meta-xilinx/meta-xilinx-bsp/conf/machine/vck190-versal.conf

#@TYPE: Machine
#@NAME: vck-versal
##@DESCRIPTION: Machine support for vck-versal .

require conf/machine/include/soc-versal.inc
require conf/machine/include/machine-xilinx-default.inc
require conf/machine/include/machine-xilinx-qemu.inc

SOC_VARIANT = "-ai-core"

MACHINE_FEATURES = "rtc ext2 ext3 vfat usbhost"

UBOOT_MACHINE ?= "xilinx_versal_virt_defconfig"

SERIAL_CONSOLES ?= "115200;ttyAMA0"

# Default SD image build onfiguration, use qemu-sd to pad
IMAGE_CLASSES += "image-types-xilinx-qemu"
IMAGE_FSTYPES += "wic.qemu-sd"
WKS_FILES ?= "sdimage-bootpart.wks"

EXTRA_IMAGEDEPENDS += " \
   arm-trusted-firmware \
   virtual/boot-bin \
   virtual/bootloader \
   virtual/psm-firmware \
   virtual/plm \
   u-boot-zynq-scr \
   qemu-devicetrees \
   virtual/cdo \
"

IMAGE_BOOT_FILES += " \
    boot.bin \
    ${@bb.utils.contains('PREFERRED_PROVIDER_virtual/dtb', 'device-tree', 'system.dtb', '', d)} \
    Image \
    boot.scr \
"
PLM_DEPLOY_DIR ?= "{TOPDIR}/versalmbtmp/deploy/images/versal-mb"
PLM_IMAGE_NAME ?= "plm-versal-mb"
PSM_FIRMWARE_DEPLOY_DIR ?= "{TOPDIR}/versalmbtmp/deploy/images/versal-mb"
PSM_FIRMWARE_IMAGE_NAME ?= "psm-firmware-versal-mb"


# This machine has a QEMU model, runqemu setup:
QB_MEM = "-m 8G"
QB_DEFAULT_KERNEL = "none"
QB_NETWORK_DEVICE = ""
QB_KERNEL_CMDLINE_APPEND ?= ""
QB_NET = "none"

QB_DEFAULT_FSTYPE_qemuboot-xilinx = "wic.qemu-sd"
QB_OPT_APPEND_append_qemuboot-xilinx = " -boot mode=5"
QB_ROOTFS_OPT_qemuboot-xilinx = " -drive if=sd,index=1,file=@ROOTFS@,format=raw"

# Use booti 80000 6000000 4000000 to launch
QB_OPT_APPEND ?= " -serial null -serial null -serial mon:stdio -display none"

QB_OPT_APPEND_append_qemuboot-xilinx = " \
    -hw-dtb ${DEPLOY_DIR_IMAGE}/qemu-hw-devicetrees/multiarch/board-versal-ps-vc-p-a2197-00.dtb \
    -display none \
    -net nic -net user,tftp=${DEPLOY_DIR_IMAGE} \
    "

# PLM instance args
QB_PLM_OPT = " \
    -M microblaze-fdt \
    -device loader,file=${DEPLOY_DIR_IMAGE}/BOOT-${MACHINE}_bh.bin,addr=0xF201E000,force-raw  \
    -device loader,addr=0xf0000000,data=0xba020004,data-len=4 \
    -device loader,addr=0xf0000004,data=0xb800fffc,data-len=4 \
    -device loader,file=${DEPLOY_DIR_IMAGE}/CDO/pmc_cdo.bin,addr=0xf2000000,force-raw \
    -device loader,file=${DEPLOY_DIR_IMAGE}/plm-${MACHINE}.elf,cpu-num=1 \
    -device loader,addr=0xF1110624,data=0x0,data-len=4 \
    -device loader,addr=0xF1110620,data=0x1,data-len=4 \
    -hw-dtb ${DEPLOY_DIR_IMAGE}/qemu-hw-devicetrees/multiarch/board-versal-pmc-vc-p-a2197-00.dtb \
    -display none \
    "
QB_OPT_APPEND_append_qemuboot-xilinx = " -plm-args '${QB_PLM_OPT}'"