Add mihawk sensor, fan control and d-bus monitor
Most of mihawk's sensors are different from witherspoon, so I temporarily
added the mihawk part and did not change the witherspoon.
Add mihawk version of fan control and d-bus monitor.
Mihawk does not have a water cooled mode, so another independent folder is added.
Tested: 1.Shut down the system if more than three cores
have a temperature greater than 100 degrees Celcius.
2.Fan control support cpu core, dimm, Onboard.
3.Confirm that sensor is able to return normally via REST.
(From meta-ibm rev: 949f91431bba2f0139cc823d674a741f9590c885)
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
Change-Id: Icc401f32c67b622f0f1448e1166112e02c135a8f
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
diff --git a/meta-ibm/meta-witherspoon/recipes-phosphor/fans/phosphor-fan-monitor-config/mihawk/monitor.yaml b/meta-ibm/meta-witherspoon/recipes-phosphor/fans/phosphor-fan-monitor-config/mihawk/monitor.yaml
new file mode 100644
index 0000000..076349d
--- /dev/null
+++ b/meta-ibm/meta-witherspoon/recipes-phosphor/fans/phosphor-fan-monitor-config/mihawk/monitor.yaml
@@ -0,0 +1,96 @@
+fans:
+ - inventory: /system/chassis/motherboard/fan0
+ allowed_out_of_range_time: 10
+ deviation: 15
+ num_sensors_nonfunc_for_fan_nonfunc: 1
+ sensors:
+ - name: fan0_0
+ has_target: true
+ target_interface: xyz.openbmc_project.Control.FanPwm
+ factor: 70
+ offset: 1200
+ - name: fan0_1
+ has_target: false
+ target_interface: xyz.openbmc_project.Control.FanPwm
+ factor: 70
+ offset: 1200
+
+ - inventory: /system/chassis/motherboard/fan1
+ allowed_out_of_range_time: 10
+ deviation: 15
+ num_sensors_nonfunc_for_fan_nonfunc: 1
+ sensors:
+ - name: fan1_0
+ has_target: true
+ target_interface: xyz.openbmc_project.Control.FanPwm
+ factor: 70
+ offset: 1200
+ - name: fan1_1
+ has_target: false
+ target_interface: xyz.openbmc_project.Control.FanPwm
+ factor: 70
+ offset: 1200
+
+ - inventory: /system/chassis/motherboard/fan2
+ allowed_out_of_range_time: 10
+ deviation: 15
+ num_sensors_nonfunc_for_fan_nonfunc: 1
+ sensors:
+ - name: fan2_0
+ has_target: true
+ target_interface: xyz.openbmc_project.Control.FanPwm
+ factor: 70
+ offset: 1200
+ - name: fan2_1
+ has_target: false
+ target_interface: xyz.openbmc_project.Control.FanPwm
+ factor: 70
+ offset: 1200
+
+ - inventory: /system/chassis/motherboard/fan3
+ allowed_out_of_range_time: 10
+ deviation: 15
+ num_sensors_nonfunc_for_fan_nonfunc: 1
+ sensors:
+ - name: fan3_0
+ has_target: true
+ target_interface: xyz.openbmc_project.Control.FanPwm
+ factor: 70
+ offset: 1200
+ - name: fan3_1
+ has_target: false
+ target_interface: xyz.openbmc_project.Control.FanPwm
+ factor: 70
+ offset: 1200
+
+ - inventory: /system/chassis/motherboard/fan4
+ allowed_out_of_range_time: 10
+ deviation: 15
+ num_sensors_nonfunc_for_fan_nonfunc: 1
+ sensors:
+ - name: fan4_0
+ has_target: true
+ target_interface: xyz.openbmc_project.Control.FanPwm
+ factor: 70
+ offset: 1200
+ - name: fan4_1
+ has_target: false
+ target_interface: xyz.openbmc_project.Control.FanPwm
+ factor: 70
+ offset: 1200
+
+ - inventory: /system/chassis/motherboard/fan5
+ allowed_out_of_range_time: 10
+ deviation: 15
+ num_sensors_nonfunc_for_fan_nonfunc: 1
+ sensors:
+ - name: fan5_0
+ has_target: true
+ target_interface: xyz.openbmc_project.Control.FanPwm
+ factor: 70
+ offset: 1200
+ - name: fan5_1
+ has_target: false
+ target_interface: xyz.openbmc_project.Control.FanPwm
+ factor: 70
+ offset: 1200