tree e0cc71c27cc38acb0a5b0376adc28bb5f12d0ca0
parent 60e37ef4f8fa0977267fc60e96328da730c9dce8
author Joel Stanley <joel@jms.id.au> 1621902715 +0930
committer Joel Stanley <joel@jms.id.au> 1621950610 +0000

u-boot-aspeed: Move to SDK v00.04.00

This rebases on the latest SDK release. Notably this release includes
support for the A3 and disables debug backdoors in line with the
defaults in the A3 silicon.

Changes kept downstream from ASPEED's SDK in the OpenBMC branch:

Eddie James (1):
      ARM: dts: Aspeed: Tacoma and Rainier: Add eMMC nodes and parameters

Joel Stanley (15):
      board: ast2600: Disable eSPI early init by default
      dts: ast2600-evb: Enable FSI masters
      tools: Add script for generating recovery image
      configs: Add OpenBMC spl defconfig for AST2600 boards
      clk: ast2600: Add divisor settings for 100MHz PLL
      ram: ast2600: Enable device tree based DDR config
      ast2600: tacoma: Run DDR at 1333
      ast2600: Allow selection of SPL boot devices
      ast2600: Modify SPL SRAM layout
      crypto: Add driver for Aspeed HACE
      ast2600: Enable HACE probing in SPL
      ast2600: Add HACE to device tree
      ast2600: spl: Add ASPEED_LOADERS option
      ast2600: spl: Support common boot loader features
      config: ast2600: Add config for SPL MMC boot with FIT signature verification

Changes in the ASPEED SDK when moving from v00.03.03 include the branch
of fixes that were backported for FIT support, plus the following
changes from the ASPEED team:

Bing-Hua Wang (3):
      configs: evb-ast2500-spl_defconfig: Use platform.S DDR init
      ast2500: spl: Skip SPI timing calibration
      ast2500: Fix VRAM size detection

Chia-Wei Wang (2):
      ast2600: Disable backdoor to align A3 design
      ast2600: Enable UART Debug based on FWSPIMISO

Chia-Wei, Wang (4):
      board: ast2600: Add eSPI early init sequence
      board: ast2600-intel: Add Intel EGS CRB support
      aspeed: ast2600: Fix incorrect chip revision ID
      board: ast2600: Enable eSPI early init by default

Chin-Ting Kuo (4):
      sdhci: ast2600: HS200 support porting
      mmc: Enable SDMA feature when boot from eMMC
      uart: Fix UART1 route problem on A3
      spi-nor: Porting MT25Q02G flash part

Dylan Hung (18):
      cmd:aspeed: fix missing setting for the tx single packet
      cmd:aspeed: change broadcom id matching
      cmd:aspeed: add support of broadcom 54210/54213 test
      cmd:aspeed: refactor phy internal loopback
      cmd:aspeed: fix typo
      cmd:aspeed: remove redundant debug print
      cmd:aspeed: skip deselect package for I350 IOP issue
      cmd:aspeed: add NCSI_VERBOSE_TEST (default off)
      cmd:aspeed: add 100ms for phy ready
      cmd:aspeed: bug fixed of the length decoding of the dramtest
      arm:dts: revise ast2600 mac1/2 rgmii delay setting
      net:phy: add phy-mode support on broadcom 5461 series
      cmd:aspeed: add phy tx/rx delay control arguments
      cmd:aspeed: add bcm54615, rtl8211f and marvell88e15 delay setting
      cmd:aspeed: restore default page
      ram:aspeed: revise coding style
      ram:aspeed: refactor coding style
      arm:dts: revise rgmii tx/rx delay

Fugang Duan (1):
      net: phy: realtek: add rx delay support for RTL8211F

Jamin Lin (1):
      Add evb-ast2600-obmc-emmc-cot_defconfig config to support AST2600 emmc secure boot for OpenBMC

Johnny Huang (6):
      otp: fix a1 program issue
      otp: fix otp cmd stuck
      otp: update version number to 1.0.2
      otp: add AST2600A3
      secure boot: fix public key exponent
      otp: update print otp image

Ryan Chen (3):
      AST2600:platform.S for AST2600A3 fix for reset. it will apply for AST2600A1/A2/A3
      ast2600:ddr: fix memory bandwidth issue
      sdram : ast2600

Troy Lee (2):
      config: ast2600: support OpenBMC boot from eMMC image
      config: ast2600-evb for openbmc boot command update

chin-ting_kuo (1):
      Revert "mmc: Enable SDMA feature when boot from eMMC"

The previous version of v2019.04-aspeed-openbmc is kept in the branch
archive/v2019.04-aspeed-openbmc-3.

Change-Id: Ie492bdbfaec32c3e3e0caf8d4fa1806fcd1febec
Signed-off-by: Joel Stanley <joel@jms.id.au>