dm-verity and Yocto/OE
----------------------
The dm-verity feature provides a level of data integrity and resistance to
data tampering.  It does this by creating a hash for each data block of
the underlying device as the base of a hash tree.  There are many
documents out there to further explain the implementaion, such as the
in-kernel one itself:

https://docs.kernel.org/admin-guide/device-mapper/verity.html

The goal of this document is not to reproduce that content, but instead to
capture the Yocto/OE specifics of the dm-verity infrastructure used here.

Ideally this should enable a person to build and deploy an image on one of
the supported reference platforms, and then further adapt to their own
platform and specific storage requirements.

Basic Settings
--------------
Largely everything is driven off of a dm-verity image class; a typical
block of non MACHINE specific settings are shown below:

INITRAMFS_IMAGE = "dm-verity-image-initramfs"
DM_VERITY_IMAGE = "core-image-minimal"
DM_VERITY_IMAGE_TYPE = "ext4"
IMAGE_CLASSES += "dm-verity-img"
INITRAMFS_IMAGE_BUNDLE = "1"

Kernel Configuration
--------------------
Kernel configuration for dm-verity happens automatically via IMAGE_CLASSES
which will source features/device-mapper/dm-verity.scc when dm-verity-img
is used. [See commit d9feafe991c]

Supported Platforms
-------------------
In theory, you can use dm-verity anywhere - there is nothing arch/BSP
specific in the core kernel support.  However, at the BSP level, one
eventually has to decide what device(s) are to be hashed, and where the
hash tables are stored.

To that end, the BSP storage specifics live in meta-security/wic dir and
represent the current set of example configurations that have been tested
and submitted at some point.

Getting Started
---------------
This document assumes you are starting from the basic auto-created
conf/local.conf and conf/bblayers.conf from the oe-init-build-env

Firstly, you need the meta-security layer to conf/bblayers.conf along with
the dependencies it has -- see the top level meta-security README for that.

Next, assuming you'll be using dm-verity for validation of your rootfs,
you'll need to enable read-only rootfs support in your local.conf with:

EXTRA_IMAGE_FEATURES = "read-only-rootfs"

For more details, see the associated documentation:

https://docs.yoctoproject.org/dev/dev-manual/read-only-rootfs.html

Also add the basic block of dm-verity settings shown above, and select
your MACHINE from one of the supported platforms.

If there is a dm-verity-<MACHINE>.txt file for your BSP, check that for
any additional platform specific recommended settings, such as the
WKS_FILES which can specify board specific storage layout discussed below.

Then you should be able to do a "bitbake core-image-minimal" just like any
other normal build.  What you will notice, is the content in
tmp/deploy/images/<MACHINE>/ now have suffixes like "rootfs.ext4.verity"

While you can manually work with these images just like any other build,
this is where the BSP specific recipes in meta-security/wic can simplify
things and remove a bunch of manual steps that might be error prone.

Consider for example, the beaglebone black WIC file, which contains:

part /boot --source bootimg-partition --ondisk mmcblk0 --fstype=vfat
--label boot --active --align 4 --fixed-size 32 --sourceparams="loader=u-boot" --use-uuid
part / --source rawcopy --ondisk mmcblk0 --sourceparams="file=${IMGDEPLOYDIR}/${DM_VERITY_IMAGE}-${MACHINE}.${DM_VERITY_IMAGE_TYPE}.verity"
bootloader --append="console=ttyS0,115200"

As can be seen, it maps out the partitions, including the bootloader, and
saves doing a whole bunch of manual partitioning and dd steps.

This file is copied into tmp/deploy/images/<MACHINE>/ with bitbake
variables expanded with their corresponding values for wic to make use of.

Continuing with the beaglebone example, we'll see output similar to:

             ----------------------
$ wic create -e core-image-minimal beaglebone-yocto-verity

[...]

INFO: Creating image(s)...

INFO: The new image(s) can be found here:
  ./beaglebone-yocto-verity.wks-202303070223-mmcblk0.direct

The following build artifacts were used to create the image(s):
  BOOTIMG_DIR:       /home/paul/poky/build-bbb-verity/tmp/work/beaglebone_yocto-poky-linux-gnueabi/core-image-minimal/1.0-r0/recipe-sysroot/usr/share
  KERNEL_DIR:        /home/paul/poky/build-bbb-verity/tmp/deploy/images/beaglebone-yocto
  NATIVE_SYSROOT:    /home/paul/poky/build-bbb-verity/tmp/work/cortexa8hf-neon-poky-linux-gnueabi/wic-tools/1.0-r0/recipe-sysroot-native

INFO: The image(s) were created using OE kickstart file:
  /home/paul/poky/meta-security/wic/beaglebone-yocto-verity.wks.in
             ----------------------

The "direct" image contains the partition table, bootloader, and dm-verity
enabled ext4 image all in one -- ready to write to a raw device, such as a
u-SD card in the case of the beaglebone.