diff --git a/bitbake/doc/bitbake-user-manual/bitbake-user-manual-ref-variables.xml b/bitbake/doc/bitbake-user-manual/bitbake-user-manual-ref-variables.xml
new file mode 100644
index 0000000..05e1b95
--- /dev/null
+++ b/bitbake/doc/bitbake-user-manual/bitbake-user-manual-ref-variables.xml
@@ -0,0 +1,2262 @@
+<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
+"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"
+[<!ENTITY % poky SYSTEM "../poky.ent"> %poky; ] >
+
+<!-- Dummy chapter -->
+<chapter id='ref-variables-glos'>
+
+<title>Variables Glossary</title>
+
+<para>
+    This chapter lists common variables used by BitBake and gives an overview
+    of their function and contents.
+</para>
+
+<note>
+    Following are some points regarding the variables listed in this glossary:
+    <itemizedlist>
+        <listitem><para>The variables listed in this glossary
+            are specific to BitBake.
+            Consequently, the descriptions are limited to that context.
+            </para></listitem>
+        <listitem><para>Also, variables exist in other systems that use BitBake
+            (e.g. The Yocto Project and OpenEmbedded) that have names identical
+            to those found in this glossary.
+            For such cases, the variables in those systems extend the
+            functionality of the variable as it is described here in
+            this glossary.
+            </para></listitem>
+        <listitem><para>Finally, there are variables mentioned in this
+            glossary that do not appear in the BitBake glossary.
+            These other variables are variables used in systems that use
+            BitBake.
+            </para></listitem>
+    </itemizedlist>
+</note>
+
+<glossary id='ref-variables-glossary'>
+
+    <para>
+       <link linkend='var-ASSUME_PROVIDED'>A</link>
+       <link linkend='var-B'>B</link>
+       <link linkend='var-CACHE'>C</link>
+       <link linkend='var-DEFAULT_PREFERENCE'>D</link>
+       <link linkend='var-EXCLUDE_FROM_WORLD'>E</link>
+       <link linkend='var-FAKEROOT'>F</link>
+       <link linkend='var-GITDIR'>G</link>
+       <link linkend='var-HGDIR'>H</link>
+<!--       <link linkend='var-ICECC_DISABLED'>I</link> -->
+<!--               <link linkend='var-glossary-j'>J</link> -->
+<!--       <link linkend='var-KARCH'>K</link> -->
+       <link linkend='var-LAYERDEPENDS'>L</link>
+       <link linkend='var-MIRRORS'>M</link>
+<!--               <link linkend='var-glossary-n'>N</link> -->
+       <link linkend='var-OVERRIDES'>O</link>
+       <link linkend='var-PACKAGES'>P</link>
+<!--       <link linkend='var-QMAKE_PROFILES'>Q</link> -->
+       <link linkend='var-RDEPENDS'>R</link>
+       <link linkend='var-SECTION'>S</link>
+       <link linkend='var-T'>T</link>
+<!--       <link linkend='var-UBOOT_CONFIG'>U</link> -->
+<!--               <link linkend='var-glossary-v'>V</link> -->
+<!--       <link linkend='var-WARN_QA'>W</link> -->
+<!--               <link linkend='var-glossary-x'>X</link> -->
+<!--               <link linkend='var-glossary-y'>Y</link> -->
+<!--               <link linkend='var-glossary-z'>Z</link>-->
+    </para>
+
+    <glossdiv id='var-glossary-a'><title>A</title>
+
+        <glossentry id='var-ASSUME_PROVIDED'><glossterm>ASSUME_PROVIDED</glossterm>
+            <glossdef>
+                <para>
+                    Lists recipe names
+                    (<link linkend='var-PN'><filename>PN</filename></link>
+                    values) BitBake does not attempt to build.
+                    Instead, BitBake assumes these recipes have already been
+                    built.
+                </para>
+
+                <para>
+                    In OpenEmbedded Core, <filename>ASSUME_PROVIDED</filename>
+                    mostly specifies native tools that should not be built.
+                    An example is <filename>git-native</filename>, which
+                    when specified allows for the Git binary from the host to
+                    be used rather than building
+                    <filename>git-native</filename>.
+                </para>
+            </glossdef>
+        </glossentry>
+
+    </glossdiv>
+
+
+    <glossdiv id='var-glossary-b'><title>B</title>
+
+        <glossentry id='var-B'><glossterm>B</glossterm>
+            <glossdef>
+                <para>
+                    The directory in which BitBake executes functions
+                    during a recipe's build process.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BB_ALLOWED_NETWORKS'><glossterm>BB_ALLOWED_NETWORKS</glossterm>
+            <glossdef>
+                <para>
+                    Specifies a space-delimited list of hosts that the fetcher
+                    is allowed to use to obtain the required source code.
+                    Following are considerations surrounding this variable:
+                    <itemizedlist>
+                        <listitem><para>
+                            This host list is only used if
+                            <link linkend='var-BB_NO_NETWORK'><filename>BB_NO_NETWORK</filename></link>
+                            is either not set or set to "0".
+                            </para></listitem>
+                        <listitem><para>
+                            Limited support for wildcard matching against the
+                            beginning of host names exists.
+                            For example, the following setting matches
+                            <filename>git.gnu.org</filename>,
+                            <filename>ftp.gnu.org</filename>, and
+                            <filename>foo.git.gnu.org</filename>.
+                            <literallayout class='monospaced'>
+     BB_ALLOWED_NETWORKS = "*.gnu.org"
+                            </literallayout>
+                            </para></listitem>
+                        <listitem><para>
+                            Mirrors not in the host list are skipped and
+                            logged in debug.
+                            </para></listitem>
+                        <listitem><para>
+                            Attempts to access networks not in the host list
+                            cause a failure.
+                            </para></listitem>
+                    </itemizedlist>
+                    Using <filename>BB_ALLOWED_NETWORKS</filename> in
+                    conjunction with
+                    <link linkend='var-PREMIRRORS'><filename>PREMIRRORS</filename></link>
+                    is very useful.
+                    Adding the host you want to use to
+                    <filename>PREMIRRORS</filename> results in the source code
+                    being fetched from an allowed location and avoids raising
+                    an error when a host that is not allowed is in a
+                    <link linkend='var-SRC_URI'><filename>SRC_URI</filename></link>
+                    statement.
+                    This is because the fetcher does not attempt to use the
+                    host listed in <filename>SRC_URI</filename> after a
+                    successful fetch from the
+                    <filename>PREMIRRORS</filename> occurs.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BB_CONSOLELOG'><glossterm>BB_CONSOLELOG</glossterm>
+            <glossdef>
+                <para>
+                    Specifies the path to a log file into which BitBake's user
+                    interface writes output during the build.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BB_CURRENTTASK'><glossterm>BB_CURRENTTASK</glossterm>
+            <glossdef>
+                <para>
+                    Contains the name of the currently running task.
+                    The name does not include the
+                    <filename>do_</filename> prefix.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BB_DANGLINGAPPENDS_WARNONLY'><glossterm>BB_DANGLINGAPPENDS_WARNONLY</glossterm>
+            <glossdef>
+                <para>
+                    Defines how BitBake handles situations where an append
+                    file (<filename>.bbappend</filename>) has no
+                    corresponding recipe file (<filename>.bb</filename>).
+                    This condition often occurs when layers get out of sync
+                    (e.g. <filename>oe-core</filename> bumps a
+                    recipe version and the old recipe no longer exists and the
+                    other layer has not been updated to the new version
+                    of the recipe yet).
+                </para>
+
+                <para>
+                    The default fatal behavior is safest because it is
+                    the sane reaction given something is out of sync.
+                    It is important to realize when your changes are no longer
+                    being applied.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BB_DEFAULT_TASK'><glossterm>BB_DEFAULT_TASK</glossterm>
+            <glossdef>
+                <para>
+                    The default task to use when none is specified (e.g.
+                    with the <filename>-c</filename> command line option).
+                    The task name specified should not include the
+                    <filename>do_</filename> prefix.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BB_DISKMON_DIRS'><glossterm>BB_DISKMON_DIRS</glossterm>
+            <glossdef>
+                <para>
+                    Monitors disk space and available inodes during the build
+                    and allows you to control the build based on these
+                    parameters.
+                </para>
+
+                <para>
+                    Disk space monitoring is disabled by default.
+                    When setting this variable, use the following form:
+                    <literallayout class='monospaced'>
+     BB_DISKMON_DIRS = "&lt;action&gt;,&lt;dir&gt;,&lt;threshold&gt; [...]"
+
+     where:
+
+        &lt;action&gt; is:
+           ABORT:     Immediately abort the build when
+                      a threshold is broken.
+           STOPTASKS: Stop the build after the currently
+                      executing tasks have finished when
+                      a threshold is broken.
+           WARN:      Issue a warning but continue the
+                      build when a threshold is broken.
+                      Subsequent warnings are issued as
+                      defined by the
+                      <link linkend='var-BB_DISKMON_WARNINTERVAL'>BB_DISKMON_WARNINTERVAL</link> variable,
+                      which must be defined.
+
+        &lt;dir&gt; is:
+           Any directory you choose. You can specify one or
+           more directories to monitor by separating the
+           groupings with a space.  If two directories are
+           on the same device, only the first directory
+           is monitored.
+
+        &lt;threshold&gt; is:
+           Either the minimum available disk space,
+           the minimum number of free inodes, or
+           both.  You must specify at least one.  To
+           omit one or the other, simply omit the value.
+           Specify the threshold using G, M, K for Gbytes,
+           Mbytes, and Kbytes, respectively. If you do
+           not specify G, M, or K, Kbytes is assumed by
+           default.  Do not use GB, MB, or KB.
+                    </literallayout>
+                </para>
+
+                <para>
+                    Here are some examples:
+                    <literallayout class='monospaced'>
+     BB_DISKMON_DIRS = "ABORT,${TMPDIR},1G,100K WARN,${SSTATE_DIR},1G,100K"
+     BB_DISKMON_DIRS = "STOPTASKS,${TMPDIR},1G"
+     BB_DISKMON_DIRS = "ABORT,${TMPDIR},,100K"
+                    </literallayout>
+                    The first example works only if you also set
+                    the <link linkend='var-BB_DISKMON_WARNINTERVAL'><filename>BB_DISKMON_WARNINTERVAL</filename></link> variable.
+                    This example causes the build system to immediately
+                    abort when either the disk space in <filename>${TMPDIR}</filename> drops
+                    below 1 Gbyte or the available free inodes drops below
+                    100 Kbytes.
+                    Because two directories are provided with the variable, the
+                    build system also issues a
+                    warning when the disk space in the
+                    <filename>${SSTATE_DIR}</filename> directory drops
+                    below 1 Gbyte or the number of free inodes drops
+                    below 100 Kbytes.
+                    Subsequent warnings are issued during intervals as
+                    defined by the <filename>BB_DISKMON_WARNINTERVAL</filename>
+                    variable.
+                </para>
+
+                <para>
+                    The second example stops the build after all currently
+                    executing tasks complete when the minimum disk space
+                    in the <filename>${TMPDIR}</filename>
+                    directory drops below 1 Gbyte.
+                    No disk monitoring occurs for the free inodes in this case.
+                </para>
+
+                <para>
+                    The final example immediately aborts the build when the
+                    number of free inodes in the <filename>${TMPDIR}</filename> directory
+                    drops below 100 Kbytes.
+                    No disk space monitoring for the directory itself occurs
+                    in this case.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BB_DISKMON_WARNINTERVAL'><glossterm>BB_DISKMON_WARNINTERVAL</glossterm>
+            <glossdef>
+                <para>
+                    Defines the disk space and free inode warning intervals.
+                </para>
+
+                <para>
+                    If you are going to use the
+                    <filename>BB_DISKMON_WARNINTERVAL</filename> variable, you must
+                    also use the
+                    <link linkend='var-BB_DISKMON_DIRS'><filename>BB_DISKMON_DIRS</filename></link> variable
+                    and define its action as "WARN".
+                    During the build, subsequent warnings are issued each time
+                    disk space or number of free inodes further reduces by
+                    the respective interval.
+                </para>
+
+                <para>
+                    If you do not provide a <filename>BB_DISKMON_WARNINTERVAL</filename>
+                    variable and you do use <filename>BB_DISKMON_DIRS</filename> with
+                    the "WARN" action, the disk monitoring interval defaults to
+                    the following:
+                    <literallayout class='monospaced'>
+     BB_DISKMON_WARNINTERVAL = "50M,5K"
+                    </literallayout>
+                </para>
+
+                <para>
+                    When specifying the variable in your configuration file,
+                    use the following form:
+                    <literallayout class='monospaced'>
+     BB_DISKMON_WARNINTERVAL = "&lt;disk_space_interval&gt;,&lt;disk_inode_interval&gt;"
+
+     where:
+
+        &lt;disk_space_interval&gt; is:
+           An interval of memory expressed in either
+           G, M, or K for Gbytes, Mbytes, or Kbytes,
+           respectively. You cannot use GB, MB, or KB.
+
+        &lt;disk_inode_interval&gt; is:
+           An interval of free inodes expressed in either
+           G, M, or K for Gbytes, Mbytes, or Kbytes,
+           respectively. You cannot use GB, MB, or KB.
+                    </literallayout>
+                </para>
+
+                <para>
+                    Here is an example:
+                    <literallayout class='monospaced'>
+     BB_DISKMON_DIRS = "WARN,${SSTATE_DIR},1G,100K"
+     BB_DISKMON_WARNINTERVAL = "50M,5K"
+                    </literallayout>
+                    These variables cause BitBake to
+                    issue subsequent warnings each time the available
+                    disk space further reduces by 50 Mbytes or the number
+                    of free inodes further reduces by 5 Kbytes in the
+                    <filename>${SSTATE_DIR}</filename> directory.
+                    Subsequent warnings based on the interval occur each time
+                    a respective interval is reached beyond the initial warning
+                    (i.e. 1 Gbytes and 100 Kbytes).
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BB_ENV_WHITELIST'><glossterm>BB_ENV_WHITELIST</glossterm>
+            <glossdef>
+                <para>
+                    Specifies the internal whitelist of variables to allow
+                    through from the external environment into BitBake's
+                    datastore.
+                    If the value of this variable is not specified
+                    (which is the default), the following list is used:
+                    <link linkend='var-BBPATH'><filename>BBPATH</filename></link>,
+                    <link linkend='var-BB_PRESERVE_ENV'><filename>BB_PRESERVE_ENV</filename></link>,
+                    <link linkend='var-BB_ENV_WHITELIST'><filename>BB_ENV_WHITELIST</filename></link>,
+                    and
+                    <link linkend='var-BB_ENV_EXTRAWHITE'><filename>BB_ENV_EXTRAWHITE</filename></link>.
+                    <note>
+                        You must set this variable in the external environment
+                        in order for it to work.
+                    </note>
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BB_ENV_EXTRAWHITE'><glossterm>BB_ENV_EXTRAWHITE</glossterm>
+            <glossdef>
+                <para>
+                    Specifies an additional set of variables to allow through
+                    (whitelist) from the external environment into BitBake's
+                    datastore.
+                    This list of variables are on top of the internal list
+                    set in
+                    <link linkend='var-BB_ENV_WHITELIST'><filename>BB_ENV_WHITELIST</filename></link>.
+                    <note>
+                        You must set this variable in the external
+                        environment in order for it to work.
+                    </note>
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BB_FETCH_PREMIRRORONLY'><glossterm>BB_FETCH_PREMIRRORONLY</glossterm>
+            <glossdef>
+                <para>
+                    When set to "1", causes BitBake's fetcher module to only
+                    search
+                    <link linkend='var-PREMIRRORS'><filename>PREMIRRORS</filename></link>
+                    for files.
+                    BitBake will not search the main
+                    <link linkend='var-SRC_URI'><filename>SRC_URI</filename></link>
+                    or
+                    <link linkend='var-MIRRORS'><filename>MIRRORS</filename></link>.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BB_FILENAME'><glossterm>BB_FILENAME</glossterm>
+            <glossdef>
+                <para>
+                    Contains the filename of the recipe that owns the currently
+                    running task.
+                    For example, if the <filename>do_fetch</filename> task that
+                    resides in the <filename>my-recipe.bb</filename> is
+                    executing, the <filename>BB_FILENAME</filename> variable
+                    contains "/foo/path/my-recipe.bb".
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BB_GENERATE_MIRROR_TARBALLS'><glossterm>BB_GENERATE_MIRROR_TARBALLS</glossterm>
+            <glossdef>
+                <para>
+                    Causes tarballs of the Git repositories, including the
+                    Git metadata, to be placed in the
+                    <link linkend='var-DL_DIR'><filename>DL_DIR</filename></link>
+                    directory.
+                    Anyone wishing to create a source mirror would want to
+                    enable this variable.
+                </para>
+
+                <para>
+                    For performance reasons, creating and placing tarballs of
+                    the Git repositories is not the default action by BitBake.
+                    <literallayout class='monospaced'>
+     BB_GENERATE_MIRROR_TARBALLS = "1"
+                    </literallayout>
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BB_HASHCONFIG_WHITELIST'><glossterm>BB_HASHCONFIG_WHITELIST</glossterm>
+            <glossdef>
+                <para>
+                    Lists variables that are excluded from base configuration
+                    checksum, which is used to determine if the cache can
+                    be reused.
+                </para>
+
+                <para>
+                    One of the ways BitBake determines whether to re-parse the
+                    main metadata is through checksums of the variables in the
+                    datastore of the base configuration data.
+                    There are variables that you typically want to exclude when
+                    checking whether or not to re-parse and thus rebuild the
+                    cache.
+                    As an example, you would usually exclude
+                    <filename>TIME</filename> and <filename>DATE</filename>
+                    because these variables are always changing.
+                    If you did not exclude them, BitBake would never reuse the
+                    cache.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BB_HASHBASE_WHITELIST'><glossterm>BB_HASHBASE_WHITELIST</glossterm>
+            <glossdef>
+                <para>
+                    Lists variables that are excluded from checksum and
+                    dependency data.
+                    Variables that are excluded can therefore change without
+                    affecting the checksum mechanism.
+                    A common example would be the variable for the path of
+                    the build.
+                    BitBake's output should not (and usually does not) depend
+                    on the directory in which it was built.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BB_HASHCHECK_FUNCTION'><glossterm>BB_HASHCHECK_FUNCTION</glossterm>
+            <glossdef>
+                <para>
+                    Specifies the name of the function to call during the
+                    "setscene" part of the task's execution in order to
+                    validate the list of task hashes.
+                    The function returns the list of setscene tasks that should
+                    be executed.
+                </para>
+
+                <para>
+                    At this point in the execution of the code, the objective
+                    is to quickly verify if a given setscene function is likely
+                    to work or not.
+                    It's easier to check the list of setscene functions in
+                    one pass than to call many individual tasks.
+                    The returned list need not be completely accurate.
+                    A given setscene task can still later fail.
+                    However, the more accurate the data returned, the more
+                    efficient the build will be.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BB_INVALIDCONF'><glossterm>BB_INVALIDCONF</glossterm>
+            <glossdef>
+                <para>
+                    Used in combination with the
+                    <filename>ConfigParsed</filename> event to trigger
+                    re-parsing the base metadata (i.e. all the
+                    recipes).
+                    The <filename>ConfigParsed</filename> event can set the
+                    variable to trigger the re-parse.
+                    You must be careful to avoid recursive loops with this
+                    functionality.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BB_LOGFMT'><glossterm>BB_LOGFMT</glossterm>
+            <glossdef>
+                <para>
+                    Specifies the name of the log files saved into
+                    <filename>${</filename><link linkend='var-T'><filename>T</filename></link><filename>}</filename>.
+                    By default, the <filename>BB_LOGFMT</filename> variable
+                    is undefined and the log file names get created using the
+                    following form:
+                    <literallayout class='monospaced'>
+     log.{task}.{pid}
+                    </literallayout>
+                    If you want to force log files to take a specific name,
+                    you can set this variable in a configuration file.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BB_NICE_LEVEL'><glossterm>BB_NICE_LEVEL</glossterm>
+            <glossdef>
+                <para>
+                    Allows BitBake to run at a specific priority
+                    (i.e. nice level).
+                    System permissions usually mean that BitBake can reduce its
+                    priority but not raise it again.
+                    See
+                    <link linkend='var-BB_TASK_NICE_LEVEL'><filename>BB_TASK_NICE_LEVEL</filename></link>
+                    for additional information.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BB_NO_NETWORK'><glossterm>BB_NO_NETWORK</glossterm>
+            <glossdef>
+                <para>
+                    Disables network access in the BitBake fetcher modules.
+                    With this access disabled, any command that attempts to
+                    access the network becomes an error.
+                </para>
+
+                <para>
+                    Disabling network access is useful for testing source
+                    mirrors, running builds when not connected to the Internet,
+                    and when operating in certain kinds of firewall
+                    environments.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BB_NUMBER_THREADS'><glossterm>BB_NUMBER_THREADS</glossterm>
+            <glossdef>
+                <para>
+                    The maximum number of tasks BitBake should run in parallel
+                    at any one time.
+                    If your host development system supports multiple cores,
+                    a good rule of thumb is to set this variable to twice the
+                    number of cores.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BB_NUMBER_PARSE_THREADS'><glossterm>BB_NUMBER_PARSE_THREADS</glossterm>
+            <glossdef>
+                <para>
+                    Sets the number of threads BitBake uses when parsing.
+                    By default, the number of threads is equal to the number
+                    of cores on the system.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BB_ORIGENV'><glossterm>BB_ORIGENV</glossterm>
+            <glossdef>
+                <para>
+                    Contains a copy of the original external environment in
+                    which BitBake was run.
+                    The copy is taken before any whitelisted variable values
+                    are filtered into BitBake's datastore.
+                    <note>
+                        The contents of this variable is a datastore object
+                        that can be queried using the normal datastore
+                        operations.
+                    </note>
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BB_PRESERVE_ENV'><glossterm>BB_PRESERVE_ENV</glossterm>
+            <glossdef>
+                <para>
+                    Disables whitelisting and instead allows all variables
+                    through from the external environment into BitBake's
+                    datastore.
+                    <note>
+                        You must set this variable in the external
+                        environment in order for it to work.
+                    </note>
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BB_RUNFMT'><glossterm>BB_RUNFMT</glossterm>
+            <glossdef>
+                <para>
+                    Specifies the name of the executable script files
+                    (i.e. run files) saved into
+                    <filename>${</filename><link linkend='var-T'><filename>T</filename></link><filename>}</filename>.
+                    By default, the <filename>BB_RUNFMT</filename> variable
+                    is undefined and the run file names get created using the
+                    following form:
+                    <literallayout class='monospaced'>
+     run.{task}.{pid}
+                    </literallayout>
+                    If you want to force run files to take a specific name,
+                    you can set this variable in a configuration file.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BB_RUNTASK'><glossterm>BB_RUNTASK</glossterm>
+            <glossdef>
+                <para>
+                    Contains the name of the currently executing task.
+                    The value does not include the "do_" prefix.
+                    For example, if the currently executing task is
+                    <filename>do_config</filename>, the value is
+                    "config".
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BB_SCHEDULER'><glossterm>BB_SCHEDULER</glossterm>
+            <glossdef>
+                <para>
+                    Selects the name of the scheduler to use for the
+                    scheduling of BitBake tasks.
+                    Three options exist:
+                    <itemizedlist>
+                        <listitem><para><emphasis>basic</emphasis> -
+                            The basic framework from which everything derives.
+                            Using this option causes tasks to be ordered
+                            numerically as they are parsed.
+                            </para></listitem>
+                        <listitem><para><emphasis>speed</emphasis> -
+                            Executes tasks first that have more tasks
+                            depending on them.
+                            The "speed" option is the default.
+                            </para></listitem>
+                        <listitem><para><emphasis>completion</emphasis> -
+                            Causes the scheduler to try to complete a given
+                            recipe once its build has started.
+                            </para></listitem>
+                    </itemizedlist>
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BB_SCHEDULERS'><glossterm>BB_SCHEDULERS</glossterm>
+            <glossdef>
+                <para>
+                    Defines custom schedulers to import.
+                    Custom schedulers need to be derived from the
+                    <filename>RunQueueScheduler</filename> class.
+                </para>
+
+                <para>
+                    For information how to select a scheduler, see the
+                    <link linkend='var-BB_SCHEDULER'><filename>BB_SCHEDULER</filename></link>
+                    variable.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BB_SETSCENE_DEPVALID'><glossterm>BB_SETSCENE_DEPVALID</glossterm>
+            <glossdef>
+                <para>
+                    Specifies a function BitBake calls that determines
+                    whether BitBake requires a setscene dependency to be met.
+                </para>
+
+                <para>
+                    When running a setscene task, BitBake needs to
+                    know which dependencies of that setscene task also need
+                    to be run.
+                    Whether dependencies also need to be run is highly
+                    dependent on the metadata.
+                    The function specified by this variable returns a
+                    "True" or "False" depending on whether the dependency needs
+                    to be met.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BB_SETSCENE_VERIFY_FUNCTION'><glossterm>BB_SETSCENE_VERIFY_FUNCTION</glossterm>
+            <glossdef>
+                <para>
+                    Specifies a function to call that verifies the list of
+                    planned task execution before the main task execution
+                    happens.
+                    The function is called once BitBake has a list of setscene
+                    tasks that have run and either succeeded or failed.
+                </para>
+
+                <para>
+                    The function allows for a task list check to see if they
+                    make sense.
+                    Even if BitBake was planning to skip a task, the
+                    returned value of the function can force BitBake to run
+                    the task, which is necessary under certain metadata
+                    defined circumstances.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BB_SIGNATURE_EXCLUDE_FLAGS'><glossterm>BB_SIGNATURE_EXCLUDE_FLAGS</glossterm>
+            <glossdef>
+                <para>
+                    Lists variable flags (varflags)
+                    that can be safely excluded from checksum
+                    and dependency data for keys in the datastore.
+                    When generating checksum or dependency data for keys in the
+                    datastore, the flags set against that key are normally
+                    included in the checksum.
+                </para>
+
+                <para>
+                    For more information on varflags, see the
+                    "<link linkend='variable-flags'>Variable Flags</link>"
+                    section.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BB_SIGNATURE_HANDLER'><glossterm>BB_SIGNATURE_HANDLER</glossterm>
+            <glossdef>
+                <para>
+                    Defines the name of the signature handler BitBake uses.
+                    The signature handler defines the way stamp files are
+                    created and handled, if and how the signature is
+                    incorporated into the stamps, and how the signature
+                    itself is generated.
+                </para>
+
+                <para>
+                    A new signature handler can be added by injecting a class
+                    derived from the
+                    <filename>SignatureGenerator</filename> class into the
+                    global namespace.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BB_SRCREV_POLICY'><glossterm>BB_SRCREV_POLICY</glossterm>
+            <glossdef>
+                <para>
+                    Defines the behavior of the fetcher when it interacts with
+                    source control systems and dynamic source revisions.
+                    The <filename>BB_SRCREV_POLICY</filename> variable is
+                    useful when working without a network.
+                </para>
+
+                <para>
+                    The variable can be set using one of two policies:
+                    <itemizedlist>
+                        <listitem><para><emphasis>cache</emphasis> -
+                            Retains the value the system obtained previously
+                            rather than querying the source control system
+                            each time.
+                            </para></listitem>
+                        <listitem><para><emphasis>clear</emphasis> -
+                            Queries the source controls system every time.
+                            With this policy, there is no cache.
+                            The "clear" policy is the default.
+                            </para></listitem>
+                    </itemizedlist>
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BB_STAMP_POLICY'><glossterm>BB_STAMP_POLICY</glossterm>
+            <glossdef>
+                <para>
+                    Defines the mode used for how timestamps of stamp files
+                    are compared.
+                    You can set the variable to one of the following modes:
+                    <itemizedlist>
+                        <listitem><para><emphasis>perfile</emphasis> -
+                            Timestamp comparisons are only made
+                            between timestamps of a specific recipe.
+                            This is the default mode.
+                            </para></listitem>
+                        <listitem><para><emphasis>full</emphasis> -
+                            Timestamp comparisons are made for all
+                            dependencies.
+                            </para></listitem>
+                        <listitem><para><emphasis>whitelist</emphasis> -
+                            Identical to "full" mode except timestamp
+                            comparisons are made for recipes listed in the
+                            <link linkend='var-BB_STAMP_WHITELIST'><filename>BB_STAMP_WHITELIST</filename></link>
+                            variable.
+                            </para></listitem>
+                    </itemizedlist>
+                    <note>
+                        Stamp policies are largely obsolete with the
+                        introduction of setscene tasks.
+                    </note>
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BB_STAMP_WHITELIST'><glossterm>BB_STAMP_WHITELIST</glossterm>
+            <glossdef>
+                <para>
+                    Lists files whose stamp file timestamps are compared when
+                    the stamp policy mode is set to "whitelist".
+                    For information on stamp policies, see the
+                    <link linkend='var-BB_STAMP_POLICY'><filename>BB_STAMP_POLICY</filename></link>
+                    variable.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BB_STRICT_CHECKSUM'><glossterm>BB_STRICT_CHECKSUM</glossterm>
+            <glossdef>
+                <para>
+                    Sets a more strict checksum mechanism for non-local URLs.
+                    Setting this variable to a value causes BitBake
+                    to report an error if it encounters a non-local URL
+                    that does not have at least one checksum specified.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BB_TASK_NICE_LEVEL'><glossterm>BB_TASK_NICE_LEVEL</glossterm>
+            <glossdef>
+                <para>
+                    Allows specific tasks to change their priority
+                    (i.e. nice level).
+                </para>
+
+                <para>
+                    You can use this variable in combination with task
+                    overrides to raise or lower priorities of specific tasks.
+                    For example, on the
+                    <ulink url='http://www.yoctoproject.org'>Yocto Project</ulink>
+                    autobuilder, QEMU emulation in images is given a higher
+                    priority as compared to build tasks to ensure that images
+                    do not suffer timeouts on loaded systems.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BB_TASKHASH'><glossterm>BB_TASKHASH</glossterm>
+            <glossdef>
+                <para>
+                    Within an executing task, this variable holds the hash
+                    of the task as returned by the currently enabled
+                    signature generator.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BB_VERBOSE_LOGS'><glossterm>BB_VERBOSE_LOGS</glossterm>
+            <glossdef>
+                <para>
+                    Controls how verbose BitBake is during builds.
+                    If set, shell scripts echo commands and shell script output
+                    appears on standard out (stdout).
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BB_WORKERCONTEXT'><glossterm>BB_WORKERCONTEXT</glossterm>
+            <glossdef>
+                <para>
+                    Specifies if the current context is executing a task.
+                    BitBake sets this variable to "1" when a task is
+                    being executed.
+                    The value is not set when the task is in server context
+                    during parsing or event handling.
+                </para>
+            </glossdef>
+        </glossentry>
+
+
+        <glossentry id='var-BBCLASSEXTEND'><glossterm>BBCLASSEXTEND</glossterm>
+            <glossdef>
+                <para>
+                    Allows you to extend a recipe so that it builds variants
+                    of the software.
+                    Some examples of these variants for recipes from the
+                    OpenEmbedded Core metadata are "natives" such as
+                    <filename>quilt-native</filename>, which is a copy of
+                    Quilt built to run on the build system; "crosses" such
+                    as <filename>gcc-cross</filename>, which is a compiler
+                    built to run on the build machine but produces binaries
+                    that run on the target <filename>MACHINE</filename>;
+                    "nativesdk", which targets the SDK machine instead of
+                    <filename>MACHINE</filename>; and "mulitlibs" in the form
+                    "<filename>multilib:</filename><replaceable>multilib_name</replaceable>".
+                </para>
+
+                <para>
+                    To build a different variant of the recipe with a minimal
+                    amount of code, it usually is as simple as adding the
+                    variable to your recipe.
+                    Here are two examples.
+                    The "native" variants are from the OpenEmbedded Core
+                    metadata:
+                    <literallayout class='monospaced'>
+     BBCLASSEXTEND =+ "native nativesdk"
+     BBCLASSEXTEND =+ "multilib:<replaceable>multilib_name</replaceable>"
+                    </literallayout>
+                </para>
+             </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BBDEBUG'><glossterm>BBDEBUG</glossterm>
+            <glossdef>
+                <para>
+                    Sets the BitBake debug output level to a specific value
+                    as incremented by the <filename>-d</filename> command line
+                    option.
+                    <note>
+                        You must set this variable in the external environment
+                        in order for it to work.
+                    </note>
+                </para>
+             </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BBFILE_COLLECTIONS'><glossterm>BBFILE_COLLECTIONS</glossterm>
+            <glossdef>
+                <para>Lists the names of configured layers.
+                    These names are used to find the other <filename>BBFILE_*</filename>
+                    variables.
+                    Typically, each layer appends its name to this variable in its
+                    <filename>conf/layer.conf</filename> file.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BBFILE_PATTERN'><glossterm>BBFILE_PATTERN</glossterm>
+            <glossdef>
+                <para>Variable that expands to match files from
+                    <link linkend='var-BBFILES'><filename>BBFILES</filename></link>
+                    in a particular layer.
+                    This variable is used in the <filename>conf/layer.conf</filename> file and must
+                    be suffixed with the name of the specific layer (e.g.
+                    <filename>BBFILE_PATTERN_emenlow</filename>).</para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BBFILE_PRIORITY'><glossterm>BBFILE_PRIORITY</glossterm>
+            <glossdef>
+                <para>Assigns the priority for recipe files in each layer.</para>
+                <para>This variable is useful in situations where the same recipe appears in
+                    more than one layer.
+                    Setting this variable allows you to prioritize a
+                    layer against other layers that contain the same recipe - effectively
+                    letting you control the precedence for the multiple layers.
+                    The precedence established through this variable stands regardless of a
+                    recipe's version
+                    (<link linkend='var-PV'><filename>PV</filename></link> variable).
+                    For example, a layer that has a recipe with a higher <filename>PV</filename> value but for
+                    which the <filename>BBFILE_PRIORITY</filename> is set to have a lower precedence still has a
+                    lower precedence.</para>
+                <para>A larger value for the <filename>BBFILE_PRIORITY</filename> variable results in a higher
+                    precedence.
+                    For example, the value 6 has a higher precedence than the value 5.
+                    If not specified, the <filename>BBFILE_PRIORITY</filename> variable is set based on layer
+                    dependencies (see the
+                    <filename><link linkend='var-LAYERDEPENDS'>LAYERDEPENDS</link></filename> variable for
+                    more information.
+                    The default priority, if unspecified
+                    for a layer with no dependencies, is the lowest defined priority + 1
+                    (or 1 if no priorities are defined).</para>
+                <tip>
+                    You can use the command <filename>bitbake-layers show-layers</filename> to list
+                    all configured layers along with their priorities.
+                </tip>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BBFILES'><glossterm>BBFILES</glossterm>
+            <glossdef>
+                <para>List of recipe files BitBake uses to build software.</para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BBINCLUDED'><glossterm>BBINCLUDED</glossterm>
+            <glossdef>
+                <para>
+                    Contains a space-separated list of all of all files that
+                    BitBake's parser included during parsing of the current
+                    file.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BBINCLUDELOGS'><glossterm>BBINCLUDELOGS</glossterm>
+            <glossdef>
+                <para>
+                    If set to a value, enables printing the task log when
+                    reporting a failed task.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BBINCLUDELOGS_LINES'><glossterm>BBINCLUDELOGS_LINES</glossterm>
+            <glossdef>
+                <para>
+                    If
+                    <link linkend='var-BBINCLUDELOGS'><filename>BBINCLUDELOGS</filename></link>
+                    is set, specifies the maximum number of lines from the
+                    task log file to print when reporting a failed task.
+                    If you do not set <filename>BBINCLUDELOGS_LINES</filename>,
+                    the entire log is printed.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BBLAYERS'><glossterm>BBLAYERS</glossterm>
+            <glossdef>
+                <para>Lists the layers to enable during the build.
+                    This variable is defined in the <filename>bblayers.conf</filename> configuration
+                    file in the build directory.
+                    Here is an example:
+                    <literallayout class='monospaced'>
+     BBLAYERS = " \
+       /home/scottrif/poky/meta \
+       /home/scottrif/poky/meta-yocto \
+       /home/scottrif/poky/meta-yocto-bsp \
+       /home/scottrif/poky/meta-mykernel \
+       "
+
+                    </literallayout>
+                    This example enables four layers, one of which is a custom, user-defined layer
+                    named <filename>meta-mykernel</filename>.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BBLAYERS_FETCH_DIR'><glossterm>BBLAYERS_FETCH_DIR</glossterm>
+            <glossdef>
+                <para>
+                    Sets the base location where layers are stored.
+                    By default, this location is set to
+                    <filename>${COREBASE}</filename>.
+                    This setting is used in conjunction with
+                    <filename>bitbake-layers layerindex-fetch</filename> and
+                    tells <filename>bitbake-layers</filename> where to place
+                    the fetched layers.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BBMASK'><glossterm>BBMASK</glossterm>
+            <glossdef>
+                <para>
+                    Prevents BitBake from processing recipes and recipe
+                    append files.
+                </para>
+
+                <para>
+                    You can use the <filename>BBMASK</filename> variable
+                    to "hide" these <filename>.bb</filename> and
+                    <filename>.bbappend</filename> files.
+                    BitBake ignores any recipe or recipe append files that
+                    match the expression.
+                    It is as if BitBake does not see them at all.
+                    Consequently, matching files are not parsed or otherwise
+                    used by BitBake.</para>
+                <para>
+                    The value you provide is passed to Python's regular
+                    expression compiler.
+                    The expression is compared against the full paths to
+                    the files.
+                    For complete syntax information, see Python's
+                    documentation at
+                    <ulink url='http://docs.python.org/release/2.3/lib/re-syntax.html'></ulink>.
+                </para>
+
+                <para>
+                    The following example uses a complete regular expression
+                    to tell BitBake to ignore all recipe and recipe append
+                    files in the <filename>meta-ti/recipes-misc/</filename>
+                    directory:
+                    <literallayout class='monospaced'>
+     BBMASK = "meta-ti/recipes-misc/"
+                    </literallayout>
+                    If you want to mask out multiple directories or recipes,
+                    use the vertical bar to separate the regular expression
+                    fragments.
+                    This next example masks out multiple directories and
+                    individual recipes:
+                    <literallayout class='monospaced'>
+     BBMASK = "meta-ti/recipes-misc/|meta-ti/recipes-ti/packagegroup/"
+     BBMASK .= "|.*meta-oe/recipes-support/"
+     BBMASK .= "|.*openldap"
+     BBMASK .= "|.*opencv"
+     BBMASK .= "|.*lzma"
+                    </literallayout>
+                    Notice how the vertical bar is used to append the fragments.
+                    <note>
+                        When specifying a directory name, use the trailing
+                        slash character to ensure you match just that directory
+                        name.
+                    </note>
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BBPATH'><glossterm>BBPATH</glossterm>
+            <glossdef>
+                <para>
+                    Used by BitBake to locate class
+                    (<filename>.bbclass</filename>) and configuration
+                    (<filename>.conf</filename>) files.
+                    This variable is analogous to the
+                    <filename>PATH</filename> variable.
+                </para>
+
+                <para>
+                    If you run BitBake from a directory outside of the
+                    build directory,
+                    you must be sure to set
+                    <filename>BBPATH</filename> to point to the
+                    build directory.
+                    Set the variable as you would any environment variable
+                    and then run BitBake:
+                    <literallayout class='monospaced'>
+     $ BBPATH="<replaceable>build_directory</replaceable>"
+     $ export BBPATH
+     $ bitbake <replaceable>target</replaceable>
+                    </literallayout>
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BBSERVER'><glossterm>BBSERVER</glossterm>
+            <glossdef>
+                <para>
+                    Points to the server that runs memory-resident BitBake.
+                    The variable is only used when you employ memory-resident
+                    BitBake.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BBVERSIONS'><glossterm>BBVERSIONS</glossterm>
+            <glossdef>
+                <para>
+                    Allows a single recipe to build multiple versions of a
+                    project from a single recipe file.
+                    You also able to specify conditional metadata
+                    using the
+                    <link linkend='var-OVERRIDES'><filename>OVERRIDES</filename></link>
+                    mechanism for a single version or for an optionally named
+                    range of versions.
+                </para>
+
+                <para>
+                    For more information on <filename>BBVERSIONS</filename>,
+                    see the
+                    "<link linkend='variants-class-extension-mechanism'>Variants - Class Extension Mechanism</link>"
+                    section.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BITBAKE_UI'><glossterm>BITBAKE_UI</glossterm>
+            <glossdef>
+                <para>
+                    Used to specify the UI module to use when running BitBake.
+                    Using this variable is equivalent to using the
+                    <filename>-u</filename> command-line option.
+                    <note>
+                        You must set this variable in the external environment
+                        in order for it to work.
+                    </note>
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BUILDNAME'><glossterm>BUILDNAME</glossterm>
+            <glossdef>
+                <para>
+                    A name assigned to the build.
+                    The name defaults to a datetime stamp of when the build was
+                    started but can be defined by the metadata.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-BZRDIR'><glossterm>BZRDIR</glossterm>
+            <glossdef>
+                <para>
+                    The directory in which files checked out of a Bazaar
+                    system are stored.
+                </para>
+            </glossdef>
+        </glossentry>
+
+    </glossdiv>
+
+    <glossdiv id='var-glossary-c'><title>C</title>
+
+        <glossentry id='var-CACHE'><glossterm>CACHE</glossterm>
+            <glossdef>
+                <para>
+                    Specifies the directory BitBake uses to store a cache
+                    of the metadata so it does not need to be parsed every
+                    time BitBake is started.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-CVSDIR'><glossterm>CVSDIR</glossterm>
+            <glossdef>
+                <para>
+                    The directory in which files checked out under the
+                    CVS system are stored.
+                </para>
+            </glossdef>
+        </glossentry>
+
+    </glossdiv>
+
+    <glossdiv id='var-glossary-d'><title>D</title>
+
+        <glossentry id='var-DEFAULT_PREFERENCE'><glossterm>DEFAULT_PREFERENCE</glossterm>
+            <glossdef>
+                <para>
+                    Specifies a weak bias for recipe selection priority.
+                </para>
+                <para>
+                    The most common usage of this is variable is to set
+                    it to "-1" within a recipe for a development version of a
+                    piece of software.
+                    Using the variable in this way causes the stable version
+                    of the recipe to build by default in the absence of
+                    <filename><link linkend='var-PREFERRED_VERSION'>PREFERRED_VERSION</link></filename>
+                    being used to build the development version.
+                </para>
+                <note>
+                    The bias provided by <filename>DEFAULT_PREFERENCE</filename>
+                    is weak and is overridden by
+                    <filename><link linkend='var-BBFILE_PRIORITY'>BBFILE_PRIORITY</link></filename>
+                    if that variable is different between two layers
+                    that contain different versions of the same recipe.
+                </note>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-DEPENDS'><glossterm>DEPENDS</glossterm>
+            <glossdef>
+                <para>
+                    Lists a recipe's build-time dependencies
+                    (i.e. other recipe files).
+                </para>
+
+                <para>
+                    Consider this simple example for two recipes named "a" and
+                    "b" that produce similarly named packages.
+                    In this example, the <filename>DEPENDS</filename>
+                    statement appears in the "a" recipe:
+                    <literallayout class='monospaced'>
+     DEPENDS = "b"
+                    </literallayout>
+                    Here, the dependency is such that the
+                    <filename>do_configure</filename> task for recipe "a"
+                    depends on the <filename>do_populate_sysroot</filename>
+                    task of recipe "b".
+                    This means anything that recipe "b" puts into sysroot
+                    is available when recipe "a" is configuring itself.
+                </para>
+
+                <para>
+                    For information on runtime dependencies, see the
+                    <link linkend='var-RDEPENDS'><filename>RDEPENDS</filename></link>
+                    variable.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-DESCRIPTION'><glossterm>DESCRIPTION</glossterm>
+            <glossdef>
+                <para>
+                    A long description for the recipe.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-DL_DIR'><glossterm>DL_DIR</glossterm>
+            <glossdef>
+                <para>
+                    The central download directory used by the build process to
+                    store downloads.
+                    By default, <filename>DL_DIR</filename> gets files
+                    suitable for mirroring for everything except Git
+                    repositories.
+                    If you want tarballs of Git repositories, use the
+                    <link linkend='var-BB_GENERATE_MIRROR_TARBALLS'><filename>BB_GENERATE_MIRROR_TARBALLS</filename></link>
+                    variable.
+                </para>
+            </glossdef>
+
+        </glossentry>
+    </glossdiv>
+
+    <glossdiv id='var-glossary-e'><title>E</title>
+
+        <glossentry id='var-EXCLUDE_FROM_WORLD'><glossterm>EXCLUDE_FROM_WORLD</glossterm>
+            <glossdef>
+                <para>
+                    Directs BitBake to exclude a recipe from world builds (i.e.
+                    <filename>bitbake world</filename>).
+                    During world builds, BitBake locates, parses and builds all
+                    recipes found in every layer exposed in the
+                    <filename>bblayers.conf</filename> configuration file.
+                </para>
+
+                <para>
+                    To exclude a recipe from a world build using this variable,
+                    set the variable to "1" in the recipe.
+                </para>
+
+                <note>
+                    Recipes added to <filename>EXCLUDE_FROM_WORLD</filename>
+                    may still be built during a world build in order to satisfy
+                    dependencies of other recipes.
+                    Adding a recipe to <filename>EXCLUDE_FROM_WORLD</filename>
+                    only ensures that the recipe is not explicitly added
+                    to the list of build targets in a world build.
+                </note>
+            </glossdef>
+        </glossentry>
+
+    </glossdiv>
+
+    <glossdiv id='var-glossary-f'><title>F</title>
+
+        <glossentry id='var-FAKEROOT'><glossterm>FAKEROOT</glossterm>
+            <glossdef>
+                <para>
+                     Contains the command to use when running a shell script
+                     in a fakeroot environment.
+                     The <filename>FAKEROOT</filename> variable is obsolete
+                     and has been replaced by the other
+                     <filename>FAKEROOT*</filename> variables.
+                     See these entries in the glossary for more information.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-FAKEROOTBASEENV'><glossterm>FAKEROOTBASEENV</glossterm>
+            <glossdef>
+                <para>
+                     Lists environment variables to set when executing
+                     the command defined by
+                     <link linkend='var-FAKEROOTCMD'><filename>FAKEROOTCMD</filename></link>
+                     that starts the bitbake-worker process
+                     in the fakeroot environment.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-FAKEROOTCMD'><glossterm>FAKEROOTCMD</glossterm>
+            <glossdef>
+                <para>
+                     Contains the command that starts the bitbake-worker
+                     process in the fakeroot environment.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-FAKEROOTDIRS'><glossterm>FAKEROOTDIRS</glossterm>
+            <glossdef>
+                <para>
+                     Lists directories to create before running a task in
+                     the fakeroot environment.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-FAKEROOTENV'><glossterm>FAKEROOTENV</glossterm>
+            <glossdef>
+                <para>
+                     Lists environment variables to set when running a task
+                     in the fakeroot environment.
+                     For additional information on environment variables and
+                     the fakeroot environment, see the
+                     <link linkend='var-FAKEROOTBASEENV'><filename>FAKEROOTBASEENV</filename></link>
+                     variable.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-FAKEROOTNOENV'><glossterm>FAKEROOTNOENV</glossterm>
+            <glossdef>
+                <para>
+                     Lists environment variables to set when running a task
+                     that is not in the fakeroot environment.
+                     For additional information on environment variables and
+                     the fakeroot environment, see the
+                     <link linkend='var-FAKEROOTENV'><filename>FAKEROOTENV</filename></link>
+                     variable.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-FETCHCMD'><glossterm>FETCHCMD</glossterm>
+            <glossdef>
+                <para>
+                    Defines the command the BitBake fetcher module
+                    executes when running fetch operations.
+                    You need to use an override suffix when you use the
+                    variable (e.g. <filename>FETCHCMD_git</filename>
+                    or <filename>FETCHCMD_svn</filename>).
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-FILE'><glossterm>FILE</glossterm>
+            <glossdef>
+                <para>
+                    Points at the current file.
+                    BitBake sets this variable during the parsing process
+                    to identify the file being parsed.
+                    BitBake also sets this variable when a recipe is being
+                    executed to identify the recipe file.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-FILESDIR'><glossterm>FILESDIR</glossterm>
+            <glossdef>
+                <para>
+                    Specifies directories BitBake uses when searching for
+                    patches and files.
+                    The "local" fetcher module uses these directories when
+                    handling <filename>file://</filename> URLs if the file
+                    was not found using
+                    <link linkend='var-FILESPATH'><filename>FILESPATH</filename></link>.
+                    <note>
+                        The <filename>FILESDIR</filename> variable is
+                        deprecated and you should use
+                        <filename>FILESPATH</filename> in all new code.
+                    </note>
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-FILESPATH'><glossterm>FILESPATH</glossterm>
+            <glossdef>
+                <para>
+                    Specifies directories BitBake uses when searching for
+                    patches and files.
+                    The "local" fetcher module uses these directories when
+                    handling <filename>file://</filename> URLs.
+                    The variable behaves like a shell <filename>PATH</filename>
+                    environment variable.
+                    The value is a colon-separated list of directories that
+                    are searched left-to-right in order.
+                </para>
+            </glossdef>
+        </glossentry>
+
+    </glossdiv>
+
+
+    <glossdiv id='var-glossary-g'><title>G</title>
+
+        <glossentry id='var-GITDIR'><glossterm>GITDIR</glossterm>
+            <glossdef>
+                <para>
+                    The directory in which a local copy of a Git repository
+                    is stored when it is cloned.
+                </para>
+            </glossdef>
+        </glossentry>
+
+    </glossdiv>
+
+
+    <glossdiv id='var-glossary-h'><title>H</title>
+
+        <glossentry id='var-HGDIR'><glossterm>HGDIR</glossterm>
+            <glossdef>
+                <para>
+                    The directory in which files checked out of a Mercurial
+                    system are stored.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-HOMEPAGE'><glossterm>HOMEPAGE</glossterm>
+            <glossdef>
+                <para>Website where more information about the software the recipe is building
+                    can be found.</para>
+            </glossdef>
+        </glossentry>
+
+    </glossdiv>
+
+    <glossdiv id='var-glossary-i'><title>I</title>
+
+        <glossentry id='var-INHERIT'><glossterm>INHERIT</glossterm>
+            <glossdef>
+                <para>
+                    Causes the named class to be inherited at
+                    this point during parsing.
+                    The variable is only valid in configuration files.
+                </para>
+            </glossdef>
+        </glossentry>
+
+    </glossdiv>
+
+<!--
+    <glossdiv id='var-glossary-j'><title>J</title>
+    </glossdiv>
+
+    <glossdiv id='var-glossary-k'><title>K</title>
+    </glossdiv>
+-->
+
+    <glossdiv id='var-glossary-l'><title>L</title>
+
+        <glossentry id='var-LAYERDEPENDS'><glossterm>LAYERDEPENDS</glossterm>
+            <glossdef>
+                <para>Lists the layers, separated by spaces, upon which this recipe depends.
+                    Optionally, you can specify a specific layer version for a dependency
+                    by adding it to the end of the layer name with a colon, (e.g. "anotherlayer:3"
+                    to be compared against
+                    <link linkend='var-LAYERVERSION'><filename>LAYERVERSION</filename></link><filename>_anotherlayer</filename>
+                    in this case).
+                    BitBake produces an error if any dependency is missing or
+                    the version numbers do not match exactly (if specified).</para>
+                <para>
+                    You use this variable in the <filename>conf/layer.conf</filename> file.
+                    You must also use the specific layer name as a suffix
+                    to the variable (e.g. <filename>LAYERDEPENDS_mylayer</filename>).</para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-LAYERDIR'><glossterm>LAYERDIR</glossterm>
+            <glossdef>
+                <para>When used inside the <filename>layer.conf</filename> configuration
+                    file, this variable provides the path of the current layer.
+                    This variable is not available outside of <filename>layer.conf</filename>
+                    and references are expanded immediately when parsing of the file completes.</para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-LAYERVERSION'><glossterm>LAYERVERSION</glossterm>
+            <glossdef>
+                <para>Optionally specifies the version of a layer as a single number.
+                    You can use this variable within
+                    <link linkend='var-LAYERDEPENDS'><filename>LAYERDEPENDS</filename></link>
+                    for another layer in order to depend on a specific version
+                    of the layer.</para>
+                <para>
+                    You use this variable in the <filename>conf/layer.conf</filename> file.
+                    You must also use the specific layer name as a suffix
+                    to the variable (e.g. <filename>LAYERDEPENDS_mylayer</filename>).</para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-LICENSE'><glossterm>LICENSE</glossterm>
+            <glossdef>
+                <para>
+                    The list of source licenses for the recipe.
+                </para>
+            </glossdef>
+        </glossentry>
+
+    </glossdiv>
+
+    <glossdiv id='var-glossary-m'><title>M</title>
+
+        <glossentry id='var-MIRRORS'><glossterm>MIRRORS</glossterm>
+            <glossdef>
+                <para>
+                    Specifies additional paths from which BitBake gets source code.
+                    When the build system searches for source code, it first
+                    tries the local download directory.
+                    If that location fails, the build system tries locations
+                    defined by
+                    <link linkend='var-PREMIRRORS'><filename>PREMIRRORS</filename></link>,
+                    the upstream source, and then locations specified by
+                    <filename>MIRRORS</filename> in that order.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-MULTI_PROVIDER_WHITELIST'><glossterm>MULTI_PROVIDER_WHITELIST</glossterm>
+            <glossdef>
+                <para>
+                    Allows you to suppress BitBake warnings caused when
+                    building two separate recipes that provide the same
+                    output.
+                </para>
+
+                <para>
+                    Bitbake normally issues a warning when building two
+                    different recipes where each provides the same output.
+                    This scenario is usually something the user does not
+                    want.
+                    However, cases do exist where it makes sense, particularly
+                    in the <filename>virtual/*</filename> namespace.
+                    You can use this variable to suppress BitBake's warnings.
+                </para>
+
+                <para>
+                    To use the variable, list provider names (e.g.
+                    recipe names, <filename>virtual/kernel</filename>,
+                    and so forth).
+                </para>
+            </glossdef>
+        </glossentry>
+
+    </glossdiv>
+
+<!--
+    <glossdiv id='var-glossary-n'><title>N</title>
+    </glossdiv>
+-->
+
+    <glossdiv id='var-glossary-o'><title>O</title>
+
+        <glossentry id='var-OVERRIDES'><glossterm>OVERRIDES</glossterm>
+            <glossdef>
+                <para>
+                    BitBake uses <filename>OVERRIDES</filename> to control
+                    what variables are overridden after BitBake parses
+                    recipes and configuration files.
+                </para>
+
+                <para>
+                    Following is a simple example that uses an overrides
+                    list based on machine architectures:
+                    <literallayout class='monospaced'>
+     OVERRIDES = "arm:x86:mips:powerpc"
+                    </literallayout>
+                    You can find information on how to use
+                    <filename>OVERRIDES</filename> in the
+                    "<link linkend='conditional-syntax-overrides'>Conditional Syntax (Overrides)</link>"
+                    section.
+                </para>
+            </glossdef>
+        </glossentry>
+    </glossdiv>
+
+    <glossdiv id='var-glossary-p'><title>P</title>
+
+        <glossentry id='var-PACKAGES'><glossterm>PACKAGES</glossterm>
+            <glossdef>
+                <para>The list of packages the recipe creates.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-PACKAGES_DYNAMIC'><glossterm>PACKAGES_DYNAMIC</glossterm>
+            <glossdef>
+                <para>
+                    A promise that your recipe satisfies runtime dependencies
+                    for optional modules that are found in other recipes.
+                    <filename>PACKAGES_DYNAMIC</filename>
+                    does not actually satisfy the dependencies, it only states that
+                    they should be satisfied.
+                    For example, if a hard, runtime dependency
+                    (<link linkend='var-RDEPENDS'><filename>RDEPENDS</filename></link>)
+                    of another package is satisfied during the build
+                    through the <filename>PACKAGES_DYNAMIC</filename>
+                    variable, but a package with the module name is never actually
+                    produced, then the other package will be broken.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-PE'><glossterm>PE</glossterm>
+            <glossdef>
+                <para>
+                    The epoch of the recipe.
+                    By default, this variable is unset.
+                    The variable is used to make upgrades possible when the
+                    versioning scheme changes in some backwards incompatible
+                    way.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-PERSISTENT_DIR'><glossterm>PERSISTENT_DIR</glossterm>
+            <glossdef>
+                <para>
+                    Specifies the directory BitBake uses to store data that
+                    should be preserved between builds.
+                    In particular, the data stored is the data that uses
+                    BitBake's persistent data API and the data used by the
+                    PR Server and PR Service.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-PF'><glossterm>PF</glossterm>
+            <glossdef>
+                <para>
+                    Specifies the recipe or package name and includes all version and revision
+                    numbers (i.e. <filename>eglibc-2.13-r20+svnr15508/</filename> and
+                    <filename>bash-4.2-r1/</filename>).
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-PN'><glossterm>PN</glossterm>
+            <glossdef>
+                <para>The recipe name.</para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-PR'><glossterm>PR</glossterm>
+            <glossdef>
+                <para>The revision of the recipe.
+                    </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-PREFERRED_PROVIDER'><glossterm>PREFERRED_PROVIDER</glossterm>
+            <glossdef>
+                <para>
+                    Determines which recipe should be given preference when
+                    multiple recipes provide the same item.
+                    You should always suffix the variable with the name of the
+                    provided item, and you should set it to the
+                    <link linkend='var-PN'><filename>PN</filename></link>
+                    of the recipe to which you want to give precedence.
+                    Some examples:
+                    <literallayout class='monospaced'>
+     PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto"
+     PREFERRED_PROVIDER_virtual/xserver = "xserver-xf86"
+     PREFERRED_PROVIDER_virtual/libgl ?= "mesa"
+                    </literallayout>
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-PREFERRED_PROVIDERS'><glossterm>PREFERRED_PROVIDERS</glossterm>
+            <glossdef>
+                <para>
+                    Determines which recipe should be given preference for
+                    cases where multiple recipes provide the same item.
+                    Functionally,
+                    <filename>PREFERRED_PROVIDERS</filename> is identical to
+                    <link linkend='var-PREFERRED_PROVIDER'><filename>PREFERRED_PROVIDER</filename></link>.
+                    However, the <filename>PREFERRED_PROVIDERS</filename>
+                    variable lets you define preferences for multiple
+                    situations using the following form:
+                    <literallayout class='monospaced'>
+     PREFERRED_PROVIDERS = "xxx:yyy aaa:bbb ..."
+                    </literallayout>
+                    This form is a convenient replacement for the following:
+                    <literallayout class='monospaced'>
+     PREFERRED_PROVIDER_xxx = "yyy"
+     PREFERRED_PROVIDER_aaa = "bbb"
+                    </literallayout>
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-PREFERRED_VERSION'><glossterm>PREFERRED_VERSION</glossterm>
+            <glossdef>
+                <para>
+                    If there are multiple versions of recipes available, this
+                    variable determines which recipe should be given preference.
+                    You must always suffix the variable with the
+                    <link linkend='var-PN'><filename>PN</filename></link>
+                    you want to select, and you should set
+                    <link linkend='var-PV'><filename>PV</filename></link>
+                    accordingly for precedence.
+                    You can use the "<filename>%</filename>" character as a
+                    wildcard to match any number of characters, which can be
+                    useful when specifying versions that contain long revision
+                    numbers that could potentially change.
+                    Here are two examples:
+                    <literallayout class='monospaced'>
+     PREFERRED_VERSION_python = "2.7.3"
+     PREFERRED_VERSION_linux-yocto = "3.10%"
+                    </literallayout>
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-PREMIRRORS'><glossterm>PREMIRRORS</glossterm>
+            <glossdef>
+                <para>
+                    Specifies additional paths from which BitBake gets source code.
+                    When the build system searches for source code, it first
+                    tries the local download directory.
+                    If that location fails, the build system tries locations
+                    defined by <filename>PREMIRRORS</filename>, the upstream
+                    source, and then locations specified by
+                    <link linkend='var-MIRRORS'><filename>MIRRORS</filename></link>
+                    in that order.
+                </para>
+
+                <para>
+                    Typically, you would add a specific server for the
+                    build system to attempt before any others by adding
+                    something like the following to your configuration:
+                    <literallayout class='monospaced'>
+     PREMIRRORS_prepend = "\
+     git://.*/.* http://www.yoctoproject.org/sources/ \n \
+     ftp://.*/.* http://www.yoctoproject.org/sources/ \n \
+     http://.*/.* http://www.yoctoproject.org/sources/ \n \
+     https://.*/.* http://www.yoctoproject.org/sources/ \n"
+                    </literallayout>
+                    These changes cause the build system to intercept
+                    Git, FTP, HTTP, and HTTPS requests and direct them to
+                    the <filename>http://</filename> sources mirror.
+                    You can use <filename>file://</filename> URLs to point
+                    to local directories or network shares as well.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-PROVIDES'><glossterm>PROVIDES</glossterm>
+            <glossdef>
+                <para>
+                    A list of aliases by which a particular recipe can be
+                    known.
+                    By default, a recipe's own
+                    <filename><link linkend='var-PN'>PN</link></filename>
+                    is implicitly already in its <filename>PROVIDES</filename>
+                    list.
+                    If a recipe uses <filename>PROVIDES</filename>, the
+                    additional aliases are synonyms for the recipe and can
+                    be useful satisfying dependencies of other recipes during
+                    the build as specified by
+                    <filename><link linkend='var-DEPENDS'>DEPENDS</link></filename>.
+                </para>
+
+                <para>
+                    Consider the following example
+                    <filename>PROVIDES</filename> statement from a recipe
+                    file <filename>libav_0.8.11.bb</filename>:
+                    <literallayout class='monospaced'>
+     PROVIDES += "libpostproc"
+                    </literallayout>
+                    The <filename>PROVIDES</filename> statement results in
+                    the "libav" recipe also being known as "libpostproc".
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-PRSERV_HOST'><glossterm>PRSERV_HOST</glossterm>
+            <glossdef>
+                <para>
+                    The network based
+                    <link linkend='var-PR'><filename>PR</filename></link>
+                    service host and port.
+                </para>
+
+                <para>
+                    Following is an example of how the <filename>PRSERV_HOST</filename> variable is
+                    set:
+                    <literallayout class='monospaced'>
+     PRSERV_HOST = "localhost:0"
+                    </literallayout>
+                    You must set the variable if you want to automatically
+                    start a local PR service.
+                    You can set <filename>PRSERV_HOST</filename> to other
+                    values to use a remote PR service.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-PV'><glossterm>PV</glossterm>
+            <glossdef>
+                <para>The version of the recipe.
+                 </para>
+            </glossdef>
+        </glossentry>
+
+    </glossdiv>
+
+<!--
+    <glossdiv id='var-glossary-q'><title>Q</title>
+    </glossdiv>
+-->
+
+    <glossdiv id='var-glossary-r'><title>R</title>
+
+        <glossentry id='var-RDEPENDS'><glossterm>RDEPENDS</glossterm>
+            <glossdef>
+                <para>
+                    Lists a package's runtime dependencies (i.e. other packages)
+                    that must be installed in order for the built package to run
+                    correctly.
+                    If a package in this list cannot be found during the build,
+                    you will get a build error.
+                </para>
+
+                <para>
+                    Because the <filename>RDEPENDS</filename> variable applies
+                    to packages being built, you should always use the variable
+                    in a form with an attached package name.
+                    For example, suppose you are building a development package
+                    that depends on the <filename>perl</filename> package.
+                    In this case, you would use the following
+                    <filename>RDEPENDS</filename> statement:
+                    <literallayout class='monospaced'>
+     RDEPENDS_${PN}-dev += "perl"
+                    </literallayout>
+                    In the example, the development package depends on
+                    the <filename>perl</filename> package.
+                    Thus, the <filename>RDEPENDS</filename> variable has the
+                    <filename>${PN}-dev</filename> package name as part of the
+                    variable.
+                </para>
+
+                <para>
+                    BitBake supports specifying versioned dependencies.
+                    Although the syntax varies depending on the packaging
+                    format, BitBake hides these differences from you.
+                    Here is the general syntax to specify versions with
+                    the <filename>RDEPENDS</filename> variable:
+                    <literallayout class='monospaced'>
+     RDEPENDS_${PN} = "<replaceable>package</replaceable> (<replaceable>operator</replaceable> <replaceable>version</replaceable>)"
+                    </literallayout>
+                    For <filename>operator</filename>, you can specify the
+                    following:
+                    <literallayout class='monospaced'>
+     =
+     &lt;
+     &gt;
+     &lt;=
+     &gt;=
+                    </literallayout>
+                    For example, the following sets up a dependency on version
+                    1.2 or greater of the package <filename>foo</filename>:
+                    <literallayout class='monospaced'>
+     RDEPENDS_${PN} = "foo (>= 1.2)"
+                    </literallayout>
+                </para>
+
+                <para>
+                    For information on build-time dependencies, see the
+                    <link linkend='var-DEPENDS'><filename>DEPENDS</filename></link>
+                    variable.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-RPROVIDES'><glossterm>RPROVIDES</glossterm>
+            <glossdef>
+                <para>
+                    A list of package name aliases that a package also provides.
+                    These aliases are useful for satisfying runtime dependencies
+                    of other packages both during the build and on the target
+                    (as specified by
+                    <filename><link linkend='var-RDEPENDS'>RDEPENDS</link></filename>).
+                </para>
+                <para>
+                   As with all package-controlling variables, you must always
+                   use the variable in conjunction with a package name override.
+                   Here is an example:
+                   <literallayout class='monospaced'>
+     RPROVIDES_${PN} = "widget-abi-2"
+                   </literallayout>
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-RRECOMMENDS'><glossterm>RRECOMMENDS</glossterm>
+            <glossdef>
+                <para>
+                    A list of packages that extends the usability of a package
+                    being built.
+                    The package being built does not depend on this list of
+                    packages in order to successfully build, but needs them for
+                    the extended usability.
+                    To specify runtime dependencies for packages, see the
+                    <filename><link linkend='var-RDEPENDS'>RDEPENDS</link></filename>
+                    variable.
+                </para>
+
+                <para>
+                    BitBake supports specifying versioned recommends.
+                    Although the syntax varies depending on the packaging
+                    format, BitBake hides these differences from you.
+                    Here is the general syntax to specify versions with
+                    the <filename>RRECOMMENDS</filename> variable:
+                    <literallayout class='monospaced'>
+     RRECOMMENDS_${PN} = "<replaceable>package</replaceable> (<replaceable>operator</replaceable> <replaceable>version</replaceable>)"
+                    </literallayout>
+                    For <filename>operator</filename>, you can specify the
+                    following:
+                    <literallayout class='monospaced'>
+     =
+     &lt;
+     &gt;
+     &lt;=
+     &gt;=
+                    </literallayout>
+                    For example, the following sets up a recommend on version
+                    1.2 or greater of the package <filename>foo</filename>:
+                    <literallayout class='monospaced'>
+     RRECOMMENDS_${PN} = "foo (>= 1.2)"
+                    </literallayout>
+                </para>
+            </glossdef>
+        </glossentry>
+
+    </glossdiv>
+
+    <glossdiv id='var-glossary-s'><title>S</title>
+
+        <glossentry id='var-SECTION'><glossterm>SECTION</glossterm>
+            <glossdef>
+                <para>The section in which packages should be categorized.</para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-SRC_URI'><glossterm>SRC_URI</glossterm>
+            <glossdef>
+                <para>
+                    The list of source files - local or remote.
+                    This variable tells BitBake which bits
+                    to pull for the build and how to pull them.
+                    For example, if the recipe or append file needs to
+                    fetch a single tarball from the Internet, the recipe or
+                    append file uses a <filename>SRC_URI</filename>
+                    entry that specifies that tarball.
+                    On the other hand, if the recipe or append file needs to
+                    fetch a tarball and include a custom file, the recipe or
+                    append file needs an <filename>SRC_URI</filename> variable
+                    that specifies all those sources.</para>
+                <para>The following list explains the available URI protocols:
+                    <itemizedlist>
+                        <listitem><para><emphasis><filename>file://</filename> -</emphasis>
+                            Fetches files, which are usually files shipped with
+                            the metadata,
+                            from the local machine.
+                            The path is relative to the
+                            <link linkend='var-FILESPATH'><filename>FILESPATH</filename></link>
+                            variable.</para></listitem>
+                        <listitem><para><emphasis><filename>bzr://</filename> -</emphasis> Fetches files from a
+                            Bazaar revision control repository.</para></listitem>
+                        <listitem><para><emphasis><filename>git://</filename> -</emphasis> Fetches files from a
+                            Git revision control repository.</para></listitem>
+                        <listitem><para><emphasis><filename>osc://</filename> -</emphasis> Fetches files from
+                            an OSC (OpenSUSE Build service) revision control repository.</para></listitem>
+                        <listitem><para><emphasis><filename>repo://</filename> -</emphasis> Fetches files from
+                            a repo (Git) repository.</para></listitem>
+                        <listitem><para><emphasis><filename>http://</filename> -</emphasis> Fetches files from
+                            the Internet using HTTP.</para></listitem>
+                        <listitem><para><emphasis><filename>https://</filename> -</emphasis> Fetches files
+                            from the Internet using HTTPS.</para></listitem>
+                        <listitem><para><emphasis><filename>ftp://</filename> -</emphasis> Fetches files
+                            from the Internet using FTP.</para></listitem>
+                        <listitem><para><emphasis><filename>cvs://</filename> -</emphasis> Fetches files from
+                            a CVS revision control repository.</para></listitem>
+                        <listitem><para><emphasis><filename>hg://</filename> -</emphasis> Fetches files from
+                            a Mercurial (<filename>hg</filename>) revision control repository.</para></listitem>
+                        <listitem><para><emphasis><filename>p4://</filename> -</emphasis> Fetches files from
+                            a Perforce (<filename>p4</filename>) revision control repository.</para></listitem>
+                        <listitem><para><emphasis><filename>ssh://</filename> -</emphasis> Fetches files from
+                            a secure shell.</para></listitem>
+                        <listitem><para><emphasis><filename>svn://</filename> -</emphasis> Fetches files from
+                            a Subversion (<filename>svn</filename>) revision control repository.</para></listitem>
+                    </itemizedlist>
+                </para>
+                <para>Here are some additional options worth mentioning:
+                    <itemizedlist>
+                        <listitem><para><emphasis><filename>unpack</filename> -</emphasis> Controls
+                            whether or not to unpack the file if it is an archive.
+                            The default action is to unpack the file.</para></listitem>
+                        <listitem><para><emphasis><filename>subdir</filename> -</emphasis> Places the file
+                            (or extracts its contents) into the specified
+                            subdirectory.
+                            This option is useful for unusual tarballs or other archives that
+                            do not have their files already in a subdirectory within the archive.
+                            </para></listitem>
+                        <listitem><para><emphasis><filename>name</filename> -</emphasis> Specifies a
+                            name to be used for association with <filename>SRC_URI</filename> checksums
+                            when you have more than one file specified in <filename>SRC_URI</filename>.
+                            </para></listitem>
+                        <listitem><para><emphasis><filename>downloadfilename</filename> -</emphasis> Specifies
+                            the filename used when storing the downloaded file.</para></listitem>
+                    </itemizedlist>
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-SRCDATE'><glossterm>SRCDATE</glossterm>
+            <glossdef>
+                <para>
+                    The date of the source code used to build the package.
+                    This variable applies only if the source was fetched from a Source Code Manager (SCM).
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-SRCREV'><glossterm>SRCREV</glossterm>
+            <glossdef>
+                <para>
+                    The revision of the source code used to build the package.
+                    This variable applies only when using Subversion, Git, Mercurial and Bazaar.
+                    If you want to build a fixed revision and you want
+                    to avoid performing a query on the remote repository every time
+                    BitBake parses your recipe, you should specify a <filename>SRCREV</filename> that is a
+                    full revision identifier and not just a tag.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-SRCREV_FORMAT'><glossterm>SRCREV_FORMAT</glossterm>
+            <glossdef>
+                <para>
+                    Helps construct valid
+                    <link linkend='var-SRCREV'><filename>SRCREV</filename></link>
+                    values when multiple source controlled URLs are used in
+                    <link linkend='var-SRC_URI'><filename>SRC_URI</filename></link>.
+                </para>
+
+                <para>
+                    The system needs help constructing these values under these
+                    circumstances.
+                    Each component in the <filename>SRC_URI</filename>
+                    is assigned a name and these are referenced
+                    in the <filename>SRCREV_FORMAT</filename> variable.
+                    Consider an example with URLs named "machine" and "meta".
+                    In this case, <filename>SRCREV_FORMAT</filename> could look
+                    like "machine_meta" and those names would have the SCM
+                    versions substituted into each position.
+                    Only one <filename>AUTOINC</filename> placeholder is added
+                    and if needed.
+                    And, this placeholder is placed at the start of the
+                    returned string.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-STAMP'><glossterm>STAMP</glossterm>
+            <glossdef>
+                <para>
+                    Specifies the base path used to create recipe stamp files.
+                    The path to an actual stamp file is constructed by evaluating this
+                    string and then appending additional information.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-STAMPCLEAN'><glossterm>STAMPCLEAN</glossterm>
+            <glossdef>
+                <para>
+                    Specifies the base path used to create recipe stamp files.
+                    Unlike the
+                    <link linkend='var-STAMP'><filename>STAMP</filename></link>
+                    variable, <filename>STAMPCLEAN</filename> can contain
+                    wildcards to match the range of files a clean operation
+                    should remove.
+                    BitBake uses a clean operation to remove any other stamps
+                    it should be removing when creating a new stamp.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-SUMMARY'><glossterm>SUMMARY</glossterm>
+            <glossdef>
+                <para>
+                    A short summary for the recipe, which is 72 characters or less.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-SVNDIR'><glossterm>SVNDIR</glossterm>
+            <glossdef>
+                <para>
+                    The directory in which files checked out of a Subversion
+                    system are stored.
+                </para>
+            </glossdef>
+        </glossentry>
+
+    </glossdiv>
+
+    <glossdiv id='var-glossary-t'><title>T</title>
+
+        <glossentry id='var-T'><glossterm>T</glossterm>
+            <glossdef>
+                <para>Points to a directory were BitBake places
+                    temporary files, which consist mostly of task logs and
+                    scripts, when building a particular recipe.
+                </para>
+            </glossdef>
+        </glossentry>
+
+        <glossentry id='var-TOPDIR'><glossterm>TOPDIR</glossterm>
+            <glossdef>
+                <para>
+                    Points to the build directory.
+                    BitBake automatically sets this variable.
+                </para>
+            </glossdef>
+        </glossentry>
+
+    </glossdiv>
+
+<!--
+    <glossdiv id='var-glossary-u'><title>U</title>
+    </glossdiv>
+
+    <glossdiv id='var-glossary-v'><title>V</title>
+   </glossdiv>
+
+    <glossdiv id='var-glossary-w'><title>W</title>
+    </glossdiv>
+
+    <glossdiv id='var-glossary-x'><title>X</title>
+    </glossdiv>
+
+    <glossdiv id='var-glossary-y'><title>Y</title>
+    </glossdiv>
+
+    <glossdiv id='var-glossary-z'><title>Z</title>
+    </glossdiv>
+-->
+
+
+</glossary>
+</chapter>
+<!--
+vim: expandtab tw=80 ts=4
+-->