Add mihawk sensor, fan control and d-bus monitor
Most of mihawk's sensors are different from witherspoon, so I temporarily
added the mihawk part and did not change the witherspoon.
Add mihawk version of fan control and d-bus monitor.
Mihawk does not have a water cooled mode, so another independent folder is added.
Tested: 1.Shut down the system if more than three cores
have a temperature greater than 100 degrees Celcius.
2.Fan control support cpu core, dimm, Onboard.
3.Confirm that sensor is able to return normally via REST.
(From meta-ibm rev: 949f91431bba2f0139cc823d674a741f9590c885)
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
Change-Id: Icc401f32c67b622f0f1448e1166112e02c135a8f
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
diff --git a/meta-ibm/meta-witherspoon/recipes-phosphor/sensors/phosphor-hwmon/mihawk/obmc/hwmon/ahb/apb/bus@1e78a000/i2c-bus@100/power-supply@5b.conf b/meta-ibm/meta-witherspoon/recipes-phosphor/sensors/phosphor-hwmon/mihawk/obmc/hwmon/ahb/apb/bus@1e78a000/i2c-bus@100/power-supply@5b.conf
new file mode 100644
index 0000000..92838e1
--- /dev/null
+++ b/meta-ibm/meta-witherspoon/recipes-phosphor/sensors/phosphor-hwmon/mihawk/obmc/hwmon/ahb/apb/bus@1e78a000/i2c-bus@100/power-supply@5b.conf
@@ -0,0 +1,4 @@
+LABEL_in1="ps0_input_voltage"
+LABEL_in2="ps0_output_voltage"
+LABEL_curr1="ps0_output_current"
+LABEL_power1="ps0_input_power"