poky: subtree update:c67f57c09e..c6bc20857c
Adrian Freihofer (2):
oe-publish-sdk: fix layers init via ssh
oe-publish-sdk: add --keep-orig option
Alexander Kanavin (68):
meta-selftest: correct the virgl test for 5.8 kernels
bison: upgrade 3.6.4 -> 3.7.1
util-linux: upgrade 2.35.2 -> 2.36
python3-numpy: upgrade 1.19.0 -> 1.19.1
python3-setuptools: upgrade 49.3.1 -> 49.6.0
rsync: upgrade 3.2.2 -> 3.2.3
util-linux: merge .inc into .bb
acpica: upgrade 20200528 -> 20200717
asciidoc: upgrade 9.0.1 -> 9.0.2
cryptodev: upgrade 1.10 -> 1.11
diffoscope: upgrade 153 -> 156
epiphany: upgrade 3.36.3 -> 3.36.4
font-alias: upgrade 1.0.3 -> 1.0.4
gtk+3: upgrade 3.24.21 -> 3.24.22
libcheck: upgrade 0.15.0 -> 0.15.2
libinput: upgrade 1.16.0 -> 1.16.1
libpipeline: upgrade 1.5.2 -> 1.5.3
libx11: upgrade 1.6.9 -> 1.6.11
linux-firmware: upgrade 20200619 -> 20200721
man-pages: upgrade 5.07 -> 5.08
mc: upgrade 4.8.24 -> 4.8.25
mesa: upgrade 20.1.4 -> 20.1.5
piglit: upgrade to latest revision
re2c: upgrade 2.0 -> 2.0.2
sysstat: upgrade 12.2.2 -> 12.4.0
vala: upgrade 0.48.7 -> 0.48.9
bootchart2: update 0.14.8 -> 0.14.9
harfbuzz: convert to meson, enable gobject introspection
pango: update 1.44.7 -> 1.46.0
boost: update 1.73.0 -> 1.74.0
xev: update 1.2.3 -> 1.2.4
wpebackend-fdo: update 1.6.1 -> 1.7.1
gpgme: update 1.13.1 -> 1.14.0
libpsl: update 0.21.0 -> 0.21.1.
gettext: update 0.20.2 -> 0.21
cmake: update 3.17.3 -> 3.18.1
linux-firmware: update 20200721 -> 20200817
meson: update 0.55.0 -> 0.55.1
systemd-boot: bump version to 246.2
json-glib: inherit upstream-version-is-even
packagegroup-core-device-devel: remove
oeqa/x32lib: rework to use readelf from the host
oeqa/multilib: rework to use readelf from the host
oeqa/multilib: un-skip the connman test
poky.conf: do not install packagegroup-core-device-devel into qemu images
glib-2.0: update 2.64.4 -> 2.64.5
cmake: upgrade 3.18.1 -> 3.18.2
libxcrypt: upgrade 4.4.16 -> 4.4.17
debianutils: upgrade 4.11 -> 4.11.1
enchant2: upgrade 2.2.8 -> 2.2.9
harfbuzz: upgrade 2.7.1 -> 2.7.2
libmpc: upgrade 1.1.0 -> 1.2.0
librepo: upgrade 1.12.0 -> 1.12.1
libuv: upgrade 1.38.1 -> 1.39.0
msmtp: upgrade 1.8.11 -> 1.8.12
ninja: upgrade 1.10.0 -> 1.10.1
p11-kit: upgrade 0.23.20 -> 0.23.21
pango: upgrade 1.46.0 -> 1.46.1
re2c: upgrade 2.0.2 -> 2.0.3
resolvconf: upgrade 1.82 -> 1.83
stress-ng: upgrade 0.11.18 -> 0.11.19
gnu-config: update to latest revision
nasm: update 2.15.03 -> 2.15.05
libva-utils: fix upstream version check
gnupg: update 2.2.21 -> 2.2.22
libx11: update 1.6.11 -> 1.6.12
mesa: update 20.1.5 -> 20.1.6
xserver-xorg: update 1.20.8 -> 1.20.9
Andrey Zhizhikin (1):
insane: check for missing update-alternatives inherit
Anibal Limon (1):
recipes-kernel: linux-firmware add qcom-venus-{5.2,5.4} packages
Aníbal Limón (1):
recipes-graphics/xorg-xserver: Add patch to fix segfault when probe
Armin Kuster (2):
bind: update to 9.11.22 ESV
core-image-sato: qemumips use 512 mem
Bruce Ashfield (30):
linux-yocto/5.4: update to v5.4.59
linux-yocto/5.8: update to v5.8.2
yocto-bsp: update to v5.4.56
yocto-bsp: update to v5.4.58
qemu: bump default reference kernel to v5.8
linux-yocto/5.8: fix perf and virtio_scsi warnings
linux-yocto-rt/5.8: fix lttng-modules build
linux-yocto/5.8: selftests/bpf: Prevent runqslower from racing on building bpftool
linux-yocto/5.8: disable CONFIG_NFS_DISABLE_UDP_SUPPORT
poky: set preferred version for linux-yocto to be v5.8
poky-tiny: set preferred version to 5.8
poky: add preferred version for linux-yocto-rt
linux-yocto/5.8: update to v5.8.3
linux-yocto/5.4: update to v5.4.60
kernel: config cleanups for 5.8+
linux-yocto/5.4: update to v5.4.61
linux-yocto/5.8: update to v5.8.4
linux-yocto/5.8: disable IKHEADERS in default builds
kernel-yocto: allow promotion of configuration warnings to errors
kernel-yocto: checksum all modifications to available kernel fragments directories
lttng-modules/devupstream: bump to latest 2.12 commits
linux-yocto-dev: bump to v5.9+
linux-yocto/5.8: update to v5.8.5
kernel-devsrc: account for HOSTCC and HOSTCXX
linux-yocto/config: netfilter: Enable nat for ipv4 and ipv6
linux-yocto/5.8: update to v5.8.8
linux-yocto/5.4: update to v5.4.64
linux-yocto/config: configuration warning cleanup
linux-yocto/5.8: update to v5.8.9
linux-yocto/5.4: update to v5.4.65
Changhyeok Bae (2):
iw: upgrade 5.4 -> 5.8
iputils: upgrade s20190709 -> s20200821
Chris Laplante (12):
bitbake: compat.py: remove file since it no longer actually implements anything
bitbake: COW: formatting
bitbake: COW: migrate test suite into tests/cow
cve-update-db-native: add progress handler
cve-check/cve-update-db-native: use lockfile to fix usage under multiconfig
cve-update-db-native: use context manager for cve_f
cve-check: avoid FileNotFoundError if no do_cve_check task has run
bitbake: utils: process_profilelog: use context manager
bitbake: utils: fix UnboundLocalError when _print_exception raises
cve-update-db-native: be less magical about checking whether the cve-check class is enabled
cve-update-db-native: move -journal checking into do_fetch
cve-update-db-native: remove unused variable
Christophe GUIBOUT (1):
initramfs-framework: support kernel cmdline with double quotes
Denys Dmytriyenko (2):
weston: upgrade 8.0.0 -> 9.0.0
cryptodev: bump 1 commit past 1.11 to fix 5.9-rc1+
Diego Sueiro (2):
license_image.bbclass: Create symlink to the image license manifest dir
license_image.bbclass: Fix symlink to the image license manifest dir creation
Douglas Royds (1):
tcmode-default: Drop gcc-cross-initial, gcc-crosssdk-initial references
Frazer Clews (1):
bitbake: lib: fix most undefined code picked up by pylint
Geoff Parker (1):
systemd-serialgetty: Replace sed quoting using ' with " to allow var expansion
Jacob Kroon (1):
gcc10: Don't default back to -fcommon
Jean-Francois Dagenais (1):
bitbake: siggen: clean_basepath: remove recipe full path when virtual:xyz present
Jens Rehsack (1):
lttng-modules: backport patches from 2.12.x to fix 5.4.64+ and 5.8.9+ builds
Joe Slater (1):
pseudo: fix renaming to self
Jon Mason (4):
cortex-m0plus.inc: change file permissions
tune-cortexa55.inc: clean-up ARMv8.2a uses
tune-cortexa57-cortexa53.inc: add CRC and set march
tune-cortexa*: Cleanups
Joshua Watt (8):
wic: Add 512 Byte alignment to --offset
oeqa: runtime_tests: Extra GPG debugging
oeqa: sdk: Capture stderr output
oeqa: reproducible: Fix test not producing diffs
diffoscope: upgrade 156 -> 158
bitbake: bitbake: Add parsing torture test
bitbake: cooker: Block SIGINT in worker processes
sphinx: dev-manual: Clarify that virtual providers do not apply to runtime dependencies
Kai Kang (1):
dhcpcd: 9.1.4 -> 9.2.0
Kevin Hao (1):
meta-yocto-bsp: Bump to the v5.8 kernel
Khairul Rohaizzat Jamaluddin (1):
wic/bootimg-efi: IMAGE_EFI_BOOT_FILES variable added to separate bootimg-efi and bootimg-partition
Khem Raj (24):
gcc-cross-canadian: Install gcc/g++ wrappers for musl
uninative: Upgrade to 2.9
packagegroup-core-tools-profile: Disable lttng-modules for riscv64
lttng-modules: Disable on riscv64
kexec-tools: Fix build with -fno-common on ppc
lttng-tools: Do not build for riscv64
util-linux: Allow update alternatives for additional apps
lttng-tools: lttng-ust works on riscv64
json-glib: Backport a build fix with clang
rpcbind: Use update-alternatives for rpcinfo
go: Upgrade to 1.15 major release
weston-init: Redefine weston service and add socket activation option
musl: Upgrade to latest master
libucontext: Recognise riscv32 architecture
linuxloader.bbclass: Define riscv32 ldso for musl
populate_sdk_ext: Do not assume local.conf will always exist
weston: plane_add_prop() calls break musl atomic modesetting
weston-init: Enable RDP screen share
weston-init: Do not use fbdev backend
weston-init: Select drm/fbdev backends for qemu machines
oeqa/weston: Fix tests to run with systemd
core-image-weston: Bump qemu memory to 512M
go: Update to 1.15.2 minor release
bind: Inherit update-alternatives
Mark Hatle (6):
package_tar.bbclass: Sync to the other package_* classes
kernel.bbclass: Remove do_install[prefunc] no longer needed
buildhistory.bbclass: Rework to use read_subpackage_metadata
kernel.bbclass: Move away from calling package_get_auto_pr
package.bbclass: hash equivalency and pr service
bitbake: process.py: Handle SystemExit exception to eliminate backtrace
Mark Morton (1):
sphinx: test-manual code block, link, and format update
Martin Jansa (7):
devtool: expand SRC_URI when guessing recipe update mode
image-artifact-names: introduce new bbclass and move some variables into it
kernel.bbclass: use bash variables like imageType, base_name without {}
kernel.bbclass: eliminate (initramfs_)symlink_name variables
kernel.bbclass: use camelCase notation for bash variables in do_deploy
*-initramfs: don't use .rootfs IMAGE_NAME_SUFFIX
bitbake.conf: use ${TCMODE}-${TCLIBC} directory for CACHE
Matt Madison (1):
image.bbclass: fix REPRODUCIBLE_TIMESTAMP_ROOTFS reference
Michael Gloff (2):
sysvinit rc: Use PSPLASH_FIFO_DIR for progress fifo
sysvinit: Remove ${B} assignment
Michael Tretter (1):
devtool: deploy-target: Fix size calculation for hard links
Ming Liu (2):
systemd: split systemd specific udev rules into its own package
libubootenv: inherit uboot-config
Mingli Yu (3):
qemu: always define unknown_lock_type
qemu: override DEBUG_BUILD
bison: remove the parallel build patch
Naveen Saini (1):
lib/oe/recipeutils.py: add support for BBFILES_DYNAMIC
Nicolas Dechesne (73):
linux-libc-headers: kernel headers are installed in STAGING_KERNEL_BUILDDIR
bitbake: sphinx: add initial build infrastructure
bitbake: sphinx: initial sphinx support
bitbake: sphinx: bitbake-user-manual: use builtin sphinx glossary
bitbake: sphinx: switch to readthedocs theme
bitbake: sphinx: override theme CSS
bitbake: sphinx: fixup for links
bitbake: sphinx: fix links inside notes
bitbake: sphinx: fixes all remaining warnings
bitbake: sphinx: Makefile.sphinx: add clean and publish targets
bitbake: sphinx: tweak html output a bit
bitbake: sphinx: add SPDX headers
bitbake: sphinx: index: move the boilerplate at the end of the page
bitbake: sphinx: conf: enable extlinks extension
bitbake: sphinx: add releases page
bitbake: sphinx: bitbake-user-manual: insert additional blank line after title
bitbake: sphinx: last manual round of fixes/improvements
bitbake: sphinx: update style for important, caution and warnings
bitbake: sphinx: remove leading '/'
bitbake: sphinx: theme_override: properly set font for verbatim text
bitbake: bitbake-user-manual: fix bad links
sphinx: add initial build infrastructure
sphinx: initial sphinx support
sphinx: ref-variables: use builtin sphinx glossary
sphinx: overview-manual: add figures
sphinx: switch to readthedocs theme
sphinx: Add SPDX license headers
sphinx: add CSS theme override
sphinx: bsp-guide: add figures
sphinx: add Yocto project logo
sphinx: conf: update copyright
sphinx: conf: add substitutions/global variables
sphinx: add boilerplate file
sphinx: add boilerplate to manuals
sphinx: ref-manual: add revision history table
sphinx: add a general index
sphinx: conf.py: enable sphinx.ext.autosectionlabel
sphinx: ref-manual: use builtin glossary for the Terms section
sphinx: fix internal links
sphinx: ref-manual: fix typo
sphinx: fix custom term links
sphinx: manual updates for some links
sphinx: dev-manual add figures
sphinx: kernel-dev: add figures
sphinx: profile-manual: add figures
sphinx: fix up bold text for informalexample container
sphinx: ref-manual: add figures
sphinx: sdk-manual: add figures
sphinx: test-manual: add figures
sphinx: toaster-manual: add figures
sphinx: add links for Yocto project website
sphinx: fix links when the link text should be displayed
sphinx: add links to terms in the BitBake glossary
sphinx: add links to section in the Bitbake manual
sphinx: setup extlink for docs.yoctoproject.org
sphinx: enable intersphinx extension
sphinx: insert blank below between title and toc
sphinx: fix up terms related to kernel-fitimage
sphinx: conf: a few rendering tweaks
sphinx: makefile: add publish target
sphinx: conf: include CSS/JS files, the proper way
sphinx: convert 'what I wish I'd known'
sphinx: convert 'transitioning to a custom environment'
sphinx: ref-manual: fix heading for oe-init-build-env
sphinx: brief-yoctoprojectqs: fix up all remaining rendering issues
sphinx: Makefile.sphinx improvements
sphinx: convert bsp-guide
sphinx: remove leading '/'
sphinx: update style for important, caution and warnings
sphinx: profile-manual: convert profile-manual
sphinx: theme_override: properly set font for verbatim text
sphinx: theme_override: add tying-it-together admonition
sphinx: conf: exclude adt-manual/*.rst
Oleksandr Kravchuk (1):
ell: update to 0.33
Ovidiu Panait (1):
libxml2: Fix CVE-2020-24977
Peter A. Bigot (2):
bluez5: fix builds that require ell support
timezone: include leap second data in tzdata-core
Peter Bergin (1):
systemd: avoid failing if no udev rules provided
Pierre-Jean Texier (2):
libubootenv: upgrade 0.3 -> 0.3.1
diffoscope: upgrade 158 -> 160
Quentin Schulz (16):
sphinx: brief-yoctoprojectqs: remove redundant welcome
sphinx: brief-yoctoprojectqs: fix ambiguous note for cyclone5 example
sphinx: brief-yoctoprojectqs: add missing boilerplate
sphinx: overview-manual: add link to AUH how-to section
sphinx: overview-manual: fix bitbake basic explanation
sphinx: brief-yoctoprojectqs: add note on branch consistency between layers
sphinx: what-i-wish-id-known: update "don't be fooled by doc search results"
sphinx: overview-manual: remove highlight in bold section
sphinx: replace special quotes with single and double quotes
sphinx: fix incorrect indentations
sphinx: brief-yoctoprojectqs: put other distros note after Ubuntu-specific packages
sphinx: fix a few typos or missing/too many words
sphinx: "highlight" some variables, tasks or files
sphinx: fix or add missing links and remove mention of Eclipse workflow
ref-manual: examples: hello-autotools: upgrade to 2.10
ref-manual: examples: libxpm: add relative path to .inc
Rahul Kumar (1):
systemd-serialgetty: Fix sed expression quoting
Rasmus Villemoes (1):
kernel.bbclass: run do_symlink_kernsrc before do_patch
Richard Purdie (74):
nativesdk-sdk-provides-dummy: Add /bin/sh
bitbake: fetch2/wget: Remove buffering parameter
bitbake: cooker: Ensure parse_quit thread is closed down
bitbake: cooker: Explictly shut down the sync thread
bitbake: fetch2: Drop cups.org from wget status checks
bitbake: build/msg: Cleanup verbose option handling
bitbake: cooker/cookerdata/main: Improve loglevel handling
bitbake: cookerdata: Ensure UI options are updated to the server
bitbake: cooker/cookerdata: Ensure UI event log is updated from commandline
bitbake: cooker: Defer configuration init to after UI connection
bitbake: server/process: Move the socket code to server process only
bitbake: main/server/process: Drop configuration object passing
bitbake: cooker: Ensure BB_ORIGENV is updated by changes to configuration.env
bitbake: server/process: Log extra threads at exit
bitbake: server/process: Add bitbake-server and exec() a new server process
bitbake: runqueue: Don't use sys.argv
bitbake: cooker: Ensure cooker's enviroment is updated on updateConfig
connman-gnome/matchbox-desktop: Remove file:// globbing
selftest/recipetool: Drop globbing SRC_URI test, no longer supported
local.conf.sample: Document memory resident bitbake
bitbake: fetch2: Drop globbing supprt in file:// SRC_URIs
bitbake: server/process: Use sys.executable for bitbake-server
bitbake: process: Avoid bb.utils.timeout
bitbake: utils: Drop broken timeout function
bitbake: server/process: Fix typo in code causing tracebacks
oeqa/selftest: Apply patch to fix cpio build with -fno-common
runqemu: Show an error for conflicting graphics options
lttng: Move platform logic to dedicated inc file
patchelf: upgrade 0.11 -> 0.12
build-appliance/packagegroup-core-base-utils: Replace dhcp-client/dhcp-server with dhcpcd/kea
selftest/prservice: Improve test failure message
iputils: Adapt ${PN}-tftpd package dependency to PACKAGECONFIG
bitbake: process/knotty: Improve early exception handling
bitbake: cooker/cookerdata: Use BBHandledException, not sys.exit()
bitbake: cookerdata: Fix exception raise statements
bitbake: process: Avoid printing binary strings for leftover processes
bitbake: server/process: Ensure logging is flushed
bitbake: server/process: Don't show tracebacks if the lockfile is removed
bitbake: cooker: Ensure parser replacement calls parser final_cleanup
bitbake: cooker: Assign a name to the sync thread to aid debugging
bitbake: server/process: Ensure we don't keep looping if some other server is started
bitbake: server/process: Prefix the log data with pid/time information
bitbake: server/process: Note when commands complete in logs
bitbake: cooker: Ensure parser is cleaned up
runqemu: Add a hook to allow it to renice
bitbake: cooker: Avoid parser deadlocks
bitbake: cooker: Ensure parser worker signal handlers are default
selftest/signing: Ensure build path relocation is safe
oeqa/concurrencytest: Improve builddir path manipulations
bitbake: cooker/command: Fix disconnection handling
bitbake: tinfoil: Ensure sockets don't leak even when exceptions occur
bitbake: tests/fetch: Move away from problematic freedesktop.org urls
bitbake: sphinx: Enhance the sphinx experience/nagivation with:
bitbake: sphinx: theme_override: Use bold for emphasis text
Revert "qemu: always define unknown_lock_type"
Revert "core-image-sato: qemumips use 512 mem"
sphinx: Organize top level docs
sphinx: releases.rst: Add index/links to docs for previous releases
sphinx: boilerplate.rst: Drop versions notes as we have better navigation now
sphinx: boilerplate.rst: Sphinx puts the copyright elsewhere
sphinx: history: Move revision history to its own section
sphinx: manuals: Move boilerplate after toctree
sphinx: Add support for multiple docs version
sphinx: index.rst: Fix links
sphinx: ref-system-requirements: Improve formatting of the notes sections, merging them
sphinx: ref-manual links fixes and many other cleanups to import
sphinx: dev-manual: Various URL, code block and other fixes to imported data
sphinx: sdk-manual: Various URL, code block and other fixes to imported data
sphinx: kernel-dev: Various URL, code block and other fixes to imported data
sphinx: theme_override: Use bold for emphasis text
sphinx: ref-tasks: Add populate_sdk_ext task definition
sphinx: ref-manual/migration: Split each release into its own file
sphinx: overview-manual: Various URL, code block and other fixes to imported data
build-appliance-image: Update to master head revision
Robert Yang (3):
bitbake: cooker.py: Save prioritized BBFILES to BBFILES_PRIORITIZED
bitbake: utils.py: get_file_layer(): Exit the loop when file is matched
bitbake: utils.py: get_file_layer(): Improve performance
Ross Burton (25):
package.bbclass: explode the RPROVIDES so we don't think the versions are provides
elfutils: silence a new QA warning
insane: improve gnu-hash-style warning
gdk-pixbuf: add tests PACKAGECONFIG
debianutils: change SRC_URI to use snapshot.debian.org
insane: only load real files as ELF
autoconf: consolidate SRC_URI
autoconf: consolidate DEPENDS
kea: no need to depend on kea-native
kea: don't use PACKAGECONFIG inappropriately
kea: bump to 1.7.10
help2man: rewrite recipe
local.conf.sample.extended: remove help2man reference
curl: add vendors to CVE_PRODUCT to exclude false positives
harfbuzz: update patch status
harfbuzz: fix a build race around hb-version.h
cmake: whitelist CVE-2016-10642
ncurses: remove config.cache
qemu: fix CVE-2020-14364
cve-update-db-native: remove unused import
cve-update-db-native: add more logging when fetching
cve-update-db-native: use fetch task
alsa-plugins: improve .la removal
sato-screenshot: improve .la removal
buildhistory-diff: use BUILDDIR to know where buildhistory is
Saul Wold (1):
gnupg: uprev 2.2.22 -> 2.2.23
Stacy Gaikovaia (2):
bison: uprev from 3.7.1 to 3.7.2
valgrind: fix memcheck vgtests remove fullpath-after flags
Steve Sakoman (1):
xinput-calibrator: change SRC_URI to branch with libinput support
Sumit Garg (1):
insane: fix gnu-hash-style check
TeohJayShen (1):
oeqa/runtime: add test for matchbox-terminal
Tim Orling (1):
sphinx: toaster-manual: fix vars, links, code blocks
Vijai Kumar K (2):
image_types_wic: Add ASSUME_PROVIDED to WICVARS
wic: misc: Add /bin to the list of searchpaths
Yanfei Xu (1):
kernel-yocto: only replace leading -I in include paths
Yi Zhao (1):
glib-networking: add ptest
Zhixiong Chi (1):
gnutls: CVE-2020-24659
akuster (8):
log4cplus: move meta-oe pkg to core
kea: Move from meta-networking
maintainers.inc: Add me as kea & log4plus maintainer.
dhcpcd: Move from meta-network as OE-Core needs a client
maintainers.inc: Add me as dhcpcd maintainer
dhcp: remove from core
bind: Add 9.16.x
bind: 9.11 remove
hongxu (1):
sysstat: fix installed-vs-shipped QA Issue in systemd
zangrc (4):
libcap:upgrade 2.42 -> 2.43
libcap-ng:upgrade 0.7.10 -> 0.7.11
libgpg-error:upgrade 1.38 -> 1.39
at-spi2-core:upgrade 2.36.0 -> 2.36.1
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: I5542f5eea751a2641342e945725fd687cd74bebe
diff --git a/poky/documentation/toaster-manual/toaster-manual-setup-and-use.rst b/poky/documentation/toaster-manual/toaster-manual-setup-and-use.rst
new file mode 100644
index 0000000..01c0dce
--- /dev/null
+++ b/poky/documentation/toaster-manual/toaster-manual-setup-and-use.rst
@@ -0,0 +1,651 @@
+.. SPDX-License-Identifier: CC-BY-2.0-UK
+.. Set default pygment highlighting to 'shell' for this document
+.. highlight:: shell
+
+****************************
+Setting Up and Using Toaster
+****************************
+
+Starting Toaster for Local Development
+======================================
+
+Once you have set up the Yocto Project and installed the Toaster system
+dependencies as described in the ":ref:`toaster-manual/toaster-manual-start:Preparing to Use
+Toaster`" chapter, you are ready to start
+Toaster.
+
+Navigate to the root of your
+:term:`Source Directory` (e.g. ``poky``)::
+
+ $ cd poky
+
+Once in that directory, source the build environment script::
+
+ $ source oe-init-build-env
+
+Next, from the build directory (e.g.
+``poky/build``), start Toaster using this command::
+
+ $ source toaster start
+
+You can now run your builds from the command line, or with Toaster
+as explained in section
+":ref:`toaster-manual/toaster-manual-setup-and-use:using the toaster web interface`".
+
+To access the Toaster web interface, open your favorite browser and
+enter the following::
+
+ http://127.0.0.1:8000
+
+Setting a Different Port
+========================
+
+By default, Toaster starts on port 8000. You can use the ``WEBPORT``
+parameter to set a different port. For example, the following command
+sets the port to "8400"::
+
+ $ source toaster start webport=8400
+
+Setting Up Toaster Without a Web Server
+=======================================
+
+You can start a Toaster environment without starting its web server.
+This is useful for the following:
+
+- Capturing a command-line build's statistics into the Toaster database
+ for examination later.
+
+- Capturing a command-line build's statistics when the Toaster server
+ is already running.
+
+- Having one instance of the Toaster web server track and capture
+ multiple command-line builds, where each build is started in its own
+ "noweb" Toaster environment.
+
+The following commands show how to start a Toaster environment without
+starting its web server, perform BitBake operations, and then shut down
+the Toaster environment. Once the build is complete, you can close the
+Toaster environment. Before closing the environment, however, you should
+allow a few minutes to ensure the complete transfer of its BitBake build
+statistics to the Toaster database. If you have a separate Toaster web
+server instance running, you can watch this command-line build's
+progress and examine the results as soon as they are posted::
+
+ $ source toaster start noweb
+ $ bitbake target
+ $ source toaster stop
+
+Setting Up Toaster Without a Build Server
+=========================================
+
+You can start a Toaster environment with the "New Projects" feature
+disabled. Doing so is useful for the following:
+
+- Sharing your build results over the web server while blocking others
+ from starting builds on your host.
+
+- Allowing only local command-line builds to be captured into the
+ Toaster database.
+
+Use the following command to set up Toaster without a build server::
+
+ $ source toaster start nobuild webport=port
+
+Setting up External Access
+==========================
+
+By default, Toaster binds to the loop back address (i.e. ``localhost``),
+which does not allow access from external hosts. To allow external
+access, use the ``WEBPORT`` parameter to open an address that connects
+to the network, specifically the IP address that your NIC uses to
+connect to the network. You can also bind to all IP addresses the
+computer supports by using the shortcut "0.0.0.0:port".
+
+The following example binds to all IP addresses on the host::
+
+ $ source toaster start webport=0.0.0.0:8400
+
+This example binds to a specific IP address on the host's NIC::
+
+ $ source toaster start webport=192.168.1.1:8400
+
+The Directory for Cloning Layers
+================================
+
+Toaster creates a ``_toaster_clones`` directory inside your Source
+Directory (i.e. ``poky``) to clone any layers needed for your builds.
+
+Alternatively, if you would like all of your Toaster related files and
+directories to be in a particular location other than the default, you
+can set the ``TOASTER_DIR`` environment variable, which takes precedence
+over your current working directory. Setting this environment variable
+causes Toaster to create and use ``$TOASTER_DIR./_toaster_clones``.
+
+.. _toaster-the-build-directory:
+
+The Build Directory
+===================
+
+Toaster creates a build directory within your Source Directory (e.g.
+``poky``) to execute the builds.
+
+Alternatively, if you would like all of your Toaster related files and
+directories to be in a particular location, you can set the
+``TOASTER_DIR`` environment variable, which takes precedence over your
+current working directory. Setting this environment variable causes
+Toaster to use ``$TOASTER_DIR/build`` as the build directory.
+
+.. _toaster-creating-a-django-super-user:
+
+Creating a Django Superuser
+===========================
+
+Toaster is built on the `Django
+framework <https://www.djangoproject.com/>`__. Django provides an
+administration interface you can use to edit Toaster configuration
+parameters.
+
+To access the Django administration interface, you must create a
+superuser by following these steps:
+
+#. If you used ``pip3``, which is recommended, to set up the Toaster
+ system dependencies, you need be sure the local user path is in your
+ ``PATH`` list. To append the pip3 local user path, use the following
+ command::
+
+ $ export PATH=$PATH:$HOME/.local/bin
+
+#. From the directory containing the Toaster database, which by default
+ is the :term:`Build Directory`,
+ invoke the ``createsuperuser`` command from ``manage.py``::
+
+ $ cd ~/poky/build
+ $ ../bitbake/lib/toaster/manage.py createsuperuser
+
+#. Django prompts you for the username, which you need to provide.
+
+#. Django prompts you for an email address, which is optional.
+
+#. Django prompts you for a password, which you must provide.
+
+#. Django prompts you to re-enter your password for verification.
+
+After completing these steps, the following confirmation message
+appears::
+
+ Superuser created successfully.
+
+Creating a superuser allows you to access the Django administration
+interface through a browser. The URL for this interface is the same as
+the URL used for the Toaster instance with "/admin" on the end. For
+example, if you are running Toaster locally, use the following URL::
+
+ http://127.0.0.1:8000/admin
+
+You can use the Django administration interface to set Toaster configuration
+parameters such as the build directory, layer sources, default variable
+values, and BitBake versions.
+
+.. _toaster-setting-up-a-production-instance-of-toaster:
+
+Setting Up a Production Instance of Toaster
+===========================================
+
+You can use a production instance of Toaster to share the Toaster
+instance with remote users, multiple users, or both. The production
+instance is also the setup that can handle heavier loads on the web
+service. Use the instructions in the following sections to set up
+Toaster to run builds through the Toaster web interface.
+
+.. _toaster-production-instance-requirements:
+
+Requirements
+------------
+
+Be sure you meet the following requirements:
+
+.. note::
+
+ You must comply with all Apache, ``mod-wsgi``, and Mysql requirements.
+
+- Have all the build requirements as described in the ":ref:`toaster-manual/toaster-manual-start:Preparing to
+ Use Toaster`" chapter.
+
+- Have an Apache webserver.
+
+- Have ``mod-wsgi`` for the Apache webserver.
+
+- Use the Mysql database server.
+
+- If you are using Ubuntu, run the following::
+
+ $ sudo apt-get install apache2 libapache2-mod-wsgi-py3 mysql-server python3-pip libmysqlclient-dev
+
+- If you are using Fedora or a RedHat distribution, run the
+ following::
+
+ $ sudo dnf install httpd python3-mod_wsgi python3-pip mariadb-server mariadb-devel python3-devel
+
+- If you are using openSUSE, run the following::
+
+ $ sudo zypper install apache2 apache2-mod_wsgi-python3 python3-pip mariadb mariadb-client python3-devel
+
+.. _toaster-installation-steps:
+
+Installation
+------------
+
+Perform the following steps to install Toaster:
+
+#. Create toaster user and set its home directory to
+ ``/var/www/toaster``::
+
+ $ sudo /usr/sbin/useradd toaster -md /var/www/toaster -s /bin/false
+ $ sudo su - toaster -s /bin/bash
+
+#. Checkout a copy of ``poky`` into the web server directory. You will
+ be using ``/var/www/toaster``::
+
+ $ git clone git://git.yoctoproject.org/poky
+ $ git checkout &DISTRO_NAME_NO_CAP;
+
+#. Install Toaster dependencies using the --user flag which keeps the
+ Python packages isolated from your system-provided packages::
+
+ $ cd /var/www/toaster/
+ $ pip3 install --user -r ./poky/bitbake/toaster-requirements.txt
+ $ pip3 install --user mysqlclient
+
+ .. note::
+
+ Isolating these packages is not required but is recommended.
+ Alternatively, you can use your operating system's package
+ manager to install the packages.
+
+#. Configure Toaster by editing
+ ``/var/www/toaster/poky/bitbake/lib/toaster/toastermain/settings.py``
+ as follows:
+
+ - Edit the
+ `DATABASES <https://docs.djangoproject.com/en/2.2/ref/settings/#databases>`__
+ settings:
+
+ .. code-block:: python
+
+ DATABASES = {
+ 'default': {
+ 'ENGINE': 'django.db.backends.mysql',
+ 'NAME': 'toaster_data',
+ 'USER': 'toaster',
+ 'PASSWORD': 'yourpasswordhere',
+ 'HOST': 'localhost',
+ 'PORT': '3306',
+ }
+ }
+
+ - Edit the
+ `SECRET_KEY <https://docs.djangoproject.com/en/2.2/ref/settings/#std:setting-SECRET_KEY>`__:
+
+ .. code-block:: python
+
+ SECRET_KEY = 'your_secret_key'
+
+ - Edit the
+ `STATIC_ROOT <https://docs.djangoproject.com/en/2.2/ref/settings/#std:setting-STATIC_ROOT>`__:
+
+ .. code-block:: python
+
+ STATIC_ROOT = '/var/www/toaster/static_files/'
+
+#. Add the database and user to the ``mysql`` server defined earlier::
+
+ $ mysql -u root -p
+ mysql> CREATE DATABASE toaster_data;
+ mysql> CREATE USER 'toaster'@'localhost' identified by 'yourpasswordhere';
+ mysql> GRANT all on toaster_data.\* to 'toaster'@'localhost';
+ mysql> quit
+
+#. Get Toaster to create the database schema, default data, and gather
+ the statically-served files::
+
+ $ cd /var/www/toaster/poky/
+ $ ./bitbake/lib/toaster/manage.py migrate
+ $ TOASTER_DIR=`pwd\` TEMPLATECONF='poky' \
+ ./bitbake/lib/toaster/manage.py checksettings
+ $ ./bitbake/lib/toaster/manage.py collectstatic
+
+
+ In the previous
+ example, from the ``poky`` directory, the ``migrate`` command
+ ensures the database schema changes have propagated correctly (i.e.
+ migrations). The next line sets the Toaster root directory
+ ``TOASTER_DIR`` and the location of the Toaster configuration file
+ ``TOASTER_CONF``, which is relative to ``TOASTER_DIR``. The
+ ``TEMPLATECONF`` value reflects the contents of
+ ``poky/.templateconf``, and by default, should include the string
+ "poky". For more information on the Toaster configuration file, see
+ the ":ref:`toaster-manual/toaster-manual-reference:Configuring Toaster`" section.
+
+ This line also runs the ``checksettings`` command, which configures
+ the location of the Toaster :term:`Build Directory`.
+ The Toaster
+ root directory ``TOASTER_DIR`` determines where the Toaster build
+ directory is created on the file system. In the example above,
+ ``TOASTER_DIR`` is set as follows::
+
+ /var/www/toaster/poky
+
+
+ This setting causes the Toaster build directory to be::
+
+ /var/www/toaster/poky/build
+
+ Finally, the ``collectstatic`` command is a Django framework command
+ that collects all the statically served files into a designated
+ directory to be served up by the Apache web server as defined by
+ ``STATIC_ROOT``.
+
+#. Test and/or use the Mysql integration with Toaster's Django web
+ server. At this point, you can start up the normal Toaster Django
+ web server with the Toaster database in Mysql. You can use this web
+ server to confirm that the database migration and data population
+ from the Layer Index is complete.
+
+ To start the default Toaster Django web server with the Toaster
+ database now in Mysql, use the standard start commands::
+
+ $ source oe-init-build-env
+ $ source toaster start
+
+ Additionally, if Django is sufficient for your requirements, you can use
+ it for your release system and migrate later to Apache as your
+ requirements change.
+
+#. Add an Apache configuration file for Toaster to your Apache web
+ server's configuration directory. If you are using Ubuntu or Debian,
+ put the file here::
+
+ /etc/apache2/conf-available/toaster.conf
+
+
+ If you are using Fedora or RedHat, put it here::
+
+ /etc/httpd/conf.d/toaster.conf
+
+ If you are using OpenSUSE, put it here::
+
+ /etc/apache2/conf.d/toaster.conf
+
+ Following is a sample Apache configuration for Toaster you can follow:
+
+ .. code-block:: apache
+
+ Alias /static /var/www/toaster/static_files
+ <Directory /var/www/toaster/static_files>
+ <IfModule mod_access_compat.c>
+ Order allow,deny
+ Allow from all
+ </IfModule>
+ <IfModule !mod_access_compat.c>
+ Require all granted
+ </IfModule>
+ </Directory>
+
+ <Directory /var/www/toaster/poky/bitbake/lib/toaster/toastermain>
+ <Files "wsgi.py">
+ Require all granted
+ </Files>
+ </Directory>
+
+ WSGIDaemonProcess toaster_wsgi python-path=/var/www/toaster/poky/bitbake/lib/toaster:/var/www/toaster/.local/lib/python3.4/site-packages
+ WSGIScriptAlias / "/var/www/toaster/poky/bitbake/lib/toaster/toastermain/wsgi.py"
+ <Location />
+ WSGIProcessGroup toaster_wsgi
+ </Location>
+
+
+ If you are using Ubuntu or Debian, you will need to enable the config and
+ module for Apache::
+
+ $ sudo a2enmod wsgi
+ $ sudo a2enconf toaster
+ $ chmod +x bitbake/lib/toaster/toastermain/wsgi.py
+
+ Finally, restart Apache to make sure all new configuration is loaded. For Ubuntu,
+ Debian, and OpenSUSE use::
+
+ $ sudo service apache2 restart
+
+ For Fedora and RedHat use::
+
+ $ sudo service httpd restart
+
+#. Prepare the systemd service to run Toaster builds. Here is a sample
+ configuration file for the service:
+
+ .. code-block:: ini
+
+ [Unit]
+ Description=Toaster runbuilds
+
+ [Service]
+ Type=forking User=toaster
+ ExecStart=/usr/bin/screen -d -m -S runbuilds /var/www/toaster/poky/bitbake/lib/toaster/runbuilds-service.sh start
+ ExecStop=/usr/bin/screen -S runbuilds -X quit
+ WorkingDirectory=/var/www/toaster/poky
+
+ [Install]
+ WantedBy=multi-user.target
+
+
+ Prepare the ``runbuilds-service.sh`` script that you need to place in the
+ ``/var/www/toaster/poky/bitbake/lib/toaster/`` directory by setting
+ up executable permissions::
+
+ #!/bin/bash
+
+ #export http_proxy=http://proxy.host.com:8080
+ #export https_proxy=http://proxy.host.com:8080
+ #export GIT_PROXY_COMMAND=$HOME/bin/gitproxy
+ cd ~/poky/
+ source ./oe-init-build-env build
+ source ../bitbake/bin/toaster $1 noweb
+ [ "$1" == 'start' ] && /bin/bash
+
+#. Run the service::
+
+ $ sudo service runbuilds start
+
+ Since the service is running in a detached screen session, you can
+ attach to it using this command::
+
+ $ sudo su - toaster
+ $ screen -rS runbuilds
+
+ You can detach from the service again using "Ctrl-a" followed by "d" key
+ combination.
+
+You can now open up a browser and start using Toaster.
+
+Using the Toaster Web Interface
+===============================
+
+The Toaster web interface allows you to do the following:
+
+- Browse published layers in the `OpenEmbedded Layer
+ Index <http://layers.openembedded.org>`__ that are available for your
+ selected version of the build system.
+
+- Import your own layers for building.
+
+- Add and remove layers from your configuration.
+
+- Set configuration variables.
+
+- Select a target or multiple targets to build.
+
+- Start your builds.
+
+- See what was built (recipes and packages) and what packages were
+ installed into your final image.
+
+- Browse the directory structure of your image.
+
+- See the value of all variables in your build configuration, and which
+ files set each value.
+
+- Examine error, warning and trace messages to aid in debugging.
+
+- See information about the BitBake tasks executed and reused during
+ your build, including those that used shared state.
+
+- See dependency relationships between recipes, packages and tasks.
+
+- See performance information such as build time, task time, CPU usage,
+ and disk I/O.
+
+.. _web-interface-videos:
+
+Toaster Web Interface Videos
+----------------------------
+
+Following are several videos that show how to use the Toaster GUI:
+
+- *Build Configuration:* This
+ `video <https://www.youtube.com/watch?v=qYgDZ8YzV6w>`__ overviews and
+ demonstrates build configuration for Toaster.
+
+- *Build Custom Layers:* This
+ `video <https://www.youtube.com/watch?v=QJzaE_XjX5c>`__ shows you how
+ to build custom layers that are used with Toaster.
+
+- *Toaster Homepage and Table Controls:* This
+ `video <https://www.youtube.com/watch?v=QEARDnrR1Xw>`__ goes over the
+ Toaster entry page, and provides an overview of the data manipulation
+ capabilities of Toaster, which include search, sorting and filtering
+ by different criteria.
+
+- *Build Dashboard:* This
+ `video <https://www.youtube.com/watch?v=KKqHYcnp2gE>`__ shows you the
+ build dashboard, a page providing an overview of the information
+ available for a selected build.
+
+- *Image Information:* This
+ `video <https://www.youtube.com/watch?v=XqYGFsmA0Rw>`__ walks through
+ the information Toaster provides about images: packages installed and
+ root file system.
+
+- *Configuration:* This
+ `video <https://www.youtube.com/watch?v=UW-j-T2TzIg>`__ provides
+ Toaster build configuration information.
+
+- *Tasks:* This `video <https://www.youtube.com/watch?v=D4-9vGSxQtw>`__
+ shows the information Toaster provides about the tasks run by the
+ build system.
+
+- *Recipes and Packages Built:* This
+ `video <https://www.youtube.com/watch?v=x-6dx4huNnw>`__ shows the
+ information Toaster provides about recipes and packages built.
+
+- *Performance Data:* This
+ `video <https://www.youtube.com/watch?v=qWGMrJoqusQ>`__ shows the
+ build performance data provided by Toaster.
+
+.. _a-note-on-the-local-yocto-project-release:
+
+Additional Information About the Local Yocto Project Release
+------------------------------------------------------------
+
+This section only applies if you have set up Toaster for local
+development, as explained in the
+":ref:`toaster-manual/toaster-manual-setup-and-use:starting toaster for local development`"
+section.
+
+When you create a project in Toaster, you will be asked to provide a
+name and to select a Yocto Project release. One of the release options
+you will find is called "Local Yocto Project".
+
+.. image:: figures/new-project.png
+ :align: center
+ :scale: 75%
+
+When you select the "Local Yocto Project" release, Toaster will run your
+builds using the local Yocto Project clone you have in your computer:
+the same clone you are using to run Toaster. Unless you manually update
+this clone, your builds will always use the same Git revision.
+
+If you select any of the other release options, Toaster will fetch the
+tip of your selected release from the upstream `Yocto Project
+repository <https://git.yoctoproject.org>`__ every time you run a build.
+Fetching this tip effectively means that if your selected release is
+updated upstream, the Git revision you are using for your builds will
+change. If you are doing development locally, you might not want this
+change to happen. In that case, the "Local Yocto Project" release might
+be the right choice.
+
+However, the "Local Yocto Project" release will not provide you with any
+compatible layers, other than the three core layers that come with the
+Yocto Project:
+
+- `openembedded-core <http://layers.openembedded.org/layerindex/branch/master/layer/openembedded-core/>`__
+
+- `meta-poky <http://layers.openembedded.org/layerindex/branch/master/layer/meta-poky/>`__
+
+- `meta-yocto-bsp <http://layers.openembedded.org/layerindex/branch/master/layer/meta-yocto-bsp/>`__
+
+.. image:: figures/compatible-layers.png
+ :align: center
+ :scale: 75%
+
+If you want to build any other layers, you will need to manually import
+them into your Toaster project, using the "Import layer" page.
+
+.. image:: figures/import-layer.png
+ :align: center
+ :scale: 75%
+
+.. _toaster-web-interface-preferred-version:
+
+Building a Specific Recipe Given Multiple Versions
+--------------------------------------------------
+
+Occasionally, a layer might provide more than one version of the same
+recipe. For example, the ``openembedded-core`` layer provides two
+versions of the ``bash`` recipe (i.e. 3.2.48 and 4.3.30-r0) and two
+versions of the ``which`` recipe (i.e. 2.21 and 2.18). The following
+figure shows this exact scenario:
+
+.. image:: figures/bash-oecore.png
+ :align: center
+ :scale: 75%
+
+By default, the OpenEmbedded build system builds one of the two recipes.
+For the ``bash`` case, version 4.3.30-r0 is built by default.
+Unfortunately, Toaster as it exists, is not able to override the default
+recipe version. If you would like to build bash 3.2.48, you need to set
+the
+:term:`PREFERRED_VERSION`
+variable. You can do so from Toaster, using the "Add variable" form,
+which is available in the "BitBake variables" page of the project
+configuration section as shown in the following screen:
+
+.. image:: figures/add-variable.png
+ :align: center
+ :scale: 75%
+
+To specify ``bash`` 3.2.48 as the version to build, enter
+"PREFERRED_VERSION_bash" in the "Variable" field, and "3.2.48" in the
+"Value" field. Next, click the "Add variable" button:
+
+.. image:: figures/set-variable.png
+ :align: center
+ :scale: 75%
+
+After clicking the "Add variable" button, the settings for
+``PREFERRED_VERSION`` are added to the bottom of the BitBake variables
+list. With these settings, the OpenEmbedded build system builds the
+desired version of the recipe rather than the default version:
+
+.. image:: figures/variable-added.png
+ :align: center
+ :scale: 75%