From 2de11bf9de6d0471772c100c72712d2a09c7cefc Mon Sep 17 00:00:00 2001
From: Mohamed Omar Asaker <mohamed.omarasaker@arm.com>
Date: Wed, 21 Dec 2022 14:44:31 +0000
Subject: [PATCH 3/10] Platform: corstone1000: Add soft crc32 calculation

crc32 is required by different components.
for example: during bl1 provisioning crc32 calculation is required

Signed-off-by: Mohamed Omar Asaker <mohamed.omarasaker@arm.com>
Upstream-Status: Pending [Not submitted to upstream yet]
---
 .../arm/corstone1000/soft_crc/soft_crc.c      | 121 ++++++++++++++++++
 .../arm/corstone1000/soft_crc/soft_crc.h      |  18 +++
 2 files changed, 139 insertions(+)
 create mode 100644 platform/ext/target/arm/corstone1000/soft_crc/soft_crc.c
 create mode 100644 platform/ext/target/arm/corstone1000/soft_crc/soft_crc.h

diff --git a/platform/ext/target/arm/corstone1000/soft_crc/soft_crc.c b/platform/ext/target/arm/corstone1000/soft_crc/soft_crc.c
new file mode 100644
index 0000000000..85f1e30d9f
--- /dev/null
+++ b/platform/ext/target/arm/corstone1000/soft_crc/soft_crc.c
@@ -0,0 +1,121 @@
+/* Copyright (C) 1986 Gary S. Brown.  You may use this program, or
+   code or tables extracted from it, as desired without restriction.*/
+
+/* First, the polynomial itself and its table of feedback terms.  The  */
+/* polynomial is                                                       */
+/* X^32+X^26+X^23+X^22+X^16+X^12+X^11+X^10+X^8+X^7+X^5+X^4+X^2+X^1+X^0 */
+/* Note that we take it "backwards" and put the highest-order term in  */
+/* the lowest-order bit.  The X^32 term is "implied"; the LSB is the   */
+/* X^31 term, etc.  The X^0 term (usually shown as "+1") results in    */
+/* the MSB being 1.                                                    */
+
+/* Note that the usual hardware shift register implementation, which   */
+/* is what we're using (we're merely optimizing it by doing eight-bit  */
+/* chunks at a time) shifts bits into the lowest-order term.  In our   */
+/* implementation, that means shifting towards the right.  Why do we   */
+/* do it this way?  Because the calculated CRC must be transmitted in  */
+/* order from highest-order term to lowest-order term.  UARTs transmit */
+/* characters in order from LSB to MSB.  By storing the CRC this way,  */
+/* we hand it to the UART in the order low-byte to high-byte; the UART */
+/* sends each low-bit to hight-bit; and the result is transmission bit */
+/* by bit from highest- to lowest-order term without requiring any bit */
+/* shuffling on our part.  Reception works similarly.                  */
+
+/* The feedback terms table consists of 256, 32-bit entries.  Notes:   */
+/*                                                                     */
+/*  1. The table can be generated at runtime if desired; code to do so */
+/*     is shown later.  It might not be obvious, but the feedback      */
+/*     terms simply represent the results of eight shift/xor opera-    */
+/*     tions for all combinations of data and CRC register values.     */
+/*                                                                     */
+/*  2. The CRC accumulation logic is the same for all CRC polynomials, */
+/*     be they sixteen or thirty-two bits wide.  You simply choose the */
+/*     appropriate table.  Alternatively, because the table can be     */
+/*     generated at runtime, you can start by generating the table for */
+/*     the polynomial in question and use exactly the same "updcrc",   */
+/*     if your application needn't simultaneously handle two CRC       */
+/*     polynomials.  (Note, however, that XMODEM is strange.)          */
+/*                                                                     */
+/*  3. For 16-bit CRCs, the table entries need be only 16 bits wide;   */
+/*     of course, 32-bit entries work OK if the high 16 bits are zero. */
+/*                                                                     */
+/*  4. The values must be right-shifted by eight bits by the "updcrc"  */
+/*     logic; the shift must be unsigned (bring in zeroes).  On some   */
+/*     hardware you could probably optimize the shift in assembler by  */
+/*     using byte-swap instructions.                                   */
+
+/**
+ * The code derived from work by Gary S. Brown.
+*/
+
+#include "soft_crc.h"
+
+
+const static uint32_t crc_32_tab[] = { /* CRC polynomial 0xedb88320 */
+0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, 0x076dc419, 0x706af48f,
+0xe963a535, 0x9e6495a3, 0x0edb8832, 0x79dcb8a4, 0xe0d5e91e, 0x97d2d988,
+0x09b64c2b, 0x7eb17cbd, 0xe7b82d07, 0x90bf1d91, 0x1db71064, 0x6ab020f2,
+0xf3b97148, 0x84be41de, 0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7,
+0x136c9856, 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec, 0x14015c4f, 0x63066cd9,
+0xfa0f3d63, 0x8d080df5, 0x3b6e20c8, 0x4c69105e, 0xd56041e4, 0xa2677172,
+0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b, 0x35b5a8fa, 0x42b2986c,
+0xdbbbc9d6, 0xacbcf940, 0x32d86ce3, 0x45df5c75, 0xdcd60dcf, 0xabd13d59,
+0x26d930ac, 0x51de003a, 0xc8d75180, 0xbfd06116, 0x21b4f4b5, 0x56b3c423,
+0xcfba9599, 0xb8bda50f, 0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924,
+0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d, 0x76dc4190, 0x01db7106,
+0x98d220bc, 0xefd5102a, 0x71b18589, 0x06b6b51f, 0x9fbfe4a5, 0xe8b8d433,
+0x7807c9a2, 0x0f00f934, 0x9609a88e, 0xe10e9818, 0x7f6a0dbb, 0x086d3d2d,
+0x91646c97, 0xe6635c01, 0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e,
+0x6c0695ed, 0x1b01a57b, 0x8208f4c1, 0xf50fc457, 0x65b0d9c6, 0x12b7e950,
+0x8bbeb8ea, 0xfcb9887c, 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3, 0xfbd44c65,
+0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2, 0x4adfa541, 0x3dd895d7,
+0xa4d1c46d, 0xd3d6f4fb, 0x4369e96a, 0x346ed9fc, 0xad678846, 0xda60b8d0,
+0x44042d73, 0x33031de5, 0xaa0a4c5f, 0xdd0d7cc9, 0x5005713c, 0x270241aa,
+0xbe0b1010, 0xc90c2086, 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f,
+0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4, 0x59b33d17, 0x2eb40d81,
+0xb7bd5c3b, 0xc0ba6cad, 0xedb88320, 0x9abfb3b6, 0x03b6e20c, 0x74b1d29a,
+0xead54739, 0x9dd277af, 0x04db2615, 0x73dc1683, 0xe3630b12, 0x94643b84,
+0x0d6d6a3e, 0x7a6a5aa8, 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1,
+0xf00f9344, 0x8708a3d2, 0x1e01f268, 0x6906c2fe, 0xf762575d, 0x806567cb,
+0x196c3671, 0x6e6b06e7, 0xfed41b76, 0x89d32be0, 0x10da7a5a, 0x67dd4acc,
+0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5, 0xd6d6a3e8, 0xa1d1937e,
+0x38d8c2c4, 0x4fdff252, 0xd1bb67f1, 0xa6bc5767, 0x3fb506dd, 0x48b2364b,
+0xd80d2bda, 0xaf0a1b4c, 0x36034af6, 0x41047a60, 0xdf60efc3, 0xa867df55,
+0x316e8eef, 0x4669be79, 0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236,
+0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f, 0xc5ba3bbe, 0xb2bd0b28,
+0x2bb45a92, 0x5cb36a04, 0xc2d7ffa7, 0xb5d0cf31, 0x2cd99e8b, 0x5bdeae1d,
+0x9b64c2b0, 0xec63f226, 0x756aa39c, 0x026d930a, 0x9c0906a9, 0xeb0e363f,
+0x72076785, 0x05005713, 0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38,
+0x92d28e9b, 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21, 0x86d3d2d4, 0xf1d4e242,
+0x68ddb3f8, 0x1fda836e, 0x81be16cd, 0xf6b9265b, 0x6fb077e1, 0x18b74777,
+0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c, 0x8f659eff, 0xf862ae69,
+0x616bffd3, 0x166ccf45, 0xa00ae278, 0xd70dd2ee, 0x4e048354, 0x3903b3c2,
+0xa7672661, 0xd06016f7, 0x4969474d, 0x3e6e77db, 0xaed16a4a, 0xd9d65adc,
+0x40df0b66, 0x37d83bf0, 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9,
+0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6, 0xbad03605, 0xcdd70693,
+0x54de5729, 0x23d967bf, 0xb3667a2e, 0xc4614ab8, 0x5d681b02, 0x2a6f2b94,
+0xb40bbe37, 0xc30c8ea1, 0x5a05df1b, 0x2d02ef8d
+};
+
+#define UPDC32(octet,crc) (crc_32_tab[((crc)\
+     ^ ((uint8_t)octet)) & 0xff] ^ ((crc) >> 8))
+
+static inline uint32_t crc32buf(char *buf, size_t len)
+{
+      register uint32_t oldcrc32;
+
+      oldcrc32 = 0xFFFFFFFF;
+
+      for ( ; len; --len, ++buf)
+      {
+            oldcrc32 = UPDC32(*buf, oldcrc32);
+      }
+
+      return ~oldcrc32;
+}
+
+/* Calculate crc32 */
+uint32_t crc32(const void *buf, size_t len) {
+    return crc32buf(buf, len);
+}
+
diff --git a/platform/ext/target/arm/corstone1000/soft_crc/soft_crc.h b/platform/ext/target/arm/corstone1000/soft_crc/soft_crc.h
new file mode 100644
index 0000000000..e5b06075c9
--- /dev/null
+++ b/platform/ext/target/arm/corstone1000/soft_crc/soft_crc.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (c) 2023, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef __SOFT_CRC_H__
+#define __SOFT_CRC_H__
+
+#include <stddef.h>
+#include <stdint.h>
+
+/* Calculate crc32 */
+uint32_t crc32(const void *buf, size_t len);
+
+#endif /* __SOFT_CRC_H__ */
+
-- 
2.25.1