From a09ed2542f4d991fef61bd51f87d373f44ad1ff3 Mon Sep 17 00:00:00 2001
From: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Date: Mon, 6 Jun 2022 12:46:38 +0100
Subject: [PATCH 10/26] arm_ffa: introduce armffa command

Provide armffa command showcasing the use of the FF-A driver

The armffa command allows to query secure partitions data from
the secure world and exchanging messages with the partitions.

Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Upstream-Status: Submitted [cover letter: https://lore.kernel.org/all/20220926101723.9965-1-abdellatif.elkhlifi@arm.com/]
---

Changelog:
===============

v4:

* remove pattern data in do_ffa_msg_send_direct_req

v3:

* use the new driver interfaces (partition_info_get, sync_send_receive)
  in armffa command

v2:

* replace use of ffa_helper_init_device function by
 ffa_helper_bus_discover

v1:

* introduce armffa command

 MAINTAINERS                      |   1 +
 cmd/Kconfig                      |  10 ++
 cmd/Makefile                     |   2 +
 cmd/armffa.c                     | 242 +++++++++++++++++++++++++++++++
 drivers/firmware/arm-ffa/Kconfig |   1 +
 5 files changed, 256 insertions(+)
 create mode 100644 cmd/armffa.c

diff --git a/MAINTAINERS b/MAINTAINERS
index e760b4ca3a..9f0a1b7387 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -247,6 +247,7 @@ F:	include/configs/turris_*.h
 ARM FF-A
 M:	Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
 S:	Maintained
+F:	cmd/armffa.c
 F:	doc/README.ffa.drv
 F:	drivers/firmware/arm-ffa/
 F:	include/arm_ffa.h
diff --git a/cmd/Kconfig b/cmd/Kconfig
index ba2f321ae9..090e668125 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -873,6 +873,16 @@ endmenu
 
 menu "Device access commands"
 
+config CMD_ARMFFA
+	bool "Arm FF-A test command"
+	depends on ARM_FFA_TRANSPORT
+	help
+	  Provides a test command for the Arm FF-A driver
+	  supported options:
+		- Listing the partition(s) info
+		- Sending a data pattern to the specified partition
+		- Displaying the arm_ffa device info
+
 config CMD_ARMFLASH
 	#depends on FLASH_CFI_DRIVER
 	bool "armflash"
diff --git a/cmd/Makefile b/cmd/Makefile
index 5e43a1e022..e40f52f1e4 100644
--- a/cmd/Makefile
+++ b/cmd/Makefile
@@ -12,6 +12,8 @@ obj-y += panic.o
 obj-y += version.o
 
 # command
+
+obj-$(CONFIG_CMD_ARMFFA) += armffa.o
 obj-$(CONFIG_CMD_ACPI) += acpi.o
 obj-$(CONFIG_CMD_ADDRMAP) += addrmap.o
 obj-$(CONFIG_CMD_AES) += aes.o
diff --git a/cmd/armffa.c b/cmd/armffa.c
new file mode 100644
index 0000000000..9b56e8a830
--- /dev/null
+++ b/cmd/armffa.c
@@ -0,0 +1,242 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2022 ARM Limited
+ * Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
+ */
+
+#include <arm_ffa.h>
+#include <asm/io.h>
+#include <common.h>
+#include <command.h>
+#include <dm.h>
+#include <mapmem.h>
+#include <stdlib.h>
+
+/**
+ * do_ffa_get_singular_partition_info - implementation of the getpart subcommand
+ * @cmdtp:		Command Table
+ * @flag:		flags
+ * @argc:		number of arguments
+ * @argv:		arguments
+ *
+ * This function queries the secure partition information which the UUID is provided
+ * as an argument. The function uses the arm_ffa driver partition_info_get operation
+ * to retrieve the data.
+ * The input UUID string is expected to be in big endian format.
+ *
+ * Return:
+ *
+ * CMD_RET_SUCCESS: on success, otherwise failure
+ */
+static int do_ffa_get_singular_partition_info(struct cmd_tbl *cmdtp, int flag, int argc,
+					      char *const argv[])
+{
+	u32 count = 0, size = 0;
+	int ret;
+	struct ffa_partition_info *parts_info;
+	u32 info_idx;
+
+	if (argc != 1)
+		return -EINVAL;
+
+	/* Mode 1: getting the number of secure partitions */
+	ret = ffa_bus_ops_get()->partition_info_get(argv[0], &count, NULL);
+	if (ret != 0) {
+		ffa_err("Failure in querying partitions count (error code: %d)", ret);
+		return ret;
+	}
+
+	if (!count) {
+		ffa_info("No secure partition found");
+		return ret;
+	}
+
+	/*
+	 * pre-allocate a buffer to be filled by the driver
+	 * with ffa_partition_info structs
+	 */
+
+	ffa_info("Pre-allocating %d partition(s) info structures", count);
+
+	parts_info = calloc(count, sizeof(struct ffa_partition_info));
+	if (!parts_info)
+		return -EINVAL;
+
+	size = count * sizeof(struct ffa_partition_info);
+
+	/*
+	 * ask the driver to fill the buffer with the SPs info
+	 */
+
+	ret = ffa_bus_ops_get()->partition_info_get(argv[0], &size, parts_info);
+	if (ret != 0) {
+		ffa_err("Failure in querying partition(s) info (error code: %d)", ret);
+		free(parts_info);
+		return ret;
+	}
+
+	/*
+	 * SPs found , show the partition information
+	 */
+	for (info_idx = 0; info_idx < count ; info_idx++) {
+		ffa_info("Partition: id = 0x%x , exec_ctxt 0x%x , properties 0x%x",
+			 parts_info[info_idx].id,
+			 parts_info[info_idx].exec_ctxt,
+			 parts_info[info_idx].properties);
+	}
+
+	free(parts_info);
+
+	return 0;
+}
+
+/**
+ * do_ffa_msg_send_direct_req - implementation of the ping subcommand
+ * @cmdtp:		Command Table
+ * @flag:		flags
+ * @argc:		number of arguments
+ * @argv:		arguments
+ *
+ * This function sends data to the secure partition which the ID is provided
+ * as an argument. The function uses the arm_ffa driver sync_send_receive operation
+ * to send data.
+ *
+ * Return:
+ *
+ * CMD_RET_SUCCESS: on success, otherwise failure
+ */
+int  do_ffa_msg_send_direct_req(struct cmd_tbl *cmdtp, int flag, int argc,
+				char *const argv[])
+{
+	struct ffa_send_direct_data msg = {
+			.data0 = 0xaaaaaaaa,
+			.data1 = 0xbbbbbbbb,
+			.data2 = 0xcccccccc,
+			.data3 = 0xdddddddd,
+			.data4 = 0xeeeeeeee,
+	};
+	u16 part_id;
+	int ret;
+
+	if (argc != 1)
+		return -EINVAL;
+
+	errno = 0;
+	part_id = strtoul(argv[0], NULL, 16);
+
+	if (errno) {
+		ffa_err("Invalid partition ID");
+		return -EINVAL;
+	}
+
+	ret = ffa_bus_ops_get()->sync_send_receive(part_id, &msg);
+	if (ret == 0) {
+		u8 cnt;
+
+		ffa_info("SP response:\n[LSB]");
+		for (cnt = 0;
+		     cnt < sizeof(struct ffa_send_direct_data) / sizeof(u64);
+		     cnt++)
+			ffa_info("0x%llx", ((u64 *)&msg)[cnt]);
+	} else {
+		ffa_err("Sending direct request error (%d)", ret);
+	}
+
+	return ret;
+}
+
+/**
+ *do_ffa_dev_list - implementation of the devlist subcommand
+ * @cmdtp: [in]		Command Table
+ * @flag:		flags
+ * @argc:		number of arguments
+ * @argv:		arguments
+ *
+ * This function queries the devices belonging to the UCLASS_FFA
+ * class. Currently, one device is expected to show up: the arm_ffa device
+ *
+ * Return:
+ *
+ * CMD_RET_SUCCESS: on success, otherwise failure
+ */
+int do_ffa_dev_list(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
+{
+	struct udevice *dev = NULL;
+	int i, ret;
+
+	ffa_info("arm_ffa uclass entries:");
+
+	for (i = 0, ret = uclass_first_device(UCLASS_FFA, &dev);
+	     dev;
+	     ret = uclass_next_device(&dev), i++) {
+		if (ret)
+			break;
+
+		ffa_info("entry %d - instance %08x, ops %08x, plat %08x",
+			 i,
+			 (u32)map_to_sysmem(dev),
+			 (u32)map_to_sysmem(dev->driver->ops),
+			 (u32)map_to_sysmem(dev_get_plat(dev)));
+	}
+
+	return cmd_process_error(cmdtp, ret);
+}
+
+static struct cmd_tbl armffa_commands[] = {
+	U_BOOT_CMD_MKENT(getpart, 1, 1, do_ffa_get_singular_partition_info, "", ""),
+	U_BOOT_CMD_MKENT(ping, 1, 1, do_ffa_msg_send_direct_req, "", ""),
+	U_BOOT_CMD_MKENT(devlist, 0, 1, do_ffa_dev_list, "", ""),
+};
+
+/**
+ * do_armffa - the armffa command main function
+ * @cmdtp:	Command Table
+ * @flag:		flags
+ * @argc:		number of arguments
+ * @argv:		arguments
+ *
+ * This function identifies which armffa subcommand to run.
+ * Then, it makes sure the arm_ffa device is probed and
+ * ready for use.
+ * Then, it runs the subcommand.
+ *
+ * Return:
+ *
+ * CMD_RET_SUCCESS: on success, otherwise failure
+ */
+static int do_armffa(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
+{
+	struct cmd_tbl *armffa_cmd;
+	int ret;
+
+	if (argc < 2)
+		return CMD_RET_USAGE;
+
+	armffa_cmd = find_cmd_tbl(argv[1], armffa_commands, ARRAY_SIZE(armffa_commands));
+
+	argc -= 2;
+	argv += 2;
+
+	if (!armffa_cmd || argc > armffa_cmd->maxargs)
+		return CMD_RET_USAGE;
+
+	ret = ffa_bus_discover();
+	if (ret != 0)
+		return cmd_process_error(cmdtp, ret);
+
+	if (!ffa_bus_ops_get())
+		return -EINVAL;
+
+	ret = armffa_cmd->cmd(armffa_cmd, flag, argc, argv);
+
+	return cmd_process_error(armffa_cmd, ret);
+}
+
+U_BOOT_CMD(armffa, 4, 1, do_armffa,
+	   "Arm FF-A operations test command",
+	   "getpart <partition UUID>\n"
+	   "	 - lists the partition(s) info\n"
+	   "ping <partition ID>\n"
+	   "	 - sends a data pattern to the specified partition\n"
+	   "devlist\n"
+	   "	 - displays the arm_ffa device info\n");
diff --git a/drivers/firmware/arm-ffa/Kconfig b/drivers/firmware/arm-ffa/Kconfig
index aceb61cf49..40b467b0a5 100644
--- a/drivers/firmware/arm-ffa/Kconfig
+++ b/drivers/firmware/arm-ffa/Kconfig
@@ -4,6 +4,7 @@ config ARM_FFA_TRANSPORT
 	bool "Enable Arm Firmware Framework for Armv8-A driver"
 	depends on DM && ARM64
 	select ARM_SMCCC
+	select CMD_ARMFFA
 	select LIB_UUID
 	select DEVRES
 	help
-- 
2.17.1