Gitiles
Code Review Sign In
gerrit.openbmc.org / openbmc / openbmc / f1ade61b5994799a4cffca0c124b2ed36e640cbf
commitf1ade61b5994799a4cffca0c124b2ed36e640cbf[log] [tgz]
authorJoel Stanley <joel@jms.id.au>Tue Aug 28 11:09:10 2018 -0700
committerBrad Bishop <bradleyb@fuzziesquirrel.com>Tue Sep 04 15:39:10 2018 -0400
treea3b8ffe2a1d14071fa9131433e9cbfada5260ebe
parentcb7651db75f7d9614e18de0260fc4c96e3a6cefa [diff]
linux: Move to 4.18 based tree

This rebases the OpenBMC kernel tree on a 4.18 base. There are 85
patches backported from 4.19-rc1, and the following 39 out of tree
patches:

Alexander Amelkin (1):
      mtd: spi-nor: fix options for mx66l51235f

Andrew Jeffery (8):
      ARM: dts: aspeed: witherspoon: Update max31785 node
      dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation
      pmbus (max31785): Add support for devicetree configuration
      pmbus (core): One-shot retries for failure to set page
      pmbus (core): Use driver callbacks in pmbus_get_fan_rate()
      pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers
      soc: aspeed: Miscellaneous control interfaces
      ARM: dts: aspeed-g5: Expose VGA and SuperIO scratch registers

Benjamin Herrenschmidt (4):
      ARM: dts: aspeed: Romulus system can use coprocessor for FSI
      ARM: dts: aspeed: Palmetto system can use coprocessor for FSI
      ARM: dts: aspeed: Add Power8 CFAM description for use by Palmetto
      ARM: dts: aspeed: Add Power9 CFAM description

Brad Bishop (1):
      ARM: configs: Remove atags from Aspeed G4 config

Christopher Bostic (1):
      iio: dps310: Temperature measurement errata

Cyril Bur (1):
      misc: Add ASPEED mbox driver

Cédric Le Goater (6):
      mtd: spi-nor: aspeed: use command mode for reads
      mtd: spi-nor: aspeed: add support for SPI dual IO read mode
      mtd: spi-nor: aspeed: link controller with the ahb clock
      mtd: spi-nor: aspeed: optimize read mode
      mtd: spi-nor: aspeed: limit the maximum SPI frequency
      ARM: dts: aspeed: Add "spi-max-frequency" property

Edward A. James (2):
      drivers/fsi: Add On-Chip Controller (OCC) driver
      hwmon: Add On-Chip Controller (OCC) hwmon driver

Joel Stanley (15):
      ARM: dts: aspeed-palmetto: Add LPC control node
      ARM: dts: aspeed-palmetto: Add i2c OCC hwmon node
      ARM: dts: aspeed-ast2500: Update flash layout
      ARM: dts: aspeed: Add LPC mailbox node
      ARM: dts: aspeed: Enable mbox
      iio: Add driver for Infineon DPS310
      ARM: dts: aspeed-g4: Expose SuperIO scratch registers
      ARM: dts: aspeed-g5: Add resets and clocks to GFX node
      ARM: dts: aspeed: Enable the GFX IP
      ARM: dts: aspeed: Enable VHUB on Romulus
      drm: Add ASPEED GFX driver
      drm: aspeed: Debugfs interface for GFX registers
      dt-bindings: gpu: Add ASPEED GFX bindings document
      ARM: config: aspeed: Add out of tree drivers
      ARM: dts: Add OCC description to Power9 dtsi

(From meta-aspeed rev: 2f1187b1bff8d52ddd93f2c5b598eec7ddc9f4f6)

Change-Id: I4035abcdcfa9a083599e27661fed5351fc6532fd
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
3 files changed
tree: a3b8ffe2a1d14071fa9131433e9cbfada5260ebe
  1. meta-arm/
  2. meta-aspeed/
  3. meta-evb/
  4. meta-ibm/
  5. meta-ingrasys/
  6. meta-intel/
  7. meta-inventec/
  8. meta-mellanox/
  9. meta-nuvoton/
  10. meta-openembedded/
  11. meta-openpower/
  12. meta-phosphor/
  13. meta-portwell/
  14. meta-qualcomm/
  15. meta-quanta/
  16. meta-raspberrypi/
  17. meta-security/
  18. meta-x86/
  19. poky/
  20. bitbake ⇨ poky/bitbake/
  21. LICENSE ⇨ poky/LICENSE
  22. meta ⇨ poky/meta
  23. meta-poky ⇨ poky/meta-poky/
  24. oe-init-build-env ⇨ poky/oe-init-build-env
  25. scripts ⇨ poky/scripts/
  26. .gitignore
  27. .gitreview
  28. .templateconf
  29. MAINTAINERS
  30. openbmc-env
  31. README.md
  32. setup
README.md

OpenBMC

Build Status

The OpenBMC project can be described as a Linux distribution for embedded devices that have a BMC; typically, but not limited to, things like servers, top of rack switches or RAID appliances. The OpenBMC stack uses technologies such as Yocto, OpenEmbedded, systemd, and D-Bus to allow easy customization for your server platform.

Setting up your OpenBMC project

1) Prerequisite

  • Ubuntu 14.04
sudo apt-get install -y git build-essential libsdl1.2-dev texinfo gawk chrpath diffstat
  • Fedora 23
sudo dnf install -y git patch diffstat texinfo chrpath SDL-devel bitbake
sudo dnf groupinstall "C Development Tools and Libraries"

2) Download the source

git clone git@github.com:openbmc/openbmc.git
cd openbmc

3) Target your hardware

Any build requires an environment variable known as TEMPLATECONF to be set to a hardware target. You can see all of the known targets with find meta-* -name local.conf.sample. Choose the hardware target and then move to the next step. Additional examples can be found in the OpenBMC Cheatsheet

MachineTEMPLATECONF
Palmettometa-ibm/meta-palmetto/conf
Zaiusmeta-ingrasys/meta-zaius/conf
Witherspoonmeta-ibm/meta-witherspoon/conf

As an example target Palmetto

export TEMPLATECONF=meta-ibm/meta-palmetto/conf

4) Build

. openbmc-env
bitbake obmc-phosphor-image

Additional details can be found in the docs repository.

Build Validation and Testing

Commits submitted by members of the OpenBMC GitHub community are compiled and tested via our Jenkins server. Commits are run through two levels of testing. At the repository level the makefile make check directive is run. At the system level, the commit is built into a firmware image and run with an arm-softmmu QEMU model against a barrage of CI tests.

Commits submitted by non-members do not automatically proceed through CI testing. After visual inspection of the commit, a CI run can be manually performed by the reviewer.

Automated testing against the QEMU model along with supported systems are performed. The OpenBMC project uses the Robot Framework for all automation. Our complete test repository can be found here.

Submitting Patches

Support of additional hardware and software packages is always welcome. Please follow the contributing guidelines when making a submission. It is expected that contributions contain test cases.

Bug Reporting

Issues are managed on GitHub. It is recommended you search through the issues before opening a new one.

Features of OpenBMC

Feature List

  • REST Management
  • IPMI
  • SSH based SOL
  • Power and Cooling Management
  • Event Logs
  • Zeroconf discoverable
  • Sensors
  • Inventory
  • LED Management
  • Host Watchdog
  • Simulation
  • Code Update Support for multiple BMC/BIOS images
  • POWER On Chip Controller (OCC) Support

Features In Progress

  • Full IPMI 2.0 Compliance with DCMI
  • Verified Boot
  • HTML5 Java Script Web User Interface
  • BMC RAS

Features Requested but need help

  • OpenCompute Redfish Compliance
  • OpenBMC performance monitoring
  • cgroup user management and policies
  • Remote KVM
  • Remote USB
  • OpenStack Ironic Integration
  • QEMU enhancements

Finding out more

Dive deeper in to OpenBMC by opening the docs repository.

Contact