reset meta-xilinx subtree on master HEAD(874b9cee5e)

Change-Id: Ic0716e95ff53e7d63c54dc5fce6ee42fc99ed424
diff --git a/meta-xilinx/meta-microblaze/recipes-devtools/binutils/binutils/0010-Add-new-bit-field-instructions.patch b/meta-xilinx/meta-microblaze/recipes-devtools/binutils/binutils/0010-Add-new-bit-field-instructions.patch
new file mode 100644
index 0000000..1612c11
--- /dev/null
+++ b/meta-xilinx/meta-microblaze/recipes-devtools/binutils/binutils/0010-Add-new-bit-field-instructions.patch
@@ -0,0 +1,231 @@
+From 0034d6b5231a0a72c5f9fc47ba4c8eba0c35ff39 Mon Sep 17 00:00:00 2001
+From: Nagaraju Mekala <nmekala@xilix.com>
+Date: Mon, 18 Jul 2016 12:24:28 +0530
+Subject: [PATCH 10/40] Add new bit-field instructions
+
+This patches adds new bsefi and bsifi instructions.
+BSEFI- The instruction shall extract a bit field from a
+register and place it right-adjusted in the destination register.
+The other bits in the destination register shall be set to zero
+BSIFI- The instruction shall insert a right-adjusted bit field
+from a register at another position in the destination register.
+The rest of the bits in the destination register shall be unchanged
+
+Signed-off-by :Nagaraju Mekala <nmekala@xilix.com>
+---
+ gas/config/tc-microblaze.c | 71 +++++++++++++++++++++++++++++++++++++-
+ opcodes/microblaze-dis.c   | 17 +++++++++
+ opcodes/microblaze-opc.h   | 12 ++++++-
+ opcodes/microblaze-opcm.h  |  6 +++-
+ 4 files changed, 103 insertions(+), 3 deletions(-)
+
+diff --git a/gas/config/tc-microblaze.c b/gas/config/tc-microblaze.c
+index 74a63abeb0c..765abfb3885 100644
+--- a/gas/config/tc-microblaze.c
++++ b/gas/config/tc-microblaze.c
+@@ -917,7 +917,7 @@ md_assemble (char * str)
+   unsigned reg2;
+   unsigned reg3;
+   unsigned isize;
+-  unsigned int immed, temp;
++  unsigned int immed, immed2, temp;
+   expressionS exp;
+   char name[20];
+ 
+@@ -1172,7 +1172,76 @@ md_assemble (char * str)
+       inst |= (reg2 << RA_LOW) & RA_MASK;
+       inst |= (immed << IMM_LOW) & IMM5_MASK;
+       break;
++ case INST_TYPE_RD_R1_IMM5_IMM5:
++      if (strcmp (op_end, ""))
++        op_end = parse_reg (op_end + 1, &reg1);  /* Get rd.  */
++      else
++	{
++          as_fatal (_("Error in statement syntax"));
++          reg1 = 0;
++        }
++      if (strcmp (op_end, ""))
++        op_end = parse_reg (op_end + 1, &reg2);  /* Get r1.  */
++      else
++	{
++          as_fatal (_("Error in statement syntax"));
++          reg2 = 0;
++        }
++
++      /* Check for spl registers.  */
++      if (check_spl_reg (&reg1))
++        as_fatal (_("Cannot use special register with this instruction"));
++      if (check_spl_reg (&reg2))
++        as_fatal (_("Cannot use special register with this instruction"));
+ 
++      /* Width immediate value.  */
++      if (strcmp (op_end, ""))
++        op_end = parse_imm (op_end + 1, &exp, MIN_IMM_WIDTH, MAX_IMM_WIDTH);
++      else
++        as_fatal (_("Error in statement syntax"));
++      if (exp.X_op != O_constant)
++	{
++          as_warn (_("Symbol used as immediate width value for bit field instruction"));
++          immed = 1;
++        }
++      else
++        immed = exp.X_add_number;
++      if (opcode->instr == bsefi && immed > 31)
++        as_fatal (_("Width value must be less than 32"));
++
++      /* Shift immediate value.  */
++      if (strcmp (op_end, ""))
++        op_end = parse_imm (op_end + 1, &exp, MIN_IMM, MAX_IMM);
++      else
++        as_fatal (_("Error in statement syntax"));
++      if (exp.X_op != O_constant)
++	    {
++          as_warn (_("Symbol used as immediate shift value for bit field instruction"));
++          immed2 = 0;
++        }
++      else
++	    {
++          output = frag_more (isize);
++          immed2 = exp.X_add_number;
++	    }
++      if (immed2 != (immed2 % 32))
++	    {
++          as_warn (_("Shift value greater than 32. using <value %% 32>"));
++          immed2 = immed2 % 32;
++        }
++
++      /* Check combined value.  */
++      if (immed + immed2 > 32)
++        as_fatal (_("Width value + shift value must not be greater than 32"));
++
++      inst |= (reg1 << RD_LOW) & RD_MASK;
++      inst |= (reg2 << RA_LOW) & RA_MASK;
++      if (opcode->instr == bsefi)
++        inst |= (immed & IMM5_MASK) << IMM_WIDTH_LOW; /* bsefi */
++      else
++        inst |= ((immed + immed2 - 1) & IMM5_MASK) << IMM_WIDTH_LOW; /* bsifi */
++      inst |= (immed2 << IMM_LOW) & IMM5_MASK;
++      break;
+     case INST_TYPE_R1_R2:
+       if (strcmp (op_end, ""))
+         op_end = parse_reg (op_end + 1, &reg1);  /* Get r1.  */
+diff --git a/opcodes/microblaze-dis.c b/opcodes/microblaze-dis.c
+index be1534c257c..52c9068805f 100644
+--- a/opcodes/microblaze-dis.c
++++ b/opcodes/microblaze-dis.c
+@@ -90,6 +90,18 @@ get_field_imm5_mbar (struct string_buf *buf, long instr)
+   return p;
+ }
+ 
++static char *
++get_field_imm5width (struct string_buf *buf, long instr)
++{
++  char *p = strbuf (buf);
++
++  if (instr & 0x00004000)
++    sprintf (p, "%d", (short)(((instr & IMM5_WIDTH_MASK) >> IMM_WIDTH_LOW))); /* bsefi */
++ else
++    sprintf (p, "%d", (short)(((instr & IMM5_WIDTH_MASK) >> IMM_WIDTH_LOW) - ((instr & IMM5_MASK) >> IMM_LOW) + 1)); /* bsifi */
++  return p;
++}
++
+ static char *
+ get_field_rfsl (struct string_buf *buf, long instr)
+ {
+@@ -428,6 +440,11 @@ print_insn_microblaze (bfd_vma memaddr, struct disassemble_info * info)
+ 	case INST_TYPE_NONE:
+ 	  break;
+ 	  /* For tuqula instruction */
++        /* For bit field insns.  */
++	case INST_TYPE_RD_R1_IMM5_IMM5:
++	  print_func (stream, "\t%s, %s, %s, %s", get_field_rd (&buf, inst), get_field_r1(&buf, inst), get_field_imm5width (&buf, inst), get_field_imm5 (&buf, inst));
++	  break;
++	/* For tuqula instruction */
+ 	case INST_TYPE_RD:
+ 	  print_func (stream, "\t%s", get_field_rd (&buf, inst));
+ 	  break;
+diff --git a/opcodes/microblaze-opc.h b/opcodes/microblaze-opc.h
+index c7a506b845a..f61f4ef66d9 100644
+--- a/opcodes/microblaze-opc.h
++++ b/opcodes/microblaze-opc.h
+@@ -59,6 +59,9 @@
+ /* For mbar.  */
+ #define INST_TYPE_IMM5 20
+ 
++/* For bsefi and bsifi */
++#define INST_TYPE_RD_R1_IMM5_IMM5  21
++
+ #define INST_TYPE_NONE 25
+ 
+ 
+@@ -89,7 +92,9 @@
+ #define OPCODE_MASK_H124  0xFFFF07FF /* High 16, and low 11 bits.  */
+ #define OPCODE_MASK_H1234 0xFFFFFFFF /* All 32 bits.  */
+ #define OPCODE_MASK_H3  0xFC000600  /* High 6 bits and bits 21, 22.  */
++#define OPCODE_MASK_H3B 0xFC00C600  /* High 6 bits and bits 16, 17, 21, 22.  */
+ #define OPCODE_MASK_H32 0xFC00FC00  /* High 6 bits and bit 16-21.  */
++#define OPCODE_MASK_H32B 0xFC00C000  /* High 6 bits and bit 16, 17.  */
+ #define OPCODE_MASK_H34B 0xFC0000FF /* High 6 bits and low 8 bits.  */
+ #define OPCODE_MASK_H35B 0xFC0004FF /* High 6 bits and low 9 bits.  */
+ #define OPCODE_MASK_H34C 0xFC0007E0 /* High 6 bits and bits 21-26.  */
+@@ -102,7 +107,7 @@
+ #define DELAY_SLOT 1
+ #define NO_DELAY_SLOT 0
+ 
+-#define MAX_OPCODES 299
++#define MAX_OPCODES 301
+ 
+ struct op_code_struct
+ {
+@@ -159,6 +164,8 @@ struct op_code_struct
+   {"bslli", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000400, OPCODE_MASK_H3, bslli, barrel_shift_inst },
+   {"bsrai", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000200, OPCODE_MASK_H3, bsrai, barrel_shift_inst },
+   {"bsrli", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000000, OPCODE_MASK_H3, bsrli, barrel_shift_inst },
++  {"bsefi", INST_TYPE_RD_R1_IMM5_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64004000, OPCODE_MASK_H32B, bsefi, barrel_shift_inst },
++  {"bsifi", INST_TYPE_RD_R1_IMM5_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64008000, OPCODE_MASK_H32B, bsifi, barrel_shift_inst },
+   {"or",    INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x80000000, OPCODE_MASK_H4, microblaze_or, logical_inst },
+   {"and",   INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x84000000, OPCODE_MASK_H4, microblaze_and, logical_inst },
+   {"xor",   INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x88000000, OPCODE_MASK_H4, microblaze_xor, logical_inst },
+@@ -438,5 +445,8 @@ char pvr_register_prefix[] = "rpvr";
+ #define MIN_IMM5  ((int) 0x00000000)
+ #define MAX_IMM5  ((int) 0x0000001f)
+ 
++#define MIN_IMM_WIDTH  ((int) 0x00000001)
++#define MAX_IMM_WIDTH  ((int) 0x00000020)
++
+ #endif /* MICROBLAZE_OPC */
+ 
+diff --git a/opcodes/microblaze-opcm.h b/opcodes/microblaze-opcm.h
+index b05e319862e..fa921c90c98 100644
+--- a/opcodes/microblaze-opcm.h
++++ b/opcodes/microblaze-opcm.h
+@@ -29,7 +29,7 @@ enum microblaze_instr
+   addi, rsubi, addic, rsubic, addik, rsubik, addikc, rsubikc, mul,
+   mulh, mulhu, mulhsu,swapb,swaph,
+   idiv, idivu, bsll, bsra, bsrl, get, put, nget, nput, cget, cput,
+-  ncget, ncput, muli, bslli, bsrai, bsrli, mului,
++  ncget, ncput, muli, bslli, bsrai, bsrli, bsefi, bsifi, mului,
+   /* 'or/and/xor' are C++ keywords.  */
+   microblaze_or, microblaze_and, microblaze_xor,
+   andn, pcmpbf, pcmpbc, pcmpeq, pcmpne, sra, src, srl, sext8, sext16,
+@@ -129,6 +129,7 @@ enum microblaze_instr_type
+ #define RB_LOW  11 /* Low bit for RB.  */
+ #define IMM_LOW  0 /* Low bit for immediate.  */
+ #define IMM_MBAR 21 /* low bit for mbar instruction.  */
++#define IMM_WIDTH_LOW 6 /* Low bit for immediate width */
+ 
+ #define RD_MASK 0x03E00000
+ #define RA_MASK 0x001F0000
+@@ -141,6 +142,9 @@ enum microblaze_instr_type
+ /* Imm mask for mbar.  */
+ #define IMM5_MBAR_MASK 0x03E00000
+ 
++/* Imm mask for extract/insert width. */
++#define IMM5_WIDTH_MASK 0x000007C0
++
+ /* FSL imm mask for get, put instructions.  */
+ #define  RFSL_MASK 0x000000F
+ 
+-- 
+2.17.1
+