Squashed 'import-layers/meta-openembedded/' content from commit 247b126
Change-Id: I40827e9ce5fba63f1cca2a0be44976ae8383b4c0
git-subtree-dir: import-layers/meta-openembedded
git-subtree-split: 247b1267bbe95719cd4877d2d3cfbaf2a2f4865a
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
diff --git a/import-layers/meta-openembedded/meta-oe/recipes-extended/smartmontools/files/initd.smartd b/import-layers/meta-openembedded/meta-oe/recipes-extended/smartmontools/files/initd.smartd
new file mode 100755
index 0000000..54adcb4
--- /dev/null
+++ b/import-layers/meta-openembedded/meta-oe/recipes-extended/smartmontools/files/initd.smartd
@@ -0,0 +1,112 @@
+#! /bin/sh
+
+# smartmontools init file for smartd
+# Copyright (C) 2002-8 Bruce Allen <smartmontools-support@lists.sourceforge.net>
+# $Id: smartd.initd.in 3360 2011-06-06 19:25:36Z chrfranke $
+
+# For RedHat and cousins:
+# chkconfig: - 60 60
+# description: Self Monitoring and Reporting Technology (SMART) Daemon
+# processname: smartd
+
+# For SuSE and cousins
+### BEGIN INIT INFO
+# Provides: smartd
+# Required-Start: $syslog $remote_fs
+# Should-Start: sendmail
+# Required-Stop: $syslog $remote_fs
+# Should-Stop: sendmail
+# Default-Start: 2 3 4 5
+# Default-Stop: 0 1 6
+# Short-Description: Monitors disk and tape health via S.M.A.R.T.
+# Description: Start S.M.A.R.T. disk and tape monitor.
+### END INIT INFO
+
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the Free
+# Software Foundation; either version 2, or (at your option) any later
+# version.
+# You should have received a copy of the GNU General Public License (for
+# example COPYING); if not, write to the Free Software Foundation, Inc., 675
+# Mass Ave, Cambridge, MA 02139, USA.
+# This code was originally developed as a Senior Thesis by Michael Cornwell
+# at the Concurrent Systems Laboratory (now part of the Storage Systems
+# Research Center), Jack Baskin School of Engineering, University of
+# California, Santa Cruz. http://ssrc.soe.ucsc.edu/.
+
+# Uncomment the line below to pass options to smartd on startup.
+# Note that distribution specific configuration files like
+# /etc/{default,sysconfig}/smartmontools might override these
+#smartd_opts="--interval=1800"
+
+SMARTD_BIN=/usr/sbin/smartd
+SMARTDPID=/var/run/smartd.pid
+[ -x $SMARTD_BIN ] || exit 0
+RET=0
+
+# source configuration file
+[ -r /etc/default/rcS ] && . /etc/default/rcS
+[ -r /etc/default/smartmontools ] && . /etc/default/smartmontools
+
+smartd_opts="--pidfile $SMARTDPID $smartd_opts"
+
+case "$1" in
+ start)
+ if [ "$start_smartd" != "yes" ]; then
+ [ "$VERBOSE" != "no" ] && echo "Not starting S.M.A.R.T. daemon smartd, disabled via /etc/default/smartmontools"
+ exit 0
+ fi
+ echo -n "Starting S.M.A.R.T. daemon: smartd"
+ if start-stop-daemon --start --quiet --pidfile $SMARTDPID \
+ --exec $SMARTD_BIN -- $smartd_opts; then
+ echo "."
+ else
+ echo " (failed)"
+ RET=1
+ fi
+ ;;
+ stop)
+ echo -n "Stopping S.M.A.R.T. daemon: smartd"
+ start-stop-daemon --stop --quiet --oknodo --pidfile $SMARTDPID
+ echo "."
+ ;;
+ restart)
+ $0 stop
+ $0 start
+ ;;
+ force-reload)
+ $0 reload || $0 restart
+ ;;
+ reload)
+ echo -n "Reload S.M.A.R.T. daemon: smartd"
+ if start-stop-daemon --stop --quiet --signal 1 \
+ --pidfile $SMARTDPID; then
+ echo "."
+ else
+ echo " (failed)"
+ RET=1
+ fi
+ ;;
+ report)
+ echo -n "Checking SMART devices now"
+ if start-stop-daemon --stop --quiet --signal 10 \
+ --pidfile $SMARTDPID; then
+ echo "."
+ else
+ echo " (failed)"
+ RET=1
+ fi
+ ;;
+ status)
+ if pidof $SMARTD_BIN >/dev/null; then
+ echo "$SMARTD_BIN is running."
+ else
+ echo "$SMARTD_BIN is not running."
+ RET=1
+ fi
+ ;;
+ *)
+ echo "Usage: $0 {start|stop|restart|force-reload|reload|report|status}"
+ exit 1
+esac
+exit $RET