0x1f>;
+			xlnx,mem0-type = <0x2>;
+			xlnx,mem0-width = <0x10>;
+			xlnx,mem1-type = <0x0>;
+			xlnx,mem1-width = <0x10>;
+			xlnx,mem2-type = <0x0>;
+			xlnx,mem2-width = <0x10>;
+			xlnx,mem3-type = <0x0>;
+			xlnx,mem3-width = <0x10>;
+			xlnx,num-banks-mem = <0x1>;
+			xlnx,page-size = <0x10>;
+			xlnx,parity-type-mem-0 = <0x0>;
+			xlnx,parity-type-mem-1 = <0x0>;
+			xlnx,parity-type-mem-2 = <0x0>;
+			xlnx,parity-type-mem-3 = <0x0>;
+			xlnx,port-diff = <0x0>;
+			xlnx,s-axi-en-reg = <0x0>;
+			xlnx,s-axi-mem-addr-width = <0x20>;
+			xlnx,s-axi-mem-data-width = <0x20>;
+			xlnx,s-axi-mem-id-width = <0x1>;
+			xlnx,s-axi-reg-addr-width = <0x5>;
+			xlnx,s-axi-reg-data-width = <0x20>;
+			xlnx,synch-pipedelay-0 = <0x1>;
+			xlnx,synch-pipedelay-1 = <0x1>;
+			xlnx,synch-pipedelay-2 = <0x1>;
+			xlnx,synch-pipedelay-3 = <0x1>;
+			xlnx,tavdv-ps-mem-0 = <0x1fbd0>;
+			xlnx,tavdv-ps-mem-1 = <0x3a98>;
+			xlnx,tavdv-ps-mem-2 = <0x3a98>;
+			xlnx,tavdv-ps-mem-3 = <0x3a98>;
+			xlnx,tcedv-ps-mem-0 = <0x1fbd0>;
+			xlnx,tcedv-ps-mem-1 = <0x3a98>;
+			xlnx,tcedv-ps-mem-2 = <0x3a98>;
+			xlnx,tcedv-ps-mem-3 = <0x3a98>;
+			xlnx,thzce-ps-mem-0 = <0x88b8>;
+			xlnx,thzce-ps-mem-1 = <0x1b58>;
+			xlnx,thzce-ps-mem-2 = <0x1b58>;
+			xlnx,thzce-ps-mem-3 = <0x1b58>;
+			xlnx,thzoe-ps-mem-0 = <0x1b58>;
+			xlnx,thzoe-ps-mem-1 = <0x1b58>;
+			xlnx,thzoe-ps-mem-2 = <0x1b58>;
+			xlnx,thzoe-ps-mem-3 = <0x1b58>;
+			xlnx,tlzwe-ps-mem-0 = <0xc350>;
+			xlnx,tlzwe-ps-mem-1 = <0x0>;
+			xlnx,tlzwe-ps-mem-2 = <0x0>;
+			xlnx,tlzwe-ps-mem-3 = <0x0>;
+			xlnx,tpacc-ps-flash-0 = <0x61a8>;
+			xlnx,tpacc-ps-flash-1 = <0x61a8>;
+			xlnx,tpacc-ps-flash-2 = <0x61a8>;
+			xlnx,tpacc-ps-flash-3 = <0x61a8>;
+			xlnx,twc-ps-mem-0 = <0x11170>;
+			xlnx,twc-ps-mem-1 = <0x3a98>;
+			xlnx,twc-ps-mem-2 = <0x3a98>;
+			xlnx,twc-ps-mem-3 = <0x3a98>;
+			xlnx,twp-ps-mem-0 = <0x13880>;
+			xlnx,twp-ps-mem-1 = <0x2ee0>;
+			xlnx,twp-ps-mem-2 = <0x2ee0>;
+			xlnx,twp-ps-mem-3 = <0x2ee0>;
+			xlnx,twph-ps-mem-0 = <0x13880>;
+			xlnx,twph-ps-mem-1 = <0x2ee0>;
+			xlnx,twph-ps-mem-2 = <0x2ee0>;
+			xlnx,twph-ps-mem-3 = <0x2ee0>;
+			xlnx,use-startup = <0x0>;
+			xlnx,use-startup-int = <0x0>;
+			xlnx,wr-rec-time-mem-0 = <0x186a0>;
+			xlnx,wr-rec-time-mem-1 = <0x6978>;
+			xlnx,wr-rec-time-mem-2 = <0x6978>;
+			xlnx,wr-rec-time-mem-3 = <0x6978>;
+			#address-cells = <0x1>;
+			#size-cells = <0x1>;
+
+			partition@0x00000000 {
+				label = "fpga";
+				reg = <0x0 0xb00000>;
+			};
+
+			partition@0x00b00000 {
+				label = "boot";
+				reg = <0xb00000 0x80000>;
+			};
+
+			partition@0x00b80000 {
+				label = "bootenv";
+				reg = <0xb80000 0x20000>;
+			};
+
+			partition@0x00ba0000 {
+				label = "kernel";
+				reg = <0xba0000 0xc00000>;
+			};
+
+			partition@0x017a0000 {
+				label = "spare";
+				reg = <0x17a0000 0x0>;
+			};
+		};
+
+		interrupt-controller@41200000 {
+			#interrupt-cells = <0x2>;
+			compatible = "xlnx,xps-intc-1.00.a";
+			interrupt-controller;
+			reg = <0x41200000 0x10000>;
+			xlnx,kind-of-intr = <0x0>;
+			xlnx,num-intr-inputs = <0x6>;
+			linux,phandle = <0x4>;
+			phandle = <0x4>;
+		};
+
+		gpio@40040000 {
+			#gpio-cells = <0x2>;
+			clock-frequency = <0xbebc200>;
+			clock-names = "s_axi_aclk";
+			clocks = <0x8>;
+			compatible = "xlnx,xps-gpio-1.00.a";
+			gpio-controller;
+			reg = <0x40040000 0x10000>;
+			xlnx,all-inputs = <0x1>;
+			xlnx,all-inputs-2 = <0x0>;
+			xlnx,all-outputs = <0x0>;
+			xlnx,all-outputs-2 = <0x0>;
+			xlnx,dout-default = <0x0>;
+			xlnx,dout-default-2 = <0x0>;
+			xlnx,gpio-width = <0x5>;
+			xlnx,gpio2-width = <0x20>;
+			xlnx,interrupt-present = <0x0>;
+			xlnx,is-dual = <0x0>;
+			xlnx,tri-default = <0xffffffff>;
+			xlnx,tri-default-2 = <0xffffffff>;
+		};
+
+		gpio@40000000 {
+			#gpio-cells = <0x2>;
+			clock-frequency = <0xbebc200>;
+			clock-names = "s_axi_aclk";
+			clocks = <0x8>;
+			compatible = "xlnx,xps-gpio-1.00.a";
+			gpio-controller;
+			reg = <0x40000000 0x10000>;
+			xlnx,all-inputs = <0x0>;
+			xlnx,all-inputs-2 = <0x0>;
+			xlnx,all-outputs = <0x1>;
+			xlnx,all-outputs-2 = <0x0>;
+			xlnx,dout-default = <0x0>;
+			xlnx,dout-default-2 = <0x0>;
+			xlnx,gpio-width = <0x1>;
+			xlnx,gpio2-width = <0x20>;
+			xlnx,interrupt-present = <0x0>;
+			xlnx,is-dual = <0x0>;
+			xlnx,tri-default = <0xffffffff>;
+			xlnx,tri-default-2 = <0xffffffff>;
+			linux,phandle = <0x1>;
+			phandle = <0x1>;
+		};
+
+		serial@44a00000 {
+			clock-frequency = <0xbebc200>;
+			clocks = <0x8>;
+			compatible = "xlnx,xps-uart16550-2.00.a", "ns16550a";
+			current-speed = <0x1c200>;
+			device_type = "serial";
+			interrupt-names = "ip2intc_irpt";
+			interrupt-parent = <0x4>;
+			interrupts = <0x0 0x2>;
+			port-number = <0x0>;
+			reg = <0x44a00000 0x10000>;
+			reg-offset = <0x1000>;
+			reg-shift = <0x2>;
+			xlnx,external-xin-clk-hz = <0x17d7840>;
+			xlnx,external-xin-clk-hz-d = <0x19>;
+			xlnx,has-external-rclk = <0x0>;
+			xlnx,has-external-xin = <0x0>;
+			xlnx,is-a-16550 = <0x1>;
+			xlnx,s-axi-aclk-freq-hz-d = "200.0";
+			xlnx,use-modem-ports = <0x1>;
+			xlnx,use-user-ports = <0x1>;
+		};
+	};
+
 	chosen {
-	} ;
-} ;
+		bootargs = "console=ttyS0,115200 earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		ethernet0 = "/amba_pl/ethernet@40c00000";
+		i2c0 = "/amba_pl/i2c@40800000";
+		serial0 = "/amba_pl/serial@44a00000";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
diff --git a/board/xilinx/microblaze-generic/config.mk b/board/xilinx/microblaze-generic/config.mk
index a953977..cb75fde 100644
--- a/board/xilinx/microblaze-generic/config.mk
+++ b/board/xilinx/microblaze-generic/config.mk
@@ -1,18 +1,10 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2007 - 2016 Michal Simek
-#
-# Michal SIMEK <monstr@monstr.eu>
-
-CPU_VER := $(shell echo $(CONFIG_XILINX_MICROBLAZE0_HW_VER))
-
-# USE_HW_MUL can be 0, 1, or 2, defining a hierarchy of HW Mul support.
-CPUFLAGS-$(subst 1,,$(CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL)) += -mxl-multiply-high
-CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL) += -mno-xl-soft-mul
-CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_DIV) += -mno-xl-soft-div
-CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_BARREL) += -mxl-barrel-shift
-CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR) += -mxl-pattern-compare
-
-CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER))
-
-PLATFORM_CPPFLAGS += $(CPUFLAGS-1) $(CPUFLAGS-2)
+TEXT_BASE = 0x80400000
+CONFIG_SYS_TEXT_BASE = 0x80400000
+
+PLATFORM_CPPFLAGS += -mxl-barrel-shift
+PLATFORM_CPPFLAGS += -mno-xl-soft-div
+PLATFORM_CPPFLAGS += -mxl-pattern-compare
+PLATFORM_CPPFLAGS += -mxl-multiply-high
+PLATFORM_CPPFLAGS += -mno-xl-soft-mul
+PLATFORM_CPPFLAGS += -mcpu=v11.0
+PLATFORM_CPPFLAGS += -fgnu89-inline
diff --git a/configs/microblaze-generic_defconfig b/configs/microblaze-generic_defconfig
index 02e62e2..8d64be4 100644
--- a/configs/microblaze-generic_defconfig
+++ b/configs/microblaze-generic_defconfig
@@ -1,73 +1,58 @@
 CONFIG_MICROBLAZE=y
-CONFIG_SYS_TEXT_BASE=0x29000000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL=y
 CONFIG_TARGET_MICROBLAZE_GENERIC=y
 CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
 CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
 CONFIG_XILINX_MICROBLAZE0_USE_DIV=1
 CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1
-CONFIG_NR_DRAM_BANKS=1
+CONFIG_SYS_TEXT_BASE=0x80400000
+CONFIG_DEFAULT_DEVICE_TREE="microblaze-generic"
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
-CONFIG_BOOTDELAY=-1
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="root=romfs"
+CONFIG_BOOTDELAY=4
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_DISPLAY_BOARDINFO=y
-CONFIG_SPL_BOARD_INIT=y
-CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_NOR_SUPPORT=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SYS_OS_BASE=0x2c060000
 CONFIG_HUSH_PARSER=y
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_SYS_PROMPT="U-Boot-mONStR> "
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_SPL=y
+CONFIG_SYS_PROMPT="U-Boot> "
 CONFIG_CMD_ASKENV=y
-CONFIG_CMD_GPIO=y
 CONFIG_CMD_SAVES=y
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_SYS_ENET=y
+CONFIG_NET=y
+CONFIG_NETDEVICES=y
+CONFIG_CMD_NET=y
 CONFIG_CMD_DHCP=y
-CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_NFS=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_JFFS2=y
-CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_EMBED=y
-CONFIG_DEFAULT_DEVICE_TREE="microblaze-generic"
-CONFIG_NETCONSOLE=y
-CONFIG_SPL_DM=y
+CONFIG_DM_ETH=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_GENERIC_BOARD=y
+CONFIG_XILINX_AXIEMAC=y
+CONFIG_SYS_NS16550=y
+CONFIG_CMD_FLASH=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_CMD_IMLS=y
+CONFIG_CMD_GPIO=y
 CONFIG_DM_GPIO=y
 CONFIG_XILINX_GPIO=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_MTD_DEVICE=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
+CONFIG_CMD_TFTPPUT=y
+CONFIG_NETCONSOLE=y
+CONFIG_XILINX_FSL_LINKS=0
+CONFIG_PHY_GIGE=y
+CONFIG_ENV_IS_IN_FLASH=y
 CONFIG_PHY_MICREL=y
 CONFIG_PHY_MICREL_KSZ90X1=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_DM_ETH=y
-CONFIG_XILINX_AXIEMAC=y
-CONFIG_XILINX_EMACLITE=y
-CONFIG_SYS_NS16550=y
-CONFIG_XILINX_UARTLITE=y
-CONFIG_SYSRESET_GPIO=y
-CONFIG_SYSRESET_MICROBLAZE=y
-CONFIG_WDT=y
-CONFIG_XILINX_TB_WATCHDOG=y
+CONFIG_SPL_DM_SERIAL=y
+CONFIG_SPL_OF_LIBFDT=y
+CONFIG_PHY_XILINX=y
+# CONFIG_SPL is not set
+# CONFIG_CMD_EEPROM is not set
+# CONFIG_BOOTARGS is not set
+# CONFIG_USE_BOOTARGS is not set
diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
index ba0952c..fd1da2b 100644
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
@@ -1,205 +1,173 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2007-2010 Michal Simek
- *
- * Michal SIMEK <monstr@monstr.eu>
- */
-
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include "../board/xilinx/microblaze-generic/xparameters.h"
-
-/* MicroBlaze CPU */
-#define	MICROBLAZE_V5		1
-
-/* linear and spi flash memory */
-#ifdef XILINX_FLASH_START
-#define	FLASH
-#undef	SPIFLASH
-#undef	RAMENV	/* hold environment in flash */
-#else
-#undef	FLASH
-#undef	SPIFLASH
-#define	RAMENV	/* hold environment in RAM */
-#endif
+#define CONFIG_SYS_BAUDRATE_TABLE  { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 }
+
+/* processor - microblaze_0 */
+#define XILINX_USE_MSR_INSTR	1
+#define XILINX_USE_ICACHE	1
+#define XILINX_USE_DCACHE	1
+#define XILINX_DCACHE_BYTE_SIZE	16384
+#define XILINX_PVR	2
+#define MICROBLAZE_V5
+#define CONFIG_CMD_IRQ
+#define CONFIG_DCACHE
+#define CONFIG_ICACHE
+
+/* main_memory - ddr3_sdram */
+
+
+/* uart - rs232_uart */
+#define CONFIG_SYS_NS16550_COM1	((XILINX_UART16550_BASEADDR & ~0xF) + 0x1000)
+#define CONFIG_SYS_NS16550_REG_SIZE	-4
+#define CONSOLE_ARG	"console=console=ttyS0,115200\0"
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_CONS_INDEX	1
+#define ESERIAL0	"eserial0=setenv stdout eserial0;setenv stdin eserial0\0"
+#define SERIAL_MULTI  "serial=setenv stdout serial;setenv stdin serial\0"
+#define CONFIG_SYS_NS16550_CLK	200000000
+#define CONFIG_BAUDRATE	115200
+
+/* ethernet - axi_ethernet */
+#define CONFIG_PHY_XILINX
+#define CONFIG_MII
+#define CONFIG_PHY_MARVELL
+#define CONFIG_PHY_NATSEMI
+#define CONFIG_NET_MULTI
+#define CONFIG_PHY_REALTEK
+#define CONFIG_NETCONSOLE	1
+#define CONFIG_SERVERIP	172.25.229.115
+#define CONFIG_IPADDR
+
+/* nor_flash - linear_flash */
+#define CONFIG_SYS_FLASH_BASE	0x60000000
+#define CONFIG_FLASH_END	0x68000000
+#define CONFIG_SYS_MAX_FLASH_SECT	2048
+#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+
+/* timer - axi_timer_0 */
+
+/* intc - microblaze_0_axi_intc */
+
+/* FPGA */
+
+/* Memory testing handling */
+#define CONFIG_SYS_MEMTEST_START	0x80000000
+#define CONFIG_SYS_MEMTEST_END	(0x80000000 + 0x1000)
+#define CONFIG_SYS_LOAD_ADDR	0x80000000 /* default load address */
+
+/* global pointer options */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(0x40000000 - GENERATED_GBL_DATA_SIZE)
+
+/* Size of malloc() pool */
+#define SIZE	0x100000
+#define CONFIG_SYS_MALLOC_LEN	SIZE
+#define CONFIG_SYS_MONITOR_LEN	SIZE
+#define CONFIG_SYS_MONITOR_BASE	(0x80000000 + CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_MONITOR_LEN - GENERATED_BD_INFO_SIZE)
+#define CONFIG_SYS_MALLOC_BASE	(CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
+
+/* stack */
+#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_TEXT_BASE - CONFIG_SYS_MALLOC_F_LEN)
+
+/* No of_control support yet*/
+
+/* BOOTP options */
+#define CONFIG_BOOTP_SERVERIP
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_MAY_FAIL
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_PXE
 
-/* uart */
-/* The following table includes the supported baudrates */
-# define CONFIG_SYS_BAUDRATE_TABLE \
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
-
-/* setting reset address */
-/*#define	CONFIG_SYS_RESET_ADDRESS	CONFIG_SYS_TEXT_BASE*/
-
-#define CONFIG_SYS_MALLOC_LEN	0xC0000
-
-/* Stack location before relocation */
-#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_TEXT_BASE - \
-					 CONFIG_SYS_MALLOC_F_LEN)
-
-/*
- * CFI flash memory layout - Example
- * CONFIG_SYS_FLASH_BASE = 0x2200_0000;
- * CONFIG_SYS_FLASH_SIZE = 0x0080_0000;	  8MB
- *
- * SECT_SIZE = 0x20000;			128kB is one sector
- * CONFIG_ENV_SIZE = SECT_SIZE;		128kB environment store
- *
- * 0x2200_0000	CONFIG_SYS_FLASH_BASE
- *					FREE		256kB
- * 0x2204_0000	CONFIG_ENV_ADDR
- *					ENV_AREA	128kB
- * 0x2206_0000
- *					FREE
- * 0x2280_0000	CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE
- *
- */
-
-#ifdef FLASH
-# define CONFIG_SYS_FLASH_BASE		XILINX_FLASH_START
-# define CONFIG_SYS_FLASH_SIZE		XILINX_FLASH_SIZE
-/* ?empty sector */
-# define CONFIG_SYS_FLASH_EMPTY_INFO	1
-/* max number of memory banks */
-# define CONFIG_SYS_MAX_FLASH_BANKS	1
-/* max number of sectors on one chip */
-# define CONFIG_SYS_MAX_FLASH_SECT	512
-/* hardware flash protection */
-/* use buffered writes (20x faster) */
-# ifdef	RAMENV
-#  define CONFIG_ENV_SIZE	0x1000
-#  define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
-
-# else	/* FLASH && !RAMENV */
-/* 128K(one sector) for env */
-#  define CONFIG_ENV_SECT_SIZE	0x20000
-#  define CONFIG_ENV_ADDR \
-			(CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE))
-#  define CONFIG_ENV_SIZE	0x20000
-# endif /* FLASH && !RAMBOOT */
-#else /* !FLASH */
-
-#ifdef SPIFLASH
-# define CONFIG_SF_DEFAULT_MODE		SPI_MODE_3
-# define CONFIG_SF_DEFAULT_SPEED	XILINX_SPI_FLASH_MAX_FREQ
-# define CONFIG_SF_DEFAULT_CS		XILINX_SPI_FLASH_CS
-
-# ifdef	RAMENV
-#  define CONFIG_ENV_SIZE	0x1000
-#  define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
-
-# else	/* SPIFLASH && !RAMENV */
-#  define CONFIG_ENV_SPI_MODE		SPI_MODE_3
-#  define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
-#  define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
-/* 128K(two sectors) for env */
-#  define CONFIG_ENV_SECT_SIZE	0x10000
-#  define CONFIG_ENV_SIZE	(2 * CONFIG_ENV_SECT_SIZE)
-/* Warning: adjust the offset in respect of other flash content and size */
-#  define CONFIG_ENV_OFFSET	(128 * CONFIG_ENV_SECT_SIZE) /* at 8MB */
-# endif /* SPIFLASH && !RAMBOOT */
-#else /* !SPIFLASH */
-
-/* ENV in RAM */
-# define CONFIG_ENV_SIZE	0x1000
-# define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
-#endif /* !SPIFLASH */
-#endif /* !FLASH */
-
-#if defined(XILINX_USE_ICACHE)
-# define CONFIG_ICACHE
-#else
-# undef CONFIG_ICACHE
-#endif
+/*Command line configuration.*/
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_AUTO_COMPLETE
 
-#if defined(XILINX_USE_DCACHE)
-# define CONFIG_DCACHE
-#else
-# undef CONFIG_DCACHE
-#endif
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_CBSIZE	2048/* Console I/O Buffer Size      */
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 
-#ifndef XILINX_DCACHE_BYTE_SIZE
-#define XILINX_DCACHE_BYTE_SIZE	32768
-#endif
 
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
+/* Use the HUSH parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 
-#if defined(CONFIG_MTD_PARTITIONS)
-/* MTD partitions */
+#define CONFIG_ENV_VARS_UBOOT_CONFIG
+#define CONFIG_ENV_OVERWRITE	/* Allow to overwrite the u-boot environment variables */
 
-/* default mtd partition table */
-#endif
+#define CONFIG_LMB
 
-/* size of console buffer */
-#define	CONFIG_SYS_CBSIZE	512
-/* max number of command args */
-#define	CONFIG_SYS_MAXARGS	15
-/* default load address */
-#define	CONFIG_SYS_LOAD_ADDR	0
+/* FDT support */
+#define CONFIG_DISPLAY_BOARDINFO_LATE
 
-#define	CONFIG_HOSTNAME		"microblaze-generic"
-#define	CONFIG_BOOTCOMMAND	"base 0;tftp 11000000 image.img;bootm"
 
 /* architecture dependent code */
-#define	CONFIG_SYS_USR_EXCEP	/* user exception */
-
-#define	CONFIG_PREBOOT	"echo U-BOOT for ${hostname};setenv preboot;echo"
-
-#ifndef CONFIG_EXTRA_ENV_SETTINGS
-#define	CONFIG_EXTRA_ENV_SETTINGS	"unlock=yes\0" \
-					"nor0=flash-0\0"\
-					"mtdparts=mtdparts=flash-0:"\
-					"256k(u-boot),256k(env),3m(kernel),"\
-					"1m(romfs),1m(cramfs),-(jffs2)\0"\
-					"nc=setenv stdout nc;"\
-					"setenv stdin nc\0" \
-					"serial=setenv stdout serial;"\
-					"setenv stdin serial\0"
-#endif
-
-/* Enable flat device tree support */
-#define CONFIG_LMB		1
+#define CONFIG_SYS_USR_EXCEP    /* user exception */
+#define CONFIG_SYS_HZ   1000
+
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_MAXARGS     32      /* max number of command args */
+#define CONFIG_SYS_LONGHELP
+/* Initial memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ 0x8000000
+
+/* Environment settings*/
+#define CONFIG_ENV_ADDR	0x60b80000
+#define CONFIG_ENV_SIZE	0x20000
+#define CONFIG_ENV_SECT_SIZE	0x20000
+/* PREBOOT */
+#define CONFIG_PREBOOT	"echo U-BOOT for ${hostname};setenv preboot; echo; dhcp"
+
+/* Extra U-Boot Env settings */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	SERIAL_MULTI \ 
+	CONSOLE_ARG \ 
+	ESERIAL0 \ 
+	"nc=setenv stdout nc;setenv stdin nc;\0" \ 
+	"ethaddr=00:0a:35:00:22:01\0" \
+	"autoload=no\0" \ 
+	"sdbootdev=0\0" \ 
+	"clobstart=0x81000000\0" \ 
+	"netstart=0x81000000\0" \ 
+	"dtbnetstart=0x82800000\0" \ 
+	"loadaddr=0x81000000\0" \ 
+	"bootsize=0x80000\0" \ 
+	"bootstart=0x60b00000\0" \ 
+	"boot_img=u-boot-s.bin\0" \ 
+	"load_boot=tftpboot ${clobstart} ${boot_img}\0" \ 
+	"update_boot=setenv img boot; setenv psize ${bootsize}; setenv installcmd \"install_boot\"; run load_boot test_img; setenv img; setenv psize; setenv installcmd\0" \ 
+	"install_boot=protect off ${bootstart} +${bootsize} && erase ${bootstart} +${bootsize} && "  "cp.b ${clobstart} ${bootstart} ${filesize}\0" \ 
+	"bootenvsize=0x20000\0" \ 
+	"bootenvstart=0x60b80000\0" \ 
+	"eraseenv=protect off ${bootenvstart} +${bootenvsize} && erase ${bootenvstart} +${bootenvsize}\0" \ 
+	"kernelsize=0xc00000\0" \ 
+	"kernelstart=0x60ba0000\0" \ 
+	"kernel_img=image.ub\0" \ 
+	"load_kernel=tftpboot ${clobstart} ${kernel_img}\0" \ 
+	"update_kernel=setenv img kernel; setenv psize ${kernelsize}; setenv installcmd \"install_kernel\"; run load_kernel test_crc; setenv img; setenv psize; setenv installcmd\0" \ 
+	"install_kernel=protect off ${kernelstart} +${kernelsize} && erase ${kernelstart} +${kernelsize} && "  "cp.b ${clobstart} ${kernelstart} ${filesize}\0" \ 
+	"cp_kernel2ram=cp.b ${kernelstart} ${netstart} ${kernelsize}\0" \ 
+	"fpgasize=0xb00000\0" \ 
+	"fpgastart=0x60000000\0" \ 
+	"fpga_img=system.bit.bin\0" \ 
+	"load_fpga=tftpboot ${clobstart} ${fpga_img}\0" \ 
+	"update_fpga=setenv img fpga; setenv psize ${fpgasize}; setenv installcmd \"install_fpga\"; run load_fpga test_img; setenv img; setenv psize; setenv installcmd\0" \ 
+	"install_fpga=protect off ${fpgastart} +${fpgasize} && erase ${fpgastart} +${fpgasize} && "  "cp.b ${clobstart} ${fpgastart} ${filesize}\0" \ 
+	"fault=echo ${img} image size is greater than allocated place - partition ${img} is NOT UPDATED\0" \ 
+	"test_crc=if imi ${clobstart}; then run test_img; else echo ${img} Bad CRC - ${img} is NOT UPDATED; fi\0" \ 
+	"test_img=setenv var \"if test ${filesize} -gt ${psize}\\; then run fault\\; else run ${installcmd}\\; fi\"; run var; setenv var\0" \ 
+	"netboot=tftpboot ${netstart} ${kernel_img} && bootm\0" \ 
+	"default_bootcmd=run cp_kernel2ram && bootm ${netstart}\0" \ 
+""
+/* BOOTCOMMAND */
+#define CONFIG_BOOTCOMMAND	"run default_bootcmd"
 
-#if defined(CONFIG_XILINX_AXIEMAC)
-# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	1
 #endif
-
-/* SPL part */
-
-#ifdef CONFIG_SYS_FLASH_BASE
-# define CONFIG_SYS_UBOOT_BASE		CONFIG_SYS_FLASH_BASE
-#endif
-
-/* for booting directly linux */
-
-#define CONFIG_SYS_FDT_BASE		(CONFIG_SYS_FLASH_BASE + \
-					 0x40000)
-#define CONFIG_SYS_FDT_SIZE		(16 << 10)
-#define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_TEXT_BASE + \
-					 0x1000000)
-
-/* SP location before relocation, must use scratch RAM */
-/* BRAM start */
-#define CONFIG_SYS_INIT_RAM_ADDR	0x0
-/* BRAM size - will be generated */
-#define CONFIG_SYS_INIT_RAM_SIZE	0x100000
-
-# define CONFIG_SPL_STACK_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
-					 CONFIG_SYS_INIT_RAM_SIZE - \
-					 CONFIG_SYS_MALLOC_F_LEN)
-
-/* Just for sure that there is a space for stack */
-#define CONFIG_SPL_STACK_SIZE		0x100
-
-#define CONFIG_SYS_UBOOT_START		CONFIG_SYS_TEXT_BASE
-
-#define CONFIG_SPL_MAX_FOOTPRINT	(CONFIG_SYS_INIT_RAM_SIZE - \
-					 CONFIG_SYS_INIT_RAM_ADDR - \
-					 CONFIG_SYS_MALLOC_F_LEN - \
-					 CONFIG_SPL_STACK_SIZE)
-
-#endif	/* __CONFIG_H */
-- 
2.7.5