subtree updates
poky: 80f2b56ad8..d78650b980:
Ahmed Hossam (1):
go.bbclass: Allow adding parameters to go ldflags
Alejandro Hernandez Samaniego (1):
baremetal-image: Fix do_image dependencies
Alexander Kanavin (153):
meson: update 0.58.1 -> 0.59.1
libcap: update 2.51 -> 2.54
lua: add a recipe from meta-oe
lua: update 5.3.6 -> 5.4.3
rpm: update 4.16.1.3 -> 4.17.0
libdnf: fix the rpm sqlite-only target setup
libsolv: disable rpm bdb format support
perl: do not build berkeley db module by default
package_rpm: use zstd instead of xz
qemu: update 6.0.0 -> 6.1.0
runqemu: correct vga-virtio option to keep virgl enabled
gnupg: update 2.3.1 -> 2.3.2
pinentry: update 1.1.1 -> 1.2.0
spirv-tools: update 2021.2 -> 2021.3
glslang: update 11.5.0 -> 11.6.0
shaderc: update 2021.1 -> 2021.2
inetutils: update 2.1 -> 2.2
systemd: update 249.3 -> 249.4
lsof: update 4.91 -> 4.94.0
libpam: update 1.5.1 -> 1.5.2
rt-tests: update 2.1 -> 2.2
libgit2: update 1.1.1 -> 1.2.0
libssh2: update 1.9.0 -> 1.10.0
libhandy: update 1.2.3 -> 1.4.0
qemu: install qmp module without hardcoding the python version in oeqa scripts
lttng-tools: replace ad hoc ptest fixup with upstream fixes
rust: drop PV from include file names
rust: update 1.54.0 -> 1.55.0
librsvg: update 2.40.21 -> 2.52.0 (transition to rust!)
librsvg: do not enable nativesdk
librsvg: add backports to fix big endian targets (e.g. mips)
librsvg: use only the target architecture to determine availability of atomic primitives
librsvg: restore reproducibility
adwaita-icon-theme: update 3.34/38 -> 41.0
gstreamer1.0-plugins-bad: disable rsvg on x32
rust/cargo: exclude UNINATIVE_LOADER from task signature
rust-common.bbclass: rewrite toolchain wrappers in (native) python
rust: do not write ar into target json definitions
rust: generate target definitions from (arch, abi), not just arch
openssl: update 1.1.1l -> 3.0.0
cryptodev-tests: do not use -Werror with openssl 3
serf: add a openssl 3 compatibility fix
ruby: disable openssl extension
glib-2.0: update 2.68.4 -> 2.70.0
glib-networking: update 2.68.2 -> 2.70.0
bison: update 3.7.6 -> 3.8.1
libdnf: update 0.63.1 -> 0.64.0
libexif: update 0.6.22 -> 0.6.23
sudo: update 1.9.7p2 -> 1.9.8p1
wget: update 1.21.1 -> 1.21.2
coreutils: update 8.32 -> 9.0
itstool: update 2.0.6 -> 2.0.7
nghttp2: add recipe from meta-oe
libsoup: add a 3.x recipe
webkitgtk: trim down DEPENDS
epiphany: trim down DEPENDS
webkitgtk: update 2.32.3 -> 2.34.0
epiphany: update 40.3 -> 41.0
python3: update 3.9.7 -> 3.10.0
libjitterentropy: update 3.1.0 -> 3.3.0
kea: update 1.8.2 -> 2.0.0
ghostscript: update 9.54.0 -> 9.55.0
lighttpd: update 1.4.59 -> 1.4.60
bluez5: update 5.61 -> 5.62
ovmf: update 202105 -> 202108
systemd: update 249.4 -> 249.5
meson: update 0.59.1 -> 0.59.2
python3-pip: update 21.2.4 -> 21.3
valgrind: update 3.17.0 -> 3.18.1
librsvg: update 2.52.0 -> 2.52.2
libva: update 2.12.0 -> 2.13.0
liberation-fonts: update 2.1.4 -> 2.1.5
ca-certificates: update 20210119 -> 20211016
curl: update 7.78.0 -> 7.79.1
libgit2: update 1.2.0 -> 1.3.0
libxcrypt: upgrade 4.4.25 -> 4.4.26
bison: upgrade 3.8.1 -> 3.8.2
cmake: update 3.21.2 -> 3.21.3
git: upgrade 2.33.0 -> 2.33.1
tzdata: upgrade 2021a -> 2021d
ofono: upgrade 1.32 -> 1.33
openssh: upgrade 8.7p1 -> 8.8p1
sysvinit: upgrade 2.99 -> 3.00
btrfs-tools: upgrade 5.13.1 -> 5.14.2
ccache: upgrade 4.4 -> 4.4.2
createrepo-c: upgrade 0.17.5 -> 0.17.6
libcomps: upgrade 0.1.17 -> 0.1.18
libedit: upgrade 20210714-3.1 -> 20210910-3.1
librepo: upgrade 1.14.1 -> 1.14.2
python3-jinja2: upgrade 3.0.1 -> 3.0.2
python3-pygobject: upgrade 3.40.1 -> 3.42.0
python3-setuptools: upgrade 58.0.4 -> 58.2.0
vala: upgrade 0.52.5 -> 0.54.2
acpica: upgrade 20210730 -> 20210930
asciidoc: upgrade 9.1.0 -> 9.1.1
libarchive: upgrade 3.5.1 -> 3.5.2
msmtp: upgrade 1.8.15 -> 1.8.17
sudo: upgrade 1.9.8p1 -> 1.9.8p2
gobject-introspection: upgrade 1.68.0 -> 1.70.0
gsettings-desktop-schemas: upgrade 40.0 -> 41.0
json-glib: upgrade 1.6.4 -> 1.6.6
libdazzle: upgrade 3.40.0 -> 3.42.0
harfbuzz: upgrade 2.9.1 -> 3.0.0
pango: upgrade 1.48.9 -> 1.48.10
libinput: upgrade 1.19.0 -> 1.19.1
linux-firmware: upgrade 20210818 -> 20210919
wireless-regdb: upgrade 2021.07.14 -> 2021.08.28
mpg123: upgrade 1.28.2 -> 1.29.0
puzzles: upgrade to latest revision
libwpe: upgrade 1.10.1 -> 1.12.0
diffoscope: upgrade 182 -> 187
fribidi: upgrade 1.0.10 -> 1.0.11
iso-codes: upgrade 4.6.0 -> 4.7.0
libatomic-ops: upgrade 7.6.10 -> 7.6.12
libcap: upgrade 2.54 -> 2.59
libmd: upgrade 1.0.3 -> 1.0.4
libsoup-2.4: upgrade 2.72.0 -> 2.74.0
gnupg: update 2.3.2 -> 2.3.3
libssh2: skip one of the ptests until openssh 8.8 compatibility is fixed
systemd: disable seccomp on mips32
waffle: convert to git, website is down
u-boot: upgrade 2021.07 -> 2021.10
psplash: upgrade to latest revision
stress-ng: convert to git, website is down
json-c: correct upstream version check
createrepo-c: upgrade 0.17.6 -> 0.17.7
python3-numpy: upgrade 1.21.2 -> 1.21.3
python3-pip: upgrade 21.3 -> 21.3.1
python3-setuptools: upgrade 58.2.0 -> 58.3.0
msmtp: upgrade 1.8.17 -> 1.8.18
gi-docgen: upgrade 2021.7 -> 2021.8
piglit: upgrade to latest revision
libinput: upgrade 1.19.1 -> 1.19.2
mpg123: upgrade 1.29.0 -> 1.29.2
puzzles: upgrade to latest revision
webkitgtk: upgrade 2.34.0 -> 2.34.1
wpebackend-fdo: upgrade 1.10.0 -> 1.12.0
diffoscope: upgrade 187 -> 188
libcap: upgrade 2.59 -> 2.60
vte: upgrade 0.64.2 -> 0.66.0
ncurses: update 6.2 -> 6.3
tzdata: update 2021d -> 2021e
asciidoc: update 9.1.1 -> 10.0.0
waffle: update 1.6.1 -> 1.7.0
virgl: skip headless test on specific older distros and fail otherwise
gptfdisk: address ncurses 6.3 compatibility
powertop: address ncurses 6.3 compatibility
systemtap: address ncurses 6.3 compatibility
igt-gpu-tools: address meson 0.60 compatibility
python3-pygobject: do not supply unknown g-i options
gstreamer1.0-python: do not supply unknown g-i options
webkitgtk: drop unnecessary SSE disabling patch
cups: exclude beta/rc versions from version check
Alexandre Belloni (5):
inetutils: drop CVE-2021-40491 patch
oeqa/selftest/sstatetests: fix typo ware -> were
maintainers.inc: fix up rust-cross entry
libevent,btrfs-tools: fix Upstream-Status tag
ruby: fix Upstream-Status
Andreas Müller (1):
webkitgtk: add gperf-native to DEPENDS to fix build
Andrei Gherzan (1):
qemu: Define libnfs PACKAGECONFIG
Andrej Valek (3):
busybox: 1.34.0 -> 1.34.1
featimage: refactor style
kernel-fitimage: use correct kernel image
Andres Beltran (1):
buildhistory: Fix package output files for SDKs
Bruce Ashfield (15):
linux-yocto/5.14: scripts/gcc-plugins: consistently use HOSTCC
linux-yocto/5.14: update to v5.14.8
linux-yocto/5.14: bsp/qemuarm*-gfx: use virtio graphics
linux-yocto/5.10: update to v5.10.69
linux-yocto/5.10: update to v5.10.70
linux-yocto/5.14: update to v5.14.9
kernel-yocto: don't apply config metadata patches twice
linux-yocto/5.14: revert: scripts/gcc-plugins: consistently use HOSTCC
linux-yocto/5.10: update to v5.10.73
linux-yocto/5.14: update to v5.14.12
linux-yocto/5.14: update to v5.14.13
linux-yocto/5.10: update to v5.10.74
linux-yocto/5.14: common-pc: enable CONFIG_ATA_PIIX as built-in
linux-yocto/5.14: update to v5.14.14
linux-yocto/5.10: update to v5.10.75
Caner Altinbasak (2):
bitbake: npmsw: Avoid race condition with multiple npm fetchers
bitbake: fetch2: Do not attempt to verify donestamp if download is not complete
Changhyeok Bae (2):
iproute2: update to 5.14.0
ethtool: update to 5.14
Changqing Li (1):
lttng-ust: fix do_compile failure for arm32 with DEBUG_BUILD enabled
Daiane Angolini (2):
machine/qemuarm*: Fix UBOOT_MACHINE value
ref-manual: Update how to set a useradd password
Daniel McGregor (3):
bison: prevent checking for textstyle.
bitbake.conf: Add gpg-agent as a host tool
sstate: Allow validation of sstate singatures against list of keys
David Joyner (1):
rust: add support for big endian 64-bit PowerPC
Denys Dmytriyenko (2):
wayland-protocols: upgrade 1.21 -> 1.22
wayland-protocols: upgrade 1.22 -> 1.23
Fred Liu (1):
glibc: Drop libcidn package
Henry Kleynhans (1):
sstate: Switch to ZStandard compressor support
Hsia-Jun(Randy) Li (1):
meson: install native file in sdk
Ian Ray (1):
archiver: Configurable tarball compression
Jon Mason (10):
oeqa/manual: Fix no longer valid URLs
bitbake: bitbake:toaster:test: Update SSTATE URL
yocto-bsp/poky: replace http with https for URLs
bitbake: bitbake: replace http with https for URLs
documentation: update sources mirror URL
documentation: replace http with https for URLs
documentation: use YOCTO_DL_URL
dev-manual: remove errant /
runqemu: add DEPLOY_DIR_IMAGE replacement in QB_OPT_APPEND
bitbake: bitbake-user-manual: update sources mirror URL
Jose Quaresma (15):
gstreamer1.0: 1.18.4 -> 1.18.5
gstreamer1.0-plugins-base: 1.18.4 -> 1.18.5
gstreamer1.0-plugins-good: 1.18.4 -> 1.18.5
gstreamer1.0-plugins-bad: 1.18.4 -> 1.18.5
gstreamer1.0-plugins-ugly: 1.18.4 -> 1.18.5
gstreamer1.0-rtsp-server: 1.18.4 -> 1.18.5
gstreamer1.0-libav: 1.18.4 -> 1.18.5
gstreamer1.0-vaapi: 1.18.4 -> 1.18.5
gstreamer1.0-omx: 1.18.4 -> 1.18.5
gstreamer1.0-python: 1.18.4 -> 1.18.5
gst-devtools: 1.18.4 -> 1.18.5
gst-examples: 1.18.4 -> 1.18.5
patch.bbclass: when the patch fails show more info on the fatal error
sstate.bbclass: count the files on mirrors using the pre local files
sstate: fix touching files inside pseudo
Joshua Watt (4):
bitbake: async: Close sync client event loop
bitbake: hashserv: Add tests for diverging reports
bitbake: hashserv: Fix diverging report race condition
classes/populate_sdk_base: Add setscene tasks
Kai Kang (1):
sudo: update multilib patch for sudo.conf
Khem Raj (11):
pkgconfig: Update to latest
libseccomp: Upgrade to 2.5.2 and beyond
openssl: Drop riscv32 upstreamed patches
opensbi-payloads.inc: Use strings for fallback
mesa: Enable svga for x86 only
qemu: Add knob for enabling PMDK pmem support
opensbi-payloads: Add dependency on kernel if fdt is set
librsvg: Fix vendored libc to work on riscv and musl
librsvg: Bump to 2.52.0 -> 2.52.2
rust: Upgrade to 1.56.0
librsvg: Disable 64bit atomics in crossbeam for rv32
Kiran Surendran (1):
ffmpeg: fix CVE-2021-38114
Konrad Weihmann (1):
libical: fix append in DEPENDS
Lukasz Majewski (1):
glibc: Extract common code to build tests to glibc-tests.inc
Marek Vasut (1):
piglit: upgrade to latest revision
Martin Jansa (2):
webkitgtk: add PACKAGECONFIG for opengl-or-es
boost: allow searching for python310
Maximilian Blenk (1):
mount-copybind: add rootcontext mountoption for overlayfs
Michael Halstead (2):
scripts/autobuilder-worker-prereq-tests: jinja2 check
releases: update to include 3.4 honister
Michael Opdenacker (18):
manuals: font fixes
ref-manual: document DEBUG_PREFIX_MAP
manuals: replace "apt-get" by "apt"
Makefile: allow epub and latexpdf outputs to use diagrams from SVG sources
conf.py: use PNG first in EPUB output
overview-manual: SVG diagram for the git workflow
docs: add "make all" to build old types of docs (html, epub, pdf) at once
manuals: introduce 'yocto_sstate' extlink
overview-manual: simplify expression
dev-manual: correct NO_GENERIC_LICENSE section title
dev-manual: warn about license compliance issues when static libraries are used
devpyshell: rename to pydevshell
ref-manual: document TOOLCHAIN_HOST_TASK_ESDK
manuals: rename "devpyshell" to "pydevshell"
ref-manual: document SOURCE_DATE_EPOCH
ref-manual: fix description of SOURCE_DATE_EPOCH
releases.rst: fix release number for 3.3.3
docs: poky.yaml: updates for 3.4
Mike Crowe (2):
lib/oe/qa,insane: Move extra error handling functions to library
insane,license,license_image: Allow treating license problems as errors
Mingli Yu (1):
packagedata.py: silence a DeprecationWarning
Oleh Matiusha (1):
findutils: add ptest
Oleksandr Kravchuk (15):
python3: update to 3.9.7
python3-git: update to 3.1.24
python3-dbusmock: update to 0.24.0
python3-setuptools: update to 58.0.4
python3-setuptools: minor cleanup
xf86-input-libinput: update to 1.2.0
libinput: update to 1.19.0
libxi: update to 1.8
xorgproto: update to 2021.5
xkeyboard-config: update to 2.34
libxkbcommon: update to 1.3.1
mirrors.bbclass: remove dead infozip mirrors
man-pages: update to 5.13
python3-smmap: update to 5.0.0
python3-pyparsing: update to 3.0.0
Pablo Saavedra Rodi?o (1):
mesa: upgrade 21.2.1 -> 21.2.4
Paul Barker (1):
bitbake: doc: bitbake-user-manual: Document BB_GIT_SHALLOW and friends
Paul Eggleton (7):
migration-3.4: tweak overrides change section
ref-manual: remove meta class
poky.yaml: add lz4 and zstd to essential host packages
migration-3.4: add additional migration info
migration: tweak introduction section
poky.yaml: fix lz4 package name for older Ubuntu versions
migration-3.4: add some extra packaging notes
Pavel Zhukov (1):
weston: wrapper for weston modules argument
Peter Hoyes (2):
u-boot: Convert ${UBOOT_ENV}.cmd into ${UBOOT_ENV}.scr
u-boot: Fix syntax error in ${UBOOT_ENV}.scr compilation
Peter Kjellerstedt (2):
meson.bblcass: Remove empty egg-info directories before running meson
qemu.inc: Remove empty egg-info directories before running meson
Petr Vorel (1):
ltp: Update to 20210927
Pgowda (2):
Fix rust-native build issue when debug is enabled
rust-cross: Fix directory not deleted for race glibc vs. musl
Ralph Siemsen (1):
tar: filter CVEs using vendor name
Randy Li (1):
meson: move lang args to the right section
Richard Purdie (54):
sstatesig: Only apply group/other permissions to pseudo files
rpm: Deterministically set vendor macro entry
abi_version/sstate: Bump to fix rpm corruption issues
multilib: Avoid sysroot race issues when multilib enabled
bitbake: knotty/uihelper: Show setscene task progress in summary output
bitbake: bitbake-worker: Handle pseudo shutdown in Ctrl+C case
poky.conf: Update tested distros list with recent changes
bitbake: hashserv: Improve behaviour for better determinism/sstate reuse
poky.conf: Bump version for 3.4 honister release
build-appliance-image: Update to honister head revision
bitbake: bitbake: Bump to version 1.52.0
build-appliance-image: Update to honister head revision
layer.conf: Extend recipes not to install without explict dependencies
libxml2: Use python3targetconfig to fix reproducibility issue
libnewt: Use python3targetconfig to fix reproducibility issue
bootchart2: Don't compile python modules
linux-yocto-dev: Ensure DEPENDS matches recent 5.14 kernel changes
base/insane: Import oe.qa by default
base: Clean up unneeded len() calls
base: Use repr() for printing exceptions
bitbake.conf: Add BB_CURRENTTASK to BB_HASHEXCLUDE
reproducible_build: Drop obsolete sstate workaround
python: Update now reproducibile builds are the default
bitbake: bitbake-worker: Set BB_CURRENTTASK earlier
bitbake: compress: Allow to operate on file descriptor
bitbake: siggen: Change file format of siginfo files to use zstd compressed json
sstate: Fixes for eSDK generation after zstd switch
patch: Use repr() with exceptions instead of str()
reproducible_build: Drop now unneeded compiler warning
reproducible: Move class function code into library
reproducible: Move variable definitions to bitbake.conf
reproducible: Merge code into base.bbclass
kernel: Add KERNEL_DEBUG_TIMESTAMPS variable
reproducible: Drop BUILD_REPRODUCIBLE_BINARIES variable
kernel: Rework kernel make flag to variable mappings
oeqa: Update cleanup code to wait for hashserv exit
poky: Reproducible builds are now the default
bitbake: tests/runqueue: Ensure hashserv exits before deleting files
bitbake: bitbake-worker: Add debug when unpickle fails
bitbake: siggen: Fix type conversion issues
bitbake: test/fetch: Update urls to match upstream branch name changes
libtool: Update patchset to match those submitted upstream
staging: Fix autoconf-native rebuild failure
patch: Fix exception reporting with repr()
bitbake: fetch2/perforce: Fix typo
bitbake: bitbake: Bump to post release verion 1.53.0
poky.conf: Post release version bump
gcc: Merge three related patches together
gcc: Drop sdt (dtrace) header patch
gcc: Drop broken/unneeded patch
bitbake: tests/runqueue: Drop python version test decorators
gcc: Update patches submitted/merged upstream
gcc: Drop testsuite failure fix patch
gcc: Add missing patch Upstream-Status
Ross Burton (21):
bitbake: tests/utils: mark a regex as a raw string
bitbake: tests/fetch: prefix the FetcherTest temporary directory
bitbake: fetch2: clarify the command-no-found error message
bitbake: fetch2/gitsm: remove the 'nugget' SRCREV caching
linux-yocto: add libmpc-native to DEPENDS
bitbake: fetch2: document checkstatus API
curl: fix CVE-2021-22945 through -22947
oe/license: implement ast.NodeVisitor.visit_Constant
license.bbclass: implement ast.NodeVisitor.visit_Constant
bitbake: codegen: implement ast.NodeVisitor.visit_Constant
testimage: fix unclosed testdata file
oe/utils: log exceptions in ThreadedWorker functions
sstate: don't silently handle all exceptions in sstate_checkhashes
gawk: replace AR patch with upstreamed patch
gawk: reduce strictness of the time test
strace: remove obsolete patch
strace: remove TOOLCHAIN assignment
oeqa/runtime: load modules using importlib
oeqa/runtime: search sys.path explicitly for modules
testimage: remove target_modules_path
strace: show test suite log on failure
Sakib Sajal (1):
go: upgrade 1.16.7 -> 1.16.8
Saul Wold (3):
spdx.py: Add annotation to relationship
create-spdx: add create_annotation function
create-spdx: cross recipes are native also
Stefan Herbrechtsmeier (17):
bitbake: fetch2: npm: Support npm archives with missing search directory mode
bitbake: fetch2: npm: Create config npmrc in environment instantiation
bitbake: fetch2: npmsw: Add support for local tarball and link sources
npm: Add support for EXTRA_OENPM arguments
recipetool: Move license md5sums into CSV files
recipetool: Skip common source files in guess_license
recipetool: Change default paramter fallback_licenses of function split_pkg_licenses from None to []
recipetool: ignore empty license files
recipetool: Add logger info for missing license entries
recipetool: Add support for linenumbers to licenses.csv
recipetool: npm: Do not add package.json files to LIC_FILES_CHKSUM
recipetool: npm: Use README as license fallback
npm: Add variable NPM_NODEDIR with default value
npm: Use configs for npm environment and args for npm run command
recipetool: Rework crunch_license to recognize more variants
recipetool: Simplify common source files skip in guess_license
npm: Remove unnecessary configs argument from npm run command
Teoh Jay Shen (1):
oeqa/runtime/parselogs: modified drm error in common errors list
Thomas Perrot (1):
image_types: allow the creation of block devices on top of UBI volumes
Tim Orling (17):
ptest-runner: install -collect-system-data script
python3-hypothesis: upgrade 6.15.0 -> 6.23.2
python3-importlib-metadata: upgrade 4.6.4 -> 4.8.1
python3-more-itertools: upgrade 8.9.0 -> 8.10.0
python3-zipp: upgrade 3.5.0 -> 3.6.0
libconvert-asn1-perl: upgrade 0.31 -> 0.33
python3-pytest: upgrade 6.2.4 -> 6.2.5
at-spi2-core: upgrade 2.40.3 -> 2.42.0
python3-packaging: DEPENDS on python3-setuptools-native
python3-packaging: BBCLASSEXTEND nativesdk
python3-tomli: add recipe for 1.2.1
python3-setuptools-scm: upgrade 6.0.1 -> 6.3.2
python3-setuptools: _distutils/sysconfig fix
python3-pyyaml: upgrade 5.4.1 -> 6.0
python3-manifest: -pprint RDEPENDS on -profile
python3-hypothesis: upgrade 6.23.2 -> 6.24.0
python3-tomli: upgrade 1.2.1 -> 1.2.2
Tobias Kaufmann (1):
mount-copybind: add SELinux support
Yureka (1):
systemd: add missing include for musl
Zoltán Böszörményi (1):
libpam: Fix build with DISTRO_FEATURES usrmerge
hongxu (1):
libcap: fix nativesdk-libcap relocate failure
wangmy (20):
diffoscope: upgrade 181 -> 182
cmake: upgrade 3.21.1 -> 3.21.2
gzip: upgrade 1.10 -> 1.11
harfbuzz: upgrade 2.9.0 -> 2.9.1
vulkan-headers: upgrade 1.2.182 -> 1.2.191
vulkan-loader: upgrade 1.2.182 -> 1.2.191
vulkan-tools: upgrade 1.2.182 -> 1.2.191
help2man: upgrade 1.48.4 -> 1.48.5
python3-more-itertools: upgrade 8.8.0 -> 8.9.0
acpid: upgrade 2.0.32 -> 2.0.33
bind: upgrade 9.16.20 -> 9.16.21
createrepo-c: upgrade 0.17.4 -> 0.17.5
dnf: upgrade 4.8.0 -> 4.9.0
ell: upgrade 0.43 -> 0.44
libical: upgrade 3.0.10 -> 3.0.11
dhcpcd: upgrade 9.4.0 -> 9.4.1
dnf: upgrade 4.9.0 -> 4.10.0
file: upgrade 5.40 -> 5.41
libdnf: upgrade 0.64.0 -> 0.65.0
lttng-tools: upgrade 2.13.0 -> 2.13.1
zhengruoqin (2):
libsolv: upgrade 0.7.19 -> 0.7.20
python3-pycryptodome: upgrade 3.10.1 -> 3.11.0
meta-security: a85fbe980e..e81c15f851:
Armin Kuster (1):
python3-fail2ban: fix build failure and cleanup
Kai Kang (1):
sssd: re-package to fix QA issues
Kristian Klausen (1):
swtpm: update to 0.6.1
Liwei Song (1):
recipes-security/chipsec: platform security assessment framework
meta-openembedded: 23dc4f060f..2f6797d8d6:
Alexander Kanavin (23):
python3-yappi: add python 3.10 fix
python3-gmpy2: update 2.0.8 -> 2.1.0rc1
python3-m2crypto: address build failure with openssl 3.x
lua: remove recipe as it is now in oe-core
nghttp2: remove recipe as it is now in oe-core
kronosnet: update 1.20 -> 1.22
polkit: update 0.116 -> 0.119
openflow: disable openssl PACKAGECONFIG
openipmi: add a python 3.10 compatibility patch
strongswan: disable openssl PACKAGECONFIG
pkcs11-helper: backport a openssl 3.x patch
nodejs: use -fpermissive
nodejs: add a python 3.10 compatibility patch
php: disable openssl PACKAGECONFIG
libsigrokdecode: add a python 3.10 compatibility patch
freerdp: backport openssl 3.x patches
opensc: do not use -Werror
cfengine: blacklist due to openssl 3.x incompatibility
netplan: do not use -Werror
boinc-client: blacklist due to openssl 3.x incompatibility
ldns: blacklist due to openssl 3.x incompatibility
surf: add a webkit 2.34 compatibility patch
mozjs: update 60.9.0 -> 91.1.0
Alexander Thoma (1):
keyutils: fix install path
Armin Kuster (1):
Apache: Several CVE fixes
Chen Qi (1):
ntfs-3g-ntfsprogs: upgrade to 2021.8.22
Gianfranco (2):
vboxguestdrivers: upgrade 6.1.26 -> 6.1.28
vboxguestdrivers: Fix build failure due to the last update.
Ivan Maidanski (1):
bdwgc: upgrade 8.0.4 -> 8.0.6
Jeremy Kerr (1):
mctp: Add MCTP control utilities
Joshua Watt (2):
colord-native: Inherit pkgconfig
mutter: Move gsettings to a separate package
Justin Bronder (2):
python3-mccabe: fix LICENSE and RDEPENDS
python3-pyflakes: fix LICENSE, HOMEPAGE and RDEPENDS
Khem Raj (44):
packagegroup-meta-oe: Add lv-drivers and lvgl
python3-pystache: Remove need for python2x
python3-behave: Switch to using github src_uri
python3-simpleeval: Remove use_2to3
python3-parse-type: Do not ask for 2to3
python3-anyjson: Do not enable 2to3
python3-pybluez: Do not set 2to3
packagegroup-meta-networking: Remove nghttp2
packagegroup-meta-oe: Remove lua
gjs: Inherit pkgconfig
luaposix: Use lua 5.4
devilspie2: Switch to using github repo
devilspie2: Add missing dependency on libxinerama
kronosnet: Correct path to poll.h
luaposix: Upgrade to 35.1
xfce.bbclass: Mark string as raw in a regexp
nodejs: add -fpermissive BUILD_CXXFLAGS
pcimem: Add riscv64 into COMPATIBLE_HOST
luaposix: Depend on libxcrypt-native
libcrypt-openssl-rsa-perl: Upgrade to 0.32
xrdp: Upgrade to 0.9.17
yelp,yelp-xsl,yelp-tools: Upgrade to 41 release
mozjs: Disable JIT on mips
libcrypt-openssl-rsa-perl: Fix build with openssl3+
nodejs: Upgrade to 14.18.1
librest: Use master with libsoup3 support
gnome-online-accounts: Upgrade to 3.43.1
iwd: Fix build with musl
xrdp: Exclude from builds
xorgxrdp: Add to exclusion list for now
bluepy: Set PV and correct syntax for RDEPENDS
python3-kivy: Use new override syntax in RDEPENDS
bluepy: Fix permissions on tarball
nodejs: Upgrade to 16.11.1
mozjs: Fix build on mips/musl
mozjs: Fix musl miscompiles with HAVE_THREAD_TLS_KEYWORD
luaposix: Use virtual/crypt instread of hardcoding libxcrypt
packagegroup-meta-oe: Add libjs-jquery-globalize and libjs-jquery-cookie
mozjs: Add riscv32 support
driverctl: Rename to have PV in recipe name
tbb: Link with libatomic when using clang compiler on rv32
gimp: Disable vector icons on mips/rv32 using clang
mozjs: Update to 91.2.0
mozjs: Fix build for 32bit systems disabling JIT
Kurt Kiefer (2):
mozjs: move large static library into staticdev package
gyp: fix for compatibility with Python 3.10
Leon Anavi (6):
python3-aiohue: Upgrade 2.6.1 -> 2.6.3
python3-paho-mqtt: Upgrade 1.5.1 -> 1.6.1
python3-thrift: Upgrade 0.13.0 -> 0.15.0
python3-prompt-toolkit: Upgrade 3.0.19 -> 3.0.21
python3-traitlets: Upgrade 5.1.0 -> 5.1.1
python3-prettytable: Upgrade 2.1.0 -> 2.2.1
LiweiSong (1):
Revert "chipsec: platform security assessment framework"
Marco Cavallini (1):
bluepy_git.bb: Added recipe for BluePy Python interface to Bluetooth LE on Linux (v2)
Marek Vasut (3):
apitrace: Upgrade to latest version
apitrace: Conditionally enable X11 support
yavta: Upgrade to latest version and drop downstream patch
Martin Jansa (4):
protobuf: import a patch from meta-webosose to fix building protobuf-c with gold linker
grpc: revert GRPCPP_ABSEIL_SYNC change from 1.40.0 to fix undefined references to absl::lts_20210324::Mutex::~Mutex()
luaposix: depend on target libxcrypt instead of native
lv-lib-png: add wayland to REQUIRED_DISTRO_FEATURES
Matthias Klein (1):
gpsd: Install also the generated parts of the Python library
Matthias Schiffer (1):
byacc: switch to official HTTPS mirror
Mingli Yu (1):
opencv: remove setup_vars_opencv4.sh
Oleksandr Kravchuk (72):
iwd: update to 1.18
nano: update to 5.9
ostree: update to 2021.5
pegtl: update to 3.2.1
pmdk: update to 1.11.1
protobuf-c: update to 1.4.0
thingsboard-gateway: update to 2.8
libbpf: fix PV
libcdio-paranoia: update to 10.2+2.0.1
ttf-abyssinica: update to 2.100
ttf-dejavu: add UPSTREAM_CHECK_URI
ttf-vlgothic: update to 20200720
networkmanager: update to 1.32.12
nng: update to 1.4.0
opensaf: update to 5.21.09
python3-absl: update 0.14.1
python3-alembic: update to 1.7.4
python3-astroid: update to 2.8.2
python3-cantools: update to 36.4.0
python3-certifi: update to 2021.10.8
python3-cffi: update to 1.15.0
python3-colorlog: update to 6.5.0
python3-coverage: update to 6.0.2
python3-cryptography-vectors: update to 35.0.0
python3-dateparser: update to 1.1.0
python3-elementpath: update to 2.3.2
python3-eventlet: update to 0.32.0
python3-google-api-core: update to 2.1.1
python3-google-api-python-client: update to 2.26.1
python3-google-auth: update to 2.3.0
python3-grpcio-tools: update to 1.41.0
python3-grpcio: update to 1.41.0
python3-h2: update to 4.1.0
python3-haversine: update to 2.5.1
python3-httplib2: update to 0.20.1
python3-idna: update to 3.3
python3-iso3166: update to 2.0.2
python3-joblib: update to 1.1.0
python3-jsonrpcserver: update to 5.0.3
python3-paramiko: update to 2.8.0
python3-portion: update to 2.2.0
python3-protobuf: update to 3.18.1
python3-pulsectl: update to 21.10.4
python3-pycodestyle: update to 2.8.0
python3-pyephem: update to 4.1
python3-pyflakes: update to 2.4.0
python3-pyjwt: update to 2.2.0
python3-pykickstart: update to 3.34
python3-pyopenssl: update to 21.0.0
python3-pyperf: update to 2.3.0
python3-pytest-timeout: update 2.0.1
python3-pytz: update to 2021.3
python3-regex: update to 2021.10.8
python3-sentry-sdk: update to 1.4.3
python3-sympy: udpate to 1.9
python3-twitter: update to 4.1.0
python3-uritemplate: update to 4.1.1
python3-websockets: update to 10.0
python3-wrapt: update to 1.13.2
python3-xlsxwriter: update to 3.0.1
python3-xmlschema: update to 1.8.0
python3-yarl: update to 1.7.0
python3-typeguard: update to 2.13.0
python3-pyatspi: update to 2.38.1
python3-h5py: update to 3.5.0
python3-pybind11-json: update to 0.2.11
python3-pychromecast: update to 9.3.1
python3-tzlocal: update to 4.0.1
python3-zeroconf: update to 0.36.9
leptonica: update to 1.82.0
redis-plus-plus: update to 1.3.2
hiredis: update to 1.0.2
Peter Bergin (3):
pipewire: remove manpages class
pipewire: also handle pipewire-media-session in systemd class
pipewire: rework PACKAGECONFIG for systemd service files
Philippe Coval (5):
lvgl: Add recipe for Lightweight Graphics Library
lv-drivers: Add recipe for lvgl lib
lv-lib-png: Add recipe for LVGL for handling PNG format
lvgl: Add lv_lib_png to packagegroup
lvgl: Lint recipe
Roland Hieber (1):
rapidjson: override hard-coded lib install dir
Shiping Ji (1):
Add recipe for driverctl
Tim Orling (6):
unicode-ucd: upgrade 12.1.0 -> 14.0.0
gnome-screenshot: add recipe for 40.0
libgweather: upgrade 3.36.2 -> 40.0
colord: inherit pkgconfig
gfbgraph: patch to build with latest rest
gnome-calendar: upgrade 3.38.1 -> 41.0
Trevor Gamblin (3):
python3-posix-ipc: Add recipe for version 1.0.5
python3-pyinotify: Add fcntl, logging to RDEPENDS
python3-cvxopt: upgrade 1.2.6 -> 1.2.7
Vyacheslav Yurkov (3):
grpc: fix cross-compilation of grpc applications
grpc: fix cross-compilation of grpc applications
grpc: upgrade 1.38.1 -> 1.41.0
Wang Mingyu (1):
poppler: upgrade 21.09.0 -> 21.10.0
Yi Zhao (3):
samba: upgrade 4.14.7 -> 4.14.8
audit: upgrade 3.0.5 -> 3.0.6
strongswan: upgrade 5.9.3 -> 5.9.4
Zoltán Böszörményi (1):
python3-jsmin: Upgrade to version 3.0.0
wangmy (11):
openvpn: upgrade 2.5.3 -> 2.5.4
redis: upgrade 6.2.5 -> 6.2.6
span-lite: upgrade 0.10.1 -> 0.10.3
bdwgc: upgrade 8.0.6 -> 8.2.0
icewm: upgrade 2.7.0 -> 2.8.0
ifenslave: upgrade 2.12 -> 2.13
asio: upgrade 1.18.1.bb -> 1.20.0
libgusb: upgrade 0.3.7 -> 0.3.8
libxmlb: upgrade 0.3.2 -> 0.3.3
xdebug: upgrade 2.9.5 -> 3.1.1
cryptsetup: upgrade 2.3.6 -> 2.4.1
zangrc (25):
python3-ipython: upgrade 7.27.0 -> 7.28.0
python3-jdatetime: upgrade 3.6.2 -> 3.6.4
python3-multidict: upgrade 5.1.0 -> 5.2.0
python3-openpyxl: upgrade 3.0.8 -> 3.0.9
python3-pyscaffold: upgrade 4.0.2 -> 4.1
python3-transitions: upgrade 0.8.9 -> 0.8.10
networkmanager-openvpn: upgrade 1.8.14 -> 1.8.16
ser2net: upgrade 4.3.3 -> 4.3.4
python3-humanize: upgrade 3.11.0 -> 3.12.0
python3-nmap: upgrade 1.5.0 -> 1.5.1
libjs-jquery-cookie: Add recipe
libjs-jquery-globalize: Add recipe
python3-cachetools: upgrade 4.2.2 -> 4.2.4
python3-cbor2: upgrade 5.4.1 -> 5.4.2
python3-click: upgrade 8.0.1 -> 8.0.3
python3-configargparse : upgrade 1.5.2 -> 1.5.3
python3-flask: upgrade 2.0.1 -> 2.0.2
python3-pyscaffold: upgrade 4.1 -> 4.1.1
python3-werkzeug: upgrade 2.0.1 -> 2.0.2
python3-absl: upgrade 0.14.1 -> 0.15.0
python3-pandas: upgrade 1.3.3 -> 1.3.4
python3-pulsectl: upgrade 21.10.4 -> 21.10.5
python3-pyjwt: upgrade 2.2.0 -> 2.3.0
python3-pytest-asyncio: upgrade 0.15.1 -> 0.16.0
python3-robotframework: upgrade 4.1.1 -> 4.1.2
zhengruoqin (15):
python3-ujson: upgrade 4.1.0 -> 4.2.0
python3-urllib3: upgrade 1.26.6 -> 1.26.7
python3-watchdog: upgrade 2.1.5 -> 2.1.6
gensio: upgrade 2.2.9 -> 2.3.1
nlohmann-json: upgrade 3.10.2 -> 3.10.4
libencode-perl: upgrade 3.12 -> 3.16
python3-socketio: upgrade 5.4.0 -> 5.4.1
python3-sqlalchemy: upgrade 1.4.23 -> 1.4.26
python3-stevedore: upgrade 3.4.0 -> 3.5.0
autofs: upgrade 5.1.7 -> 5.1.8
links: upgrade 2.22 -> 2.25
atftp: upgrade 0.7.4 -> 0.7.5
python3-gmqtt: upgrade 0.6.10 -> 0.6.11
python3-google-api-python-client: upgrade 2.26.1 -> 2.27.0
python3-greenlet: upgrade 1.1.1 -> 1.1.2
meta-raspberrypi: 9eb4879cf4..90b3ac6fb3:
Zygmunt Krynicki (1):
rpi-config: warn on config.txt lines exceeding 80 bytes
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: I9e75d5bd606a913fbe69e6735c9ecafc436441ba
diff --git a/poky/meta/recipes-devtools/libtool/libtool/0001-ltmain.in-Handle-trailing-slashes-on-install-command.patch b/poky/meta/recipes-devtools/libtool/libtool/0001-ltmain.in-Handle-trailing-slashes-on-install-command.patch
new file mode 100644
index 0000000..eeb5ebf
--- /dev/null
+++ b/poky/meta/recipes-devtools/libtool/libtool/0001-ltmain.in-Handle-trailing-slashes-on-install-command.patch
@@ -0,0 +1,35 @@
+From: Richard Purdie <richard.purdie@linuxfoundation.org>
+Subject: [PATCH 01/12] ltmain.in: Handle trailing slashes on install commands correctly
+
+A command like:
+
+libtool --mode=install /usr/bin/install -c gck-roots-store-standalone.la '/image/usr/lib/gnome-keyring/standalone/'
+
+where the path ends with a trailing slash currently fails. This occurs in
+software like gnome-keyring or pulseaudio and is because the comparision
+code doesn't see the paths as equal. Strip both paths to ensure this works
+reliably.
+
+Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
+
+Upstream-Status: Submitted [https://lists.gnu.org/archive/html/libtool-patches/2021-10/msg00010.html]
+
+diff --git a/build-aux/ltmain.in b/build-aux/ltmain.in
+--- a/build-aux/ltmain.in
++++ b/build-aux/ltmain.in
+@@ -2356,8 +2356,14 @@ func_mode_install ()
+ func_append dir "$objdir"
+
+ if test -n "$relink_command"; then
++ # Strip any trailing slash from the destination.
++ func_stripname '' '/' "$libdir"
++ destlibdir=$func_stripname_result
++ func_stripname '' '/' "$destdir"
++ s_destdir=$func_stripname_result
++
+ # Determine the prefix the user has applied to our future dir.
+- inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
++ inst_prefix_dir=`$ECHO "X$s_destdir" | $Xsed -e "s%$destlibdir\$%%"`
+
+ # Don't allow the user to place us outside of our expected
+ # location b/c this prevents finding dependent libraries that
diff --git a/poky/meta/recipes-devtools/libtool/libtool/rename-with-sysroot.patch b/poky/meta/recipes-devtools/libtool/libtool/0002-libtool.m4-Rename-the-with-sysroot-option-to-avoid-c.patch
similarity index 90%
rename from poky/meta/recipes-devtools/libtool/libtool/rename-with-sysroot.patch
rename to poky/meta/recipes-devtools/libtool/libtool/0002-libtool.m4-Rename-the-with-sysroot-option-to-avoid-c.patch
index ad2b110..6da2839 100644
--- a/poky/meta/recipes-devtools/libtool/libtool/rename-with-sysroot.patch
+++ b/poky/meta/recipes-devtools/libtool/libtool/0002-libtool.m4-Rename-the-with-sysroot-option-to-avoid-c.patch
@@ -1,16 +1,17 @@
-Upstream-Status: Pending
+From: Khem Raj <raj.khem@gmail.com>
+Subject: [PATCH 02/12] libtool.m4: Rename the --with-sysroot option to avoid conflict with gcc/binutils
This patch renames the --with-sysroot option to --with-libtool-sysroot
to avoid namespace conflict with binutils, gcc and other toolchain
-components.
+components since these componets also add that option to configure
+and this becomes confusing and conflicting otherwise.
-I also reported the problem to libtool here
+Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
+Upstream report:
http://lists.gnu.org/archive/html/libtool/2010-10/msg00048.html
--Khem Raj <raj.khem@gmail.com>
-
-Updated by: Robert Yang <liezhi.yang@windriver.com>
+Upstream-Status: Submitted [https://lists.gnu.org/archive/html/libtool-patches/2021-10/msg00014.html]
diff --git a/m4/libtool.m4 b/m4/libtool.m4
--- a/m4/libtool.m4
diff --git a/poky/meta/recipes-devtools/libtool/libtool/use-sysroot-in-libpath.patch b/poky/meta/recipes-devtools/libtool/libtool/0003-ltmain.in-Add-missing-sysroot-to-library-path.patch
similarity index 63%
rename from poky/meta/recipes-devtools/libtool/libtool/use-sysroot-in-libpath.patch
rename to poky/meta/recipes-devtools/libtool/libtool/0003-ltmain.in-Add-missing-sysroot-to-library-path.patch
index 6af99f3..0103a00 100644
--- a/poky/meta/recipes-devtools/libtool/libtool/use-sysroot-in-libpath.patch
+++ b/poky/meta/recipes-devtools/libtool/libtool/0003-ltmain.in-Add-missing-sysroot-to-library-path.patch
@@ -1,12 +1,14 @@
-Upstream-Status: Pending
+From: Khem Raj <raj.khem@gmail.com>
+Subject: [PATCH 03/12] ltmain.in: Add missing sysroot to library path
-When using sysroot we should append it to libdir, which is helpful in
+When using a sysroot we should append it to libdir, which is helpful in
cross builds as the system is staged in the sysroot. For normal builds,
i.e. when lt_sysroot is not set, it will still behave the same and add
-L/usr/lib to the relink command.
--Khem Raj <raj.khem@gmail.com>
-Updated by: Robert Yang <liezhi.yang@windriver.com>
+Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
+
+Upstream-Status: Submitted [https://lists.gnu.org/archive/html/libtool-patches/2021-10/msg00017.html]
diff --git a/build-aux/ltmain.in b/build-aux/ltmain.in
--- a/build-aux/ltmain.in
diff --git a/poky/meta/recipes-devtools/libtool/libtool/fix-final-rpath.patch b/poky/meta/recipes-devtools/libtool/libtool/0004-ltmain.sh-Fix-sysroot-paths-being-encoded-into-RPATH.patch
similarity index 74%
rename from poky/meta/recipes-devtools/libtool/libtool/fix-final-rpath.patch
rename to poky/meta/recipes-devtools/libtool/libtool/0004-ltmain.sh-Fix-sysroot-paths-being-encoded-into-RPATH.patch
index 5c9f8cc..21b3dfe 100644
--- a/poky/meta/recipes-devtools/libtool/libtool/fix-final-rpath.patch
+++ b/poky/meta/recipes-devtools/libtool/libtool/0004-ltmain.sh-Fix-sysroot-paths-being-encoded-into-RPATH.patch
@@ -1,13 +1,13 @@
-Upstream-Status: Inappropriate [embedded specific]
+From: Richard Purdie <richard.purdie@linuxfoundation.org>
+Subject: [PATCH 04/12] ltmain.sh: Fix sysroot paths being encoded into RPATHs
-Enalbing sysroot support exposed a bug where the final library
-had an RPATH encoded into it which still pointed to the sysroot.
-This works around the issue until it gets sorted out upstream.
+There is a bug where RPATHs could end up containing sysroot values when
+cross compiling which is obviously incorrect. Strip out sysroot components
+from libdir when building RPATH values to avoid this.
-Fix suggested by Richard Purdie <richard.purdie@intel.com>
-Signed-off-by: Scott Garman <scott.a.garman@intel.com>
-Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
-Updated by: Robert Yang <liezhi.yang@windriver.com>
+Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
+
+Upstream-Status: Submitted [https://lists.gnu.org/archive/html/libtool-patches/2021-10/msg00009.html]
diff --git a/build-aux/ltmain.in b/build-aux/ltmain.in
--- a/build-aux/ltmain.in
diff --git a/poky/meta/recipes-devtools/libtool/libtool/0005-ltmain.in-Don-t-encode-RATHS-which-match-default-lin.patch b/poky/meta/recipes-devtools/libtool/libtool/0005-ltmain.in-Don-t-encode-RATHS-which-match-default-lin.patch
new file mode 100644
index 0000000..50d47d9
--- /dev/null
+++ b/poky/meta/recipes-devtools/libtool/libtool/0005-ltmain.in-Don-t-encode-RATHS-which-match-default-lin.patch
@@ -0,0 +1,72 @@
+From: Richard Purdie <richard.purdie@linuxfoundation.org>
+Subject: [PATCH 05/12] ltmain.in: Don't encode RATHS which match default linker paths
+
+We don't want to add RPATHS which match default linker search paths, they're
+a waste of space. This patch filters libtools list of paths to encoode and
+removes the ones we don't need.
+
+Libtool may be passed link paths of the form "/usr/lib/../lib" so normalize
+the paths before comparision.
+
+Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
+
+Upstream-Status: Submitted [https://lists.gnu.org/archive/html/libtool-patches/2021-10/msg00013.html]
+
+diff -u b/build-aux/ltmain.in b/build-aux/ltmain.in
+--- b/build-aux/ltmain.in
++++ b/build-aux/ltmain.in 2012-08-22 11:01:34.191345989 -0700
+@@ -7286,8 +7286,16 @@
+ esac
+ fi
+ else
+- eval flag=\"$hardcode_libdir_flag_spec\"
+- func_append dep_rpath " $flag"
++ # We only want to hardcode in an rpath if it isn't in the
++ # default dlsearch path.
++ func_normal_abspath "$libdir"
++ libdir_norm=$func_normal_abspath_result
++ case " $sys_lib_dlsearch_path " in
++ *" $libdir_norm "*) ;;
++ *) eval flag=\"$hardcode_libdir_flag_spec\"
++ func_append dep_rpath " $flag"
++ ;;
++ esac
+ fi
+ elif test -n "$runpath_var"; then
+ case "$perm_rpath " in
+@@ -8019,8 +8027,16 @@
+ esac
+ fi
+ else
+- eval flag=\"$hardcode_libdir_flag_spec\"
+- func_append rpath " $flag"
++ # We only want to hardcode in an rpath if it isn't in the
++ # default dlsearch path.
++ func_normal_abspath "$libdir"
++ libdir_norm=$func_normal_abspath_result
++ case " $sys_lib_dlsearch_path " in
++ *" $libdir_norm "*) ;;
++ *) eval flag=\"$hardcode_libdir_flag_spec\"
++ rpath+=" $flag"
++ ;;
++ esac
+ fi
+ elif test -n "$runpath_var"; then
+ case "$perm_rpath " in
+@@ -8070,8 +8086,14 @@
+ esac
+ fi
+ else
+- eval flag=\"$hardcode_libdir_flag_spec\"
+- func_append rpath " $flag"
++ # We only want to hardcode in an rpath if it isn't in the
++ # default dlsearch path.
++ case " $sys_lib_dlsearch_path " in
++ *" $libdir "*) ;;
++ *) eval flag=\"$hardcode_libdir_flag_spec\"
++ func_append rpath " $flag"
++ ;;
++ esac
+ fi
+ elif test -n "$runpath_var"; then
+ case "$finalize_perm_rpath " in
diff --git a/poky/meta/recipes-devtools/libtool/libtool/fix-resolve-lt-sysroot.patch b/poky/meta/recipes-devtools/libtool/libtool/0006-libtool.m4-Handle-as-a-sysroot-correctly.patch
similarity index 60%
rename from poky/meta/recipes-devtools/libtool/libtool/fix-resolve-lt-sysroot.patch
rename to poky/meta/recipes-devtools/libtool/libtool/0006-libtool.m4-Handle-as-a-sysroot-correctly.patch
index 1bd9598..9999712 100644
--- a/poky/meta/recipes-devtools/libtool/libtool/fix-resolve-lt-sysroot.patch
+++ b/poky/meta/recipes-devtools/libtool/libtool/0006-libtool.m4-Handle-as-a-sysroot-correctly.patch
@@ -1,16 +1,18 @@
-Upstream-Status: Pending
+From: Richard Purdie <richard.purdie@linuxfoundation.org>
+Subject: [PATCH 06/12] libtool.m4: Handle "/" as a sysroot correctly
-This patch updates libtool.m4 (and its output) to resolve a problem
-with variable 'lt_sysroot' not being properly updated if the option
-'--with[-libtool]-sysroot' is not provided when running the 'configure'
-script for a package.
+Update libtool.m4 to resolve a problem with lt_sysroot not being properly
+updated if the option '--with[-libtool]-sysroot' is not provided when
+running the 'configure' script for a package so that "/" as a sysroot
+is handled correctly by libtool.
-I have also reported the problem to libtool here
+Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
+Upstream Report:
http://lists.gnu.org/archive/html/bug-libtool/2013-09/msg00005.html
-Signed-off-by: Hans Beckerus <hans.beckerus at gmail.com>
-Updated by: Robert Yang <liezhi.yang@windriver.com>
+Upstream-Status: Submitted [https://lists.gnu.org/archive/html/libtool-patches/2021-10/msg00018.html]
+
---
diff --git a/m4/libtool.m4 b/m4/libtool.m4
--- a/m4/libtool.m4
diff --git a/poky/meta/recipes-devtools/libtool/libtool/0001-libtool-Fix-support-for-NIOS2-processor.patch b/poky/meta/recipes-devtools/libtool/libtool/0007-libtool-Fix-support-for-NIOS2-processor.patch
similarity index 91%
rename from poky/meta/recipes-devtools/libtool/libtool/0001-libtool-Fix-support-for-NIOS2-processor.patch
rename to poky/meta/recipes-devtools/libtool/libtool/0007-libtool-Fix-support-for-NIOS2-processor.patch
index bbd36d8..395464e 100644
--- a/poky/meta/recipes-devtools/libtool/libtool/0001-libtool-Fix-support-for-NIOS2-processor.patch
+++ b/poky/meta/recipes-devtools/libtool/libtool/0007-libtool-Fix-support-for-NIOS2-processor.patch
@@ -1,7 +1,5 @@
-From df2cd898e48208f26320d40c3ed6b19c75c27142 Mon Sep 17 00:00:00 2001
From: Marek Vasut <marex@denx.de>
-Date: Thu, 17 Sep 2015 00:43:15 +0200
-Subject: [PATCH] libtool: Fix support for NIOS2 processor
+Subject: [PATCH 07/12] libtool: Fix support for NIOS2 processor
The name of the system contains the string "nios2". This string
is caught by the some of the greedy checks for OS/2 in libtool,
@@ -13,7 +11,10 @@
as well.
Signed-off-by: Marek Vasut <marex@denx.de>
-Upstream-Status: Submitted
+Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
+
+Upstream-Status: Submitted [https://lists.gnu.org/archive/html/libtool-patches/2021-10/msg00021.html]
+
---
build-aux/ltmain.in | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/poky/meta/recipes-devtools/libtool/libtool/0001-libtool-Check-for-static-libs-for-internal-compiler-.patch b/poky/meta/recipes-devtools/libtool/libtool/0008-libtool-Check-for-static-libs-for-internal-compiler-.patch
similarity index 72%
rename from poky/meta/recipes-devtools/libtool/libtool/0001-libtool-Check-for-static-libs-for-internal-compiler-.patch
rename to poky/meta/recipes-devtools/libtool/libtool/0008-libtool-Check-for-static-libs-for-internal-compiler-.patch
index 8c7c39f..afffdb9 100644
--- a/poky/meta/recipes-devtools/libtool/libtool/0001-libtool-Check-for-static-libs-for-internal-compiler-.patch
+++ b/poky/meta/recipes-devtools/libtool/libtool/0008-libtool-Check-for-static-libs-for-internal-compiler-.patch
@@ -1,8 +1,7 @@
-From 40a2da75e6d95cc7c498ebda95ab19ae0db2ebfb Mon Sep 17 00:00:00 2001
+From b9993338080325a6e2b2ec94ca0ece80e7fa3fb6 Mon Sep 17 00:00:00 2001
From: Khem Raj <raj.khem@gmail.com>
Date: Sat, 26 Jan 2019 12:54:26 -0800
-Subject: [PATCH] libtool: Check for static libs for internal compiler
- libraries
+Subject: [PATCH 08/12] libtool: Check for static libs for internal compiler libraries
Libtool checks only for libraries linked as -l* when trying to
find internal compiler libraries. Clang, however uses the absolute
@@ -10,11 +9,13 @@
handles clang's statically linked libraries when finding internal
compiler libraries.
-https://crbug.com/749263
-
-Upstream-Status: Submitted [https://debbugs.gnu.org/cgi/bugreport.cgi?bug=27866]
-
Signed-off-by: Khem Raj <raj.khem@gmail.com>
+Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
+
+https://crbug.com/749263
+https://debbugs.gnu.org/cgi/bugreport.cgi?bug=27866
+
+Upstream-Status: Submitted [https://lists.gnu.org/archive/html/libtool-patches/2021-10/msg00016.html]
---
m4/libtool.m4 | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/poky/meta/recipes-devtools/libtool/libtool/0001-Makefile.am-make-sure-autoheader-run-before-autoconf.patch b/poky/meta/recipes-devtools/libtool/libtool/0009-Makefile.am-make-sure-autoheader-run-before-autoconf.patch
similarity index 79%
rename from poky/meta/recipes-devtools/libtool/libtool/0001-Makefile.am-make-sure-autoheader-run-before-autoconf.patch
rename to poky/meta/recipes-devtools/libtool/libtool/0009-Makefile.am-make-sure-autoheader-run-before-autoconf.patch
index 2e99087..348cd3c 100644
--- a/poky/meta/recipes-devtools/libtool/libtool/0001-Makefile.am-make-sure-autoheader-run-before-autoconf.patch
+++ b/poky/meta/recipes-devtools/libtool/libtool/0009-Makefile.am-make-sure-autoheader-run-before-autoconf.patch
@@ -1,7 +1,5 @@
-From dfbbbd359e43e0a55fbea06f2647279ad8761cb9 Mon Sep 17 00:00:00 2001
From: Mingli Yu <mingli.yu@windriver.com>
-Date: Wed, 24 Mar 2021 03:04:13 +0000
-Subject: [PATCH] Makefile.am: make sure autoheader run before autoconf
+Subject: [PATCH 09/12] Makefile.am: make sure autoheader run before autoconf
autoheader will update ../libtool-2.4.6/libltdl/config-h.in which
autoconf needs, so there comes a race sometimes as below:
@@ -10,9 +8,11 @@
So make sure autoheader run before autoconf to avoid this race.
-Upstream-Status: Submitted [libtool-patches@gnu.org maillist]
-
Signed-off-by: Mingli Yu <mingli.yu@windriver.com>
+Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
+
+Upstream-Status: Submitted [https://lists.gnu.org/archive/html/libtool-patches/2021-10/msg00015.html]
+
---
Makefile.am | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/poky/meta/recipes-devtools/libtool/libtool/0001-Makefile.am-make-sure-autoheader-run-before-automake.patch b/poky/meta/recipes-devtools/libtool/libtool/0010-Makefile.am-make-sure-autoheader-run-before-automake.patch
similarity index 75%
rename from poky/meta/recipes-devtools/libtool/libtool/0001-Makefile.am-make-sure-autoheader-run-before-automake.patch
rename to poky/meta/recipes-devtools/libtool/libtool/0010-Makefile.am-make-sure-autoheader-run-before-automake.patch
index 87f8492..cd963ef 100644
--- a/poky/meta/recipes-devtools/libtool/libtool/0001-Makefile.am-make-sure-autoheader-run-before-automake.patch
+++ b/poky/meta/recipes-devtools/libtool/libtool/0010-Makefile.am-make-sure-autoheader-run-before-automake.patch
@@ -1,7 +1,5 @@
-From e82c06584f02e3e4487aa73aa05981e2a35dc6d1 Mon Sep 17 00:00:00 2001
From: Mingli Yu <mingli.yu@windriver.com>
-Date: Tue, 13 Apr 2021 07:17:29 +0000
-Subject: [PATCH] Makefile.am: make sure autoheader run before automake
+Subject: [PATCH 10/12] Makefile.am: make sure autoheader run before automake
When use automake to generate Makefile.in from Makefile.am, there
comes below race:
@@ -10,7 +8,10 @@
It is because the file config-h.in in updating process by autoheader,
so make automake run after autoheader to avoid the above race.
-Upstream-Status: Submitted [libtool-patches@gnu.org maillist]
+Signed-off-by: Mingli Yu <mingli.yu@windriver.com>
+Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
+
+Upstream-Status: Submitted [https://lists.gnu.org/archive/html/libtool-patches/2021-10/msg00020.html]
Signed-off-by: Mingli Yu <mingli.yu@windriver.com>
---
diff --git a/poky/meta/recipes-devtools/libtool/libtool/lto-prefix.patch b/poky/meta/recipes-devtools/libtool/libtool/0011-ltmain.in-Handle-prefix-map-compiler-options-correct.patch
similarity index 82%
rename from poky/meta/recipes-devtools/libtool/libtool/lto-prefix.patch
rename to poky/meta/recipes-devtools/libtool/libtool/0011-ltmain.in-Handle-prefix-map-compiler-options-correct.patch
index 2bd010b..b121a3c 100644
--- a/poky/meta/recipes-devtools/libtool/libtool/lto-prefix.patch
+++ b/poky/meta/recipes-devtools/libtool/libtool/0011-ltmain.in-Handle-prefix-map-compiler-options-correct.patch
@@ -1,9 +1,13 @@
+From: Richard Purdie <richard.purdie@linuxfoundation.org>
+Subject: [PATCH 11/12] ltmain.in: Handle prefix-map compiler options correctly
+
If lto is enabled, we need the prefix-map variables to be passed to the linker.
Add these to the list of options libtool passes through.
-Upstream-Status: Pending
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
+Upstream-Status: Submitted [https://lists.gnu.org/archive/html/libtool-patches/2021-10/msg00019.html]
+
Index: libtool-2.4.6/build-aux/ltmain.in
===================================================================
--- libtool-2.4.6.orig/build-aux/ltmain.in
diff --git a/poky/meta/recipes-devtools/libtool/libtool/0012-libtool.m4-For-reproducibility-stop-encoding-hostnam.patch b/poky/meta/recipes-devtools/libtool/libtool/0012-libtool.m4-For-reproducibility-stop-encoding-hostnam.patch
new file mode 100644
index 0000000..64f911d
--- /dev/null
+++ b/poky/meta/recipes-devtools/libtool/libtool/0012-libtool.m4-For-reproducibility-stop-encoding-hostnam.patch
@@ -0,0 +1,27 @@
+From: Richard Purdie <richard.purdie@linuxfoundation.org>
+Subject: [PATCH 12/12] libtool.m4: For reproducibility stop encoding hostname in libtool script
+
+For reproducibilty, stop encoding the hostname into the libtool script, this isn't
+really adding much to debugging and most distros are carrying such a patch now as
+reproducibility is important.
+
+Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
+
+https://sources.debian.org/data/main/libt/libtool/2.4.6-10/debian/patches/
+ no_hostname.patch
+
+Upstream-Status: Submitted [https://lists.gnu.org/archive/html/libtool-patches/2021-10/msg00011.html]
+
+---
+Index: libtool-2.4.6/m4/libtool.m4
+===================================================================
+--- libtool-2.4.6.orig/m4/libtool.m4
++++ libtool-2.4.6/m4/libtool.m4
+@@ -728,7 +728,6 @@ _LT_CONFIG_SAVE_COMMANDS([
+ cat <<_LT_EOF >> "$cfgfile"
+ #! $SHELL
+ # Generated automatically by $as_me ($PACKAGE) $VERSION
+-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+ # NOTE: Changes made to this file will be lost: look at ltmain.sh.
+
+ # Provide generalized library-building support services.
diff --git a/poky/meta/recipes-devtools/libtool/libtool/debian-no_hostname.patch b/poky/meta/recipes-devtools/libtool/libtool/debian-no_hostname.patch
deleted file mode 100755
index 5add0cc..0000000
--- a/poky/meta/recipes-devtools/libtool/libtool/debian-no_hostname.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-libtool: remove host specific info from header file
-
-https://sources.debian.org/data/main/libt/libtool/2.4.6-10/debian/patches/
- no_hostname.patch
-
-Upstream-Status: Inappropriate [not author]
-Signed-off-by: Joe Slater <joe.slater@windriver.com>
-
----
-Index: libtool-2.4.6/m4/libtool.m4
-===================================================================
---- libtool-2.4.6.orig/m4/libtool.m4
-+++ libtool-2.4.6/m4/libtool.m4
-@@ -728,7 +728,6 @@ _LT_CONFIG_SAVE_COMMANDS([
- cat <<_LT_EOF >> "$cfgfile"
- #! $SHELL
- # Generated automatically by $as_me ($PACKAGE) $VERSION
--# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
- # NOTE: Changes made to this file will be lost: look at ltmain.sh.
-
- # Provide generalized library-building support services.
diff --git a/poky/meta/recipes-devtools/libtool/libtool/fix-rpath.patch b/poky/meta/recipes-devtools/libtool/libtool/fix-rpath.patch
deleted file mode 100644
index a2ec947..0000000
--- a/poky/meta/recipes-devtools/libtool/libtool/fix-rpath.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-We don't want to add RPATHS which match default linker
-search paths, they're a waste of space. This patch
-filters libtools list and removes the ones we don't need.
-
-RP 23/9/2011
-
-Upstream-Status: Pending
-
-Updated by: Robert Yang <liezhi.yang@windriver.com>
-
-Index: libtool-2.4.2/build-aux/ltmain.in
-===================================================================
---- libtool-2.4.2.orig/build-aux/ltmain.in
-+++ libtool-2.4.2/build-aux/ltmain.in
-@@ -7286,8 +7286,14 @@ EOF
- esac
- fi
- else
-- eval flag=\"$hardcode_libdir_flag_spec\"
-- func_append dep_rpath " $flag"
-+ # We only want to hardcode in an rpath if it isn't in the
-+ # default dlsearch path.
-+ case " $sys_lib_dlsearch_path " in
-+ *" $libdir "*) ;;
-+ *) eval flag=\"$hardcode_libdir_flag_spec\"
-+ func_append dep_rpath " $flag"
-+ ;;
-+ esac
- fi
- elif test -n "$runpath_var"; then
- case "$perm_rpath " in
-@@ -8019,8 +8025,14 @@ EOF
- esac
- fi
- else
-- eval flag=\"$hardcode_libdir_flag_spec\"
-- func_append rpath " $flag"
-+ # We only want to hardcode in an rpath if it isn't in the
-+ # default dlsearch path.
-+ case " $sys_lib_dlsearch_path " in
-+ *" $libdir "*) ;;
-+ *) eval flag=\"$hardcode_libdir_flag_spec\"
-+ rpath+=" $flag"
-+ ;;
-+ esac
- fi
- elif test -n "$runpath_var"; then
- case "$perm_rpath " in
-@@ -8070,8 +8082,14 @@ EOF
- esac
- fi
- else
-- eval flag=\"$hardcode_libdir_flag_spec\"
-- func_append rpath " $flag"
-+ # We only want to hardcode in an rpath if it isn't in the
-+ # default dlsearch path.
-+ case " $sys_lib_dlsearch_path " in
-+ *" $libdir "*) ;;
-+ *) eval flag=\"$hardcode_libdir_flag_spec\"
-+ func_append rpath " $flag"
-+ ;;
-+ esac
- fi
- elif test -n "$runpath_var"; then
- case "$finalize_perm_rpath " in
diff --git a/poky/meta/recipes-devtools/libtool/libtool/fixinstall.patch b/poky/meta/recipes-devtools/libtool/libtool/fixinstall.patch
index 8f343bf..48330d8 100644
--- a/poky/meta/recipes-devtools/libtool/libtool/fixinstall.patch
+++ b/poky/meta/recipes-devtools/libtool/libtool/fixinstall.patch
@@ -27,9 +27,9 @@
- if test -n "$relink_command"; then
+ if test "$fast_install" = no && test -n "$relink_command"; then
- # Strip any trailing slash from the destination.
- func_stripname '' '/' "$libdir"
- destlibdir=$func_stripname_result
+ # Strip any trailing slash from the destination.
+ func_stripname '' '/' "$libdir"
+ destlibdir=$func_stripname_result
@@ -2394,7 +2394,7 @@ func_mode_install ()
shift
diff --git a/poky/meta/recipes-devtools/libtool/libtool/norm-rpath.patch b/poky/meta/recipes-devtools/libtool/libtool/norm-rpath.patch
deleted file mode 100644
index 1e4c65e..0000000
--- a/poky/meta/recipes-devtools/libtool/libtool/norm-rpath.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-libtool: normalize link paths before considering for RPATH
-
-Libtool may be passed link paths of the form "/usr/lib/../lib", which
-fool its detection code into thinking it should be included as an
-RPATH in the generated binary. Normalize before comparision.
-
-Signed-off-by: Andy Ross <andy.ross@windriver.com>
-Upstream-Status: Pending
-
-Updated by: Robert Yang <liezhi.yang@windriver.com>
-
-diff -ur a/build-aux/ltmain.in b/build-aux/ltmain.in
---- a/build-aux/ltmain.in 2012-08-16 13:58:55.058900363 -0700
-+++ b/build-aux/ltmain.in 2012-08-22 11:01:34.191345989 -0700
-@@ -7288,8 +7288,10 @@
- else
- # We only want to hardcode in an rpath if it isn't in the
- # default dlsearch path.
-+ func_normal_abspath "$libdir"
-+ libdir_norm=$func_normal_abspath_result
- case " $sys_lib_dlsearch_path " in
-- *" $libdir "*) ;;
-+ *" $libdir_norm "*) ;;
- *) eval flag=\"$hardcode_libdir_flag_spec\"
- func_append dep_rpath " $flag"
- ;;
-@@ -8027,8 +8029,10 @@
- else
- # We only want to hardcode in an rpath if it isn't in the
- # default dlsearch path.
-+ func_normal_abspath "$libdir"
-+ libdir_norm=$func_normal_abspath_result
- case " $sys_lib_dlsearch_path " in
-- *" $libdir "*) ;;
-+ *" $libdir_norm "*) ;;
- *) eval flag=\"$hardcode_libdir_flag_spec\"
- rpath+=" $flag"
- ;;
diff --git a/poky/meta/recipes-devtools/libtool/libtool/trailingslash.patch b/poky/meta/recipes-devtools/libtool/libtool/trailingslash.patch
deleted file mode 100644
index e8824d7..0000000
--- a/poky/meta/recipes-devtools/libtool/libtool/trailingslash.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-Upstream-Status: Pending
-
-A command like /bin/sh ../../i586-poky-linux-libtool --mode=install /usr/bin/install -c gck-roots-store-standalone.la '/media/data1/builds/poky1/tmp/work/core2-poky-linux/gnome-keyring-2.26.1-r1/image/usr/lib/gnome-keyring/standalone/' fails (e.g. gnome-keyring or pulseaudio)
-
-This is because libdir has a trailing slash which breaks the comparision.
-
-RP 2/1/10
-
-Merged a patch received from Gary Thomas <gary@mlbassoc.com>
-
-Date: 2010/07/12
-Nitin A Kamble <nitin.a.kamble@intel.com>
-
-Updated by: Robert Yang <liezhi.yang@windriver.com>
-
-diff --git a/build-aux/ltmain.in b/build-aux/ltmain.in
---- a/build-aux/ltmain.in
-+++ b/build-aux/ltmain.in
-@@ -2356,8 +2356,15 @@ func_mode_install ()
- func_append dir "$objdir"
-
- if test -n "$relink_command"; then
-+ # Strip any trailing slash from the destination.
-+ func_stripname '' '/' "$libdir"
-+ destlibdir=$func_stripname_result
-+
-+ func_stripname '' '/' "$destdir"
-+ s_destdir=$func_stripname_result
-+
- # Determine the prefix the user has applied to our future dir.
-- inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
-+ inst_prefix_dir=`$ECHO "X$s_destdir" | $Xsed -e "s%$destlibdir\$%%"`
-
- # Don't allow the user to place us outside of our expected
- # location b/c this prevents finding dependent libraries that