|author||Andrew Geissler <firstname.lastname@example.org>||Wed Mar 31 13:36:22 2021 -0500|
|committer||Brad Bishop <email@example.com>||Tue Apr 06 13:22:18 2021 +0000|
meta-security: subtree update:9504d02694..775870980b Armin Kuster (13): libtpm: update to 0.8.2 ibmtpm2tss: update to 1.6.0 tpm2-abrmd: update to 2.4.0 tpm2-tools: update to 5.0 tpm2-tss: update to 3.0.3 tpm2-pkcs11: update to 1.5.0 tpm2-topt: update 0.3.0 trousers: update to 0.3.15 tpm-tools: update to 126.96.36.199 python3-fail2ban: fix building with ptest enabled layer.conf: Add hardknott to LAYERSERIES_COMPAT tpm2-tss-engine: update 1.1.0 swtpm: update to 0.5.2 Kai Kang (1): samhain: fix compile error on powerpc Ming Liu (1): ima-evm-keys: add file-checksums to IMA_EVM_X509 lukasz plachno (1): fscryptctl: Fix installation path Signed-off-by: Andrew Geissler <firstname.lastname@example.org> Change-Id: Id7215a394e0c10c60e0e2e4a43d4ce4fb622fa97
The OpenBMC project can be described as a Linux distribution for embedded devices that have a BMC; typically, but not limited to, things like servers, top of rack switches or RAID appliances. The OpenBMC stack uses technologies such as Yocto, OpenEmbedded, systemd, and D-Bus to allow easy customization for your server platform.
sudo apt-get install -y git build-essential libsdl1.2-dev texinfo gawk chrpath diffstat
sudo dnf install -y git patch diffstat texinfo chrpath SDL-devel bitbake \ rpcgen perl-Thread-Queue perl-bignum perl-Crypt-OpenSSL-Bignum sudo dnf groupinstall "C Development Tools and Libraries"
git clone email@example.com:openbmc/openbmc.git cd openbmc
Any build requires an environment set up according to your hardware target. There is a special script in the root of this repository that can be used to configure the environment as needed. The script is called
setup and takes the name of your hardware target as an argument.
The script needs to be sourced while in the top directory of the OpenBMC repository clone, and, if run without arguments, will display the list of supported hardware targets, see the following example:
$ . setup <machine> [build_dir] Target machine must be specified. Use one of: centriq2400-rep nicole stardragon4800-rep2 f0b olympus swift fp5280g2 olympus-nuvoton tiogapass gsj on5263m5 vesnin hr630 palmetto witherspoon hr855xg2 qemuarm witherspoon-128 lanyang quanta-q71l witherspoon-tacoma mihawk rainier yosemitev2 msn romulus zaius neptune s2600wf
Once you know the target (e.g. romulus), source the
setup script as follows:
. setup romulus build
For evb-ast2500, please use the below command to specify the machine config, because the machine in
meta-aspeed layer is in a BSP layer and does not build the openbmc image.
TEMPLATECONF=meta-evb/meta-evb-aspeed/meta-evb-ast2500/conf . openbmc-env
Additional details can be found in the docs repository.
The OpenBMC community maintains a set of tutorials new users can go through to get up to speed on OpenBMC development out here
Commits submitted by members of the OpenBMC GitHub community are compiled and tested via our Jenkins server. Commits are run through two levels of testing. At the repository level the makefile
make check directive is run. At the system level, the commit is built into a firmware image and run with an arm-softmmu QEMU model against a barrage of CI tests.
Commits submitted by non-members do not automatically proceed through CI testing. After visual inspection of the commit, a CI run can be manually performed by the reviewer.
Support of additional hardware and software packages is always welcome. Please follow the contributing guidelines when making a submission. It is expected that contributions contain test cases.
Issues are managed on GitHub. It is recommended you search through the issues before opening a new one.
First, please do a search on the internet. There's a good chance your question has already been asked.
For technical discussions, please see contact info below for Discord and mailing list information. Please don't file an issue to ask a question. You'll get faster results by using the mailing list or Discord.
Features In Progress
Features Requested but need help
Dive deeper into OpenBMC by opening the docs repository.
The Technical Steering Committee (TSC) guides the project. Members are: