meta-ampere: Add Mt.Jade machine
Add initial Mt.Jade platform support with minimal configuration so that
the code can be compiled and booted on the Mt.Jade platform system.
Tested:
1. Compile OpenBMC image for Mt.Jade successfully and can boot on
Mt.Jade.
2. Login to console and WebUI successfully.
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: Ib4c2c30be7fc0a13cc66f7eb1c8b9604e9a5292f
diff --git a/meta-ampere/meta-jade/conf/bblayers.conf.sample b/meta-ampere/meta-jade/conf/bblayers.conf.sample
new file mode 100644
index 0000000..f4d7fc3
--- /dev/null
+++ b/meta-ampere/meta-jade/conf/bblayers.conf.sample
@@ -0,0 +1,29 @@
+# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+LCONF_VERSION = "8"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+ ##OEROOT##/meta \
+ ##OEROOT##/meta-openembedded/meta-oe \
+ ##OEROOT##/meta-openembedded/meta-networking \
+ ##OEROOT##/meta-openembedded/meta-perl \
+ ##OEROOT##/meta-openembedded/meta-python \
+ ##OEROOT##/meta-phosphor \
+ ##OEROOT##/meta-aspeed \
+ ##OEROOT##/meta-ampere \
+ ##OEROOT##/meta-ampere/meta-jade \
+ "
+BBLAYERS_NON_REMOVABLE ?= " \
+ ##OEROOT##/meta \
+ ##OEROOT##/meta-openembedded/meta-oe \
+ ##OEROOT##/meta-openembedded/meta-networking \
+ ##OEROOT##/meta-openembedded/meta-perl \
+ ##OEROOT##/meta-openembedded/meta-python \
+ ##OEROOT##/meta-phosphor \
+ ##OEROOT##/meta-aspeed \
+ ##OEROOT##/meta-ampere \
+ ##OEROOT##/meta-ampere/meta-jade \
+ "
diff --git a/meta-ampere/meta-jade/conf/conf-notes.txt b/meta-ampere/meta-jade/conf/conf-notes.txt
new file mode 100644
index 0000000..9b3c01a
--- /dev/null
+++ b/meta-ampere/meta-jade/conf/conf-notes.txt
@@ -0,0 +1,2 @@
+Common targets are:
+ obmc-phosphor-image
diff --git a/meta-ampere/meta-jade/conf/layer.conf b/meta-ampere/meta-jade/conf/layer.conf
new file mode 100644
index 0000000..2cf1805
--- /dev/null
+++ b/meta-ampere/meta-jade/conf/layer.conf
@@ -0,0 +1,10 @@
+# We have a conf and classes directory, add to BBPATH
+BBPATH .= ":${LAYERDIR}"
+
+# We have recipes-* directories, add to BBFILES
+BBFILES += "${LAYERDIR}/recipes-*/*/*.bb \
+ ${LAYERDIR}/recipes-*/*/*.bbappend"
+
+BBFILE_COLLECTIONS += "jade-layer"
+BBFILE_PATTERN_jade-layer := "^${LAYERDIR}/"
+LAYERSERIES_COMPAT_jade-layer = "dunfell gatesgarth"
diff --git a/meta-ampere/meta-jade/conf/local.conf.sample b/meta-ampere/meta-jade/conf/local.conf.sample
new file mode 100644
index 0000000..200d897
--- /dev/null
+++ b/meta-ampere/meta-jade/conf/local.conf.sample
@@ -0,0 +1,216 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+MACHINE ??= "mtjade"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing
+# these defaults.
+#
+DISTRO ?= "openbmc-phosphor"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+# - 'package_deb' for debian style deb files
+# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+# - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_rpm"
+
+#
+# SDK/ADT target architecture
+#
+# This variable specifies the architecture to build SDK/ADT items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+SANITY_TESTED_DISTROS_append ?= " *"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+# "dbg-pkgs" - add -dbg packages for all installed packages
+# (adds symbol information for debugging/profiling)
+# "dev-pkgs" - add -dev packages for all installed packages
+# (useful if you want to develop against libs in the image)
+# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
+# (useful if you want to run the package test suites)
+# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.)
+# "tools-debug" - add debugging tools (gdb, strace)
+# "eclipse-debug" - add Eclipse remote debugging support
+# "tools-profile" - add profiling tools (oprofile, exmap, lttng, valgrind)
+# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+# "debug-tweaks" - make an image suitable for development
+# e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES = "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+# - 'buildstats' collect build statistics
+# - 'image-mklibs' to reduce shared library files size for an image
+# - 'image-prelink' in order to prelink the filesystem image
+# - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necessary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS = "\
+ STOPTASKS,${TMPDIR},1G,100K \
+ STOPTASKS,${DL_DIR},1G,100K \
+ STOPTASKS,${SSTATE_DIR},1G,100K \
+ STOPTASKS,/tmp,100M,100K \
+ ABORT,${TMPDIR},100M,1K \
+ ABORT,${DL_DIR},100M,1K \
+ ABORT,${SSTATE_DIR},100M,1K \
+ ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. This assumes there is a
+# libsdl library available on your build system.
+#PACKAGECONFIG_append_pn-qemu-native = " sdl"
+#PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
diff --git a/meta-ampere/meta-jade/conf/machine/mtjade.conf b/meta-ampere/meta-jade/conf/machine/mtjade.conf
new file mode 100644
index 0000000..c7bf92b
--- /dev/null
+++ b/meta-ampere/meta-jade/conf/machine/mtjade.conf
@@ -0,0 +1,9 @@
+KMACHINE = "aspeed"
+KERNEL_DEVICETREE = "${KMACHINE}-bmc-ampere-${MACHINE}.dtb"
+UBOOT_MACHINE = "ast_g5_phy_config"
+
+require conf/machine/include/ast2500.inc
+require conf/machine/include/obmc-bsp-common.inc
+require conf/distro/include/phosphor-isolation.inc
+
+VOLATILE_LOG_DIR = "no"
diff --git a/meta-ampere/meta-jade/recipes-kernel/linux/linux-aspeed/0001-ARM-dts-aspeed-Add-device-tree-for-Ampere-s-Mt.-Jade.patch b/meta-ampere/meta-jade/recipes-kernel/linux/linux-aspeed/0001-ARM-dts-aspeed-Add-device-tree-for-Ampere-s-Mt.-Jade.patch
new file mode 100644
index 0000000..b517fd1
--- /dev/null
+++ b/meta-ampere/meta-jade/recipes-kernel/linux/linux-aspeed/0001-ARM-dts-aspeed-Add-device-tree-for-Ampere-s-Mt.-Jade.patch
@@ -0,0 +1,599 @@
+From 5c45537b1d74c22cd95c196bf261b3ee3aa4856f Mon Sep 17 00:00:00 2001
+From: Quan Nguyen <quan@os.amperecomputing.com>
+Date: Thu, 12 Nov 2020 13:42:43 +0700
+Subject: [PATCH 2/2] ARM: dts: aspeed: Add device tree for Ampere's Mt. Jade
+ BMC
+
+The Mt. Jade BMC is an ASPEED AST2500-based BMC for the Mt. Jade
+hardware reference platform with Ampere's Altra Processor Family.
+
+Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
+Reviewed-by: Joel Stanley <joel@jms.id.au>
+Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
+Signed-off-by: Phong Vo <phong@os.amperecomputing.com>
+Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
+---
+ arch/arm/boot/dts/Makefile | 1 +
+ .../arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 558 ++++++++++++++++++
+ 2 files changed, 559 insertions(+)
+ create mode 100644 arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
+
+diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
+index 9f9f3e49132a..5da5e8f93554 100644
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -1398,6 +1398,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
+ aspeed-ast2500-evb.dtb \
+ aspeed-ast2600-evb.dtb \
+ aspeed-bmc-amd-ethanolx.dtb \
++ aspeed-bmc-ampere-mtjade.dtb \
+ aspeed-bmc-arm-centriq2400-rep.dtb \
+ aspeed-bmc-arm-stardragon4800-rep2.dtb \
+ aspeed-bmc-bytedance-g220a.dtb \
+diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
+new file mode 100644
+index 000000000000..8f5ec22e51c2
+--- /dev/null
++++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
+@@ -0,0 +1,558 @@
++// SPDX-License-Identifier: GPL-2.0+
++/dts-v1/;
++#include "aspeed-g5.dtsi"
++#include <dt-bindings/gpio/aspeed-gpio.h>
++
++/ {
++ model = "Ampere Mt. Jade BMC";
++ compatible = "ampere,mtjade-bmc", "aspeed,ast2500";
++
++ chosen {
++ stdout-path = &uart5;
++ bootargs = "console=ttyS4,115200 earlyprintk";
++ };
++
++ memory@80000000 {
++ reg = <0x80000000 0x20000000>;
++ };
++
++ reserved-memory {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges;
++
++ vga_memory: framebuffer@9f000000 {
++ no-map;
++ reg = <0x9f000000 0x01000000>; /* 16M */
++ };
++
++ gfx_memory: framebuffer {
++ size = <0x01000000>;
++ alignment = <0x01000000>;
++ compatible = "shared-dma-pool";
++ reusable;
++ };
++
++ video_engine_memory: jpegbuffer {
++ size = <0x02000000>; /* 32M */
++ alignment = <0x01000000>;
++ compatible = "shared-dma-pool";
++ reusable;
++ };
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ fault {
++ gpios = <&gpio ASPEED_GPIO(B, 6) GPIO_ACTIVE_HIGH>;
++ };
++
++ identify {
++ gpios = <&gpio ASPEED_GPIO(Q, 6) GPIO_ACTIVE_HIGH>;
++ };
++ };
++
++ gpio-keys {
++ compatible = "gpio-keys";
++
++ shutdown_ack {
++ label = "SHUTDOWN_ACK";
++ gpios = <&gpio ASPEED_GPIO(G, 2) GPIO_ACTIVE_LOW>;
++ linux,code = <ASPEED_GPIO(G, 2)>;
++ };
++
++ reboot_ack {
++ label = "REBOOT_ACK";
++ gpios = <&gpio ASPEED_GPIO(J, 3) GPIO_ACTIVE_LOW>;
++ linux,code = <ASPEED_GPIO(J, 3)>;
++ };
++
++ S0_overtemp {
++ label = "S0_OVERTEMP";
++ gpios = <&gpio ASPEED_GPIO(G, 3) GPIO_ACTIVE_LOW>;
++ linux,code = <ASPEED_GPIO(G, 3)>;
++ };
++
++ S0_hightemp {
++ label = "S0_HIGHTEMP";
++ gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>;
++ linux,code = <ASPEED_GPIO(J, 0)>;
++ };
++
++ S0_cpu_fault {
++ label = "S0_CPU_FAULT";
++ gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>;
++ linux,code = <ASPEED_GPIO(J, 1)>;
++ };
++
++ S1_overtemp {
++ label = "S1_OVERTEMP";
++ gpios = <&gpio ASPEED_GPIO(Z, 6) GPIO_ACTIVE_LOW>;
++ linux,code = <ASPEED_GPIO(Z, 6)>;
++ };
++
++ S1_hightemp {
++ label = "S1_HIGHTEMP";
++ gpios = <&gpio ASPEED_GPIO(AB, 0) GPIO_ACTIVE_LOW>;
++ linux,code = <ASPEED_GPIO(AB, 0)>;
++ };
++
++ S1_cpu_fault {
++ label = "S1_CPU_FAULT";
++ gpios = <&gpio ASPEED_GPIO(Z, 1) GPIO_ACTIVE_HIGH>;
++ linux,code = <ASPEED_GPIO(Z, 1)>;
++ };
++
++ id_button {
++ label = "ID_BUTTON";
++ gpios = <&gpio ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
++ linux,code = <ASPEED_GPIO(Q, 5)>;
++ };
++
++ };
++
++ gpioA0mux: mux-controller {
++ compatible = "gpio-mux";
++ #mux-control-cells = <0>;
++ mux-gpios = <&gpio ASPEED_GPIO(A, 0) GPIO_ACTIVE_LOW>;
++ };
++
++ adc0mux: adc0mux {
++ compatible = "io-channel-mux";
++ io-channels = <&adc 0>;
++ #io-channel-cells = <1>;
++ io-channel-names = "parent";
++ mux-controls = <&gpioA0mux>;
++ channels = "s0", "s1";
++ };
++
++ adc1mux: adc1mux {
++ compatible = "io-channel-mux";
++ io-channels = <&adc 1>;
++ #io-channel-cells = <1>;
++ io-channel-names = "parent";
++ mux-controls = <&gpioA0mux>;
++ channels = "s0", "s1";
++ };
++
++ adc2mux: adc2mux {
++ compatible = "io-channel-mux";
++ io-channels = <&adc 2>;
++ #io-channel-cells = <1>;
++ io-channel-names = "parent";
++ mux-controls = <&gpioA0mux>;
++ channels = "s0", "s1";
++ };
++
++ adc3mux: adc3mux {
++ compatible = "io-channel-mux";
++ io-channels = <&adc 3>;
++ #io-channel-cells = <1>;
++ io-channel-names = "parent";
++ mux-controls = <&gpioA0mux>;
++ channels = "s0", "s1";
++ };
++
++ adc4mux: adc4mux {
++ compatible = "io-channel-mux";
++ io-channels = <&adc 4>;
++ #io-channel-cells = <1>;
++ io-channel-names = "parent";
++ mux-controls = <&gpioA0mux>;
++ channels = "s0", "s1";
++ };
++
++ adc5mux: adc5mux {
++ compatible = "io-channel-mux";
++ io-channels = <&adc 5>;
++ #io-channel-cells = <1>;
++ io-channel-names = "parent";
++ mux-controls = <&gpioA0mux>;
++ channels = "s0", "s1";
++ };
++
++ adc6mux: adc6mux {
++ compatible = "io-channel-mux";
++ io-channels = <&adc 6>;
++ #io-channel-cells = <1>;
++ io-channel-names = "parent";
++ mux-controls = <&gpioA0mux>;
++ channels = "s0", "s1";
++ };
++
++ adc7mux: adc7mux {
++ compatible = "io-channel-mux";
++ io-channels = <&adc 7>;
++ #io-channel-cells = <1>;
++ io-channel-names = "parent";
++ mux-controls = <&gpioA0mux>;
++ channels = "s0", "s1";
++ };
++
++ adc8mux: adc8mux {
++ compatible = "io-channel-mux";
++ io-channels = <&adc 8>;
++ #io-channel-cells = <1>;
++ io-channel-names = "parent";
++ mux-controls = <&gpioA0mux>;
++ channels = "s0", "s1";
++ };
++
++ adc9mux: adc9mux {
++ compatible = "io-channel-mux";
++ io-channels = <&adc 9>;
++ #io-channel-cells = <1>;
++ io-channel-names = "parent";
++ mux-controls = <&gpioA0mux>;
++ channels = "s0", "s1";
++ };
++
++ adc10mux: adc10mux {
++ compatible = "io-channel-mux";
++ io-channels = <&adc 10>;
++ #io-channel-cells = <1>;
++ io-channel-names = "parent";
++ mux-controls = <&gpioA0mux>;
++ channels = "s0", "s1";
++ };
++
++ adc11mux: adc11mux {
++ compatible = "io-channel-mux";
++ io-channels = <&adc 11>;
++ #io-channel-cells = <1>;
++ io-channel-names = "parent";
++ mux-controls = <&gpioA0mux>;
++ channels = "s0", "s1";
++ };
++
++ adc12mux: adc12mux {
++ compatible = "io-channel-mux";
++ io-channels = <&adc 12>;
++ #io-channel-cells = <1>;
++ io-channel-names = "parent";
++ mux-controls = <&gpioA0mux>;
++ channels = "s0", "s1";
++ };
++
++ adc13mux: adc13mux {
++ compatible = "io-channel-mux";
++ io-channels = <&adc 13>;
++ #io-channel-cells = <1>;
++ io-channel-names = "parent";
++ mux-controls = <&gpioA0mux>;
++ channels = "s0", "s1";
++ };
++
++ iio-hwmon {
++ compatible = "iio-hwmon";
++ io-channels = <&adc0mux 0>, <&adc0mux 1>,
++ <&adc1mux 0>, <&adc1mux 1>,
++ <&adc2mux 0>, <&adc2mux 1>,
++ <&adc3mux 0>, <&adc3mux 1>,
++ <&adc4mux 0>, <&adc4mux 1>,
++ <&adc5mux 0>, <&adc5mux 1>,
++ <&adc6mux 0>, <&adc6mux 1>,
++ <&adc7mux 0>, <&adc7mux 1>,
++ <&adc8mux 0>, <&adc8mux 1>,
++ <&adc9mux 0>, <&adc9mux 1>,
++ <&adc10mux 0>, <&adc10mux 1>,
++ <&adc11mux 0>, <&adc11mux 1>,
++ <&adc12mux 0>, <&adc12mux 1>,
++ <&adc13mux 0>, <&adc13mux 1>;
++ };
++
++ iio-hwmon-adc14 {
++ compatible = "iio-hwmon";
++ io-channels = <&adc 14>;
++ };
++
++ iio-hwmon-battery {
++ compatible = "iio-hwmon";
++ io-channels = <&adc 15>;
++ };
++};
++
++&fmc {
++ status = "okay";
++ flash@0 {
++ status = "okay";
++ m25p,fast-read;
++ label = "bmc";
++ /* spi-max-frequency = <50000000>; */
++#include "openbmc-flash-layout.dtsi"
++ };
++};
++
++&spi1 {
++ status = "okay";
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_spi1_default>;
++
++ flash@0 {
++ status = "okay";
++ m25p,fast-read;
++ label = "pnor";
++ /* spi-max-frequency = <100000000>; */
++ };
++};
++
++&uart1 {
++ status = "okay";
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_txd1_default
++ &pinctrl_rxd1_default
++ &pinctrl_ncts1_default
++ &pinctrl_nrts1_default>;
++};
++
++&uart2 {
++ status = "okay";
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_txd2_default
++ &pinctrl_rxd2_default>;
++};
++
++&uart3 {
++ status = "okay";
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_txd3_default
++ &pinctrl_rxd3_default>;
++};
++
++&uart4 {
++ status = "okay";
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_txd4_default
++ &pinctrl_rxd4_default>;
++};
++
++/* The BMC's uart */
++&uart5 {
++ status = "okay";
++};
++
++&mac1 {
++ status = "okay";
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
++};
++
++&i2c0 {
++ status = "okay";
++};
++
++&i2c1 {
++ status = "okay";
++};
++
++&i2c2 {
++ status = "okay";
++};
++
++&i2c3 {
++ status = "okay";
++ eeprom@50 {
++ compatible = "microchip,24c64", "atmel,24c64";
++ reg = <0x50>;
++ pagesize = <32>;
++ };
++
++ inlet_mem2: tmp175@28 {
++ compatible = "ti,tmp175";
++ reg = <0x28>;
++ };
++
++ inlet_cpu: tmp175@29 {
++ compatible = "ti,tmp175";
++ reg = <0x29>;
++ };
++
++ inlet_mem1: tmp175@2a {
++ compatible = "ti,tmp175";
++ reg = <0x2a>;
++ };
++
++ outlet_cpu: tmp175@2b {
++ compatible = "ti,tmp175";
++ reg = <0x2b>;
++ };
++
++ outlet1: tmp175@2c {
++ compatible = "ti,tmp175";
++ reg = <0x2c>;
++ };
++
++ outlet2: tmp175@2d {
++ compatible = "ti,tmp175";
++ reg = <0x2d>;
++ };
++};
++
++&i2c4 {
++ status = "okay";
++ rtc@51 {
++ compatible = "nxp,pcf85063a";
++ reg = <0x51>;
++ };
++};
++
++&i2c5 {
++ status = "okay";
++};
++
++&i2c6 {
++ status = "okay";
++ psu@58 {
++ compatible = "pmbus";
++ reg = <0x58>;
++ };
++
++ psu@59 {
++ compatible = "pmbus";
++ reg = <0x59>;
++ };
++};
++
++&i2c7 {
++ status = "okay";
++};
++
++&i2c8 {
++ status = "okay";
++};
++
++&i2c9 {
++ status = "okay";
++};
++
++&gfx {
++ status = "okay";
++ memory-region = <&gfx_memory>;
++};
++
++&pinctrl {
++ aspeed,external-nodes = <&gfx &lhc>;
++};
++
++&pwm_tacho {
++ status = "okay";
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_pwm2_default &pinctrl_pwm3_default
++ &pinctrl_pwm4_default &pinctrl_pwm5_default
++ &pinctrl_pwm6_default &pinctrl_pwm7_default>;
++
++ fan@0 {
++ reg = <0x02>;
++ aspeed,fan-tach-ch = /bits/ 8 <0x04>;
++ };
++
++ fan@1 {
++ reg = <0x02>;
++ aspeed,fan-tach-ch = /bits/ 8 <0x05>;
++ };
++
++ fan@2 {
++ reg = <0x03>;
++ aspeed,fan-tach-ch = /bits/ 8 <0x06>;
++ };
++
++ fan@3 {
++ reg = <0x03>;
++ aspeed,fan-tach-ch = /bits/ 8 <0x07>;
++ };
++
++ fan@4 {
++ reg = <0x04>;
++ aspeed,fan-tach-ch = /bits/ 8 <0x08>;
++ };
++
++ fan@5 {
++ reg = <0x04>;
++ aspeed,fan-tach-ch = /bits/ 8 <0x09>;
++ };
++
++ fan@6 {
++ reg = <0x05>;
++ aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
++ };
++
++ fan@7 {
++ reg = <0x05>;
++ aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
++ };
++
++ fan@8 {
++ reg = <0x06>;
++ aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
++ };
++
++ fan@9 {
++ reg = <0x06>;
++ aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
++ };
++
++ fan@10 {
++ reg = <0x07>;
++ aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
++ };
++
++ fan@11 {
++ reg = <0x07>;
++ aspeed,fan-tach-ch = /bits/ 8 <0x0f>;
++ };
++
++};
++
++&vhub {
++ status = "okay";
++};
++
++&adc {
++ status = "okay";
++};
++
++&video {
++ status = "okay";
++ memory-region = <&video_engine_memory>;
++};
++
++&gpio {
++ gpio-line-names =
++ /*A0-A7*/ "","","","S0_BMC_SPECIAL_BOOT","","","","",
++ /*B0-B7*/ "BMC_SELECT_EEPROM","","","",
++ "POWER_BUTTON","","","",
++ /*C0-C7*/ "","","","","","","","",
++ /*D0-D7*/ "","","","","","","","",
++ /*E0-E7*/ "","","","","","","","",
++ /*F0-F7*/ "","","BMC_SYS_PSON_L","S0_DDR_SAVE","PGOOD",
++ "S1_DDR_SAVE","","",
++ /*G0-G7*/ "S0_FW_BOOT_OK","SHD_REQ_L","","S0_OVERTEMP_L","","",
++ "","",
++ /*H0-H7*/ "","","","","","","","",
++ /*I0-I7*/ "","","S1_BMC_SPECIAL_BOOT","","","","","",
++ /*J0-J7*/ "S0_HIGHTEMP_L","S0_FAULT_L","S0_SCP_AUTH_FAIL_L","",
++ "","","","",
++ /*K0-K7*/ "","","","","","","","",
++ /*L0-L7*/ "","","","BMC_SYSRESET_L","SPI_AUTH_FAIL_L","","","",
++ /*M0-M7*/ "","","","","","","","",
++ /*N0-N7*/ "","","","","","","","",
++ /*O0-O7*/ "","","","","","","","",
++ /*P0-P7*/ "","","","","","","","",
++ /*Q0-Q7*/ "","","","","","UID_BUTTON","","",
++ /*R0-R7*/ "","","BMC_EXT_HIGHTEMP_L","","","RESET_BUTTON","","",
++ /*S0-S7*/ "","","","","","","","",
++ /*T0-T7*/ "","","","","","","","",
++ /*U0-U7*/ "","","","","","","","",
++ /*V0-V7*/ "","","","","","","","",
++ /*W0-W7*/ "","","","","","","","",
++ /*X0-X7*/ "","","","","","","","",
++ /*Y0-Y7*/ "","","","","","","","",
++ /*Z0-Z7*/ "S0_BMC_PLIMIT","S1_FAULT_L","S1_FW_BOOT_OK","","",
++ "S1_SCP_AUTH_FAIL_L","S1_OVERTEMP_L","",
++ /*AA0-AA7*/ "","","","","","","","",
++ /*AB0-AB7*/ "S1_HIGHTEMP_L","S1_BMC_PLIMIT","S0_BMC_DDR_ADDR",
++ "S1_BMC_DDR_ADR","","","","",
++ /*AC0-AC7*/ "SYS_PWR_GD","","","","","BMC_READY","SLAVE_PRESENT_L",
++ "BMC_OCP_PG";
++};
+--
+2.28.0
+
diff --git a/meta-ampere/meta-jade/recipes-kernel/linux/linux-aspeed/mtjade.cfg b/meta-ampere/meta-jade/recipes-kernel/linux/linux-aspeed/mtjade.cfg
new file mode 100644
index 0000000..9afe14a
--- /dev/null
+++ b/meta-ampere/meta-jade/recipes-kernel/linux/linux-aspeed/mtjade.cfg
@@ -0,0 +1,16 @@
+#
+# BOM
+#
+CONFIG_RTC_DRV_PCF85063=y
+CONFIG_IIO_MUX=y
+CONFIG_MUX_GPIO=y
+CONFIG_I2C_MUX=y
+
+#
+# Mtjade driver build flags
+#
+CONFIG_SENSORS_IIO_HWMON=y
+CONFIG_ASPEED_ADC=y
+CONFIG_SENSORS_LM75=y
+CONFIG_I2C_SLAVE=y
+CONFIG_SENSORS_ASPEED=y
diff --git a/meta-ampere/meta-jade/recipes-kernel/linux/linux-aspeed_%.bbappend b/meta-ampere/meta-jade/recipes-kernel/linux/linux-aspeed_%.bbappend
new file mode 100644
index 0000000..109cc07
--- /dev/null
+++ b/meta-ampere/meta-jade/recipes-kernel/linux/linux-aspeed_%.bbappend
@@ -0,0 +1,7 @@
+FILESEXTRAPATHS_prepend_mtjade := "${THISDIR}/${PN}:"
+
+SRC_URI += " \
+ file://${MACHINE}.cfg \
+ file://0001-ARM-dts-aspeed-Add-device-tree-for-Ampere-s-Mt.-Jade.patch \
+"
+
diff --git a/meta-ampere/meta-jade/recipes-phosphor/packagegroups/packagegroup-obmc-apps.bbappend b/meta-ampere/meta-jade/recipes-phosphor/packagegroups/packagegroup-obmc-apps.bbappend
new file mode 100644
index 0000000..07bff93
--- /dev/null
+++ b/meta-ampere/meta-jade/recipes-phosphor/packagegroups/packagegroup-obmc-apps.bbappend
@@ -0,0 +1 @@
+RDEPENDS_${PN}-extras_append_mtjade = " phosphor-webui phosphor-image-signing"