poky: subtree update:745e38ff0f..81f9e815d3

Adrian Bunk (6):
      openssl: Upgrade 1.1.1c -> 1.1.1d
      glib-2.0: Upgrade 2.60.6 -> 2.60.7
      lttng-modules: Upgrade 2.10.10 -> 2.10.11
      lttng-ust: Upgrade 2.10.4 -> 2.10.5
      squashfs-tools: Remove UPSTREAM_CHECK_COMMITS
      libmpc: Remove dead UPSTREAM_CHECK_URI

Alexander Kanavin (2):
      runqemu: decouple gtk and gl options
      strace: add a timeout for running ptests

Alistair Francis (1):
      gdb: Mark gdbserver as ALLOW_EMPTY for riscv32

Andre McCurdy (9):
      busybox: drop unused mount.busybox and umount.busybox wrappers
      busybox: drop inittab from SRC_URI ( now moved to busybox-inittab )
      busybox-inittab: minor formatting tweaks
      base-files: drop legacy empty file /etc/default/usbd
      busybox: rcS and rcK should not be writeable by everyone
      ffmpeg: add PACKAGECONFIG controls for alsa and zlib (enable by default)
      libwebp: apply ARM specific config options to big endian ARM
      initscripts: enable alignment.sh init script for big endian ARM
      libunwind: apply configure over-ride to both big and little endian ARM

Andrew F. Davis (4):
      libepoxy: Disable x11 when not building for x11
      cogl: Set depends to the virtual needed not explicitly on Mesa
      gtk+3: Set depends to the virtual needed not explicitly on Mesa
      weston: Set depends to the virtual needed not explicitly on Mesa

Armin Kuster (1):
      gcc: Security fix for CVE-2019-15847

Changhyeok Bae (1):
      iw: upgrade to 5.3

Changqing Li (2):
      classextend.py: don't extend file for file dependency
      report-error.bbclass: add local.conf/auto.conf into error report

Chen Qi (1):
      python-numpy: fix build for libn32

Daniel Gomez (1):
      lttng-modules: Add missing SRCREV_FORMAT

Diego Rondini (1):
      initramfs-framework: support PARTLABEL option

Dmitry Eremin-Solenikov (7):
      image-uefi.conf: add config file holding configuration for UEFI images
      grub-bootconf: switch to image-uefi.conf
      grub-efi: switch to image-uefi.conf
      grub-efi.bbclass: switch to image-uefi.conf
      systemd-boot: switch to image-uefi.conf
      systemd-boot.bbclass: switch to image-uefi.conf
      live-vm-common.bbclass: provide efi population functions for live images

Hector Palacios (1):
      udev-extraconf: skip mounting partitions already mounted by systemd

Henning Schild (6):
      oe-git-proxy: allow setting SOCAT from outside
      oeqa: add case for oe-git-proxy
      Revert "oe-git-proxy: Avoid resolving NO_PROXY against local files"
      oe-git-proxy: disable shell pathname expansion for the whole script
      oe-git-proxy: NO_PROXY suffix matching without wildcard for match_host
      oe-git-proxy: fix dash "Bad substitution"

Hongxu Jia (1):
      elfutils: 0.176 -> 0.177

Jack Mitchell (1):
      iptables: add systemd helper unit to load/restore rules

Jaewon Lee (1):
      populate_sdk_ext: Introduce mechanism to keep nativesdk* sstate in esdk

Jason Wessel (1):
      gnupg: Extend -native wrapper to fix gpgme-native's gpgconf problems

Jiang Lu (2):
      glib-networking:enable glib-networking build as native package
      libsoup:enable libsoup build as native package

Joshua Watt (4):
      sstatesig: Update server URI
      Remove SSTATE_HASHEQUIV_SERVER
      bitbake: bitbake: Rework hash equivalence
      classes/archiver: Fix WORKDIR for shared source

Kai Kang (1):
      systemd: provides ${base_sbindir}/udevadm

Khem Raj (10):
      ptrace: Drop ptrace aid for musl/ppc
      elfutils: Fix build on ppc/musl
      cogl: Do not depend PN-dev on empty PN
      musl: Update to latest master
      glibc: Move DISTRO_FEATURE specific do_install code for target recipe only
      populate_sdk_base.bbclass: nativesdk-glibc-locale is required on musl too
      nativesdk.bbclass: Clear out LIBCEXTENSION and ABIEXTENSION
      openssl: Enable os option for with-rand-seed as well
      weston-init: Add possibility to run weston as non-root user
      layer.conf: Remove weston-conf from SIGGEN_EXCLUDE_SAFE_RECIPE_DEPS

Li Zhou (1):
      qemu: Security Advisory - qemu - CVE-2019-15890

Limeng (1):
      tune-cortexa57-cortexa53: add tunes for ARM Cortex-A53-Cortex-A57

Martin Jansa (2):
      perf: fix build on kernels which don't have ${S}/tools/include/linux/bits.h
      bitbake: Revert "bitbake: cooker: Ensure bbappends are found in stable order"

Maxime Roussin-BĂ©langer (1):
      meta: add missing descriptions and homepage in bsp

Mikko Rapeli (2):
      busybox.inc: handle empty DEBUG_PREFIX_MAP
      bitbake: svn fetcher: allow "svn propget svn:externals" to fail

Nathan Rossi (7):
      resulttool: Handle multiple series containing ptestresults
      gcc-cross.inc: Process binaries in build dir to be relocatable
      oeqa/core/case.py: Add OEPTestResultTestCase for ptestresult helpers
      oeqa/selftest: Rework toolchain tests to use OEPTestResultTestCase
      glibc-testsuite: SkipRecipe if libc is not glibc
      cmake: 3.15.2 -> 3.15.3
      meson.bbclass: Handle microblaze* mapping to cpu family

Oleksandr Kravchuk (5):
      python3-pygobject: update to 3.34.0
      font-util: update to 1.3.2
      expat: update to 2.2.8
      curl: update to 7.66.0
      python3-dbus: update to 1.2.12

Otavio Salvador (1):
      mesa: Upgrade 19.1.1 -> 19.1.6

Peter Kjellerstedt (3):
      glibc: Make it build without ldconfig in DISTRO_FEATURES
      package_rpm.bbclass: Remove a misleading bb.note()
      tzdata: Correct the packaging of /etc/localtime and /etc/timezone

Quentin Schulz (1):
      externalsrc: stop rebuilds of 2+ externalsrc recipes sharing the same git repo

Randy MacLeod (4):
      valgrind: enable ~500 more ptests
      valgrind: make a few more ptests pass
      valgrind: ptest improvements to run-ptest and more
      valgrind: disable 256 ptests for aarch64

Richard Purdie (8):
      bitbake: runqueue/siggen: Optimise hash equiv queries
      runqemu: Mention snapshot in the help output
      initramfs-framework: support PARTLABEL option
      systemd: Handle slow to boot mips hwdb update timeouts
      meta-extsdk: Either an sstate task is a proper task or it isn't
      oeqa/concurrenttest: Use ionice to delete build directories
      bitbake: utils: Add ionice option to prunedir
      build-appliance-image: Update to master head revision

Robert Yang (2):
      conf/multilib.conf: Add ovmf to NON_MULTILIB_RECIPES
      bitbake: runqueue: validate_hashes(): currentcount should be a number

Ross Burton (16):
      libtasn1: fix build with api-documentation enabled
      gstreamer1.0-libav: enable gtk-doc again
      python3: handle STAGING_LIBDIR/INCDIR being unset
      mesa: no need to depend on target python3
      adwaita-icon-theme: fix rare install race
      oeqa/selftest/wic: improve assert messages in test_fixed_size
      oeqa/selftest/imagefeatures: dump the JSON if it can't be parsed
      libical: upgrade to 3.0.6
      acpica: upgrade 20190509 -> 20190816
      gdk-pixbuf: upgrade 2.38.1 -> 2.38.2
      piglit: upgrade to latest revision
      libinput: upgrade 1.14.0 -> 1.14.1
      rootfs-postcommands: check /etc/gconf exists before working on it
      systemd-systemctl-native: don't care about line endings
      opkg-utils: respect SOURCE_DATE_EPOCH when building ipkgs
      bitbake: fetch2/git: add git-lfs toggle option

Scott Murray (1):
      systemd: upgrade to 243

Stefan Ghinea (1):
      ghostscript: CVE-2019-14811, CVE-2019-14817

Tim Blechmann (1):
      icecc: blacklist pixman

Yeoh Ee Peng (3):
      bitbake: bitbake-layers: show-recipes: Show recipes only
      bitbake: bitbake-layers: show-recipes: Select recipes from selected layer
      bitbake: bitbake-layers: show-recipes: Enable bare output

Yi Zhao (3):
      screen: add /etc/screenrc as global config file
      nfs-utils: fix nfs mount error on 32bit nfs server
      grub: remove diffutils and freetype runtime dependencies

Zang Ruochen (2):
      btrfs-tools:upgrade 5.2.1 -> 5.2.2
      timezone:upgrade 2019b -> 2019c

Change-Id: I1ec24480a8964e474cd99d60a0cb0975e49b46b8
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
202 files changed
tree: b8f41acc23015f7f1de01de3c87c434195c681d4
  1. .github/
  2. meta-arm/
  3. meta-aspeed/
  4. meta-evb/
  5. meta-facebook/
  6. meta-google/
  7. meta-hxt/
  8. meta-ibm/
  9. meta-ingrasys/
  10. meta-inspur/
  11. meta-intel/
  12. meta-inventec/
  13. meta-lenovo/
  14. meta-mellanox/
  15. meta-microsoft/
  16. meta-nuvoton/
  17. meta-openembedded/
  18. meta-openpower/
  19. meta-phosphor/
  20. meta-portwell/
  21. meta-qualcomm/
  22. meta-quanta/
  23. meta-raspberrypi/
  24. meta-security/
  25. meta-x86/
  26. meta-xilinx/
  27. meta-yadro/
  28. poky/
  29. .gitignore
  30. .gitreview
  31. .templateconf
  32. MAINTAINERS
  33. openbmc-env
  34. README.md
  35. setup
README.md

OpenBMC

Build Status

The OpenBMC project can be described as a Linux distribution for embedded devices that have a BMC; typically, but not limited to, things like servers, top of rack switches or RAID appliances. The OpenBMC stack uses technologies such as Yocto, OpenEmbedded, systemd, and D-Bus to allow easy customization for your server platform.

Setting up your OpenBMC project

1) Prerequisite

  • Ubuntu 14.04
sudo apt-get install -y git build-essential libsdl1.2-dev texinfo gawk chrpath diffstat
  • Fedora 28
sudo dnf install -y git patch diffstat texinfo chrpath SDL-devel bitbake \
    rpcgen perl-Thread-Queue perl-bignum perl-Crypt-OpenSSL-Bignum
sudo dnf groupinstall "C Development Tools and Libraries"

2) Download the source

git clone git@github.com:openbmc/openbmc.git
cd openbmc

3) Target your hardware

Any build requires an environment variable known as TEMPLATECONF to be set to a hardware target. You can see all of the known targets with find meta-* -name local.conf.sample. Choose the hardware target and then move to the next step. Additional examples can be found in the OpenBMC Cheatsheet

MachineTEMPLATECONF
Palmettometa-ibm/meta-palmetto/conf
Zaiusmeta-ingrasys/meta-zaius/conf
Witherspoonmeta-ibm/meta-witherspoon/conf
Romulusmeta-ibm/meta-romulus/conf

As an example target Palmetto

export TEMPLATECONF=meta-ibm/meta-palmetto/conf

4) Build

. openbmc-env
bitbake obmc-phosphor-image

Additional details can be found in the docs repository.

Build Validation and Testing

Commits submitted by members of the OpenBMC GitHub community are compiled and tested via our Jenkins server. Commits are run through two levels of testing. At the repository level the makefile make check directive is run. At the system level, the commit is built into a firmware image and run with an arm-softmmu QEMU model against a barrage of CI tests.

Commits submitted by non-members do not automatically proceed through CI testing. After visual inspection of the commit, a CI run can be manually performed by the reviewer.

Automated testing against the QEMU model along with supported systems are performed. The OpenBMC project uses the Robot Framework for all automation. Our complete test repository can be found here.

Submitting Patches

Support of additional hardware and software packages is always welcome. Please follow the contributing guidelines when making a submission. It is expected that contributions contain test cases.

Bug Reporting

Issues are managed on GitHub. It is recommended you search through the issues before opening a new one.

Features of OpenBMC

Feature List

  • Host management: Power, Cooling, LEDs, Inventory, Events, Watchdog
  • Full IPMI 2.0 Compliance with DCMI
  • Code Update Support for multiple BMC/BIOS images
  • Web-based user interface
  • REST interfaces
  • D-Bus based interfaces
  • SSH based SOL
  • Remote KVM
  • Hardware Simulation
  • Automated Testing

Features In Progress

  • OpenCompute Redfish Compliance
  • User management
  • Virtual media
  • Verified Boot

Features Requested but need help

  • OpenBMC performance monitoring

Finding out more

Dive deeper into OpenBMC by opening the docs repository.

Contact