tree 246cc0fe02343a6cc5acfccc582d5e5474792b8f
parent a687b62fe433263d5138cb9e9a41467762e141a7
author Joel Stanley <joel@jms.id.au> 1529123994 +0930
committer Brad Bishop <bradleyb@fuzziesquirrel.com> 1529461233 +0000

kernel: Move to 4.17

This brings the dev-4.13 development cycle to a close. By the end of the
cycle the 4.13 tree contained 236 patches.

This moves all of the 4.13 based functionality on top of a 4.17 base. We
currently have 97 patches in the tree. The reduction of 139 is mostly
due to code landing in Linus' tree, with a handful of fixes being merged
into the base patch.

The configuration is updated with newly landed drivers. In addition new
upstream security features are enabled, and legacy ATAG DTB support and
/dev/mem are removed.

Amithash Prasad (1):
      ARM: dts: aspeed: Add Portwell Neptune machine

Andrew Jeffery (11):
      ARM: dts: aspeed: witherspoon: Update max31785 node
      dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation
      pmbus (max31785): Add support for devicetree configuration
      pmbus (core): One-shot retries for failure to set page
      pmbus (core): Use driver callbacks in pmbus_get_fan_rate()
      pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers
      soc: aspeed: Miscellaneous control interfaces
      dts: aspeed-g5: Expose VGA scratch registers
      dts: aspeed-g5: Expose SuperIO scratch registers
      fsi: gpio: Trace busy count
      fsi: gpio: Remove unused 'id' variable

Avi Fishman (1):
      ipmi: NPCM7xx KCS BMC: enable interrupt to the host

Benjamin Herrenschmidt (15):
      gpio/aspeed: Set output latch before changing direction
      gpio/aspeed: Use a cache of output data registers
      fsi/fsi-master-gpio: Sample input data on different clock phase
      fsi/fsi-master-gpio: Add "no-gpio-delays" option
      fsi/fsi-master-gpio: Reduce turnaround clocks
      fsi/fsi-master-gpio: Reduce dpoll clocks
      fsi/fsi-master-gpio: Delay sampling of FSI data input
      fsi/fsi-master-gpio: Implement CRC error recovery
      fsi/fsi-master-gpio: More error handling cleanup
      fsi/sbefifo: Add driver for the SBE FIFO
      fsi/scom: Add mutex around FSI2PIB accesses
      fsi/scom: Whitespace fixes
      fsi/scom: Fixup endian annotations
      fsi/scom: Add register definitions
      fsi/scom: Major overhaul

Brad Bishop (1):
      ARM: dts: witherspoon: Enable checkstop and cooling gpio keys

Brian Yang (1):
      ARM: dts: aspeed: Add Inventec Lanyang BMC

Christopher Bostic (3):
      ARM: dts: witherspoon: Add gpio keys for power supply presence
      ARM: dts: fsi: Add optional master property no-scan-on-init
      iio: dps310: Temperature measurement errata

Cyril Bur (1):
      misc: Add ASPEED mbox driver

Cédric Le Goater (4):
      mtd: spi-nor: aspeed: use command mode for reads
      mtd: spi-nor: aspeed: add support for SPI dual IO read mode
      mtd: spi-nor: aspeed: link controller with the ahb clock
      mtd: spi-nor: aspeed: optimize read mode

Dan Carpenter (2):
      net/ncsi: prevent a couple array underflows
      serial/aspeed-vuart: fix a couple mod_timer() calls

Eddie James (9):
      ARM: dts: aspeed: witherspoon: set alternate boot
      fsi: scom: Remove PIB reset during probe
      dt-bindings: i2c: Add FSI-attached I2C master dt binding documentation
      i2c: Add FSI-attached I2C master algorithm
      i2c: fsi: Add port structures
      i2c: fsi: Add abort and hardware reset procedures
      i2c: fsi: Add transfer implementation
      i2c: fsi: Add I2C master locking
      i2c: fsi: Add bus recovery

Edward A. James (3):
      ARM: dts: fsi: Add I2C master and ports to FSI CFAMs
      drivers/fsi: Add On-Chip Controller (OCC) driver
      hwmon: Add On-Chip Controller (OCC) hwmon driver

Haiyue Wang (1):
      ipmi: add an NPCM7xx KCS BMC driver

Jae Hyun Yoo (1):
      clk: aspeed: Fix reset bits for PCI/VGA and PECI

James Feist (1):
      ARM: dts: Add S2600WF BMC Machine

Jeremy Kerr (8):
      serial: Introduce UPSTAT_SYNC_FIFO for synchronised FIFOs
      serial/8250: export serial8250_read_char
      serial/aspeed-vuart: Implement rx throttling
      serial/aspeed-vuart: Implement quick throttle mechanism
      fsi: gpio: Use a mutex to protect transfers
      fsi/gpio: Include command build in locked section
      fsi/gpio: Use relative-addressing commands
      fsi/master-gpio: Replace bit_bit lock with IRQ disable/enable

Joel Stanley (22):
      clk: aspeed: Support second reset register
      clk: aspeed: Mark bclk (PCIe) and dclk (VGA) as critical
      ARM: dts: aspeed-romulus: Enable VUART
      ARM: dts: aspeed-ast2500: Update flash layout
      ARM: dts: aspeed: Add LPC mailbox node
      ARM: dts: aspeed: Enable mbox
      ARM: dts: aspeed: Add devices under FSI CFAM
      ARM: dts: palmetto: Enable mbox and occ-hwmon nodes
      iio: Add driver for Infineon DPS310
      ARM: dts: aspeed-g5: Add DAC MUX userspace control
      ARM: dts: aspeed-g5: Clean up sio registers
      ARM: dts: aspeed: Describe random number device
      ARM: dts: aspeed: Fix hwrng register address
      fsi: master-hub: Fix sparse warnings
      fsi: core: Fix sparse warnings
      drm: Add ASPEED GFX driver
      drm: aspeed: Debugfs interface for GFX registers
      ARM: dts: aspeed-g5: Add resets and clocks to GFX node
      ARM: dts: ast2500-evb: Enable the GFX IP
      ARM: dts: witherspoon: Enable the GFX IP
      ARM: dts: romulus: Enable the GFX IP
      ARM: config: aspeed: Update defconfig

Lei YU (5):
      clk: aspeed: Add 24MHz fixed clock
      ARM: dts: aspeed: romulus: Add w83773g temp sensor
      ARM: dts: aspeed: zaius: Add pcie-e2b-present gpio key
      ARM: dts: aspeed: romulus: Add id-button gpio key
      ARM: dts: aspeed: Use 24MHz fixed clock for pwm

Samuel Mendoza-Jonas (2):
      net/ncsi: Refactor MAC, VLAN filters
      net/ncsi: Avoid GFP_KERNEL in response handler

Tali Perry (2):
      dt-binding: clk: npcm750: add binding
      clk: npcm7xx: add clock controller

Tomer Maimon (2):
      dt-binding: pinctrl: document NPCM7xx pin controller DT bindings
      pinctrl: npcm: add NPCM7xx pin control driver

Wei Yongjun (1):
      clk: npcm7xx: fix return value check in npcm7xx_clk_init()

YueHaibing (1):
      net: remove unnecessary genlmsg_cancel() calls

Tested: Booted Romulus, Palmetto hosts. Booted ASPEED platforms in QEMU
Change-Id: Ib6f7e68267cd66e98c0ace1132fd2d664a0fc623
Signed-off-by: Joel Stanley <joel@jms.id.au>