diff --git a/meta-arm/meta-arm-bsp/recipes-bsp/uefi/files/edk2-platforms/0003-Platform-ARM-N1Sdp-Modify-the-IRQ-ID-of-Debug-UART-a.patch b/meta-arm/meta-arm-bsp/recipes-bsp/uefi/files/edk2-platforms/0003-Platform-ARM-N1Sdp-Modify-the-IRQ-ID-of-Debug-UART-a.patch
new file mode 100644
index 0000000..f0de02e
--- /dev/null
+++ b/meta-arm/meta-arm-bsp/recipes-bsp/uefi/files/edk2-platforms/0003-Platform-ARM-N1Sdp-Modify-the-IRQ-ID-of-Debug-UART-a.patch
@@ -0,0 +1,67 @@
+From adc66d99663f71ec97313c40b0d00a908f292c30 Mon Sep 17 00:00:00 2001
+From: Himanshu Sharma <Himanshu.Sharma@arm.com>
+Date: Mon, 30 May 2022 10:53:30 +0000
+Subject: [PATCH 3/3] Platform/ARM/N1Sdp: Modify the IRQ ID of Debug UART and
+ routing it to IOFPGA UART1
+
+In DBG2 table, IRQ ID was set as 0 for the UART. This overwrote the
+IPI0 trigger method to "level", which prevented SGI0 to be enabled
+again after a CPU offline/online cycle.
+
+This patch fixes the above issue by assigning a reserved IRQ ID
+for the Debug UART, other than 0 and also routing it to use IOFPGA
+UART1 by unsharing it from currently using serial terminal.
+
+Upstream-Status: Pending
+Signed-off-by: Adam Johnston <adam.johnston@arm.com>
+Signed-off-by: Xueliang Zhong <xueliang.zhong@arm.com>
+Signed-off-by: Himanshu Sharma <Himanshu.Sharma@arm.com>
+Change-Id: I6640c3c8f77afd233304ce9cb06dcf80a8659c16
+
+---
+ .../ConfigurationManagerDxe/ConfigurationManager.c        | 2 +-
+ Platform/ARM/N1Sdp/N1SdpPlatform.dsc                      | 8 ++++----
+ 2 files changed, 5 insertions(+), 5 deletions(-)
+
+diff --git a/Platform/ARM/N1Sdp/ConfigurationManager/ConfigurationManagerDxe/ConfigurationManager.c b/Platform/ARM/N1Sdp/ConfigurationManager/ConfigurationManagerDxe/ConfigurationManager.c
+index 36b5fc9e..e8873200 100644
+--- a/Platform/ARM/N1Sdp/ConfigurationManager/ConfigurationManagerDxe/ConfigurationManager.c
++++ b/Platform/ARM/N1Sdp/ConfigurationManager/ConfigurationManagerDxe/ConfigurationManager.c
+@@ -320,7 +320,7 @@ EDKII_PLATFORM_REPOSITORY_INFO N1sdpRepositoryInfo = {
+   // Debug Serial Port
+   {
+     FixedPcdGet64 (PcdSerialDbgRegisterBase),               // BaseAddress
+-    0,                                                      // Interrupt -unused
++    250,                                                    // Interrupt (reserved)
+     FixedPcdGet64 (PcdSerialDbgUartBaudRate),               // BaudRate
+     FixedPcdGet32 (PcdSerialDbgUartClkInHz),                // Clock
+     EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_ARM_PL011_UART        // Port subtype
+diff --git a/Platform/ARM/N1Sdp/N1SdpPlatform.dsc b/Platform/ARM/N1Sdp/N1SdpPlatform.dsc
+index 865dd04d..878c8f2f 100644
+--- a/Platform/ARM/N1Sdp/N1SdpPlatform.dsc
++++ b/Platform/ARM/N1Sdp/N1SdpPlatform.dsc
+@@ -4,7 +4,7 @@
+ # This provides platform specific component descriptions and libraries that
+ # conform to EFI/Framework standards.
+ #
+-# Copyright (c) 2018 - 2021, ARM Limited. All rights reserved.<BR>
++# Copyright (c) 2018 - 2022, ARM Limited. All rights reserved.<BR>
+ #
+ # SPDX-License-Identifier: BSD-2-Clause-Patent
+ #
+@@ -136,9 +136,9 @@
+   gArmPlatformTokenSpaceGuid.PL011UartInterrupt|95
+ 
+   # PL011 Serial Debug UART (DBG2)
+-  gArmPlatformTokenSpaceGuid.PcdSerialDbgRegisterBase|gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase
+-  gArmPlatformTokenSpaceGuid.PcdSerialDbgUartBaudRate|gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate
+-  gArmPlatformTokenSpaceGuid.PcdSerialDbgUartClkInHz|50000000
++  gArmPlatformTokenSpaceGuid.PcdSerialDbgRegisterBase|0x1C0A0000
++  gArmPlatformTokenSpaceGuid.PcdSerialDbgUartBaudRate|115200
++  gArmPlatformTokenSpaceGuid.PcdSerialDbgUartClkInHz|24000000
+ 
+   # SBSA Watchdog
+   gArmTokenSpaceGuid.PcdGenericWatchdogEl2IntrNum|93
+-- 
+2.37.2
+