<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"
[<!ENTITY % poky SYSTEM "../poky.ent"> %poky; ] >

<article id='yocto-project-qs-intro'>
    <articleinfo>
        <title>Yocto Project Quick Start</title>

        <copyright>
            <year>&COPYRIGHT_YEAR;</year>
            <holder>Linux Foundation</holder>
        </copyright>

        <legalnotice>
            <para>
                Permission is granted to copy, distribute and/or modify this document under
                the terms of the <ulink type="http" url="http://creativecommons.org/licenses/by-sa/2.0/uk/">Creative Commons Attribution-Share Alike 2.0 UK: England &amp; Wales</ulink> as published by Creative Commons.
            </para>
           <note><title>Manual Notes</title>
               <itemizedlist>
                   <listitem><para>
                       This version of the
                       <emphasis>Yocto Project Quick Start</emphasis>
                       is for the &YOCTO_DOC_VERSION; release of the
                       Yocto Project.
                       To be sure you have the latest version of the manual
                       for this release, use the manual from the
                       <ulink url='&YOCTO_HOME_URL;/documentation'>Yocto Project documentation page</ulink>.
                       </para></listitem>
                   <listitem><para>
                       For manuals associated with other releases of the Yocto
                       Project, go to the
                       <ulink url='&YOCTO_HOME_URL;/documentation'>Yocto Project documentation page</ulink>
                       and use the drop-down "Active Releases" button
                       and choose the manual associated with the desired
                       Yocto Project.
                       </para></listitem>
                   <listitem><para>
                        To report any inaccuracies or problems with this
                        manual, send an email to the Yocto Project
                        discussion group at
                        <filename>yocto@yoctoproject.com</filename> or log into
                        the freenode <filename>#yocto</filename> channel.
                        </para></listitem>
               </itemizedlist>
           </note>
        </legalnotice>

        <abstract>
            <imagedata fileref="figures/yocto-project-transp.png"
                        width="6in" depth="1in"
                        align="right" scale="25" />
        </abstract>
    </articleinfo>

    <section id='welcome'>
        <title>Welcome!</title>
        <para>
            Welcome to the Yocto Project!
            The Yocto Project is an open-source collaboration project whose
            focus is developers of embedded Linux systems.
            Among other things, the Yocto Project uses a build host based
            on the OpenEmbedded (OE) project, which uses the
            <ulink url='&YOCTO_DOCS_REF_URL;#bitbake-term'>BitBake</ulink>
            tool, to construct complete Linux images.
            The BitBake and OE components combine together to form
            a reference build host, historically known as
            <ulink url='&YOCTO_DOCS_REF_URL;#poky'>Poky</ulink>
            (<emphasis>Pah</emphasis>-kee).
        </para>

        <para>
            This quick start is written so that you can quickly get a
            build host set up to use the Yocto Project and then build some
            Linux images.
            Rather than go into great detail about the Yocto Project and its
            many capabilities, this quick start provides the minimal
            information you need to try out the Yocto Project using either a
            supported Linux build host or a build host set up to use
            <ulink url='https://git.yoctoproject.org/cgit/cgit.cgi/crops/about/'>CROPS</ulink>,
            which leverages
            <ulink url='https://www.docker.com/'>Docker Containers</ulink>.
        </para>

        <para>
            Reading and using the quick start should result in you having a
            basic understanding of what the Yocto Project is and how to use
            some of its core components.
            You will also have worked through steps to produce two images:
            one that runs on the emulator (QEMU) and one that boots on actual
            hardware (i.e. MinnowBoard Turbot).
            The examples highlight the ease with which you can use the
            Yocto Project to create images for multiple types of hardware.
        </para>

        <para>
            The following list directs you to key sections of this
            quick start:
            <itemizedlist>
                <listitem><para>
                    <ulink url='http://www.yoctoproject.org/docs/2.4/yocto-project-qs/yocto-project-qs.html#yp-resources'>Setting Up to Use the Yocto Project</ulink>
                    </para></listitem>
                <listitem><para>
                    <ulink url='http://www.yoctoproject.org/docs/2.4/yocto-project-qs/yocto-project-qs.html#building-an-image-for-emulation'>Building an Image for Emulation</ulink>
                    </para></listitem>
                <listitem><para>
                    <ulink url='http://www.yoctoproject.org/docs/2.4/yocto-project-qs/yocto-project-qs.html#building-an-image-for-hardware'>Building an Image for Hardware</ulink>
                    </para></listitem>
            </itemizedlist>
<!--
            <note>
                If you do not have a system that runs Linux and you want to give
                the Yocto Project a test run, you might consider using the Yocto
                Project Build Appliance.
                The Build Appliance allows you to build and boot a custom
                embedded Linux image with the Yocto Project using a non-Linux
                development system.
                See the
                <ulink url='https://www.yoctoproject.org/tools-resources/projects/build-appliance'>Yocto Project Build Appliance</ulink>
                for more information.
            </note>
-->
        </para>

        <para>
            For more detailed information on the Yocto Project, you can
            reference these resources:
            <itemizedlist>
                <listitem><para>
                    <emphasis>Website:</emphasis>
                    The
                    <ulink url='&YOCTO_HOME_URL;'>Yocto Project Website</ulink>
                    provides background information, the latest builds, breaking
                    news, full development documentation, and access to a rich
                    Yocto Project Development Community into which you can tap.
                    </para></listitem>
                <listitem><para>
                    <emphasis>Yocto Project Development Environment Overview:</emphasis>
                    The
                    "<ulink url='&YOCTO_DOCS_REF_URL;#yp-intro'>Introducing the Yocto Project Development Environment</ulink>"
                    section presents an overview of the Yocto Project
                    development environment.
                    </para></listitem>
                <listitem><para>
                    <emphasis>FAQs:</emphasis>
                    Lists commonly asked Yocto Project questions and answers.
                    You can find two FAQs:
                    <ulink url='&YOCTO_WIKI_URL;/wiki/FAQ'>Yocto Project FAQ</ulink>
                    on a wiki, and the
                    "<ulink url='&YOCTO_DOCS_REF_URL;#faq'>FAQ</ulink>"
                    chapter in the Yocto Project Reference Manual.
                    </para></listitem>
                <listitem><para>
                    <emphasis>Developer Screencast:</emphasis>
                    The
                    <ulink url='http://vimeo.com/36450321'>Getting Started with the Yocto Project - New Developer Screencast Tutorial</ulink>
                    provides a 30-minute video created for users unfamiliar
                    with the Yocto Project but familiar with Linux build
                    hosts.
                    While this screencast is somewhat dated, the introductory
                    and fundamental concepts are useful for the beginner.
                    </para></listitem>
                <listitem><para>
                    <emphasis>Comprehensive List of Links and Other Documentation:</emphasis>
                    The
                    "<ulink url='&YOCTO_DOCS_REF_URL;#resources-links-and-related-documentation'>Links and Related Documentation</ulink>"
                    section in the Yocto Project Reference Manual provides a
                    comprehensive list of related links and documentation.
                    </para></listitem>
            </itemizedlist>
        </para>
    </section>

    <section id='yp-resources'>
        <title>Setting Up to Use the Yocto Project</title>

        <para>
            Setting up to use the Yocto Project involves getting your build
            host ready.
            If you have a native Linux machine that runs a Yocto Project
            supported distribution as described by the
            "<ulink url='&YOCTO_DOCS_REF_URL;#detailed-supported-distros'>Supported Linux Distributions</ulink>"
            section in the Yocto Project Reference Manual, you can prepare
            that machine as your build host.
            See the
            "<link linkend='qs-native-linux-build-host'>Using a Native Linux Machine</link>"
            section for more information.
        </para>

        <para>
            If you do not want to use the Yocto Project on a native Linux
            machine, you can prepare your build host to use
            <ulink url='https://git.yoctoproject.org/cgit/cgit.cgi/crops/about/'>CROPS</ulink>,
            which leverages
            <ulink url='https://www.docker.com/'>Docker Containers</ulink>.
            You can set up a build host for Windows, Mac, and Linux
            machines.
            See the
            "<link linkend='qs-crops-build-host'>Using CROPS and Containers</link>"
            section for more information.
        </para>

        <section id='qs-crops-build-host'>
            <title>Using CROPS and Containers</title>

            <para>
                Follow these steps to get your build host set up with a
                Poky container that you can use to complete the build
                examples further down in the Quick Start:
                <orderedlist>
                    <listitem><para>
                        <emphasis>Set Up to use CROss PlatformS (CROPS):</emphasis>
                        Work through the first six steps of the procedure
                        in the
                        "<ulink url='&YOCTO_DOCS_DEV_URL;#setting-up-to-use-crops'>Setting Up to Use CROss PlatformS (CROPS)</ulink>"
                        section of the Yocto Project Development Tasks Manual.
                        </para></listitem>
                    <listitem><para>
                        <emphasis>Set Up the Poky Container to Use the Yocto Project:</emphasis>
                        Go to
                        <ulink url='https://github.com/crops/poky-container/blob/master/README.md'></ulink>
                        and follow the directions to set up the Poky container
                        on your build host.</para>

                        <para>Once you complete the setup instructions for your
                        machine, you need to get a copy of the
                        <filename>poky</filename> repository on your build
                        host.
                        See the
                        "<link linkend='releases'>Yocto Project Release</link>"
                        section to continue.
                        </para></listitem>
                </orderedlist>
            </para>
        </section>

        <section id='qs-native-linux-build-host'>
            <title>Using a Native Linux Machine</title>

            <para>
                The following list shows what you need in order to use a
                Linux-based build host to use the Yocto Project to build images:
            </para>

            <itemizedlist>
                <listitem><para><emphasis>Build Host</emphasis>
                    A build host with a minimum of 50 Gbytes of free disk
                    space that is running a supported Linux distribution (i.e.
                    recent releases of Fedora, openSUSE, CentOS, Debian, or
                    Ubuntu).
                    </para></listitem>
                <listitem><para><emphasis>Build Host Packages</emphasis>
                    Appropriate packages installed on the build host.
                    </para></listitem>
            </itemizedlist>

            <section id='the-linux-distro'>
                <title>The Linux Distribution</title>

                <para>
                    The Yocto Project team verifies each release against recent
                    versions of the most popular Linux distributions that
                    provide stable releases.
                    In general, if you have the current release minus one of the
                    following distributions, you should have no problems.
                    <itemizedlist>
                        <listitem><para>
                            Ubuntu
                            </para></listitem>
                        <listitem><para>
                            Fedora
                            </para></listitem>
                        <listitem><para>
                            openSUSE
                            </para></listitem>
                        <listitem><para>
                            CentOS
                            </para></listitem>
                        <listitem><para>
                            Debian
                            </para></listitem>
                    </itemizedlist>
                    For a more detailed list of distributions that support the
                    Yocto Project, see the
                    "<ulink url='&YOCTO_DOCS_REF_URL;#detailed-supported-distros'>Supported Linux Distributions</ulink>"
                    section in the Yocto Project Reference Manual.
                </para>

                <para>
                    The OpenEmbedded build system should be able to run on any
                    modern distribution that has the following versions for
                    Git, tar, and Python.
                    <itemizedlist>
                        <listitem><para>
                            Git 1.8.3.1 or greater
                            </para></listitem>
                        <listitem><para>
                            tar 1.27 or greater
                            </para></listitem>
                        <listitem><para>
                            Python 3.4.0 or greater.
                            </para></listitem>
                    </itemizedlist>
                    If your build host does not meet any of these three listed
                    version requirements, you can take steps to prepare the
                    system so that you can still use the Yocto Project.
                    See the
                    "<ulink url='&YOCTO_DOCS_REF_URL;#required-git-tar-and-python-versions'>Required Git, tar, and Python Versions</ulink>"
                    section in the Yocto Project Reference Manual for information.
                </para>
            </section>

            <section id='packages'>
                <title>The Build Host Packages</title>

                <para>
                    Required build host packages vary depending on your
                    build machine and what you want to do with the Yocto Project.
                    For example, if you want to build an image that can run
                    on QEMU in graphical mode (a minimal, basic build
                    requirement), then the build host package requirements
                    are different than if you want to build an image on a headless
                    system or build out the Yocto Project documentation set.
                </para>

                <para>
                    Collectively, the number of required packages is large
                    if you want to be able to cover all cases.
                    <note>
                        In general, you need to have root access and then install
                        the required packages.
                        Thus, the commands in the following section may or may
                        not work depending on whether or not your Linux
                        distribution has <filename>sudo</filename> installed.
                    </note>
                </para>

                <para>
                    The following list shows the required packages needed to build
                    an image that runs on QEMU in graphical mode (e.g. essential
                    plus graphics support).
                    For lists of required packages for other scenarios, see the
                    "<ulink url='&YOCTO_DOCS_REF_URL;#required-packages-for-the-host-development-system'>Required Packages for the Host Development System</ulink>"
                    section in the Yocto Project Reference Manual.
                    <itemizedlist>
                        <listitem><para><emphasis>Ubuntu and Debian</emphasis>
                            <literallayout class='monospaced'>
     $ sudo apt-get install &UBUNTU_HOST_PACKAGES_ESSENTIAL; libsdl1.2-dev xterm
                            </literallayout>
                            </para></listitem>
                        <listitem><para><emphasis>Fedora</emphasis>
                            <literallayout class='monospaced'>
     $ sudo dnf install &FEDORA_HOST_PACKAGES_ESSENTIAL; SDL-devel xterm
                            </literallayout>
                            </para></listitem>
                        <listitem><para><emphasis>OpenSUSE</emphasis>
                            <literallayout class='monospaced'>
     $ sudo zypper install &OPENSUSE_HOST_PACKAGES_ESSENTIAL; libSDL-devel xterm
                            </literallayout>
                            </para></listitem>
                        <listitem><para><emphasis>CentOS</emphasis>
                            <literallayout class='monospaced'>
     $ sudo yum install &CENTOS_HOST_PACKAGES_ESSENTIAL; SDL-devel xterm
                            </literallayout>
                            <note><title>Notes</title>
                                <itemizedlist>
                                    <listitem><para>
                                        Extra Packages for Enterprise Linux
                                        (i.e. <filename>epel-release</filename>)
                                        is a collection of packages from Fedora
                                        built on RHEL/CentOS for easy installation
                                        of packages not included in enterprise
                                        Linux by default.
                                        You need to install these packages
                                        separately.
                                        </para></listitem>
                                    <listitem><para>
                                        The <filename>makecache</filename> command
                                        consumes additional Metadata from
                                        <filename>epel-release</filename>.
                                        </para></listitem>
                                </itemizedlist>
                            </note>
                            </para></listitem>
                    </itemizedlist>
                </para>
            </section>

            <para>
                Once you complete the setup instructions for your
                machine, you need to get a copy of the
                <filename>poky</filename> repository on your build
                host.
                Continue with the
                "<link linkend='releases'>Yocto Project Release</link>"
                section.
            </para>
        </section>

        <section id='releases'>
            <title>Yocto Project Release</title>

            <para>
                Now that your build host has the right packages (native
                Linux machine) or you have the Poky container set up
                (CROPS), you need to get a copy of the Yocto Project.
                It is recommended that you get the latest Yocto Project release
                by setting up (cloning in
                <ulink url='&YOCTO_DOCS_REF_URL;#git'>Git</ulink> terms) a
                local copy of the <filename>poky</filename> Git repository on
                your build host and then checking out the latest release.
                Doing so allows you to easily update to newer Yocto Project
                releases as well as contribute back to the Yocto Project.
            </para>

            <para>
                Here is an example from a native Linux machine that is
                running Ubuntu.
                <note>
                    If your build host is using a Poky container, you can
                    use the same Git commands.
                </note>
                The following example clones the <filename>poky</filename>
                repository and then checks out the latest Yocto Project Release
                by tag (i.e. <filename>&DISTRO_REL_TAG;</filename>):
                <literallayout class='monospaced'>
     $ git clone git://git.yoctoproject.org/poky
     Cloning into 'poky'...
     remote: Counting objects: 361782, done.
     remote: Compressing objects: 100% (87100/87100), done.
     remote: Total 361782 (delta 268619), reused 361439 (delta 268277)
     Receiving objects: 100% (361782/361782), 131.94 MiB | 6.88 MiB/s, done.
     Resolving deltas: 100% (268619/268619), done.
     Checking connectivity... done.
     $ git checkout tags/&DISTRO_REL_TAG; -b poky_&DISTRO;
                </literallayout>
            </para>

            <para>
                The previous Git <filename>checkout</filename> command
                creates a local branch named
                <filename>poky_&DISTRO;</filename>.
                The files available to you in that branch exactly match the
                repository's files in the
                <filename>&DISTRO_NAME_NO_CAP;</filename>
                development branch at the time of the Yocto Project &DISTRO;
                release.
                <note>
                    Rather than checking out the entire development branch
                    of a release (i.e. the tip), which could be continuously
                    changing while you are doing your development, you would
                    check out a branch based on a release tag as shown in
                    the previous example.
                    Doing so provides you with an unchanging, stable set of
                    files.
                </note>
            </para>

            <para>
                For more options and information about accessing Yocto
                Project related repositories, see the
                "<ulink url='&YOCTO_DOCS_DEV_URL;#working-with-yocto-project-source-files'>Working With Yocto Project Source Files</ulink>"
                section in the Yocto Project Development Tasks Manual.
            </para>
        </section>
    </section>

    <section id='qs-building-images'>
        <title>Building Images</title>

        <para>
            You are now ready to give the Yocto Project a try.
            For this example, you will be using the command line to build
            your images.
            <note>
                A graphical user interface to the Yocto Project is available
                through
                <ulink url='&YOCTO_DOCS_REF_URL;#toaster-term'>Toaster</ulink>.
                See the
                <ulink url='&YOCTO_DOCS_TOAST_URL;'>Toaster User Manual</ulink>
                for more information.
            </note>
        </para>

        <para>
            The remainder of this quick start steps you through the
            following:
            <itemizedlist>
                <listitem><para>
                    Build a <filename>qemux86</filename> reference image
                    and run it in the QEMU emulator.
                    </para></listitem>
                <listitem><para>
                    Easily change configurations so that you can quickly
                    create a second image that you can load onto bootable
                    media and actually boot target hardware.
                    This example uses the MinnowBoard
                    Turbot-compatible boards.
                    </para></listitem>
            </itemizedlist>
            <note>
                The steps in the following two sections do not provide detail,
                but rather provide minimal, working commands and examples
                designed to just get you started.
                For more details, see the appropriate manuals in the
                <ulink url='&YOCTO_HOME_URL;/documentation'>Yocto Project manual set</ulink>.
            </note>
        </para>

        <section id='building-an-image-for-emulation'>
            <title>Building an Image for Emulation</title>

            <para>
                Use the following commands to build your image.
                The OpenEmbedded build system creates an entire Linux
                distribution, including the toolchain, from source.
                <note><title>Notes about Network Proxies</title>
                    <itemizedlist>
                        <listitem><para>
                            By default, the build process searches for source
                            code using a pre-determined order through a set of
                            locations.
                            If you are working behind a firewall and your build
                            host is not set up for proxies, you could encounter
                            problems with the build process when fetching source
                            code (e.g. fetcher failures or Git failures).
                            </para></listitem>
                        <listitem><para>
                            If you do not know your proxy settings, consult your
                            local network infrastructure resources and get that
                            information.
                            A good starting point could also be to check your
                            web browser settings.
                            Finally, you can find more information on using the
                            Yocto Project behind a firewall in the Yocto Project
                            Reference Manual
                            <ulink url='&YOCTO_DOCS_REF_URL;#how-does-the-yocto-project-obtain-source-code-and-will-it-work-behind-my-firewall-or-proxy-server'>FAQ</ulink>
                            and on the
                            "<ulink url='https://wiki.yoctoproject.org/wiki/Working_Behind_a_Network_Proxy'>Working Behind a Network Proxy</ulink>"
                            wiki page.
                            </para></listitem>
                    </itemizedlist>
                </note>
            </para>

            <para>
                <orderedlist>
                    <listitem><para>
                        <emphasis>Be Sure Your Build Host is Set Up:</emphasis>
                        The steps to build an image in this section depend on
                        your build host being properly set up.
                        Be sure you have worked through the requirements
                        described in the
                        "<link linkend='yp-resources'>Setting Up to Use the Yocto Project</link>"
                        section.
                        </para></listitem>
                    <listitem><para>
                        <emphasis>Check Out Your Branch:</emphasis>
                        Be sure you are in the
                        <ulink url='&YOCTO_DOCS_REF_URL;#source-directory'>Source Directory</ulink>
                        (e.g. <filename>poky</filename>) and then check out
                        the branch associated with the latest Yocto Project
                        Release:
                        <literallayout class='monospaced'>
     $ cd ~/poky
     $ git checkout -b &DISTRO_NAME_NO_CAP; origin/&DISTRO_NAME_NO_CAP;
                        </literallayout>
                        Git's <filename>checkout</filename> command checks out
                        the current Yocto Project release into a local branch
                        whose name matches the release (i.e.
                        <filename>&DISTRO_NAME_NO_CAP;</filename>).
                        The local branch tracks the upstream branch of the
                        same name.
                        Creating your own branch based on the released
                        branch ensures you are using the latest files for
                        that release.
                        </para></listitem>
                    <listitem><para>
                        <emphasis>Initialize the Build Environment:</emphasis>
                        Run the
                        <ulink url='&YOCTO_DOCS_REF_URL;#structure-core-script'><filename>&OE_INIT_FILE;</filename></ulink>
                        environment setup script to define the OpenEmbedded
                        build environment on your build host.
                        <literallayout class='monospaced'>
     $ source &OE_INIT_FILE;
                        </literallayout>
                        Among other things, the script creates the
                        <ulink url='&YOCTO_DOCS_REF_URL;#build-directory'>Build Directory</ulink>,
                        which is <filename>build</filename> in this case
                        and is located in the
                        <ulink url='&YOCTO_DOCS_REF_URL;#source-directory'>Source Directory</ulink>.
                        After the script runs, your current working directory
                        is set to the Build Directory.
                        Later, when the build completes, the Build Directory
                        contains all the files created during the build.
                        </para></listitem>
                    <listitem><para>
                        <emphasis>Examine Your Local Configuration File:</emphasis>
                        When you set up the build environment, a local
                        configuration file named
                        <filename>local.conf</filename> becomes available in
                        a <filename>conf</filename> subdirectory of the
                        Build Directory.
                        Before using BitBake to start the build, you can
                        look at this file and be sure your general
                        configurations are how you want them:
                        <itemizedlist>
                            <listitem><para>
                                To help conserve disk space during builds,
                                you can add the following statement to your
                                project's configuration file, which for this
                                example is
                                <filename>poky/build/conf/local.conf</filename>.
                                Adding this statement deletes the work
                                directory used for building a recipe once the
                                recipe is built.
                                <literallayout class='monospaced'>
     INHERIT += "rm_work"
                                </literallayout>
                                </para></listitem>
                            <listitem><para>
                                By default, the target machine for the build is
                                <filename>qemux86</filename>,
                                which produces an image that can be used in
                                the QEMU emulator and is targeted at an
                                <trademark class='registered'>Intel</trademark>
                                32-bit based architecture.
                                Further on in this example, this default is
                                easily changed through the
                                <ulink url='&YOCTO_DOCS_REF_URL;#var-MACHINE'><filename>MACHINE</filename></ulink>
                                variable so that you can quickly
                                build an image for a different machine.
                                </para></listitem>
                            <listitem><para>
                                Another consideration before you build is the
                                package manager used when creating the image.
                                The default <filename>local.conf</filename>
                                file selects the RPM package manager.
                                You can control this configuration by using the
                                <filename><ulink url='&YOCTO_DOCS_REF_URL;#var-PACKAGE_CLASSES'><filename>PACKAGE_CLASSES</filename></ulink></filename>
                                variable.</para>
                                <para>Selection of the package manager is separate
                                from whether package management is used at runtime
                                in the target image.</para>
                                <para>For additional package manager selection
                                information, see the
                                "<ulink url='&YOCTO_DOCS_REF_URL;#ref-classes-package'><filename>package.bbclass</filename></ulink>"
                                section in the Yocto Project Reference Manual.
                                </para></listitem>
                        </itemizedlist>
                        </para></listitem>
                    <listitem><para>
                        <emphasis>Start the Build:</emphasis>
                        Continue with the following command to build an OS image
                        for the target, which is
                        <filename>core-image-sato</filename> in this example:
                        <note>
                            Depending on the number of processors and cores, the
                            amount of RAM, the speed of your Internet connection
                            and other factors, the build process could take
                            several hours the first time you run it.
                            Subsequent builds run much faster since parts of the
                            build are cached.
                        </note>
                        <literallayout class='monospaced'>
     $ bitbake core-image-sato
                        </literallayout>
                        <note>
                            <para>
                                If you experience a build error due to resources
                                temporarily being unavailable and it appears you
                                should not be having this issue, it might be due
                                to the combination of a 4.3+ Linux kernel and
                                <filename>systemd</filename> version 228+
                                (i.e. see this
                                <ulink url='http://unix.stackexchange.com/questions/253903/creating-threads-fails-with-resource-temporarily-unavailable-with-4-3-kernel'>link</ulink>
                                for information).
                            </para>

                            <para>
                                To work around this issue, you can try either
                                of the following:
                                <itemizedlist>
                                    <listitem><para>
                                        Try the build again.
                                        </para></listitem>
                                    <listitem><para>
                                        Modify the "DefaultTasksMax"
                                        <filename>systemd</filename> parameter
                                        by uncommenting it and setting it to
                                        "infinity".
                                        You can find this parameter in the
                                        <filename>system.conf</filename> file
                                        located in
                                        <filename>/etc/systemd</filename>
                                        on most systems.
                                        </para></listitem>
                                </itemizedlist>
                            </para>
                        </note>
                        For information on using the
                        <filename>bitbake</filename> command, see the
                        "<ulink url='&YOCTO_DOCS_REF_URL;#usingpoky-components-bitbake'>BitBake</ulink>"
                        section in the Yocto Project Reference Manual, or see the
                        "<ulink url='&YOCTO_DOCS_BB_URL;#bitbake-user-manual-command'>BitBake Command</ulink>"
                        section in the BitBake User Manual.
                        For information on other targets, see the
                        "<ulink url='&YOCTO_DOCS_REF_URL;#ref-images'>Images</ulink>"
                        chapter in the Yocto Project Reference Manual.
                        </para></listitem>
                    <listitem><para>
                        <emphasis>Simulate Your Image Using QEMU:</emphasis>
                        Once this particular image is built, you can start QEMU
                        and run the image:
                        <literallayout class='monospaced'>
     $ runqemu qemux86
                        </literallayout>
                        If you want to learn more about running QEMU, see the
                        "<ulink url="&YOCTO_DOCS_DEV_URL;#dev-manual-qemu">Using the Quick EMUlator (QEMU)</ulink>"
                        chapter in the Yocto Project Development Tasks Manual.
                        </para></listitem>
                    <listitem><para>
                        <emphasis>Exit QEMU:</emphasis>
                        Exit QEMU by either clicking on the shutdown icon or by
                        typing <filename>Ctrl-C</filename> in the QEMU
                        transcript window from which you evoked QEMU.
                        </para></listitem>
                </orderedlist>
            </para>
        </section>

        <section id='building-an-image-for-hardware'>
            <title>Building an Image for Hardware</title>

            <para id='qs-minnowboard-example'>
                The following steps show how easy it is to set up to build an
                image for a new machine.
                These steps build an image for the MinnowBoard Turbot, which is
                supported by the Yocto Project and the
                <filename>meta-intel</filename> <filename>intel-corei7-64</filename>
                and <filename>intel-core2-32</filename> Board Support Packages
                (BSPs).
                <note>
                    The MinnowBoard Turbot ships with 64-bit firmware.
                    If you want to use the board in 32-bit mode, you must
                    download the
                    <ulink url='http://firmware.intel.com/projects/minnowboard-max'>32-bit firmware</ulink>.
                </note>
            </para>

            <para>
                <orderedlist>
                    <listitem><para>
                        <emphasis>Create a Local Copy of the
                        <filename>meta-intel</filename> Repository:</emphasis>
                        Building an image for the MinnowBoard Turbot requires
                        the
                        <filename>meta-intel</filename> layer.
                        Use the <filename>git clone</filename> command to create
                        a local copy of the repository inside your
                        <ulink url='&YOCTO_DOCS_REF_URL;#source-directory'>Source Directory</ulink>,
                        which is <filename>poky</filename> in this example:
                        <literallayout class='monospaced'>
     $ cd $HOME/poky
     $ git clone git://git.yoctoproject.org/meta-intel
     Cloning into 'meta-intel'...
     remote: Counting objects: 14039, done.
     remote: Compressing objects: 100% (4471/4471), done.
     remote: Total 14039 (delta 8130), reused 13837 (delta 7947)
     Receiving objects: 100% (14039/14039), 4.27 MiB | 3.98 MiB/s, done.
     Resolving deltas: 100% (8130/8130), done.
     Checking connectivity... done.
                        </literallayout>
                        By default when you clone a Git repository, the
                        "master" branch is checked out.
                        Before you build your image that uses the
                        <filename>meta-intel</filename> layer, you must be
                        sure that both repositories
                        (<filename>meta-intel</filename> and
                        <filename>poky</filename>) are using the same releases.
                        Because you used the <filename>&DISTRO_REL_TAG;</filename>
                        tag when you checked out the <filename>poky</filename>
                        repository by tag, you should use a
                        <filename>meta-intel</filename>
                        tag that corresponds with the release you used for
                        <filename>poky</filename>.
                        Consequently, you need to checkout out the
                        "<filename>&METAINTELVERSION;-&DISTRO_NAME_NO_CAP;-&YOCTO_DOC_VERSION;</filename>"
                        branch after cloning <filename>meta-intel</filename>:
                        <literallayout class='monospaced'>
     $ cd $HOME/poky/meta-intel
     $ git checkout tags/&METAINTELVERSION;-&DISTRO_NAME_NO_CAP;-&YOCTO_DOC_VERSION; -b meta-intel-&DISTRO_NAME_NO_CAP;-&YOCTO_DOC_VERSION;
     Switched to a new branch 'meta-intel-&DISTRO_NAME_NO_CAP;-&YOCTO_DOC_VERSION;'
                        </literallayout>
                        The previous Git <filename>checkout</filename> command
                        creates a local branch named
                        <filename>meta-intel-&DISTRO_NAME_NO_CAP;-&YOCTO_DOC_VERSION;</filename>.
                        You have the option to name your local branch whatever
                        you want by providing any name you like for
                        "meta-intel-&DISTRO_NAME_NO_CAP;-&YOCTO_DOC_VERSION;"
                        in the above example.
                        </para></listitem>
                    <listitem><para>
                        <emphasis>Configure the Build:</emphasis>
                        To configure the build, you edit the
                        <filename>bblayers.conf</filename> and
                        <filename>local.conf</filename> files, both of which are
                        located in the <filename>build/conf</filename> directory.
                        </para>

                        <para>Here is a quick way to make the edits.
                        The first command uses the
                        <filename>bitbake-layers add-layer</filename> command
                        to add the <filename>meta-intel</filename>
                        layer, which contains the <filename>intel-core*</filename>
                        BSPs to the build.
                        The second command selects the BSP by setting the
                        <ulink url='&YOCTO_DOCS_REF_URL;#var-MACHINE'><filename>MACHINE</filename></ulink>
                        variable.
                        <literallayout class='monospaced'>
     $ cd $HOME/poky/build
     $ bitbake-layers add-layer "$HOME/poky/meta-intel"
     $ echo 'MACHINE = "intel-corei7-64"' >> conf/local.conf
                        </literallayout>
                        <note><title>Notes</title>
                        <para>
                            If you want a 64-bit build, use the following:
                            <literallayout class='monospaced'>
     $ echo 'MACHINE = "intel-corei7-64"' >> conf/local.conf
                            </literallayout>
                        </para>

                        <para>
                            If you want 32-bit images, use the following:
                            <literallayout class='monospaced'>
     $ echo 'MACHINE = "intel-core2-32"' >> conf/local.conf
                            </literallayout>
                        </para>
                        </note>
                        </para></listitem>
                    <listitem><para>
                        <emphasis>Build an Image for MinnowBoard
                        Turbot:</emphasis>
                        The type of image you build depends on your goals.
                        For example, the previous build created a
                        <filename>core-image-sato</filename> image, which is an
                        image with Sato support.
                        It is possible to build many image types for the
                        MinnowBoard Turbot.
                        Some possibilities are <filename>core-image-base</filename>,
                        which is a console-only image.
                        Another choice could be a
                        <filename>core-image-full-cmdline</filename>, which is
                        another console-only image but has more full-features
                        Linux system functionality installed.
                        For types of images you can build using the Yocto
                        Project, see the
                        "<ulink url='&YOCTO_DOCS_REF_URL;#ref-images'>Images</ulink>"
                        chapter in the Yocto Project Reference Manual.</para>
                        <para>Because configuration changes are minimal to set up
                        for this second build, the OpenEmbedded build system can
                        re-use files from previous builds as much as possible.
                        Re-using files means this second build will be much faster
                        than an initial build.
                        For this example, the <filename>core-image-base</filename>
                        image is built:
                        <literallayout class='monospaced'>
     $ bitbake core-image-base
                        </literallayout>
                        <note>
                            <para>
                                If you experience a build error due to resources
                                temporarily being unavailable and it appears you
                                should not be having this issue, it might be due
                                to the combination of a 4.3+ Linux kernel and
                                <filename>systemd</filename> version 228+
                                (i.e. see this
                                <ulink url='http://unix.stackexchange.com/questions/253903/creating-threads-fails-with-resource-temporarily-unavailable-with-4-3-kernel'>link</ulink>
                                for information).
                            </para>

                            <para>
                                To work around this issue, you can try either
                                of the following:
                                <itemizedlist>
                                    <listitem><para>
                                        Try the build again.
                                        </para></listitem>
                                    <listitem><para>
                                        Modify the "DefaultTasksMax"
                                        <filename>systemd</filename> parameter
                                        by uncommenting it and setting it to
                                        "infinity".
                                        You can find this parameter in the
                                        <filename>system.conf</filename> file
                                        located in
                                        <filename>/etc/systemd</filename>
                                        on most systems.
                                        </para></listitem>
                                </itemizedlist>
                            </para>
                        </note>
                        Once the build completes, the resulting console-only image
                        is located in the Build Directory here:
                        <literallayout class='monospaced'>
     tmp/deploy/images/intel-corei7-64/core-image-base-intel-corei7-64.wic
                        </literallayout>
                        </para></listitem>
                    <listitem><para>
                        <emphasis>Write the Image:</emphasis>
                        You can write the image just built to a bootable media
                        (e.g. a USB key, SATA drive, SD card, etc.) using the
                        <filename>dd</filename> utility:
                        <literallayout class='monospaced'>
     $ sudo dd if=tmp/deploy/images/intel-corei7-64/core-image-base-intel-corei7-64.wic of=TARGET_DEVICE
                        </literallayout>
                        In the previous command, the
                        <filename>TARGET_DEVICE</filename> is the device node in
                        the host machine (e.g. <filename>/dev/sdc</filename>, which
                        is most likely a USB stick, or
                        <filename>/dev/mmcblk0</filename>, which is most likely an
                        SD card).
                        </para></listitem>
                    <listitem><para>
                        <emphasis>Boot the Hardware:</emphasis>
                        With the boot device provisioned, you can insert the
                        media into the MinnowBoard Turbot and boot the hardware.
                        The board should automatically detect the media and boot to
                        the bootloader and subsequently the operating system.
                        </para>

                        <para>If the board does not boot automatically, you can
                        boot it manually from the EFI shell as follows:
                        <literallayout class='monospaced'>
     Shell> connect -r
     Shell> map -r
     Shell> fs0:
     Shell> bootx64
                        </literallayout>
                        <note>
                            For a 32-bit image use the following:
                            <literallayout class='monospaced'>
     Shell> bootia32
                            </literallayout>
                        </note>
                        </para></listitem>
                </orderedlist>
            </para>
        </section>
    </section>

    <section id='qs-next-steps'>
        <title>Next Steps</title>

        <para>
            If you completed all the steps in the previous section then
            congratulations!
            What now?
        </para>

        <para>
            Depending on what you primary interests are with the Yocto Project,
            you could consider any of the following:
            <itemizedlist>
                <listitem><para>
                    <emphasis>Visit the Yocto Project Web Site:</emphasis>
                    The official
                    <ulink url='&YOCTO_HOME_URL;'>Yocto Project</ulink>
                    web site contains information on the entire project.
                    Visiting this site is a good way to familiarize yourself
                    with the overall project.
                    </para></listitem>
                <listitem><para>
                    <emphasis>Look Through the
                    <ulink url='&YOCTO_DOCS_DEV_URL;#dev-manual-intro'>Yocto Project Development Tasks Manual</ulink>:</emphasis>
                    This manual contains procedural information grouped to
                    help you get set up, work with layers, customize images,
                    write new recipes, work with libraries, and use QEMU.
                    The information is task-based and spans the breadth of the
                    Yocto Project.
                    </para></listitem>
                <listitem><para>
                    <emphasis>Look Through the
                    <ulink url='&YOCTO_DOCS_SDK_URL;'>Yocto Project Application Development and the Extensible Software Development Kit (eSDK)</ulink>
                    manual:</emphasis>
                    This manual describes how to use both the
                    <ulink url='&YOCTO_DOCS_SDK_URL;#sdk-using-the-standard-sdk'>standard SDK</ulink>
                    and the
                    <ulink url='&YOCTO_DOCS_SDK_URL;#sdk-extensible'>extensible SDK</ulink>,
                    which are used primarily for application development.
                    This manual also provides example workflows
                    that use the popular <trademark class='trade'>Eclipse</trademark>
                    development environment and that use <filename>devtool</filename>.
                    See the
                    "<ulink url='&YOCTO_DOCS_SDK_URL;#workflow-using-eclipse'>Workflow using Eclipse™</ulink>"
                    and
                    "<ulink url='&YOCTO_DOCS_SDK_URL;#using-devtool-in-your-sdk-workflow'>Using <filename>devtool</filename> in your SDK Workflow</ulink>"
                    sections for more information.
                    </para></listitem>
                <listitem><para>
                    <emphasis>Learn About Kernel Development:</emphasis>
                    If you want to see how to work with the kernel and
                    understand Yocto Linux kernels, see the
                    <ulink url='&YOCTO_DOCS_KERNEL_DEV_URL;#kernel-dev-intro'>Yocto Project Linux Kernel Development Manual</ulink>.
                    This manual provides information on how to patch the
                    kernel, modify kernel recipes, and configure the kernel.
                    </para></listitem>
                <listitem><para>
                    <emphasis>Learn About Board Support Packages (BSPs):</emphasis>
                    If you want to learn about BSPs, see the
                    <ulink url='&YOCTO_DOCS_BSP_URL;#bsp'>Yocto Project Board Support Packages (BSP) Developer's Guide</ulink>.
                    This manual also provides an example BSP creation workflow.
                    See the
                    <ulink url='&YOCTO_DOCS_BSP_URL;#developing-a-board-support-package-bsp'>"Developing a Board Support Package (BSP)</ulink>"
                    section.
                    </para></listitem>
                <listitem><para>
                    <emphasis>Learn About Toaster:</emphasis>
                    Toaster is a web interface to the Yocto Project's
                    OpenEmbedded build system.
                    If you are interested in using this type of interface to
                    create images, see the
                    <ulink url='&YOCTO_DOCS_TOAST_URL;#toaster-manual-intro'>Toaster User Manual</ulink>.
                    </para></listitem>
                <listitem><para>
                    <emphasis>Have Available the
                    <ulink url='&YOCTO_DOCS_REF_URL;#ref-manual-intro'>Yocto Project Reference Manual:</ulink></emphasis>
                    Unlike the rest of the Yocto Project manual set, this manual
                    is comprised of material suited for reference rather than
                    procedures.
                    You can get
                    <ulink url='&YOCTO_DOCS_REF_URL;#usingpoky'>build details</ulink>,
                    a
                    <ulink url='&YOCTO_DOCS_REF_URL;#development-concepts'>closer look</ulink>
                    at how the pieces of the Yocto Project development
                    environment work together, information on various
                    <ulink url='&YOCTO_DOCS_REF_URL;#technical-details'>technical details</ulink>,
                    guidance on
                    <ulink url='&YOCTO_DOCS_REF_URL;#migration'>migrating to a newer Yocto Project release</ulink>,
                    reference material on the
                    <ulink url='&YOCTO_DOCS_REF_URL;#ref-structure'>directory structure</ulink>,
                    <ulink url='&YOCTO_DOCS_REF_URL;#ref-classes'>classes</ulink>,
                    and
                    <ulink url='&YOCTO_DOCS_REF_URL;#ref-tasks'>tasks</ulink>.
                    The Yocto Project Reference Manual also contains a fairly
                    comprehensive
                    <ulink url='&YOCTO_DOCS_REF_URL;#ref-variables-glossary'>glossary of variables</ulink>
                    used within the Yocto Project.
                    </para></listitem>
            </itemizedlist>
        </para>
    </section>
</article>
<!--
vim: expandtab tw=80 ts=4
-->