Yocto 2.4
Move OpenBMC to Yocto 2.4(rocko)
Tested: Built and verified Witherspoon and Palmetto images
Change-Id: I12057b18610d6fb0e6903c60213690301e9b0c67
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
diff --git a/import-layers/yocto-poky/documentation/toaster-manual/toaster-manual-setup-and-use.xml b/import-layers/yocto-poky/documentation/toaster-manual/toaster-manual-setup-and-use.xml
index 966c35d..c26a32a 100644
--- a/import-layers/yocto-poky/documentation/toaster-manual/toaster-manual-setup-and-use.xml
+++ b/import-layers/yocto-poky/documentation/toaster-manual/toaster-manual-setup-and-use.xml
@@ -18,7 +18,7 @@
<para>
Navigate to the root of your
- <ulink url='&YOCTO_DOCS_DEV_URL;#source-directory'>Source Directory</ulink>
+ <ulink url='&YOCTO_DOCS_REF_URL;#source-directory'>Source Directory</ulink>
(e.g. <filename>poky</filename>):
<literallayout class='monospaced'>
$ cd poky
@@ -61,19 +61,32 @@
</para>
</section>
- <section id='setting-a-different-address'>
- <title>Setting a Different Address</title>
+ <section id='setting-up-external-access'>
+ <title>Setting up External Access</title>
<para>
By default, Toaster binds to the loop back address
- (i.e. localhost).
- You can use the <filename>WEBPORT</filename> parameter to
- set a different host.
- For example, the following command sets the host and port
- to "0.0.0.0:8400":
+ (i.e. localhost), which does not allow access from
+ external hosts. To allow external access, use the
+ <filename>WEBPORT</filename> parameter to open an
+ address that connects to the network, specifically the
+ IP address that your NIC uses to connect to the network.
+ You can also bind to all IP addresses the computer
+ supports by using the shortcut
+ "0.0.0.0:<replaceable>port</replaceable>".
+ </para>
+
+ <para>
+ The following example binds to all IP addresses on the
+ host:
<literallayout class='monospaced'>
$ source toaster start webport=0.0.0.0:8400
</literallayout>
+ This example binds to a specific IP address on the host's
+ NIC:
+ <literallayout class='monospaced'>
+ $ source toaster start webport=192.168.1.1:8400
+ </literallayout>
</para>
</section>
@@ -145,7 +158,7 @@
<listitem><para>
From the directory containing the Toaster database,
which by default is the
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>,
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>,
invoke the <filename>createsuperuser</filename> command
from <filename>manage.py</filename>:
<literallayout class='monospaced'>
@@ -369,16 +382,16 @@
<filename>TOASTER_CONF</filename>, which is
relative to the Toaster root directory
<filename>TOASTER_DIR</filename>.
- For more information on the Toaster configuration file
- <filename>TOASTER_CONF</filename>, see the
- <link linkend='toaster-json-files'>JSON Files</link>
- section of this manual.
+ For more information on the Toaster configuration file,
+ see the
+ <link linkend='configuring-toaster'>Configuring Toaster</link>
+ chapter.
</para>
<para>
This line also runs the <filename>checksettings</filename>
command, which configures the location of the Toaster
- <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build directory</ulink>.
+ <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build directory</ulink>.
The Toaster root directory <filename>TOASTER_DIR</filename>
determines where the Toaster build directory
is created on the file system.