diff --git a/meta-fii/meta-kudo/recipes-kudo/kudo-sys-utility/kudo-boot/host-powerctrl.service b/meta-fii/meta-kudo/recipes-kudo/kudo-sys-utility/kudo-boot/host-powerctrl.service
new file mode 100644
index 0000000..2a8d739
--- /dev/null
+++ b/meta-fii/meta-kudo/recipes-kudo/kudo-sys-utility/kudo-boot/host-powerctrl.service
@@ -0,0 +1,12 @@
+[Unit]
+Description = Ampere Host Power Control Sequence
+
+[Service]
+Restart=no
+RemainAfterExit=true
+Type=oneshot
+ExecStart=/usr/bin/init_once.sh
+StandardOutput=syslog
+
+[Install]
+WantedBy=sysinit.target
diff --git a/meta-fii/meta-kudo/recipes-kudo/kudo-sys-utility/kudo-boot/init_once.sh b/meta-fii/meta-kudo/recipes-kudo/kudo-sys-utility/kudo-boot/init_once.sh
new file mode 100644
index 0000000..1e928e5
--- /dev/null
+++ b/meta-fii/meta-kudo/recipes-kudo/kudo-sys-utility/kudo-boot/init_once.sh
@@ -0,0 +1,27 @@
+#!/bin/bash
+
+source /usr/sbin/kudo-lib.sh
+
+# set all mux route to CPU before power on host
+# BMC_CPU_RTC_I2C_SEL #120
+set_gpio_ctrl 120 out 1
+# BMC_CPU_DDR_I2C_SEL #84
+set_gpio_ctrl 84 out 1
+# BMC_CPU_EEPROM_I2C_SEL #85
+set_gpio_ctrl 85 out 1
+# BMC_CPU_PMBUS_SEL #86
+set_gpio_ctrl 86 out 1
+
+# LED control
+# LED_BMC_LIVE #0
+set_gpio_ctrl 0 out 1
+
+# SPI control
+# Send command to CPLD to switch the bios spi interface to host
+i2cset -y -f -a 13 0x76 0x10 0x00
+
+# Power control
+# MON_BMC_ALIVE, GPIO 10
+set_gpio_ctrl 10 out 1
+# S0_BMC_OK, GPIO 69
+set_gpio_ctrl 69 out 1