Import 80d60e7 from yoctoproject.org meta-arm
To support ARMv8 SoCs.
meta-arm has several patch files. Since they are maintained by the
upstream meta-arm community, add meta-arm to the ignore list in
run-repotest.
Change-Id: Ia87a2e947bbabd347d256eccc47a343e1c885479
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
diff --git a/meta-arm/meta-arm-bsp/recipes-kernel/linux/linux-yocto-5.15/n1sdp/0001-iommu-arm-smmu-v3-workaround-for-ATC_INV_SIZE_ALL-in.patch b/meta-arm/meta-arm-bsp/recipes-kernel/linux/linux-yocto-5.15/n1sdp/0001-iommu-arm-smmu-v3-workaround-for-ATC_INV_SIZE_ALL-in.patch
new file mode 100644
index 0000000..a75ca24
--- /dev/null
+++ b/meta-arm/meta-arm-bsp/recipes-kernel/linux/linux-yocto-5.15/n1sdp/0001-iommu-arm-smmu-v3-workaround-for-ATC_INV_SIZE_ALL-in.patch
@@ -0,0 +1,49 @@
+Upstream-Status: Inappropriate [Workaround]
+Signed-off-by: Manoj Kumar <manoj.kumar3@arm.com>
+
+From 949ba3f12ec1f3177a82a9228dc402ab5d8c9d60 Mon Sep 17 00:00:00 2001
+From: Manoj Kumar <manoj.kumar3@arm.com>
+Date: Mon, 1 Feb 2021 21:36:43 +0530
+Subject: [PATCH 1/5] iommu/arm-smmu-v3: workaround for ATC_INV_SIZE_ALL in
+ N1SDP
+
+ATC_INV_SIZE_ALL request should automatically translate to ATS
+address which is not happening in SMMUv3 version gone into
+N1SDP platform. This workaround manually sets the ATS address
+field to proper value for ATC_INV_SIZE_ALL command.
+
+Change-Id: If89465be94720a62be85e1e6612f17e93fa9b8a5
+Signed-off-by: Manoj Kumar <manoj.kumar3@arm.com>
+Signed-off-by: Khasim Syed Mohammed <khasim.mohammed@arm.com>
+---
+ drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 1 +
+ drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h | 1 +
+ 2 files changed, 2 insertions(+)
+
+diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
+index a388e318f86e..ceca576b0bf6 100644
+--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
++++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
+@@ -1724,6 +1724,7 @@ arm_smmu_atc_inv_to_cmd(int ssid, unsigned long iova, size_t size,
+ };
+
+ if (!size) {
++ cmd->atc.addr = ATC_INV_ADDR_ALL;
+ cmd->atc.size = ATC_INV_SIZE_ALL;
+ return;
+ }
+diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h
+index 4cb136f07914..5615ffd24e46 100644
+--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h
++++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h
+@@ -473,6 +473,7 @@ struct arm_smmu_cmdq_ent {
+
+ #define CMDQ_OP_ATC_INV 0x40
+ #define ATC_INV_SIZE_ALL 52
++ #define ATC_INV_ADDR_ALL 0x7FFFFFFFFFFFF000UL
+ struct {
+ u32 sid;
+ u32 ssid;
+--
+2.17.1
+
diff --git a/meta-arm/meta-arm-bsp/recipes-kernel/linux/linux-yocto-5.15/n1sdp/0002-n1sdp-pci_quirk-add-acs-override-for-PCI-devices.patch b/meta-arm/meta-arm-bsp/recipes-kernel/linux/linux-yocto-5.15/n1sdp/0002-n1sdp-pci_quirk-add-acs-override-for-PCI-devices.patch
new file mode 100644
index 0000000..a628409
--- /dev/null
+++ b/meta-arm/meta-arm-bsp/recipes-kernel/linux/linux-yocto-5.15/n1sdp/0002-n1sdp-pci_quirk-add-acs-override-for-PCI-devices.patch
@@ -0,0 +1,160 @@
+Upstream-Status: Inappropriate [will not be submitted as its a workaround to address hardware issue]
+Signed-off-by: Khasim Syed Mohammed <khasim.mohammed@arm.com>
+
+From e47ab593ee36b2480f8c2196722cded42749629a Mon Sep 17 00:00:00 2001
+From: Manoj Kumar <manoj.kumar3@arm.com>
+Date: Tue, 31 Aug 2021 16:15:38 +0000
+Subject: [PATCH 2/5] n1sdp: pci_quirk: add acs override for PCI devices
+
+Patch taken from:
+https://gitlab.com/Queuecumber/linux-acs-override/raw/master/workspaces/5.4/acso.patch
+
+Change-Id: Ib926bf50524ce9990fbaa2f2f8670fe84bd571f9
+Signed-off-by: Manoj Kumar <manoj.kumar3@arm.com>
+---
+ .../admin-guide/kernel-parameters.txt | 8 ++
+ drivers/pci/quirks.c | 102 ++++++++++++++++++
+ 2 files changed, 110 insertions(+)
+
+diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
+index 43dc35fe5bc0..a60e454854d7 100644
+--- a/Documentation/admin-guide/kernel-parameters.txt
++++ b/Documentation/admin-guide/kernel-parameters.txt
+@@ -3892,6 +3892,14 @@
+ nomsi [MSI] If the PCI_MSI kernel config parameter is
+ enabled, this kernel boot option can be used to
+ disable the use of MSI interrupts system-wide.
++ pcie_acs_override [PCIE] Override missing PCIe ACS support for
++ downstream
++ All downstream ports - full ACS capabilities
++ multfunction
++ All multifunction devices - multifunction ACS subset
++ id:nnnn:nnnn
++ Specfic device - full ACS capabilities
++ Specified as vid:did (vendor/device ID) in hex
+ noioapicquirk [APIC] Disable all boot interrupt quirks.
+ Safety option to keep boot IRQs enabled. This
+ should never be necessary.
+diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
+index 4537d1ea14fd..984f30d25a6d 100644
+--- a/drivers/pci/quirks.c
++++ b/drivers/pci/quirks.c
+@@ -3588,6 +3588,107 @@ static void quirk_no_bus_reset(struct pci_dev *dev)
+ dev->dev_flags |= PCI_DEV_FLAGS_NO_BUS_RESET;
+ }
+
++static bool acs_on_downstream;
++static bool acs_on_multifunction;
++
++#define NUM_ACS_IDS 16
++struct acs_on_id {
++ unsigned short vendor;
++ unsigned short device;
++};
++static struct acs_on_id acs_on_ids[NUM_ACS_IDS];
++static u8 max_acs_id;
++
++static __init int pcie_acs_override_setup(char *p)
++{
++ if (!p)
++ return -EINVAL;
++
++ while (*p) {
++ if (!strncmp(p, "downstream", 10))
++ acs_on_downstream = true;
++ if (!strncmp(p, "multifunction", 13))
++ acs_on_multifunction = true;
++ if (!strncmp(p, "id:", 3)) {
++ char opt[5];
++ int ret;
++ long val;
++
++ if (max_acs_id >= NUM_ACS_IDS - 1) {
++ pr_warn("Out of PCIe ACS override slots (%d)\n",
++ NUM_ACS_IDS);
++ goto next;
++ }
++
++ p += 3;
++ snprintf(opt, 5, "%s", p);
++ ret = kstrtol(opt, 16, &val);
++ if (ret) {
++ pr_warn("PCIe ACS ID parse error %d\n", ret);
++ goto next;
++ }
++ acs_on_ids[max_acs_id].vendor = val;
++
++ p += strcspn(p, ":");
++ if (*p != ':') {
++ pr_warn("PCIe ACS invalid ID\n");
++ goto next;
++ }
++
++ p++;
++ snprintf(opt, 5, "%s", p);
++ ret = kstrtol(opt, 16, &val);
++ if (ret) {
++ pr_warn("PCIe ACS ID parse error %d\n", ret);
++ goto next;
++ }
++ acs_on_ids[max_acs_id].device = val;
++ max_acs_id++;
++ }
++next:
++ p += strcspn(p, ",");
++ if (*p == ',')
++ p++;
++ }
++
++ if (acs_on_downstream || acs_on_multifunction || max_acs_id)
++ pr_warn("Warning: PCIe ACS overrides enabled; This may allow non-IOMMU protected peer-to-peer DMA\n");
++
++ return 0;
++}
++early_param("pcie_acs_override", pcie_acs_override_setup);
++
++static int pcie_acs_overrides(struct pci_dev *dev, u16 acs_flags)
++{
++ int i;
++
++ /* Never override ACS for legacy devices or devices with ACS caps */
++ if (!pci_is_pcie(dev) ||
++ pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ACS))
++ return -ENOTTY;
++
++ for (i = 0; i < max_acs_id; i++)
++ if (acs_on_ids[i].vendor == dev->vendor &&
++ acs_on_ids[i].device == dev->device)
++ return 1;
++
++ switch (pci_pcie_type(dev)) {
++ case PCI_EXP_TYPE_DOWNSTREAM:
++ case PCI_EXP_TYPE_ROOT_PORT:
++ if (acs_on_downstream)
++ return 1;
++ break;
++ case PCI_EXP_TYPE_ENDPOINT:
++ case PCI_EXP_TYPE_UPSTREAM:
++ case PCI_EXP_TYPE_LEG_END:
++ case PCI_EXP_TYPE_RC_END:
++ if (acs_on_multifunction && dev->multifunction)
++ return 1;
++ }
++
++ return -ENOTTY;
++}
++
+ /*
+ * Some NVIDIA GPU devices do not work with bus reset, SBR needs to be
+ * prevented for those affected devices.
+@@ -4949,6 +5050,7 @@ static const struct pci_dev_acs_enabled {
+ { PCI_VENDOR_ID_NXP, 0x8d9b, pci_quirk_nxp_rp_acs },
+ /* Zhaoxin Root/Downstream Ports */
+ { PCI_VENDOR_ID_ZHAOXIN, PCI_ANY_ID, pci_quirk_zhaoxin_pcie_ports_acs },
++ { PCI_ANY_ID, PCI_ANY_ID, pcie_acs_overrides },
+ { 0 }
+ };
+
+--
+2.17.1
+
diff --git a/meta-arm/meta-arm-bsp/recipes-kernel/linux/linux-yocto-5.15/n1sdp/0003-pcie-Add-quirk-for-the-Arm-Neoverse-N1SDP-platform.patch b/meta-arm/meta-arm-bsp/recipes-kernel/linux/linux-yocto-5.15/n1sdp/0003-pcie-Add-quirk-for-the-Arm-Neoverse-N1SDP-platform.patch
new file mode 100644
index 0000000..f0184a0
--- /dev/null
+++ b/meta-arm/meta-arm-bsp/recipes-kernel/linux/linux-yocto-5.15/n1sdp/0003-pcie-Add-quirk-for-the-Arm-Neoverse-N1SDP-platform.patch
@@ -0,0 +1,323 @@
+Upstream-Status: Inappropriate [will not be submitted as its a workaround to address hardware issue]
+Signed-off-by: Deepak Pandey <Deepak.Pandey@arm.com>
+
+From 63ee3a71eeb778a632f5683f3b9e404a70760e75 Mon Sep 17 00:00:00 2001
+From: Deepak Pandey <Deepak.Pandey@arm.com>
+Date: Fri, 31 May 2019 16:42:43 +0100
+Subject: [PATCH 3/5] pcie: Add quirk for the Arm Neoverse N1SDP platform
+
+The Arm N1SDP SoC suffers from some PCIe integration issues, most
+prominently config space accesses to not existing BDFs being answered
+with a bus abort, resulting in an SError.
+To mitigate this, the firmware scans the bus before boot (catching the
+SErrors) and creates a table with valid BDFs, which acts as a filter for
+Linux' config space accesses.
+
+Add code consulting the table as an ACPI PCIe quirk, also register the
+corresponding device tree based description of the host controller.
+Also fix the other two minor issues on the way, namely not being fully
+ECAM compliant and config space accesses being restricted to 32-bit
+accesses only.
+
+This allows the Arm Neoverse N1SDP board to boot Linux without crashing
+and to access *any* devices (there are no platform devices except UART).
+
+Signed-off-by: Deepak Pandey <Deepak.Pandey@arm.com>
+[Sudipto: extend to cover the CCIX root port as well]
+Signed-off-by: Sudipto Paul <sudipto.paul@arm.com>
+[Andre: fix coding style issues, rewrite some parts, add DT support]
+Signed-off-by: Andre Przywara <andre.przywara@arm.com>
+---
+ arch/arm64/configs/defconfig | 1 +
+ drivers/acpi/pci_mcfg.c | 7 +
+ drivers/pci/controller/Kconfig | 11 ++
+ drivers/pci/controller/Makefile | 1 +
+ drivers/pci/controller/pcie-n1sdp.c | 198 ++++++++++++++++++++++++++++
+ include/linux/pci-ecam.h | 2 +
+ 6 files changed, 220 insertions(+)
+ create mode 100644 drivers/pci/controller/pcie-n1sdp.c
+
+diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
+index 545197bc0501..57ae850ccdf0 100644
+--- a/arch/arm64/configs/defconfig
++++ b/arch/arm64/configs/defconfig
+@@ -212,6 +212,7 @@ CONFIG_NFC_NCI=m
+ CONFIG_NFC_S3FWRN5_I2C=m
+ CONFIG_PCI=y
+ CONFIG_PCIEPORTBUS=y
++CONFIG_PCI_QUIRKS=y
+ CONFIG_PCI_IOV=y
+ CONFIG_PCI_PASID=y
+ CONFIG_HOTPLUG_PCI=y
+diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
+index 53cab975f612..f31727da21ac 100644
+--- a/drivers/acpi/pci_mcfg.c
++++ b/drivers/acpi/pci_mcfg.c
+@@ -169,6 +169,13 @@ static struct mcfg_fixup mcfg_quirks[] = {
+ ALTRA_ECAM_QUIRK(1, 13),
+ ALTRA_ECAM_QUIRK(1, 14),
+ ALTRA_ECAM_QUIRK(1, 15),
++
++#define N1SDP_ECAM_MCFG(rev, seg, ops) \
++ {"ARMLTD", "ARMN1SDP", rev, seg, MCFG_BUS_ANY, ops }
++
++ /* N1SDP SoC with v1 PCIe controller */
++ N1SDP_ECAM_MCFG(0x20181101, 0, &pci_n1sdp_pcie_ecam_ops),
++ N1SDP_ECAM_MCFG(0x20181101, 1, &pci_n1sdp_ccix_ecam_ops),
+ };
+
+ static char mcfg_oem_id[ACPI_OEM_ID_SIZE];
+diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
+index 326f7d13024f..f9700d037c46 100644
+--- a/drivers/pci/controller/Kconfig
++++ b/drivers/pci/controller/Kconfig
+@@ -46,6 +46,17 @@ config PCI_IXP4XX
+ Say Y here if you want support for the PCI host controller found
+ in the Intel IXP4xx XScale-based network processor SoC.
+
++config PCIE_HOST_N1SDP_ECAM
++ bool "ARM N1SDP PCIe Controller"
++ depends on ARM64
++ depends on OF || (ACPI && PCI_QUIRKS)
++ select PCI_HOST_COMMON
++ default y if ARCH_VEXPRESS
++ help
++ Say Y here if you want PCIe support for the Arm N1SDP platform.
++ The controller is ECAM compliant, but needs a quirk to workaround
++ an integration issue.
++
+ config PCI_TEGRA
+ bool "NVIDIA Tegra PCIe controller"
+ depends on ARCH_TEGRA || COMPILE_TEST
+diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile
+index aaf30b3dcc14..2012ab2b7913 100644
+--- a/drivers/pci/controller/Makefile
++++ b/drivers/pci/controller/Makefile
+@@ -37,6 +37,7 @@ obj-$(CONFIG_VMD) += vmd.o
+ obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o
+ obj-$(CONFIG_PCI_LOONGSON) += pci-loongson.o
+ obj-$(CONFIG_PCIE_HISI_ERR) += pcie-hisi-error.o
++obj-$(CONFIG_PCIE_HOST_N1SDP_ECAM) += pcie-n1sdp.o
+ # pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW
+ obj-y += dwc/
+ obj-y += mobiveil/
+diff --git a/drivers/pci/controller/pcie-n1sdp.c b/drivers/pci/controller/pcie-n1sdp.c
+new file mode 100644
+index 000000000000..408699b9dcb1
+--- /dev/null
++++ b/drivers/pci/controller/pcie-n1sdp.c
+@@ -0,0 +1,198 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright (C) 2018/2019 ARM Ltd.
++ *
++ * This quirk is to mask the following issues:
++ * - PCIE SLVERR: config space accesses to invalid PCIe BDFs cause a bus
++ * error (signalled as an asynchronous SError)
++ * - MCFG BDF mapping: the root complex is mapped separately from the device
++ * config space
++ * - Non 32-bit accesses to config space are not supported.
++ *
++ * At boot time the SCP board firmware creates a discovery table with
++ * the root complex' base address and the valid BDF values, discovered while
++ * scanning the config space and catching the SErrors.
++ * Linux responds only to the EPs listed in this table, returning NULL
++ * for the rest.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/ioport.h>
++#include <linux/sizes.h>
++#include <linux/of_pci.h>
++#include <linux/of.h>
++#include <linux/pci-ecam.h>
++#include <linux/platform_device.h>
++#include <linux/module.h>
++
++#include "../pci.h"
++
++/* Platform specific values as hardcoded in the firmware. */
++#define AP_NS_SHARED_MEM_BASE 0x06000000
++#define MAX_SEGMENTS 2 /* Two PCIe root complexes. */
++#define BDF_TABLE_SIZE SZ_16K
++
++/*
++ * Shared memory layout as written by the SCP upon boot time:
++ * ----
++ * Discover data header --> RC base address
++ * \-> BDF Count
++ * Discover data --> BDF 0...n
++ * ----
++ */
++struct pcie_discovery_data {
++ u32 rc_base_addr;
++ u32 nr_bdfs;
++ u32 valid_bdfs[0];
++} *pcie_discovery_data[MAX_SEGMENTS];
++
++void __iomem *rc_remapped_addr[MAX_SEGMENTS];
++
++/*
++ * map_bus() is called before we do a config space access for a certain
++ * device. We use this to check whether this device is valid, avoiding
++ * config space accesses which would result in an SError otherwise.
++ */
++static void __iomem *pci_n1sdp_map_bus(struct pci_bus *bus, unsigned int devfn,
++ int where)
++{
++ struct pci_config_window *cfg = bus->sysdata;
++ unsigned int devfn_shift = cfg->ops->bus_shift - 8;
++ unsigned int busn = bus->number;
++ unsigned int segment = bus->domain_nr;
++ unsigned int bdf_addr;
++ unsigned int table_count, i;
++ struct pci_dev *dev;
++
++ if (segment >= MAX_SEGMENTS ||
++ busn < cfg->busr.start || busn > cfg->busr.end)
++ return NULL;
++
++ /* The PCIe root complex has a separate config space mapping. */
++ if (busn == 0 && devfn == 0)
++ return rc_remapped_addr[segment] + where;
++
++ dev = pci_get_domain_bus_and_slot(segment, busn, devfn);
++ if (dev && dev->is_virtfn)
++ return pci_ecam_map_bus(bus, devfn, where);
++
++ /* Accesses beyond the vendor ID always go to existing devices. */
++ if (where > 0)
++ return pci_ecam_map_bus(bus, devfn, where);
++
++ busn -= cfg->busr.start;
++ bdf_addr = (busn << cfg->ops->bus_shift) + (devfn << devfn_shift);
++ table_count = pcie_discovery_data[segment]->nr_bdfs;
++ for (i = 0; i < table_count; i++) {
++ if (bdf_addr == pcie_discovery_data[segment]->valid_bdfs[i])
++ return pci_ecam_map_bus(bus, devfn, where);
++ }
++
++ return NULL;
++}
++
++static int pci_n1sdp_init(struct pci_config_window *cfg, unsigned int segment)
++{
++ phys_addr_t table_base;
++ struct device *dev = cfg->parent;
++ struct pcie_discovery_data *shared_data;
++ size_t bdfs_size;
++
++ if (segment >= MAX_SEGMENTS)
++ return -ENODEV;
++
++ table_base = AP_NS_SHARED_MEM_BASE + segment * BDF_TABLE_SIZE;
++
++ if (!request_mem_region(table_base, BDF_TABLE_SIZE,
++ "PCIe valid BDFs")) {
++ dev_err(dev, "PCIe BDF shared region request failed\n");
++ return -ENOMEM;
++ }
++
++ shared_data = devm_ioremap(dev,
++ table_base, BDF_TABLE_SIZE);
++ if (!shared_data)
++ return -ENOMEM;
++
++ /* Copy the valid BDFs structure to allocated normal memory. */
++ bdfs_size = sizeof(struct pcie_discovery_data) +
++ sizeof(u32) * shared_data->nr_bdfs;
++ pcie_discovery_data[segment] = devm_kmalloc(dev, bdfs_size, GFP_KERNEL);
++ if (!pcie_discovery_data[segment])
++ return -ENOMEM;
++
++ memcpy_fromio(pcie_discovery_data[segment], shared_data, bdfs_size);
++
++ rc_remapped_addr[segment] = devm_ioremap(dev,
++ shared_data->rc_base_addr,
++ PCI_CFG_SPACE_EXP_SIZE);
++ if (!rc_remapped_addr[segment]) {
++ dev_err(dev, "Cannot remap root port base\n");
++ return -ENOMEM;
++ }
++
++ devm_iounmap(dev, shared_data);
++
++ return 0;
++}
++
++/* Called for ACPI segment 0, and for all segments when using DT. */
++static int pci_n1sdp_pcie_init(struct pci_config_window *cfg)
++{
++ struct platform_device *pdev = to_platform_device(cfg->parent);
++ int segment = 0;
++
++ if (pdev->dev.of_node)
++ segment = of_get_pci_domain_nr(pdev->dev.of_node);
++ if (segment < 0 || segment > MAX_SEGMENTS) {
++ dev_err(&pdev->dev, "N1SDP PCI controllers require linux,pci-domain property\n");
++ dev_err(&pdev->dev, "Or invalid segment number, must be smaller than %d\n",
++ MAX_SEGMENTS);
++ return -EINVAL;
++ }
++
++ return pci_n1sdp_init(cfg, segment);
++}
++
++/* Called for ACPI segment 1. */
++static int pci_n1sdp_ccix_init(struct pci_config_window *cfg)
++{
++ return pci_n1sdp_init(cfg, 1);
++}
++
++const struct pci_ecam_ops pci_n1sdp_pcie_ecam_ops = {
++ .bus_shift = 20,
++ .init = pci_n1sdp_pcie_init,
++ .pci_ops = {
++ .map_bus = pci_n1sdp_map_bus,
++ .read = pci_generic_config_read32,
++ .write = pci_generic_config_write32,
++ }
++};
++
++const struct pci_ecam_ops pci_n1sdp_ccix_ecam_ops = {
++ .bus_shift = 20,
++ .init = pci_n1sdp_ccix_init,
++ .pci_ops = {
++ .map_bus = pci_n1sdp_map_bus,
++ .read = pci_generic_config_read32,
++ .write = pci_generic_config_write32,
++ }
++};
++
++static const struct of_device_id n1sdp_pcie_of_match[] = {
++ { .compatible = "arm,n1sdp-pcie", .data = &pci_n1sdp_pcie_ecam_ops },
++ { },
++};
++MODULE_DEVICE_TABLE(of, n1sdp_pcie_of_match);
++
++static struct platform_driver n1sdp_pcie_driver = {
++ .driver = {
++ .name = KBUILD_MODNAME,
++ .of_match_table = n1sdp_pcie_of_match,
++ .suppress_bind_attrs = true,
++ },
++ .probe = pci_host_common_probe,
++};
++builtin_platform_driver(n1sdp_pcie_driver);
+diff --git a/include/linux/pci-ecam.h b/include/linux/pci-ecam.h
+index adea5a4771cf..e6bbc037cef8 100644
+--- a/include/linux/pci-ecam.h
++++ b/include/linux/pci-ecam.h
+@@ -87,6 +87,8 @@ extern const struct pci_ecam_ops xgene_v1_pcie_ecam_ops; /* APM X-Gene PCIe v1 *
+ extern const struct pci_ecam_ops xgene_v2_pcie_ecam_ops; /* APM X-Gene PCIe v2.x */
+ extern const struct pci_ecam_ops al_pcie_ops; /* Amazon Annapurna Labs PCIe */
+ extern const struct pci_ecam_ops tegra194_pcie_ops; /* Tegra194 PCIe */
++extern const struct pci_ecam_ops pci_n1sdp_pcie_ecam_ops; /* Arm N1SDP PCIe */
++extern const struct pci_ecam_ops pci_n1sdp_ccix_ecam_ops; /* Arm N1SDP PCIe */
+ #endif
+
+ #if IS_ENABLED(CONFIG_PCI_HOST_COMMON)
+--
+2.17.1
+
diff --git a/meta-arm/meta-arm-bsp/recipes-kernel/linux/linux-yocto-5.15/n1sdp/0004-n1sdp-pcie-add-quirk-support-enabling-remote-chip-PC.patch b/meta-arm/meta-arm-bsp/recipes-kernel/linux/linux-yocto-5.15/n1sdp/0004-n1sdp-pcie-add-quirk-support-enabling-remote-chip-PC.patch
new file mode 100644
index 0000000..c15b464
--- /dev/null
+++ b/meta-arm/meta-arm-bsp/recipes-kernel/linux/linux-yocto-5.15/n1sdp/0004-n1sdp-pcie-add-quirk-support-enabling-remote-chip-PC.patch
@@ -0,0 +1,137 @@
+Upstream-Status: Inappropriate [will not be submitted as its an hack required to fix the hardware issue]
+Signed-off-by: Sayanta Pattanayak <sayanta.pattanayak@arm.com>
+
+From 4d69e38213bf52a48f2f0239da8c7b76501428b2 Mon Sep 17 00:00:00 2001
+From: Sayanta Pattanayak <sayanta.pattanayak@arm.com>
+Date: Wed, 9 Feb 2022 20:37:43 +0530
+Subject: [PATCH 4/5] n1sdp: pcie: add quirk support enabling remote chip PCIe
+
+Base address mapping for remote chip Root PCIe ECAM space.
+
+When two N1SDP boards are coupled via the CCIX connection, the PCI host
+complex of the remote board appears as PCIe segment 2 on the primary board.
+The resources of the secondary board, including the host complex, are
+mapped at offset 0x40000000000 into the address space of the primary
+board, so take that into account when accessing the remote PCIe segment.
+
+Change-Id: I0e8d1eb119aef6444b9df854a39b24441c12195a
+Signed-off-by: Sayanta Pattanayak <sayanta.pattanayak@arm.com>
+Signed-off-by: Khasim Syed Mohammed <khasim.mohammed@arm.com>
+Signed-off-by: Andre Przywara <andre.przywara@arm.com>
+Signed-off-by: sahil <sahil@arm.com>
+---
+ drivers/acpi/pci_mcfg.c | 1 +
+ drivers/pci/controller/pcie-n1sdp.c | 32 +++++++++++++++++++++++++----
+ include/linux/pci-ecam.h | 1 +
+ 3 files changed, 30 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
+index f31727da21ac..58f59b5fffa2 100644
+--- a/drivers/acpi/pci_mcfg.c
++++ b/drivers/acpi/pci_mcfg.c
+@@ -176,6 +176,7 @@ static struct mcfg_fixup mcfg_quirks[] = {
+ /* N1SDP SoC with v1 PCIe controller */
+ N1SDP_ECAM_MCFG(0x20181101, 0, &pci_n1sdp_pcie_ecam_ops),
+ N1SDP_ECAM_MCFG(0x20181101, 1, &pci_n1sdp_ccix_ecam_ops),
++ N1SDP_ECAM_MCFG(0x20181101, 2, &pci_n1sdp_remote_pcie_ecam_ops),
+ };
+
+ static char mcfg_oem_id[ACPI_OEM_ID_SIZE];
+diff --git a/drivers/pci/controller/pcie-n1sdp.c b/drivers/pci/controller/pcie-n1sdp.c
+index 408699b9dcb1..a03665dd056a 100644
+--- a/drivers/pci/controller/pcie-n1sdp.c
++++ b/drivers/pci/controller/pcie-n1sdp.c
+@@ -30,8 +30,10 @@
+
+ /* Platform specific values as hardcoded in the firmware. */
+ #define AP_NS_SHARED_MEM_BASE 0x06000000
+-#define MAX_SEGMENTS 2 /* Two PCIe root complexes. */
++/* Two PCIe root complexes in One Chip + One PCIe RC in Remote Chip */
++#define MAX_SEGMENTS 3
+ #define BDF_TABLE_SIZE SZ_16K
++#define REMOTE_CHIP_ADDR_OFFSET 0x40000000000
+
+ /*
+ * Shared memory layout as written by the SCP upon boot time:
+@@ -97,12 +99,17 @@ static int pci_n1sdp_init(struct pci_config_window *cfg, unsigned int segment)
+ phys_addr_t table_base;
+ struct device *dev = cfg->parent;
+ struct pcie_discovery_data *shared_data;
+- size_t bdfs_size;
++ size_t bdfs_size, rc_base_addr = 0;
+
+ if (segment >= MAX_SEGMENTS)
+ return -ENODEV;
+
+- table_base = AP_NS_SHARED_MEM_BASE + segment * BDF_TABLE_SIZE;
++ if (segment > 1) {
++ rc_base_addr = REMOTE_CHIP_ADDR_OFFSET;
++ table_base = AP_NS_SHARED_MEM_BASE + REMOTE_CHIP_ADDR_OFFSET;
++ } else {
++ table_base = AP_NS_SHARED_MEM_BASE + segment * BDF_TABLE_SIZE;
++ }
+
+ if (!request_mem_region(table_base, BDF_TABLE_SIZE,
+ "PCIe valid BDFs")) {
+@@ -114,6 +121,7 @@ static int pci_n1sdp_init(struct pci_config_window *cfg, unsigned int segment)
+ table_base, BDF_TABLE_SIZE);
+ if (!shared_data)
+ return -ENOMEM;
++ rc_base_addr += shared_data->rc_base_addr;
+
+ /* Copy the valid BDFs structure to allocated normal memory. */
+ bdfs_size = sizeof(struct pcie_discovery_data) +
+@@ -125,7 +133,7 @@ static int pci_n1sdp_init(struct pci_config_window *cfg, unsigned int segment)
+ memcpy_fromio(pcie_discovery_data[segment], shared_data, bdfs_size);
+
+ rc_remapped_addr[segment] = devm_ioremap(dev,
+- shared_data->rc_base_addr,
++ rc_base_addr,
+ PCI_CFG_SPACE_EXP_SIZE);
+ if (!rc_remapped_addr[segment]) {
+ dev_err(dev, "Cannot remap root port base\n");
+@@ -161,6 +169,12 @@ static int pci_n1sdp_ccix_init(struct pci_config_window *cfg)
+ return pci_n1sdp_init(cfg, 1);
+ }
+
++/* Called for ACPI segment 2. */
++static int pci_n1sdp_remote_pcie_init(struct pci_config_window *cfg)
++{
++ return pci_n1sdp_init(cfg, 2);
++}
++
+ const struct pci_ecam_ops pci_n1sdp_pcie_ecam_ops = {
+ .bus_shift = 20,
+ .init = pci_n1sdp_pcie_init,
+@@ -181,6 +195,16 @@ const struct pci_ecam_ops pci_n1sdp_ccix_ecam_ops = {
+ }
+ };
+
++const struct pci_ecam_ops pci_n1sdp_remote_pcie_ecam_ops = {
++ .bus_shift = 20,
++ .init = pci_n1sdp_remote_pcie_init,
++ .pci_ops = {
++ .map_bus = pci_n1sdp_map_bus,
++ .read = pci_generic_config_read32,
++ .write = pci_generic_config_write32,
++ }
++};
++
+ static const struct of_device_id n1sdp_pcie_of_match[] = {
+ { .compatible = "arm,n1sdp-pcie", .data = &pci_n1sdp_pcie_ecam_ops },
+ { },
+diff --git a/include/linux/pci-ecam.h b/include/linux/pci-ecam.h
+index e6bbc037cef8..7bd8c1d702ee 100644
+--- a/include/linux/pci-ecam.h
++++ b/include/linux/pci-ecam.h
+@@ -89,6 +89,7 @@ extern const struct pci_ecam_ops al_pcie_ops; /* Amazon Annapurna Labs PCIe */
+ extern const struct pci_ecam_ops tegra194_pcie_ops; /* Tegra194 PCIe */
+ extern const struct pci_ecam_ops pci_n1sdp_pcie_ecam_ops; /* Arm N1SDP PCIe */
+ extern const struct pci_ecam_ops pci_n1sdp_ccix_ecam_ops; /* Arm N1SDP PCIe */
++extern const struct pci_ecam_ops pci_n1sdp_remote_pcie_ecam_ops; /* Arm N1SDP PCIe */
+ #endif
+
+ #if IS_ENABLED(CONFIG_PCI_HOST_COMMON)
+--
+2.17.1
+
diff --git a/meta-arm/meta-arm-bsp/recipes-kernel/linux/linux-yocto-5.15/n1sdp/0005-arm64-kpti-Whitelist-early-Arm-Neoverse-N1-revisions.patch b/meta-arm/meta-arm-bsp/recipes-kernel/linux/linux-yocto-5.15/n1sdp/0005-arm64-kpti-Whitelist-early-Arm-Neoverse-N1-revisions.patch
new file mode 100644
index 0000000..0404086
--- /dev/null
+++ b/meta-arm/meta-arm-bsp/recipes-kernel/linux/linux-yocto-5.15/n1sdp/0005-arm64-kpti-Whitelist-early-Arm-Neoverse-N1-revisions.patch
@@ -0,0 +1,34 @@
+Upstream-Status: Inappropriate
+Signed-off-by: Andre Przywara <andre.przywara@arm.com>
+
+From d20f5afffadcdbaca7032f547cce80720d8a414a Mon Sep 17 00:00:00 2001
+From: Andre Przywara <andre.przywara@arm.com>
+Date: Fri, 17 May 2019 17:39:27 +0100
+Subject: [PATCH 5/5] arm64: kpti: Whitelist early Arm Neoverse N1 revisions
+
+Early revisions (r1p0) of the Neoverse N1 core did not feature the
+CSV3 field in ID_AA64PFR0_EL1 to advertise they are not affected by
+the Spectre variant 3 (aka Meltdown) vulnerability.
+
+Add this particular revision to the whitelist to avoid enabling KPTI.
+
+Signed-off-by: Andre Przywara <andre.przywara@arm.com>
+---
+ arch/arm64/kernel/cpufeature.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
+index 6ec7036ef7e1..ceba98773608 100644
+--- a/arch/arm64/kernel/cpufeature.c
++++ b/arch/arm64/kernel/cpufeature.c
+@@ -1509,6 +1509,7 @@ static bool unmap_kernel_at_el0(const struct arm64_cpu_capabilities *entry,
+ MIDR_ALL_VERSIONS(MIDR_QCOM_KRYO_2XX_SILVER),
+ MIDR_ALL_VERSIONS(MIDR_QCOM_KRYO_3XX_SILVER),
+ MIDR_ALL_VERSIONS(MIDR_QCOM_KRYO_4XX_SILVER),
++ MIDR_REV(MIDR_NEOVERSE_N1, 1, 0), /* missing CSV3 */
+ { /* sentinel */ }
+ };
+ char const *str = "kpti command line option";
+--
+2.17.1
+
diff --git a/meta-arm/meta-arm-bsp/recipes-kernel/linux/linux-yocto-5.15/n1sdp/enable-realtek-R8169.cfg b/meta-arm/meta-arm-bsp/recipes-kernel/linux/linux-yocto-5.15/n1sdp/enable-realtek-R8169.cfg
new file mode 100644
index 0000000..7a57474
--- /dev/null
+++ b/meta-arm/meta-arm-bsp/recipes-kernel/linux/linux-yocto-5.15/n1sdp/enable-realtek-R8169.cfg
@@ -0,0 +1,3 @@
+# Enable Realtek Gigabit Ethernet adapter
+CONFIG_REALTEK_PHY=y
+CONFIG_R8169=y
diff --git a/meta-arm/meta-arm-bsp/recipes-kernel/linux/linux-yocto-5.15/n1sdp/enable-usb_conn_gpio.cfg b/meta-arm/meta-arm-bsp/recipes-kernel/linux/linux-yocto-5.15/n1sdp/enable-usb_conn_gpio.cfg
new file mode 100644
index 0000000..128c902
--- /dev/null
+++ b/meta-arm/meta-arm-bsp/recipes-kernel/linux/linux-yocto-5.15/n1sdp/enable-usb_conn_gpio.cfg
@@ -0,0 +1,2 @@
+# PHY_TEGRA_XUSB sets this to y, but its set as m in defconfig
+CONFIG_USB_CONN_GPIO=y
diff --git a/meta-arm/meta-arm-bsp/recipes-kernel/linux/linux-yocto-5.15/n1sdp/usb_xhci_pci_renesas.cfg b/meta-arm/meta-arm-bsp/recipes-kernel/linux/linux-yocto-5.15/n1sdp/usb_xhci_pci_renesas.cfg
new file mode 100644
index 0000000..c06507c
--- /dev/null
+++ b/meta-arm/meta-arm-bsp/recipes-kernel/linux/linux-yocto-5.15/n1sdp/usb_xhci_pci_renesas.cfg
@@ -0,0 +1,2 @@
+# CONFIG_USB_XHCI_PCI is not set
+# CONFIG_USB_XHCI_PCI_RENESAS is not set