poky: refresh thud: b904775c2b..7c76c5d78b

Update poky to thud HEAD.

Adam Trhon (1):
      icecc-env: don't raise error when icecc not installed

Alexander Kanavin (1):
      openssl10: update to 1.0.2q

Armin Kuster (1):
      perl: add testdepends for ssh

Bruce Ashfield (2):
      linux-yocto/4.18: update to v4.18.26
      linux-yocto/4.18: update to v4.18.27

Changqing Li (1):
      checklayer: generate locked-sigs.inc under builddir

Dan Dedrick (2):
      devtool: remove duplicate overrides
      devtool: improve git repo checks before check_commits logic

Daniel Ammann (1):
      ref-manual: Typo found and fixed.

Douglas Royds (2):
      openssl ptest: Strip build host paths from configdata.pm
      openssl: Strip perl version from installed ptest configdata.pm file

Dustin Bain (1):
      busybox: update to 1.29.3

Jan Kiszka (1):
      oe-git-proxy: Avoid resolving NO_PROXY against local files

Jens Rehsack (1):
      avahi: avoid depending on skipped package

Jonas Bonn (1):
      keymaps: tighten package write dependency

Kai Kang (1):
      selftest/wic: update test case test_qemu

Khem Raj (3):
      openssl10: Fix mutliple include assumptions for bn.h in opensslconf.h
      send-error-report: Use https instead of http protocol
      multilib_header_wrapper.h: Use #pragma once

Leonardo Augusto (1):
      scripts/lib/wic/engine: Fix cp's target path for ext* filesystems

Liu Haitao (1):
      iw: fix parsing of WEP keys

Mingli Yu (1):
      logrotate.py: restore /etc/logrotate.d/wtmp

Otavio Salvador (1):
      linux-firmware: Bump to 710963f revision

Ovidiu Panait (1):
      ghostscript: Fix CVE-2019-6116

Peter Kjellerstedt (1):
      libaio: Extend to native

Richard Purdie (23):
      package: Add pkg_postinst_ontarget to PACKAGEVARS
      oeqa/runtime/ptest: Avoid traceback for tests with no section
      oeqa/utils/logparser: Simplify ptest log parsing code
      oeqa/logparser: Further simplification/clarification
      oeqa/logparser: Reform the ptest results parser
      oeqa/utils/logparser: Add in support for duration, exitcode and logs by section
      oeqa/logparser: Improve results handling
      oeqa/logparser: Various misc cleanups
      oeqa/runtime/ptest: Ensure OOM errors are logged
      scripts/contrib/build-perf-test-wrapper.sh: Improve interaction with autobuilder automation
      scripts/contrib/build-perf-test.sh: Remove it
      oe-build-perf-report: Allow branch without hostname
      oe-build-perf-report: Allow commits from different branches
      oe-build-perf-report: Improve branch comparision handling
      oe-build-perf-report: Fix missing buildstats comparisions
      wic/engine: Fix missing parted autobuilder failures
      lib/buildstats: Improve error message
      scripts/oe-git-archive: Separate out functionality to library function
      oe-build-perf-report/gitarchive: Move common useful functions to library
      bitbake: runqueue: Fix dependency loop analysis 'hangs'
      bitbake: runqueue: Filter out multiconfig dependencies from BB_TASKDEPDATA
      bitbake: siggen: Fix multiconfig corner case
      bitbake: cooker: Tweak multiconfig dependency resolution

Robert Yang (5):
      bluez5: Fix a race issue for tools
      yocto-check-layer-wrapper: Fix path for oe-init-build-env
      checklayer: Avoid adding the layer if it is already present
      runqemu: Let qemuparams override default settings
      runqemu: Make QB_MEM easier to set

Ross Burton (3):
      e2fsprogs: fix file system generation with large files
      linux-firmware: recommend split up packages
      linux-firmware: split out liquidio firmware

Scott Rifenbark (2):
      poky.ent: Updated "meta-intel" version to "10.1"
      overview-manual, mega-manual: Updated Package Feeds diagram

Serhey Popovych (1):
      openssl: Skip assembler optimized code for powerpc64 with musl

William Bourque (1):
      wic/engine.py: Load paths from PATH environment variable

Xulin Sun (1):
      openssl: fix multilib file install conflicts

Zheng Ruoqin (1):
      mdadm: add init and service scripts

Change-Id: Ib14c2fb69d25d84aa3d4bf0a6715bba57d1eb900
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
diff --git a/poky/meta/recipes-devtools/e2fsprogs/e2fsprogs/0001-create_inode-fix-copying-large-files.patch b/poky/meta/recipes-devtools/e2fsprogs/e2fsprogs/0001-create_inode-fix-copying-large-files.patch
new file mode 100644
index 0000000..c89581d
--- /dev/null
+++ b/poky/meta/recipes-devtools/e2fsprogs/e2fsprogs/0001-create_inode-fix-copying-large-files.patch
@@ -0,0 +1,50 @@
+Upstream-Status: Submitted
+Signed-off-by: Ross Burton <ross.burton@intel.com>
+
+From 674ab87b8338372338d20e21a350f88b4ff6c7c8 Mon Sep 17 00:00:00 2001
+From: Ross Burton <ross.burton@intel.com>
+Date: Fri, 1 Feb 2019 10:59:59 +0000
+Subject: [PATCH] create_inode: fix copying large files
+
+When copying large files into a ext filesystem at mkfs time the copy fails at
+2^31 bytes in.  There are two problems:
+
+copy_file_chunk() passes an offset (off_t, 64-bit typically) to
+ext2fs_file_lseek() which expects a ext2_off_t (typedef to __u32) so the value
+is truncated. Solve by calling ext2fs_file_llseek() which takes a u64 offset
+instead.
+
+try_lseek_copy() rounds the data and hole offsets as found by lseek() to block
+boundaries, but the calculation gets truncated to 32-bits.  Solve by casting the
+32-bit blocksize to off_t to ensure this doesn't happen.
+
+Signed-off-by: Ross Burton <ross.burton@intel.com>
+---
+ misc/create_inode.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/misc/create_inode.c b/misc/create_inode.c
+index 05aa6363..f106dcda 100644
+--- a/misc/create_inode.c
++++ b/misc/create_inode.c
+@@ -438,7 +438,7 @@ static errcode_t copy_file_chunk(ext2_filsys fs, int fd, ext2_file_t e2_file,
+ 				ptr += blen;
+ 				continue;
+ 			}
+-			err = ext2fs_file_lseek(e2_file, off + bpos,
++			err = ext2fs_file_llseek(e2_file, off + bpos,
+ 						EXT2_SEEK_SET, NULL);
+ 			if (err)
+ 				goto fail;
+@@ -481,7 +481,7 @@ static errcode_t try_lseek_copy(ext2_filsys fs, int fd, struct stat *statbuf,
+ 			return EXT2_ET_UNIMPLEMENTED;
+ 
+ 		data_blk = data & ~(fs->blocksize - 1);
+-		hole_blk = (hole + (fs->blocksize - 1)) & ~(fs->blocksize - 1);
++		hole_blk = (hole + (off_t)(fs->blocksize - 1)) & ~(off_t)(fs->blocksize - 1);
+ 		err = copy_file_chunk(fs, fd, e2_file, data_blk, hole_blk, buf,
+ 				      zerobuf);
+ 		if (err)
+-- 
+2.11.0
+