blob: c031ef2874f02c9fc74f35012025570671c721fe [file] [log] [blame]
.. SPDX-License-Identifier: CC-BY-SA-2.0-UK
*******************************************
OpenEmbedded Kickstart (``.wks``) Reference
*******************************************
.. _openembedded-kickstart-wks-reference:
Introduction
============
The current Wic implementation supports only the basic kickstart
partitioning commands: ``partition`` (or ``part`` for short) and
``bootloader``.
.. note::
Future updates will implement more commands and options. If you use
anything that is not specifically supported, results can be
unpredictable.
This chapter provides a reference on the available kickstart commands.
The information lists the commands, their syntax, and meanings.
Kickstart commands are based on the Fedora kickstart versions but with
modifications to reflect Wic capabilities. You can see the original
documentation for those commands at the following link:
http://pykickstart.readthedocs.io/en/latest/kickstart-docs.html
Command: part or partition
==========================
Either of these commands creates a partition on the system and uses the
following syntax:
::
part [mntpoint]
partition [mntpoint]
If you do not
provide mntpoint, Wic creates a partition but does not mount it.
The ``mntpoint`` is where the partition is mounted and must be in one of
the following forms:
- ``/path``: For example, "/", "/usr", or "/home"
- ``swap``: The created partition is used as swap space
Specifying a mntpoint causes the partition to automatically be mounted.
Wic achieves this by adding entries to the filesystem table (fstab)
during image generation. In order for Wic to generate a valid fstab, you
must also provide one of the ``--ondrive``, ``--ondisk``, or
``--use-uuid`` partition options as part of the command.
.. note::
The mount program must understand the PARTUUID syntax you use with
--use-uuid
and non-root
mountpoint
, including swap. The busybox versions of these application are
currently excluded.
Here is an example that uses "/" as the mountpoint. The command uses
``--ondisk`` to force the partition onto the ``sdb`` disk: part /
--source rootfs --ondisk sdb --fstype=ext3 --label platform --align 1024
Here is a list that describes other supported options you can use with
the ``part`` and ``partition`` commands:
- ``--size``: The minimum partition size in MBytes. Specify an
integer value such as 500. Do not append the number with "MB". You do
not need this option if you use ``--source``.
- ``--fixed-size``: The exact partition size in MBytes. You cannot
specify with ``--size``. An error occurs when assembling the disk
image if the partition data is larger than ``--fixed-size``.
- ``--source``: This option is a Wic-specific option that names the
source of the data that populates the partition. The most common
value for this option is "rootfs", but you can use any value that
maps to a valid source plugin. For information on the source plugins,
see the ":ref:`dev-manual/dev-manual-common-tasks:using the wic plugin interface`"
section in the Yocto Project Development Tasks Manual.
If you use ``--source rootfs``, Wic creates a partition as large as
needed and fills it with the contents of the root filesystem pointed
to by the ``-r`` command-line option or the equivalent rootfs derived
from the ``-e`` command-line option. The filesystem type used to
create the partition is driven by the value of the ``--fstype``
option specified for the partition. See the entry on ``--fstype``
that follows for more information.
If you use ``--source plugin-name``, Wic creates a partition as large
as needed and fills it with the contents of the partition that is
generated by the specified plugin name using the data pointed to by
the ``-r`` command-line option or the equivalent rootfs derived from
the ``-e`` command-line option. Exactly what those contents are and
filesystem type used are dependent on the given plugin
implementation.
If you do not use the ``--source`` option, the ``wic`` command
creates an empty partition. Consequently, you must use the ``--size``
option to specify the size of the empty partition.
- ``--ondisk`` or ``--ondrive``: Forces the partition to be created
on a particular disk.
- ``--fstype``: Sets the file system type for the partition. Valid
values are:
- ``ext4``
- ``ext3``
- ``ext2``
- ``btrfs``
- ``squashfs``
- ``swap``
- ``--fsoptions``: Specifies a free-form string of options to be used
when mounting the filesystem. This string is copied into the
``/etc/fstab`` file of the installed system and should be enclosed in
quotes. If not specified, the default string is "defaults".
- ``--label label``: Specifies the label to give to the filesystem to
be made on the partition. If the given label is already in use by
another filesystem, a new label is created for the partition.
- ``--active``: Marks the partition as active.
- ``--align (in KBytes)``: This option is a Wic-specific option that
says to start partitions on boundaries given x KBytes.
- ``--no-table``: This option is a Wic-specific option. Using the
option reserves space for the partition and causes it to become
populated. However, the partition is not added to the partition
table.
- ``--exclude-path``: This option is a Wic-specific option that
excludes the given relative path from the resulting image. This
option is only effective with the rootfs source plugin.
- ``--extra-space``: This option is a Wic-specific option that adds
extra space after the space filled by the content of the partition.
The final size can exceed the size specified by the ``--size``
option. The default value is 10 Mbytes.
- ``--overhead-factor``: This option is a Wic-specific option that
multiplies the size of the partition by the option's value. You must
supply a value greater than or equal to "1". The default value is
"1.3".
- ``--part-name``: This option is a Wic-specific option that
specifies a name for GPT partitions.
- ``--part-type``: This option is a Wic-specific option that
specifies the partition type globally unique identifier (GUID) for
GPT partitions. You can find the list of partition type GUIDs at
http://en.wikipedia.org/wiki/GUID_Partition_Table#Partition_type_GUIDs.
- ``--use-uuid``: This option is a Wic-specific option that causes
Wic to generate a random GUID for the partition. The generated
identifier is used in the bootloader configuration to specify the
root partition.
- ``--uuid``: This option is a Wic-specific option that specifies the
partition UUID.
- ``--fsuuid``: This option is a Wic-specific option that specifies
the filesystem UUID. You can generate or modify
:term:`WKS_FILE` with this option if a preconfigured
filesystem UUID is added to the kernel command line in the bootloader
configuration before you run Wic.
- ``--system-id``: This option is a Wic-specific option that
specifies the partition system ID, which is a one byte long,
hexadecimal parameter with or without the 0x prefix.
- ``--mkfs-extraopts``: This option specifies additional options to
pass to the ``mkfs`` utility. Some default options for certain
filesystems do not take effect. See Wic's help on kickstart (i.e.
``wic help kickstart``).
Command: bootloader
===================
This command specifies how the bootloader should be configured and
supports the following options:
.. note::
Bootloader functionality and boot partitions are implemented by the
various
--source
plugins that implement bootloader functionality. The bootloader
command essentially provides a means of modifying bootloader
configuration.
- ``--timeout``: Specifies the number of seconds before the
bootloader times out and boots the default option.
- ``--append``: Specifies kernel parameters. These parameters will be
added to the syslinux ``APPEND`` or ``grub`` kernel command line.
- ``--configfile``: Specifies a user-defined configuration file for
the bootloader. You can provide a full pathname for the file or a
file that exists in the ``canned-wks`` folder. This option overrides
all other bootloader options.