meta-aspeed: socsec: Bump to v0.2.1

Andrew Jeffery (10):
      resocsec: Style cleanup via autopep8
      resocsec: Use env(1) for shebang
      resocsec: Consistently use single-quotes for strings
      resocsec: Make signing helper options mutually exclusive
      resocsec: Add a helper for frobbing the RSA algorithm slug
      resocsec: Attempt at ergonomic Chain-of-Trust options
      resocsec: Rename secure-bootloader to secure-bootstrap-image
      resocsec: Add secure-chained-images subcommand
      resocsec: Add verify-secure-image subcommand
      setup: Install resocsec

Johnny Huang (43):
      Merge branch 'develop' into resocsec
      Merge pull request #7 from amboar/resocsec
      resocsec: fix typo
      socsec: add support for ast2605
      socsec: remove hexdump module dependcy
      schema: update otp schema
      otptool: fix making strap region
      otptool: fix schema typo
      readme: add descripton of verify
      strap: fix "VGA class code" info
      otptool: fix schema key
      otptool: fix OTPCFG0[14] description for 2600A1
      socsec: move hexdump to global
      otptool: add 'print' function for otptool
      socsec: fix public key exponent
      otp_info: fix config typo
      otptool: add AST2600A3 support
      socsec: add rsa pss padding for AST1030A1
      socsec: fix cot public key exponent
      socsec: Add new test item
      socsec: Add 2600A3 test item
      Merge branch 'develop'
      socsec: add mode2v2aes2 pub and priv test
      socsec: add ecdsa mode for AST1030A1
      socsec: Add ecdsa test item
      otp_info: remove ast1030 from otp_info
      otp_info: update schema
      socsec: update revision id
      otptool: update schema for manifest id config
      socsec: fix revision id range.
      socsec: fix f-strings giving SyntaxError
      socsec: deprecate the CoT sing function
      otptool: fix bitarray AttributeError
      readme: update readme and fix typo
      otp_info: update otp info
      tool: add info2sample tool
      otp_info: Add AST2600A3 otp config
      otp_info: update and add OTPSTRAP Reserved info
      otptool: fix otptool print
      otptool: make image also generate OTPCFG1
      tool: add script to generate otp config schema
      setup: update version number
      Merge branch 'develop'

Change-Id: Ie78aa2c0ddb18d823e1055a67c76967aa9762285
Signed-off-by: Andrew Jeffery <>
1 file changed
tree: 0320e09a496d4ca0d8decdcbedab26596ea45084
  1. .github/
  2. meta-alibaba/
  3. meta-amd/
  4. meta-ampere/
  5. meta-arm/
  6. meta-aspeed/
  7. meta-asrock/
  8. meta-bytedance/
  9. meta-evb/
  10. meta-facebook/
  11. meta-fii/
  12. meta-google/
  13. meta-hpe/
  14. meta-hxt/
  15. meta-ibm/
  16. meta-ingrasys/
  17. meta-inspur/
  18. meta-intel-openbmc/
  19. meta-inventec/
  20. meta-lenovo/
  21. meta-microsoft/
  22. meta-nuvoton/
  23. meta-openembedded/
  24. meta-openpower/
  25. meta-phosphor/
  26. meta-portwell/
  27. meta-qualcomm/
  28. meta-quanta/
  29. meta-raspberrypi/
  30. meta-security/
  31. meta-supermicro/
  32. meta-wistron/
  33. meta-x86/
  34. meta-xilinx/
  35. meta-yadro/
  36. poky/
  37. .gitignore
  38. .gitreview
  39. .templateconf
  41. openbmc-env
  42. OWNERS
  44. setup


Build Status

OpenBMC is a Linux distribution for management controllers used in devices such as servers, top of rack switches or RAID appliances. It uses Yocto, OpenEmbedded, systemd, and D-Bus to allow easy customization for your platform.

Setting up your OpenBMC project

1) Prerequisite

  • Ubuntu 14.04
sudo apt-get install -y git build-essential libsdl1.2-dev texinfo gawk chrpath diffstat
  • Fedora 28
sudo dnf install -y git patch diffstat texinfo chrpath SDL-devel bitbake \
    rpcgen perl-Thread-Queue perl-bignum perl-Crypt-OpenSSL-Bignum
sudo dnf groupinstall "C Development Tools and Libraries"

2) Download the source

git clone
cd openbmc

3) Target your hardware

Any build requires an environment set up according to your hardware target. There is a special script in the root of this repository that can be used to configure the environment as needed. The script is called setup and takes the name of your hardware target as an argument.

The script needs to be sourced while in the top directory of the OpenBMC repository clone, and, if run without arguments, will display the list of supported hardware targets, see the following example:

$ . setup <machine> [build_dir]
Target machine must be specified. Use one of:

centriq2400-rep         f0b                     fp5280g2
gsj                     hr630                   hr855xg2
lanyang                 mihawk                  msn
neptune                 nicole                  olympus
olympus-nuvoton         on5263m5                p10bmc
palmetto                qemuarm                 quanta-q71l
romulus                 s2600wf                 stardragon4800-rep2
swift                   tiogapass               vesnin
witherspoon             witherspoon-tacoma      yosemitev2

Once you know the target (e.g. romulus), source the setup script as follows:

. setup romulus

For evb-ast2500, please use the below command to specify the machine config, because the machine in meta-aspeed layer is in a BSP layer and does not build the openbmc image.

TEMPLATECONF=meta-evb/meta-evb-aspeed/meta-evb-ast2500/conf . openbmc-env

4) Build

bitbake obmc-phosphor-image

Additional details can be found in the docs repository.

OpenBMC Development

The OpenBMC community maintains a set of tutorials new users can go through to get up to speed on OpenBMC development out here

Build Validation and Testing

Commits submitted by members of the OpenBMC GitHub community are compiled and tested via our Jenkins server. Commits are run through two levels of testing. At the repository level the makefile make check directive is run. At the system level, the commit is built into a firmware image and run with an arm-softmmu QEMU model against a barrage of CI tests.

Commits submitted by non-members do not automatically proceed through CI testing. After visual inspection of the commit, a CI run can be manually performed by the reviewer.

Automated testing against the QEMU model along with supported systems are performed. The OpenBMC project uses the Robot Framework for all automation. Our complete test repository can be found here.

Submitting Patches

Support of additional hardware and software packages is always welcome. Please follow the contributing guidelines when making a submission. It is expected that contributions contain test cases.

Bug Reporting

Issues are managed on GitHub. It is recommended you search through the issues before opening a new one.


First, please do a search on the internet. There's a good chance your question has already been asked.

For general questions, please use the openbmc tag on Stack Overflow. Please review the discussion on Stack Overflow licensing before posting any code.

For technical discussions, please see contact info below for Discord and mailing list information. Please don't file an issue to ask a question. You'll get faster results by using the mailing list or Discord.

Features of OpenBMC

Feature List

  • Host management: Power, Cooling, LEDs, Inventory, Events, Watchdog
  • Full IPMI 2.0 Compliance with DCMI
  • Code Update Support for multiple BMC/BIOS images
  • Web-based user interface
  • REST interfaces
  • D-Bus based interfaces
  • SSH based SOL
  • Remote KVM
  • Hardware Simulation
  • Automated Testing
  • User management
  • Virtual media

Features In Progress

  • OpenCompute Redfish Compliance
  • Verified Boot

Features Requested but need help

  • OpenBMC performance monitoring

Finding out more

Dive deeper into OpenBMC by opening the docs repository.

Technical Steering Committee

The Technical Steering Committee (TSC) guides the project. Members are:

  • Brad Bishop (chair), IBM
  • Nancy Yuen, Google
  • Sai Dasari, Facebook
  • James Mihm, Intel
  • Sagar Dharia, Microsoft
  • Supreeth Venkatesh, Arm