diff --git a/meta-openbmc-machines/meta-openpower/meta-rackspace/meta-barreleye/recipes-kernel/linux/linux-obmc/barreleye.cfg b/meta-openbmc-machines/meta-openpower/meta-rackspace/meta-barreleye/recipes-kernel/linux/linux-obmc/barreleye.cfg
new file mode 100644
index 0000000..0f96507
--- /dev/null
+++ b/meta-openbmc-machines/meta-openpower/meta-rackspace/meta-barreleye/recipes-kernel/linux/linux-obmc/barreleye.cfg
@@ -0,0 +1 @@
+CONFIG_SENSORS_OCC=y
diff --git a/meta-openbmc-machines/meta-openpower/meta-rackspace/meta-barreleye/recipes-kernel/linux/linux-obmc/occ_hwmon.patch b/meta-openbmc-machines/meta-openpower/meta-rackspace/meta-barreleye/recipes-kernel/linux/linux-obmc/occ_hwmon.patch
new file mode 100644
index 0000000..612214d
--- /dev/null
+++ b/meta-openbmc-machines/meta-openpower/meta-rackspace/meta-barreleye/recipes-kernel/linux/linux-obmc/occ_hwmon.patch
@@ -0,0 +1,1565 @@
+diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
+index e13c902..38aff0c 100644
+--- a/drivers/hwmon/Kconfig
++++ b/drivers/hwmon/Kconfig
+@@ -1167,6 +1167,13 @@ config SENSORS_NCT7904
+ 	  This driver can also be built as a module.  If so, the module
+ 	  will be called nct7904.
+ 
++config SENSORS_OCC
++	tristate "OCC sensor driver for IBM Power CPU"
++	depends on I2C
++	help
++	  If you say yes here you get support for driver to read sensors in 
++	  IBM Power CPU On-Chip-Controller. module will be called occ.
++
+ config SENSORS_PCF8591
+ 	tristate "Philips PCF8591 ADC/DAC"
+ 	depends on I2C
+diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
+index 9e0f3dd..53dc3b3 100644
+--- a/drivers/hwmon/Makefile
++++ b/drivers/hwmon/Makefile
+@@ -123,6 +123,7 @@ obj-$(CONFIG_SENSORS_NCT6775)	+= nct6775.o
+ obj-$(CONFIG_SENSORS_NCT7802)	+= nct7802.o
+ obj-$(CONFIG_SENSORS_NCT7904)	+= nct7904.o
+ obj-$(CONFIG_SENSORS_NTC_THERMISTOR)	+= ntc_thermistor.o
++obj-$(CONFIG_SENSORS_OCC)	+= occ.o
+ obj-$(CONFIG_SENSORS_PC87360)	+= pc87360.o
+ obj-$(CONFIG_SENSORS_PC87427)	+= pc87427.o
+ obj-$(CONFIG_SENSORS_PCF8591)	+= pcf8591.o
+diff --git a/drivers/hwmon/occ.c b/drivers/hwmon/occ.c
+new file mode 100644
+index 0000000..f265ff3
+--- /dev/null
++++ b/drivers/hwmon/occ.c
+@@ -0,0 +1,1529 @@
++/*
++ * Open BMC OCC HWMON driver - read Power8 OCC (On Chip Controller) sensor data via i2c.
++ *
++ * Copyright (c) 2015 IBM (Alvin Wang, Li Yi)
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/slab.h>
++#include <linux/jiffies.h>
++#include <linux/i2c.h>
++#include <linux/hwmon.h>
++#include <linux/hwmon-sysfs.h>
++#include <linux/err.h>
++#include <linux/mutex.h>
++#include <linux/of.h>
++#include <linux/delay.h>
++
++//#define DEBUG    1
++
++/* ------------------------------------------------------------*/
++/* OCC sensor data format */
++typedef struct {
++	uint16_t sensor_id;
++	uint16_t value;
++} occ_sensor;
++
++typedef struct {
++	uint16_t sensor_id;
++	uint32_t update_tag;
++	uint32_t accumulator;
++	uint16_t value;
++} powr_sensor;
++
++typedef struct {
++	uint16_t curr_powercap;
++	uint16_t curr_powerreading;
++	uint16_t norm_powercap;
++	uint16_t max_powercap;
++	uint16_t min_powercap;
++	uint16_t user_powerlimit;
++} caps_sensor;
++
++typedef struct {
++	char sensor_type[5];
++	uint8_t reserved0;
++	uint8_t sensor_format;
++	uint8_t sensor_length;
++	uint8_t num_of_sensors;
++	occ_sensor *sensor;
++	powr_sensor *powr;
++	caps_sensor *caps;
++} sensor_data_block;
++
++typedef struct {
++	uint8_t status;
++	uint8_t ext_status;
++	uint8_t occs_present;
++	uint8_t config;
++	uint8_t occ_state;
++	uint8_t reserved0;
++	uint8_t reserved1;
++	uint8_t error_log_id;
++	uint32_t error_log_addr_start;
++	uint16_t error_log_length;
++	uint8_t reserved2;
++	uint8_t reserved3;
++	char occ_code_level[17];
++	char sensor_eye_catcher[7];
++	uint8_t num_of_sensor_blocks;
++	uint8_t sensor_data_version;
++	sensor_data_block* blocks;
++} occ_poll_data;
++
++typedef struct {
++	uint8_t sequence_num;
++	uint8_t cmd_type;
++	uint8_t rtn_status;
++	uint16_t data_length;
++	occ_poll_data data;
++	uint16_t chk_sum;
++	int temp_block_id;
++	int freq_block_id;
++	int power_block_id;
++	int caps_block_id;
++} occ_response_t;
++
++//static occ_response_t occ_resp;
++
++/* Each client has this additional data */
++struct occ_drv_data {
++	struct i2c_client	*client;
++	struct device		*hwmon_dev;
++	struct mutex		update_lock;
++	char			valid;		/* !=0 if sensor data are valid */
++	unsigned long		last_updated;	/* In jiffies */
++	unsigned long		sample_time;	/* Mininum timer interval for sampling In jiffies */
++	occ_response_t		occ_resp;
++};
++
++/*-----------------------------------------------------------------------*/
++/* i2c read and write occ sensors */
++
++#define OCC_DATA_MAX 4096 /* 4KB at most */
++#define I2C_STATUS_REG 0x000d0001
++#define I2C_ERROR_REG  0x000d0002
++#define I2C_READ_ERROR 1
++#define I2C_WRITE_ERROR 2
++#define I2C_DATABUFFER_SIZE_ERROR 3
++
++/*
++#define SCOM_OCC_SRAM_WOX  0x0006B013
++#define SCOM_OCC_SRAM_WAND 0x0006B012
++#define SCOM_OCC_SRAM_ADDR 0x0006B010
++#define SCOM_OCC_SRAM_DATA 0x0006B015
++*/
++
++// To generate attn to OCC
++#define ATTN_DATA                0x0006B035
++
++// For BMC to read/write SRAM
++#define OCB_ADDRESS              0x0006B070
++#define OCB_DATA                 0x0006B075
++#define OCB_STATUS_CONTROL_AND   0x0006B072
++#define OCB_STATUS_CONTROL_OR    0x0006B073
++
++#define OCC_COMMAND_ADDR 0xFFFF6000
++#define OCC_RESPONSE_ADDR 0xFFFF7000
++
++static int deinit_occ_resp_buf(occ_response_t *p)
++{
++	int b;
++
++	if (p == NULL)
++		return 0;
++
++	if (p->data.blocks == NULL)
++		return 0;
++
++	for(b = 0; b < p->data.num_of_sensor_blocks; b++) {
++		if (!p->data.blocks[b].sensor)
++			kfree(p->data.blocks[b].sensor);
++		if (!p->data.blocks[b].powr)
++			kfree(p->data.blocks[b].powr);
++		if (!p->data.blocks[b].caps)
++			kfree(p->data.blocks[b].caps);
++	}
++
++	kfree(p->data.blocks);
++
++	memset(p, 0, sizeof(*p));
++
++
++	return 0;
++}
++
++static ssize_t occ_i2c_read(struct i2c_client *client, char *buf, size_t count)
++{
++	int ret = 0;
++
++	if (count > 8192)
++		count = 8192;
++
++	//printk("i2c_read: reading %zu bytes @0x%x.\n", count, client->addr);
++	ret = i2c_master_recv(client, buf, count);
++	return ret;
++}
++
++static ssize_t occ_i2c_write(struct i2c_client *client, const char *buf, size_t count)
++{
++	int ret = 0;
++
++	if (count > 8192)
++		count = 8192;
++
++	//printk("i2c_write: writing %zu bytes @0x%x.\n", count, client->addr);
++	ret = i2c_master_send(client, buf, count);
++	return ret;
++}
++
++/* read two 4-byte value */
++static int occ_getscom(struct i2c_client *client, uint32_t address, uint32_t *value0, uint32_t *value1)
++{
++	uint32_t ret = 0;
++	char buf[8];
++	const char* address_buf = (const char*)&address;
++
++	//P8 i2c slave requires address to be shifted by 1
++	address = address << 1;
++
++	ret = occ_i2c_write(client, address_buf, sizeof(address));
++	/* FIXME: ast i2c driver does not read corret value */
++	//if (ret != sizeof(address))
++	//	return -I2C_WRITE_ERROR;
++
++	ret = occ_i2c_read(client, buf, sizeof(buf));
++	//if (ret != sizeof(buf))
++	//	return -I2C_READ_ERROR;
++
++	memcpy(value1, &buf[0], sizeof(*value1));
++	memcpy(value0, &buf[4], sizeof(*value0));
++
++	return 0;
++}
++
++/* read 8-byte value and put into data[offset] */
++static int occ_getscomb(struct i2c_client *client, uint32_t address, char* data, int offset)
++{
++	uint32_t ret = 0;
++	const char* address_buf = (const char*)&address;
++	char buf[8];
++	int b = 0;
++
++	//P8 i2c slave requires address to be shifted by 1
++	address = address << 1;
++
++	ret = occ_i2c_write(client, address_buf, sizeof(address));
++	//if (ret != sizeof(address))
++	//	return -I2C_WRITE_ERROR;
++
++	ret = occ_i2c_read(client, buf, sizeof(buf));
++	//if (ret != sizeof(buf))
++	//	return -I2C_READ_ERROR;
++
++	for (b = 0; b < 8; b++) {
++		data[offset + b] = buf[7 - b];
++	}
++
++	return 0;
++}
++
++static int occ_putscom(struct i2c_client *client, uint32_t address, uint32_t data0, uint32_t data1)
++{
++	const char* address_buf = (const char*)&address;
++	const char* d0 = (const char*)&data0;
++	const char* d1 = (const char*)&data1;
++	char buf[12];
++	uint32_t ret = 0;
++
++	//P8 i2c slave requires address to be shifted by 1
++	address = address << 1;
++
++	memcpy(&buf[0], address_buf, sizeof(address));
++	memcpy(&buf[4], d1, sizeof(data1));
++	memcpy(&buf[8],	d0, sizeof(data0));
++
++	ret = occ_i2c_write(client, buf, sizeof(buf));
++	//if (ret != sizeof(buf))
++	//	return I2C_WRITE_ERROR;
++
++	return 0;
++}
++
++static int occ_check_i2c_errors(struct i2c_client *client)
++{
++	uint32_t v0;
++	uint32_t v1;
++
++	occ_getscom(client, I2C_STATUS_REG, &v0, &v1);
++	if (v0 != 0x80000000) {
++		printk("ERROR present in P8 I2C Slave.  Clearing...\n");
++		occ_putscom(client, I2C_ERROR_REG, 0x00000000, 0x00000000);
++		occ_putscom(client, I2C_STATUS_REG, 0x00000000, 0x00000000);
++		return -1;
++	}
++
++	return 0;
++}
++
++
++static inline uint16_t get_occdata_length(char* d)
++{
++	uint16_t data_length = 0;
++
++	data_length = d[3] << 8;
++	data_length = data_length | d[4];
++	return data_length;
++}
++
++
++static int parse_occ_response(char* d, occ_response_t* o)
++{
++	int b = 0;
++	int s = 0;
++	int ret = 0;
++	int dnum = 45;
++
++	o->sequence_num = d[0];
++	o->cmd_type = d[1];
++	o->rtn_status = d[2];
++	o->data_length = d[3] << 8;
++	o->data_length = o->data_length | d[4];
++	o->data.status = d[5];
++	o->data.ext_status = d[6];
++	o->data.occs_present = d[7];
++	o->data.config = d[8];
++	o->data.occ_state = d[9];
++	o->data.reserved0 = d[10];
++	o->data.reserved1 = d[11];
++	o->data.error_log_id = d[12];
++	o->data.error_log_addr_start = d[13] << 24;
++	o->data.error_log_addr_start = o->data.error_log_addr_start | d[14] << 16;
++	o->data.error_log_addr_start = o->data.error_log_addr_start | d[15] << 8;
++	o->data.error_log_addr_start = o->data.error_log_addr_start | d[16];
++	o->data.error_log_length = d[17] << 8;
++	o->data.error_log_length = o->data.error_log_length | d[18];
++	o->data.reserved2 = d[19];
++	o->data.reserved3 = d[20];
++	strncpy(&o->data.occ_code_level[0], (const char*)&d[21], 16);
++	strncpy(&o->data.sensor_eye_catcher[0], (const char*)&d[37], 6);
++	o->data.sensor_eye_catcher[6]='\0';
++	o->data.num_of_sensor_blocks=d[43];
++	o->data.sensor_data_version = d[44];
++
++	if (strcmp(o->data.sensor_eye_catcher, "SENSOR") != 0) {
++		printk("ERROR: SENSOR not found at byte 37 (%s)\n",o->data.sensor_eye_catcher);
++		return -1;
++	}
++
++	if (o->data.num_of_sensor_blocks == 0) {
++		printk("ERROR: SENSOR block num is 0\n");
++		return -1;
++	}
++
++	o->data.blocks = kzalloc(sizeof(sensor_data_block) * o->data.num_of_sensor_blocks, GFP_KERNEL);
++	if (o->data.blocks == NULL)
++		return -ENOMEM;
++
++	//printk("Reading %d sensor blocks\n", o->data.num_of_sensor_blocks);
++	o->temp_block_id = -1;
++	o->freq_block_id = -1;
++	o->power_block_id = -1;
++	o->caps_block_id = -1;
++	for(b = 0; b < o->data.num_of_sensor_blocks; b++) {
++		/* 8-byte sensor block head */
++		strncpy(&o->data.blocks[b].sensor_type[0], (const char*)&d[dnum], 4);
++		o->data.blocks[b].reserved0 = d[dnum+4];
++		o->data.blocks[b].sensor_format = d[dnum+5];
++		o->data.blocks[b].sensor_length = d[dnum+6];
++		o->data.blocks[b].num_of_sensors = d[dnum+7];
++		dnum = dnum + 8;
++
++		//printk("sensor block[%d]: type: %s, num_of_sensors: %d, sensor_length: %u\n",
++			//b, o->data.blocks[b].sensor_type, o->data.blocks[b].num_of_sensors,
++			//o->data.blocks[b].sensor_length);
++
++		/* empty sensor block */
++		if (o->data.blocks[b].num_of_sensors <= 0)
++			continue;
++		if (o->data.blocks[b].sensor_length == 0)
++			continue;
++
++		if (strcmp(o->data.blocks[b].sensor_type, "FREQ") == 0) {
++			o->data.blocks[b].sensor =
++				kzalloc(sizeof(occ_sensor) * o->data.blocks[b].num_of_sensors, GFP_KERNEL);
++
++			if (o->data.blocks[b].sensor == NULL) {
++				ret = -ENOMEM;
++				goto abort;
++			}
++			o->freq_block_id = b;
++			for (s = 0; s < o->data.blocks[b].num_of_sensors; s++) {
++				o->data.blocks[b].sensor[s].sensor_id = d[dnum] << 8;
++				o->data.blocks[b].sensor[s].sensor_id =
++					o->data.blocks[b].sensor[s].sensor_id | d[dnum+1];
++				o->data.blocks[b].sensor[s].value = d[dnum+2] << 8;
++				o->data.blocks[b].sensor[s].value = o->data.blocks[b].sensor[s].value | d[dnum+3];
++				//printk("sensor[%d]-[%d]: id: %u, value: %u\n",
++				//	b, s, o->data.blocks[b].sensor[s].sensor_id, o->data.blocks[b].sensor[s].value);
++				dnum = dnum + o->data.blocks[b].sensor_length;
++			}
++		}
++		else if (strcmp(o->data.blocks[b].sensor_type, "TEMP") == 0) {
++
++			o->data.blocks[b].sensor =
++				kzalloc(sizeof(occ_sensor) * o->data.blocks[b].num_of_sensors, GFP_KERNEL);
++
++			if (o->data.blocks[b].sensor == NULL) {
++				ret = -ENOMEM;
++				goto abort;
++			}
++
++			o->temp_block_id = b;
++			for (s = 0; s < o->data.blocks[b].num_of_sensors; s++) {
++				o->data.blocks[b].sensor[s].sensor_id = d[dnum] << 8;
++				o->data.blocks[b].sensor[s].sensor_id =
++					o->data.blocks[b].sensor[s].sensor_id | d[dnum+1];
++				o->data.blocks[b].sensor[s].value = d[dnum+2] << 8;
++				o->data.blocks[b].sensor[s].value = o->data.blocks[b].sensor[s].value | d[dnum+3];
++				//printk("sensor[%d]-[%d]: id: %u, value: %u\n",
++				//	b, s, o->data.blocks[b].sensor[s].sensor_id, o->data.blocks[b].sensor[s].value);
++				dnum = dnum + o->data.blocks[b].sensor_length;
++			}
++		}
++		else if (strcmp(o->data.blocks[b].sensor_type, "POWR") == 0) {
++
++			o->data.blocks[b].powr =
++				kzalloc(sizeof(powr_sensor) * o->data.blocks[b].num_of_sensors, GFP_KERNEL);
++
++			if (o->data.blocks[b].powr == NULL) {
++				ret = -ENOMEM;
++				goto abort;
++			}
++			o->power_block_id = b;
++			for (s = 0; s < o->data.blocks[b].num_of_sensors; s++) {
++				o->data.blocks[b].powr[s].sensor_id = d[dnum] << 8;
++				o->data.blocks[b].powr[s].sensor_id = o->data.blocks[b].powr[s].sensor_id | d[dnum+1];
++				o->data.blocks[b].powr[s].update_tag = d[dnum+2] << 24;
++				o->data.blocks[b].powr[s].update_tag = o->data.blocks[b].powr[s].update_tag | d[dnum+3] << 16;
++				o->data.blocks[b].powr[s].update_tag = o->data.blocks[b].powr[s].update_tag | d[dnum+4] << 8;
++				o->data.blocks[b].powr[s].update_tag = o->data.blocks[b].powr[s].update_tag | d[dnum+5];
++				o->data.blocks[b].powr[s].accumulator = d[dnum+6] << 24;
++				o->data.blocks[b].powr[s].accumulator = o->data.blocks[b].powr[s].accumulator | d[dnum+7] << 16;
++				o->data.blocks[b].powr[s].accumulator = o->data.blocks[b].powr[s].accumulator | d[dnum+8] << 8;
++				o->data.blocks[b].powr[s].accumulator = o->data.blocks[b].powr[s].accumulator | d[dnum+9];
++				o->data.blocks[b].powr[s].value = d[dnum+10] << 8;
++				o->data.blocks[b].powr[s].value = o->data.blocks[b].powr[s].value | d[dnum+11];
++
++				//printk("sensor[%d]-[%d]: id: %u, value: %u\n",
++				//	b, s, o->data.blocks[b].powr[s].sensor_id, o->data.blocks[b].powr[s].value);
++
++				dnum = dnum + o->data.blocks[b].sensor_length;
++			}
++		}
++		else if (strcmp(o->data.blocks[b].sensor_type, "CAPS") == 0) {
++
++			o->data.blocks[b].caps =
++				kzalloc(sizeof(caps_sensor) * o->data.blocks[b].num_of_sensors, GFP_KERNEL);
++
++			if (o->data.blocks[b].caps == NULL) {
++				ret = -ENOMEM;
++				goto abort;
++			}
++			o->caps_block_id = b;
++			for (s = 0; s < o->data.blocks[b].num_of_sensors; s++) {
++				o->data.blocks[b].caps[s].curr_powercap = d[dnum] << 8;
++				o->data.blocks[b].caps[s].curr_powercap = o->data.blocks[b].caps[s].curr_powercap | d[dnum+1];
++				o->data.blocks[b].caps[s].curr_powerreading = d[dnum+2] << 8;
++				o->data.blocks[b].caps[s].curr_powerreading = o->data.blocks[b].caps[s].curr_powerreading | d[dnum+3];
++				o->data.blocks[b].caps[s].norm_powercap = d[dnum+4] << 8;
++				o->data.blocks[b].caps[s].norm_powercap = o->data.blocks[b].caps[s].norm_powercap | d[dnum+5];
++				o->data.blocks[b].caps[s].max_powercap = d[dnum+6] << 8;
++				o->data.blocks[b].caps[s].max_powercap = o->data.blocks[b].caps[s].max_powercap| d[dnum+7];
++				o->data.blocks[b].caps[s].min_powercap = d[dnum+8] << 8;
++				o->data.blocks[b].caps[s].min_powercap = o->data.blocks[b].caps[s].min_powercap| d[dnum+9];
++				o->data.blocks[b].caps[s].user_powerlimit = d[dnum+10] << 8;
++				o->data.blocks[b].caps[s].user_powerlimit = o->data.blocks[b].caps[s].user_powerlimit| d[dnum+11];
++
++				dnum = dnum + o->data.blocks[b].sensor_length;
++				//printk("CAPS sensor #%d:\n", s);
++				//printk("curr_powercap is %x \n", o->data.blocks[b].caps[s].curr_powercap);
++				//printk("curr_powerreading is %x \n", o->data.blocks[b].caps[s].curr_powerreading);
++				//printk("norm_powercap is %x \n", o->data.blocks[b].caps[s].norm_powercap);
++				//printk("max_powercap is %x \n", o->data.blocks[b].caps[s].max_powercap);
++				//printk("min_powercap is %x \n", o->data.blocks[b].caps[s].min_powercap);
++				//printk("user_powerlimit is %x \n", o->data.blocks[b].caps[s].user_powerlimit);
++			}
++
++		}
++		else {
++			printk("ERROR: sensor type %s not supported\n", o->data.blocks[b].sensor_type);
++			ret = -1;
++			goto abort;
++		}
++	}
++
++	return 0;
++abort:
++	deinit_occ_resp_buf(o);
++	return ret;
++}
++
++/* used for testing */
++char fake_occ_rsp[OCC_DATA_MAX] = {
++0x69, 0x00, 0x00, 0x00, 0xa4, 0xc3, 0x00, 0x03, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++0x00, 0x00, 0x00, 0x00, 0x00, 0x6f, 0x70, 0x5f, 0x6f, 0x63, 0x63, 0x5f, 0x31, 0x35, 0x30, 0x37,
++0x31, 0x36, 0x61, 0x00, 0x00, 0x53, 0x45, 0x4e, 0x53, 0x4f, 0x52, 0x04, 0x01, 0x54, 0x45, 0x4d,
++0x50, 0x00, 0x01, 0x04, 0x0a, 0x00 ,0x6a, 0x00, 0x00, 0x00, 0x6c, 0x00, 0x00, 0x00, 0x6d, 0x00,
++0x00,0x00,0x6e,0x00, 0x00,0x00,0x6f,0x00, 0x00,0x00,0x70,0x00, 0x00,0x00,0x71,0x00,
++0x00,0x00,0x73,0x00, 0x00,0x00,0x74,0x00, 0x00,0x00,0x75,0x00, 0x00,0x46,0x52,0x45,
++0x51,0x00,0x01,0x04, 0x0a,0x00,0x76,0x00, 0x00,0x00,0x78,0x00, 0x00,0x00,0x79,0x00,
++0x00,0x00,0x7a,0x00, 0x00,0x00,0x7b,0x00, 0x00,0x00,0x7c,0x00, 0x00,0x00,0x7d,0x00,
++0x00,0x00,0x7f,0x00, 0x00,0x00,0x80,0x00, 0x00,0x00,0x81,0x00, 0x00,0x50,0x4f,0x57,
++0x52,0x00,0x01,0x0c, 0x00,0x43,0x41,0x50, 0x53,0x00,0x01,0x0c, 0x01,0x00,0x00,0x00,
++0x00,0x04,0xb0,0x09, 0x60,0x04,0x4c,0x00, 0x00,0x17,0xc5,};
++
++//#define DUMP_RAW 1
++
++static int occ_get_all(struct i2c_client *client, occ_response_t *occ_resp)
++{
++	char occ_data[OCC_DATA_MAX];
++	uint16_t num_bytes = 0;
++	int b = 0;
++	int ret = 0;
++/*
++	//Procedure to access SRAM where OCC data is located
++	occ_putscom(client, SCOM_OCC_SRAM_WOX, 0x08000000, 0x00000000);
++	occ_putscom(client, SCOM_OCC_SRAM_WAND, 0xFBFFFFFF, 0xFFFFFFFF);
++	occ_putscom(client, SCOM_OCC_SRAM_ADDR, OCC_RESPONSE_ADDR, 0x00000000);
++	occ_putscom(client, SCOM_OCC_SRAM_ADDR, OCC_RESPONSE_ADDR, 0x00000000);
++
++	occ_getscomb(client, SCOM_OCC_SRAM_DATA, occ_data, 0);
++
++*/
++
++	// Init OCB
++	occ_putscom(client, OCB_STATUS_CONTROL_OR,  0x08000000, 0x00000000);
++	occ_putscom(client, OCB_STATUS_CONTROL_AND, 0xFBFFFFFF, 0xFFFFFFFF);
++
++	// Send poll command to OCC
++	occ_putscom(client, OCB_ADDRESS, OCC_COMMAND_ADDR, 0x00000000);
++	occ_putscom(client, OCB_ADDRESS, OCC_COMMAND_ADDR, 0x00000000);
++	occ_putscom(client, OCB_DATA, 0x00000001, 0x10001100);
++
++	// Trigger ATTN
++	occ_putscom(client, ATTN_DATA, 0x01010000, 0x00000000);
++
++	// TODO: check command status Refere to
++	// "1.6.2 OCC Command/Response Sequence" in OCC_OpenPwr_FW_Interfaces1.2.pdf
++	// Use sleep as workaround
++	//msleep(2000);
++
++	// Get response data
++	occ_putscom(client, OCB_ADDRESS, OCC_RESPONSE_ADDR, 0x00000000);
++	occ_getscomb(client, OCB_DATA, occ_data, 0);
++
++	/* FIXME: use fake data to test driver without hw */
++	//printk("i2c-occ: using FAKE occ data\n");
++	//memcpy(&occ_data[0], &fake_occ_rsp[0], sizeof(occ_data));
++
++	num_bytes = get_occdata_length(occ_data);
++
++	//printk("OCC data length: %d\n", num_bytes);
++
++#ifdef DUMP_RAW
++	int i = 0;
++	printk("\nRAW data\n==================\n");
++	for (i = 0; i < 8; i++) {
++		if(i == 4) printk("  ");
++		printk("%02x", occ_data[i]);
++	}
++	printk("\n");
++#endif
++
++	if (num_bytes > OCC_DATA_MAX) {
++		printk("ERROR: OCC data length must be < 4KB\n");
++		return -1;
++	}
++
++	if (num_bytes <= 0) {
++		printk("ERROR: OCC data length is zero\n");
++		return -1;
++	}
++
++	for (b = 8; b < num_bytes + 8; b = b + 8) {
++		//occ_getscomb(client, SCOM_OCC_SRAM_DATA, occ_data, b);
++		occ_getscomb(client, OCB_DATA, occ_data, b);
++#ifdef DUMP_RAW
++	for (i = 0; i < 8; i++) {
++		if(i == 4) printk("  ");
++		printk("%02x", occ_data[b+i]);
++	}
++	printk("\n");
++#endif
++
++	}
++
++	/* FIXME: use fake data to test driver without hw */
++	//memcpy(&occ_data[0], &fake_occ_rsp[0], sizeof(occ_data));
++
++	ret = parse_occ_response(occ_data, occ_resp);
++
++	return ret;
++}
++
++
++static int occ_update_device(struct device *dev)
++{
++	struct occ_drv_data *data = dev_get_drvdata(dev);
++	struct i2c_client *client = data->client;
++	int ret = 0;
++
++	mutex_lock(&data->update_lock);
++
++	if (time_after(jiffies, data->last_updated + data->sample_time)
++	    || !data->valid) {
++		deinit_occ_resp_buf(&data->occ_resp);
++
++		ret = occ_get_all(client, &data->occ_resp);
++
++		data->last_updated = jiffies;
++		data->valid = 1;
++	}
++	mutex_unlock(&data->update_lock);
++
++	return ret;
++}
++
++/* ----------------------------------------------------------------------*/
++/* sysfs attributes for hwmon */
++
++static ssize_t show_occ_temp_input(struct device *hwmon_dev, struct device_attribute *da, char *buf)
++{
++	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
++	int n = attr->index;
++	struct device * dev = hwmon_dev->parent;
++	struct occ_drv_data *data = dev_get_drvdata(dev);
++	int ret = 0;
++	occ_sensor *sensor;
++	int val = 0;
++
++	ret = occ_update_device(dev);
++
++	if (ret != 0)
++	{
++		/* FIXME: to test fake data */
++		printk("ERROR: cannot get occ sensor data: %d\n", ret);
++		return ret;
++	}
++
++	if (data->occ_resp.data.blocks == NULL ||
++		data->occ_resp.data.blocks[data->occ_resp.temp_block_id].sensor == NULL)
++		return -1;
++
++	//printk("block_id: %d, sensor: %d\n", data->occ_resp.temp_block_id, n -1);
++	sensor = &data->occ_resp.data.blocks[data->occ_resp.temp_block_id].sensor[n - 1];
++	/* in millidegree Celsius */
++	val = sensor->value * 1000;
++	//printk("temp%d sensor value: %d\n", n, val);
++
++	//printk("------------- above are debug message, bellow is real output------------\n");
++	return sprintf(buf, "%d\n", val);
++}
++
++static ssize_t show_occ_temp_label(struct device *hwmon_dev, struct device_attribute *da, char *buf)
++{
++	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
++	int n = attr->index;
++	struct device *dev = hwmon_dev->parent;
++	struct occ_drv_data *data = dev_get_drvdata(dev);
++	int ret = 0;
++	occ_sensor *sensor;
++	int val = 0;
++
++	ret = occ_update_device(dev);
++
++	if (ret != 0)
++	{
++		/* FIXME: to test fake data */
++		printk("ERROR: cannot get occ sensor data: %d\n", ret);
++		return ret;
++	}
++
++	if (data->occ_resp.data.blocks == NULL ||
++		data->occ_resp.data.blocks[data->occ_resp.temp_block_id].sensor == NULL)
++		return -1;
++
++	//printk("temp_block_id: %d, sensor: %d\n", data->occ_resp.temp_block_id, n -1);
++	sensor = &data->occ_resp.data.blocks[data->occ_resp.temp_block_id].sensor[n - 1];
++	val = sensor->sensor_id;
++	//printk("temp%d sensor id: %d\n", n, val);
++
++	//printk("------------- above are debug message, bellow is real output------------\n");
++	return sprintf(buf, "%d\n", val);
++}
++
++static ssize_t show_occ_power_label(struct device *hwmon_dev, struct device_attribute *da, char *buf)
++{
++	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
++	int n = attr->index;
++	struct device *dev = hwmon_dev->parent;
++	struct occ_drv_data *data = dev_get_drvdata(dev);
++	int ret = 0;
++	powr_sensor *sensor;
++	int val = 0;
++
++	ret = occ_update_device(dev);
++
++	if (ret != 0)
++	{
++		/* FIXME: to test fake data */
++		printk("ERROR: cannot get occ sensor data: %d\n", ret);
++		return ret;
++	}
++
++	//printk("power_block_id: %d, sensor: %d\n", data->occ_resp.power_block_id, n -1);
++
++	if (data->occ_resp.data.blocks == NULL ||
++		data->occ_resp.data.blocks[data->occ_resp.power_block_id].powr == NULL)
++		return -1;
++
++	sensor = &data->occ_resp.data.blocks[data->occ_resp.power_block_id].powr[n - 1];
++	val = sensor->sensor_id;
++	//printk("power%d sensor id: %d\n", n, val);
++
++	//printk("------------- above are debug message, bellow is real output------------\n");
++	return sprintf(buf, "%d\n", val);
++}
++
++
++static ssize_t show_occ_power_input(struct device *hwmon_dev, struct device_attribute *da, char *buf)
++{
++	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
++	int n = attr->index;
++	struct device *dev = hwmon_dev->parent;
++	struct occ_drv_data *data = dev_get_drvdata(dev);
++	int ret = 0;
++	powr_sensor *sensor;
++	int val = 0;
++
++	ret = occ_update_device(dev);
++
++	if (ret != 0)
++	{
++		/* FIXME: to test fake data */
++		printk("ERROR: cannot get occ sensor data: %d\n", ret);
++		return ret;
++	}
++
++	//printk("power block_id: %d, sensor: %d\n", data->occ_resp.power_block_id, n -1);
++
++	if (data->occ_resp.data.blocks == NULL ||
++		data->occ_resp.data.blocks[data->occ_resp.power_block_id].powr == NULL)
++		return -1;
++
++
++	sensor = &data->occ_resp.data.blocks[data->occ_resp.power_block_id].powr[n - 1];
++	val = sensor->value;
++	//printk("power%d sensor value: %d\n", n, val);
++
++	//printk("------------- above are debug message, bellow is real output------------\n");
++	return sprintf(buf, "%d\n", val);
++}
++
++
++static ssize_t show_occ_freq_label(struct device *hwmon_dev, struct device_attribute *da, char *buf)
++{
++	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
++	int n = attr->index;
++	struct device *dev = hwmon_dev->parent;
++	struct occ_drv_data *data = dev_get_drvdata(dev);
++	int ret = 0;
++	occ_sensor *sensor;
++	int val = 0;
++
++	ret = occ_update_device(dev);
++
++	if (ret != 0)
++	{
++		/* FIXME: to test fake data */
++		printk("ERROR: cannot get occ sensor data: %d\n", ret);
++		return ret;
++	}
++
++	if (data->occ_resp.data.blocks == NULL ||
++		data->occ_resp.data.blocks[data->occ_resp.freq_block_id].sensor == NULL)
++		return -1;
++
++	//printk("freq_block_id: %d, sensor: %d\n", data->occ_resp.freq_block_id, n -1);
++	sensor = &data->occ_resp.data.blocks[data->occ_resp.freq_block_id].sensor[n - 1];
++	val = sensor->sensor_id;
++	//printk("freq%d sensor id: %d\n", n, val);
++
++	//printk("------------- above are debug message, bellow is real output------------\n");
++	return sprintf(buf, "%d\n", val);
++}
++
++
++static ssize_t show_occ_freq_input(struct device *hwmon_dev, struct device_attribute *da, char *buf)
++{
++	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
++	int n = attr->index;
++	struct device *dev = hwmon_dev->parent;
++	struct occ_drv_data *data = dev_get_drvdata(dev);
++	int ret = 0;
++	occ_sensor *sensor;
++	int val = 0;
++
++	ret = occ_update_device(dev);
++
++	if (ret != 0)
++	{
++		/* FIXME: to test fake data */
++		printk("ERROR: cannot get occ sensor data: %d\n", ret);
++		return ret;
++	}
++
++	if (data->occ_resp.data.blocks == NULL ||
++		data->occ_resp.data.blocks[data->occ_resp.freq_block_id].sensor == NULL)
++		return -1;
++
++	//printk("block_id: %d, sensor: %d\n", data->occ_resp.freq_block_id, n -1);
++	sensor = &data->occ_resp.data.blocks[data->occ_resp.freq_block_id].sensor[n - 1];
++	val = sensor->value;
++	//printk("freq%d sensor value: %d\n", n, val);
++
++	//printk("------------- above are debug message, bellow is real output------------\n");
++	return sprintf(buf, "%d\n", val);
++}
++
++static ssize_t show_occ_caps(struct device *hwmon_dev, struct device_attribute *da, char *buf)
++{
++	struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(da);
++	int nr = attr->nr;
++	int n = attr->index;
++	struct device *dev = hwmon_dev->parent;
++	struct occ_drv_data *data = dev_get_drvdata(dev);
++	int ret = 0;
++	caps_sensor *sensor;
++	int val = 0;
++
++	ret = occ_update_device(dev);
++	if (ret != 0)
++	{
++		/* FIXME: to test fake data */
++		printk("ERROR: cannot get occ sensor data: %d\n", ret);
++		return ret;
++	}
++
++	//printk("block_id: %d, sensor: %d, nr: %d\n", data->occ_resp.caps_block_id, n - 1, nr);
++	if (data->occ_resp.data.blocks == NULL ||
++		data->occ_resp.data.blocks[data->occ_resp.caps_block_id].caps == NULL)
++		return -1;
++
++	sensor = &data->occ_resp.data.blocks[data->occ_resp.caps_block_id].caps[n - 1];
++
++	switch (nr) {
++		case 0:
++			val = sensor->curr_powercap;
++			break;
++		case 1:
++			val = sensor->curr_powerreading;
++			break;
++		case 2:
++			val = sensor->norm_powercap;
++			break;
++		case 3:
++			val = sensor->max_powercap;
++			break;
++		case 4:
++			val = sensor->min_powercap;
++			break;
++		case 5:
++			val = sensor->user_powerlimit;
++			break;
++		default:
++			val = 0;
++	}
++
++	//printk("caps%d sensor value: %d, nr: %d\n", n, val, nr);
++
++	//printk("------------- above are debug message, bellow is real output------------\n");
++	return sprintf(buf, "%d\n", val);
++}
++
++#if 0
++static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_occ_temp_input, NULL, 1);
++static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_occ_temp_input, NULL, 2);
++static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_occ_temp_input, NULL, 3);
++static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_occ_temp_input, NULL, 4);
++static SENSOR_DEVICE_ATTR(temp5_input, S_IRUGO, show_occ_temp_input, NULL, 5);
++static SENSOR_DEVICE_ATTR(temp6_input, S_IRUGO, show_occ_temp_input, NULL, 6);
++static SENSOR_DEVICE_ATTR(temp7_input, S_IRUGO, show_occ_temp_input, NULL, 7);
++static SENSOR_DEVICE_ATTR(temp8_input, S_IRUGO, show_occ_temp_input, NULL, 8);
++static SENSOR_DEVICE_ATTR(temp9_input, S_IRUGO, show_occ_temp_input, NULL, 9);
++static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_occ_temp_label, NULL, 1);
++static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, show_occ_temp_label, NULL, 2);
++static SENSOR_DEVICE_ATTR(temp3_label, S_IRUGO, show_occ_temp_label, NULL, 3);
++static SENSOR_DEVICE_ATTR(temp4_label, S_IRUGO, show_occ_temp_label, NULL, 4);
++static SENSOR_DEVICE_ATTR(temp5_label, S_IRUGO, show_occ_temp_label, NULL, 5);
++static SENSOR_DEVICE_ATTR(temp6_label, S_IRUGO, show_occ_temp_label, NULL, 6);
++static SENSOR_DEVICE_ATTR(temp7_label, S_IRUGO, show_occ_temp_label, NULL, 7);
++static SENSOR_DEVICE_ATTR(temp8_label, S_IRUGO, show_occ_temp_label, NULL, 8);
++static SENSOR_DEVICE_ATTR(temp9_label, S_IRUGO, show_occ_temp_label, NULL, 9);
++
++static SENSOR_DEVICE_ATTR(power1_input, S_IRUGO, show_occ_power_input, NULL, 1);
++static SENSOR_DEVICE_ATTR(power1_label, S_IRUGO, show_occ_power_label, NULL, 1);
++static SENSOR_DEVICE_ATTR(power2_input, S_IRUGO, show_occ_power_input, NULL, 2);
++static SENSOR_DEVICE_ATTR(power2_label, S_IRUGO, show_occ_power_label, NULL, 2);
++static SENSOR_DEVICE_ATTR(power3_input, S_IRUGO, show_occ_power_input, NULL, 3);
++static SENSOR_DEVICE_ATTR(power3_label, S_IRUGO, show_occ_power_label, NULL, 3);
++static SENSOR_DEVICE_ATTR(power4_input, S_IRUGO, show_occ_power_input, NULL, 4);
++static SENSOR_DEVICE_ATTR(power4_label, S_IRUGO, show_occ_power_label, NULL, 4);
++
++static SENSOR_DEVICE_ATTR(freq1_input, S_IRUGO, show_occ_freq_input, NULL, 1);
++static SENSOR_DEVICE_ATTR(freq1_label, S_IRUGO, show_occ_freq_label, NULL, 1);
++static SENSOR_DEVICE_ATTR(freq2_input, S_IRUGO, show_occ_freq_input, NULL, 2);
++static SENSOR_DEVICE_ATTR(freq2_label, S_IRUGO, show_occ_freq_label, NULL, 2);
++static SENSOR_DEVICE_ATTR(freq3_input, S_IRUGO, show_occ_freq_input, NULL, 3);
++static SENSOR_DEVICE_ATTR(freq3_label, S_IRUGO, show_occ_freq_label, NULL, 3);
++static SENSOR_DEVICE_ATTR(freq4_input, S_IRUGO, show_occ_freq_input, NULL, 4);
++static SENSOR_DEVICE_ATTR(freq4_label, S_IRUGO, show_occ_freq_label, NULL, 4);
++
++static struct attribute *occ_attrs[] = {
++	&sensor_dev_attr_temp1_input.dev_attr.attr,
++	&sensor_dev_attr_temp2_input.dev_attr.attr,
++	&sensor_dev_attr_temp3_input.dev_attr.attr,
++	&sensor_dev_attr_temp4_input.dev_attr.attr,
++	&sensor_dev_attr_temp5_input.dev_attr.attr,
++	&sensor_dev_attr_temp6_input.dev_attr.attr,
++	&sensor_dev_attr_temp7_input.dev_attr.attr,
++	&sensor_dev_attr_temp8_input.dev_attr.attr,
++	&sensor_dev_attr_temp9_input.dev_attr.attr,
++	&sensor_dev_attr_temp1_label.dev_attr.attr,
++	&sensor_dev_attr_temp2_label.dev_attr.attr,
++	&sensor_dev_attr_temp3_label.dev_attr.attr,
++	&sensor_dev_attr_temp4_label.dev_attr.attr,
++	&sensor_dev_attr_temp5_label.dev_attr.attr,
++	&sensor_dev_attr_temp6_label.dev_attr.attr,
++	&sensor_dev_attr_temp7_label.dev_attr.attr,
++	&sensor_dev_attr_temp8_label.dev_attr.attr,
++	&sensor_dev_attr_temp9_label.dev_attr.attr,
++	&sensor_dev_attr_power1_input.dev_attr.attr,
++	&sensor_dev_attr_power2_input.dev_attr.attr,
++	&sensor_dev_attr_power3_input.dev_attr.attr,
++	&sensor_dev_attr_power4_input.dev_attr.attr,
++	&sensor_dev_attr_power1_label.dev_attr.attr,
++	&sensor_dev_attr_power2_label.dev_attr.attr,
++	&sensor_dev_attr_power3_label.dev_attr.attr,
++	&sensor_dev_attr_power4_label.dev_attr.attr,
++	&sensor_dev_attr_freq1_input.dev_attr.attr,
++	&sensor_dev_attr_freq2_input.dev_attr.attr,
++	&sensor_dev_attr_freq3_input.dev_attr.attr,
++	&sensor_dev_attr_freq4_input.dev_attr.attr,
++	&sensor_dev_attr_freq1_label.dev_attr.attr,
++	&sensor_dev_attr_freq2_label.dev_attr.attr,
++	&sensor_dev_attr_freq3_label.dev_attr.attr,
++	&sensor_dev_attr_freq4_label.dev_attr.attr,
++
++	NULL
++};
++ATTRIBUTE_GROUPS(occ);
++
++#endif
++
++static struct sensor_device_attribute temp_input[] = {
++	SENSOR_ATTR(temp1_input, S_IRUGO, show_occ_temp_input, NULL, 1),
++	SENSOR_ATTR(temp2_input, S_IRUGO, show_occ_temp_input, NULL, 2),
++	SENSOR_ATTR(temp3_input, S_IRUGO, show_occ_temp_input, NULL, 3),
++	SENSOR_ATTR(temp4_input, S_IRUGO, show_occ_temp_input, NULL, 4),
++	SENSOR_ATTR(temp5_input, S_IRUGO, show_occ_temp_input, NULL, 5),
++	SENSOR_ATTR(temp6_input, S_IRUGO, show_occ_temp_input, NULL, 6),
++	SENSOR_ATTR(temp7_input, S_IRUGO, show_occ_temp_input, NULL, 7),
++	SENSOR_ATTR(temp8_input, S_IRUGO, show_occ_temp_input, NULL, 8),
++	SENSOR_ATTR(temp9_input, S_IRUGO, show_occ_temp_input, NULL, 9),
++	SENSOR_ATTR(temp10_input, S_IRUGO, show_occ_temp_input, NULL, 10),
++	SENSOR_ATTR(temp11_input, S_IRUGO, show_occ_temp_input, NULL, 11),
++	SENSOR_ATTR(temp12_input, S_IRUGO, show_occ_temp_input, NULL, 12),
++	SENSOR_ATTR(temp13_input, S_IRUGO, show_occ_temp_input, NULL, 13),
++	SENSOR_ATTR(temp14_input, S_IRUGO, show_occ_temp_input, NULL, 14),
++	SENSOR_ATTR(temp15_input, S_IRUGO, show_occ_temp_input, NULL, 15),
++	SENSOR_ATTR(temp16_input, S_IRUGO, show_occ_temp_input, NULL, 16),
++	SENSOR_ATTR(temp17_input, S_IRUGO, show_occ_temp_input, NULL, 17),
++	SENSOR_ATTR(temp18_input, S_IRUGO, show_occ_temp_input, NULL, 18),
++	SENSOR_ATTR(temp19_input, S_IRUGO, show_occ_temp_input, NULL, 19),
++	SENSOR_ATTR(temp20_input, S_IRUGO, show_occ_temp_input, NULL, 20),
++	SENSOR_ATTR(temp21_input, S_IRUGO, show_occ_temp_input, NULL, 21),
++	SENSOR_ATTR(temp22_input, S_IRUGO, show_occ_temp_input, NULL, 22),
++};
++
++static struct sensor_device_attribute temp_label[] = {
++	SENSOR_ATTR(temp1_label, S_IRUGO, show_occ_temp_label, NULL, 1),
++	SENSOR_ATTR(temp2_label, S_IRUGO, show_occ_temp_label, NULL, 2),
++	SENSOR_ATTR(temp3_label, S_IRUGO, show_occ_temp_label, NULL, 3),
++	SENSOR_ATTR(temp4_label, S_IRUGO, show_occ_temp_label, NULL, 4),
++	SENSOR_ATTR(temp5_label, S_IRUGO, show_occ_temp_label, NULL, 5),
++	SENSOR_ATTR(temp6_label, S_IRUGO, show_occ_temp_label, NULL, 6),
++	SENSOR_ATTR(temp7_label, S_IRUGO, show_occ_temp_label, NULL, 7),
++	SENSOR_ATTR(temp8_label, S_IRUGO, show_occ_temp_label, NULL, 8),
++	SENSOR_ATTR(temp9_label, S_IRUGO, show_occ_temp_label, NULL, 9),
++	SENSOR_ATTR(temp10_label, S_IRUGO, show_occ_temp_label, NULL, 10),
++	SENSOR_ATTR(temp11_label, S_IRUGO, show_occ_temp_label, NULL, 11),
++	SENSOR_ATTR(temp12_label, S_IRUGO, show_occ_temp_label, NULL, 12),
++	SENSOR_ATTR(temp13_label, S_IRUGO, show_occ_temp_label, NULL, 13),
++	SENSOR_ATTR(temp14_label, S_IRUGO, show_occ_temp_label, NULL, 14),
++	SENSOR_ATTR(temp15_label, S_IRUGO, show_occ_temp_label, NULL, 15),
++	SENSOR_ATTR(temp16_label, S_IRUGO, show_occ_temp_label, NULL, 16),
++	SENSOR_ATTR(temp17_label, S_IRUGO, show_occ_temp_label, NULL, 17),
++	SENSOR_ATTR(temp18_label, S_IRUGO, show_occ_temp_label, NULL, 18),
++	SENSOR_ATTR(temp19_label, S_IRUGO, show_occ_temp_label, NULL, 19),
++	SENSOR_ATTR(temp20_label, S_IRUGO, show_occ_temp_label, NULL, 20),
++	SENSOR_ATTR(temp21_label, S_IRUGO, show_occ_temp_label, NULL, 21),
++	SENSOR_ATTR(temp22_label, S_IRUGO, show_occ_temp_label, NULL, 22),
++
++};
++
++#define TEMP_UNIT_ATTRS(X)                      \
++{	&temp_input[X].dev_attr.attr,           \
++	&temp_label[X].dev_attr.attr,          \
++	NULL                                    \
++}
++
++/* 10-core CPU, occ has 22 temp sensors, more socket, more sensors */
++static struct attribute *occ_temp_attr[][3] = {
++	TEMP_UNIT_ATTRS(0),
++	TEMP_UNIT_ATTRS(1),
++	TEMP_UNIT_ATTRS(2),
++	TEMP_UNIT_ATTRS(3),
++	TEMP_UNIT_ATTRS(4),
++	TEMP_UNIT_ATTRS(5),
++	TEMP_UNIT_ATTRS(6),
++	TEMP_UNIT_ATTRS(7),
++	TEMP_UNIT_ATTRS(8),
++	TEMP_UNIT_ATTRS(9),
++	TEMP_UNIT_ATTRS(10),
++	TEMP_UNIT_ATTRS(11),
++	TEMP_UNIT_ATTRS(12),
++	TEMP_UNIT_ATTRS(13),
++	TEMP_UNIT_ATTRS(14),
++	TEMP_UNIT_ATTRS(15),
++	TEMP_UNIT_ATTRS(16),
++	TEMP_UNIT_ATTRS(17),
++	TEMP_UNIT_ATTRS(18),
++	TEMP_UNIT_ATTRS(19),
++	TEMP_UNIT_ATTRS(20),
++	TEMP_UNIT_ATTRS(21),
++};
++
++static const struct attribute_group occ_temp_attr_group[] = {
++	{ .attrs = occ_temp_attr[0] },
++	{ .attrs = occ_temp_attr[1] },
++	{ .attrs = occ_temp_attr[2] },
++	{ .attrs = occ_temp_attr[3] },
++	{ .attrs = occ_temp_attr[4] },
++	{ .attrs = occ_temp_attr[5] },
++	{ .attrs = occ_temp_attr[6] },
++	{ .attrs = occ_temp_attr[7] },
++	{ .attrs = occ_temp_attr[8] },
++	{ .attrs = occ_temp_attr[9] },
++	{ .attrs = occ_temp_attr[10] },
++	{ .attrs = occ_temp_attr[11] },
++	{ .attrs = occ_temp_attr[12] },
++	{ .attrs = occ_temp_attr[13] },
++	{ .attrs = occ_temp_attr[14] },
++	{ .attrs = occ_temp_attr[15] },
++	{ .attrs = occ_temp_attr[16] },
++	{ .attrs = occ_temp_attr[17] },
++	{ .attrs = occ_temp_attr[18] },
++	{ .attrs = occ_temp_attr[19] },
++	{ .attrs = occ_temp_attr[20] },
++	{ .attrs = occ_temp_attr[21] },
++};
++
++
++static struct sensor_device_attribute freq_input[] = {
++	SENSOR_ATTR(freq1_input, S_IRUGO, show_occ_freq_input, NULL, 1),
++	SENSOR_ATTR(freq2_input, S_IRUGO, show_occ_freq_input, NULL, 2),
++	SENSOR_ATTR(freq3_input, S_IRUGO, show_occ_freq_input, NULL, 3),
++	SENSOR_ATTR(freq4_input, S_IRUGO, show_occ_freq_input, NULL, 4),
++	SENSOR_ATTR(freq5_input, S_IRUGO, show_occ_freq_input, NULL, 5),
++	SENSOR_ATTR(freq6_input, S_IRUGO, show_occ_freq_input, NULL, 6),
++	SENSOR_ATTR(freq7_input, S_IRUGO, show_occ_freq_input, NULL, 7),
++	SENSOR_ATTR(freq8_input, S_IRUGO, show_occ_freq_input, NULL, 8),
++	SENSOR_ATTR(freq9_input, S_IRUGO, show_occ_freq_input, NULL, 9),
++	SENSOR_ATTR(freq10_input, S_IRUGO, show_occ_freq_input, NULL, 10),
++};
++
++static struct sensor_device_attribute freq_label[] = {
++	SENSOR_ATTR(freq1_label, S_IRUGO, show_occ_freq_label, NULL, 1),
++	SENSOR_ATTR(freq2_label, S_IRUGO, show_occ_freq_label, NULL, 2),
++	SENSOR_ATTR(freq3_label, S_IRUGO, show_occ_freq_label, NULL, 3),
++	SENSOR_ATTR(freq4_label, S_IRUGO, show_occ_freq_label, NULL, 4),
++	SENSOR_ATTR(freq5_label, S_IRUGO, show_occ_freq_label, NULL, 5),
++	SENSOR_ATTR(freq6_label, S_IRUGO, show_occ_freq_label, NULL, 6),
++	SENSOR_ATTR(freq7_label, S_IRUGO, show_occ_freq_label, NULL, 7),
++	SENSOR_ATTR(freq8_label, S_IRUGO, show_occ_freq_label, NULL, 8),
++	SENSOR_ATTR(freq9_label, S_IRUGO, show_occ_freq_label, NULL, 9),
++	SENSOR_ATTR(freq10_label, S_IRUGO, show_occ_freq_label, NULL, 10),
++
++};
++
++#define FREQ_UNIT_ATTRS(X)                      \
++{	&freq_input[X].dev_attr.attr,           \
++	&freq_label[X].dev_attr.attr,          \
++	NULL                                    \
++}
++
++/* 10-core CPU, occ has 22 freq sensors, more socket, more sensors */
++static struct attribute *occ_freq_attr[][3] = {
++	FREQ_UNIT_ATTRS(0),
++	FREQ_UNIT_ATTRS(1),
++	FREQ_UNIT_ATTRS(2),
++	FREQ_UNIT_ATTRS(3),
++	FREQ_UNIT_ATTRS(4),
++	FREQ_UNIT_ATTRS(5),
++	FREQ_UNIT_ATTRS(6),
++	FREQ_UNIT_ATTRS(7),
++	FREQ_UNIT_ATTRS(8),
++	FREQ_UNIT_ATTRS(9),
++};
++
++static const struct attribute_group occ_freq_attr_group[] = {
++	{ .attrs = occ_freq_attr[0] },
++	{ .attrs = occ_freq_attr[1] },
++	{ .attrs = occ_freq_attr[2] },
++	{ .attrs = occ_freq_attr[3] },
++	{ .attrs = occ_freq_attr[4] },
++	{ .attrs = occ_freq_attr[5] },
++	{ .attrs = occ_freq_attr[6] },
++	{ .attrs = occ_freq_attr[7] },
++	{ .attrs = occ_freq_attr[8] },
++	{ .attrs = occ_freq_attr[9] },
++};
++
++static struct sensor_device_attribute_2 caps_curr_powercap[] = {
++	SENSOR_ATTR_2(caps_curr_powercap, S_IRUGO, show_occ_caps, NULL, 0, 1),
++};
++static struct sensor_device_attribute_2 caps_curr_powerreading[] = {
++	SENSOR_ATTR_2(caps_curr_powerreading, S_IRUGO, show_occ_caps, NULL, 1, 1),
++};
++static struct sensor_device_attribute_2 caps_norm_powercap[] = {
++	SENSOR_ATTR_2(caps_norm_powercap, S_IRUGO, show_occ_caps, NULL, 2, 1),
++};
++static struct sensor_device_attribute_2 caps_max_powercap[] = {
++	SENSOR_ATTR_2(caps_max_powercap, S_IRUGO, show_occ_caps, NULL, 3, 1),
++};
++static struct sensor_device_attribute_2 caps_min_powercap[] = {
++	SENSOR_ATTR_2(caps_min_powercap, S_IRUGO, show_occ_caps, NULL, 4, 1),
++};
++static struct sensor_device_attribute_2 caps_user_powerlimit[] = {
++	SENSOR_ATTR_2(caps_user_powerlimit, S_IRUGO, show_occ_caps, NULL, 5, 1),
++};
++#define CAPS_UNIT_ATTRS(X)                      \
++{	&caps_curr_powercap[X].dev_attr.attr,           \
++	&caps_curr_powerreading[X].dev_attr.attr,           \
++	&caps_norm_powercap[X].dev_attr.attr,           \
++	&caps_max_powercap[X].dev_attr.attr,           \
++	&caps_min_powercap[X].dev_attr.attr,           \
++	&caps_user_powerlimit[X].dev_attr.attr,           \
++	NULL                                    \
++}
++
++/* 10-core CPU, occ has 1 caps sensors */
++static struct attribute *occ_caps_attr[][7] = {
++	CAPS_UNIT_ATTRS(0),
++};
++static const struct attribute_group occ_caps_attr_group[] = {
++	{ .attrs = occ_caps_attr[0] },
++};
++
++static struct sensor_device_attribute power_input[] = {
++	SENSOR_ATTR(power1_input, S_IRUGO, show_occ_power_input, NULL, 1),
++	SENSOR_ATTR(power2_input, S_IRUGO, show_occ_power_input, NULL, 2),
++	SENSOR_ATTR(power3_input, S_IRUGO, show_occ_power_input, NULL, 3),
++	SENSOR_ATTR(power4_input, S_IRUGO, show_occ_power_input, NULL, 4),
++	SENSOR_ATTR(power5_input, S_IRUGO, show_occ_power_input, NULL, 5),
++	SENSOR_ATTR(power6_input, S_IRUGO, show_occ_power_input, NULL, 6),
++	SENSOR_ATTR(power7_input, S_IRUGO, show_occ_power_input, NULL, 7),
++	SENSOR_ATTR(power8_input, S_IRUGO, show_occ_power_input, NULL, 8),
++	SENSOR_ATTR(power9_input, S_IRUGO, show_occ_power_input, NULL, 9),
++	SENSOR_ATTR(power10_input, S_IRUGO, show_occ_power_input, NULL, 10),
++	SENSOR_ATTR(power11_input, S_IRUGO, show_occ_power_input, NULL, 11),
++};
++
++static struct sensor_device_attribute power_label[] = {
++	SENSOR_ATTR(power1_label, S_IRUGO, show_occ_power_label, NULL, 1),
++	SENSOR_ATTR(power2_label, S_IRUGO, show_occ_power_label, NULL, 2),
++	SENSOR_ATTR(power3_label, S_IRUGO, show_occ_power_label, NULL, 3),
++	SENSOR_ATTR(power4_label, S_IRUGO, show_occ_power_label, NULL, 4),
++	SENSOR_ATTR(power5_label, S_IRUGO, show_occ_power_label, NULL, 5),
++	SENSOR_ATTR(power6_label, S_IRUGO, show_occ_power_label, NULL, 6),
++	SENSOR_ATTR(power7_label, S_IRUGO, show_occ_power_label, NULL, 7),
++	SENSOR_ATTR(power8_label, S_IRUGO, show_occ_power_label, NULL, 8),
++	SENSOR_ATTR(power9_label, S_IRUGO, show_occ_power_label, NULL, 9),
++	SENSOR_ATTR(power10_label, S_IRUGO, show_occ_power_label, NULL, 10),
++	SENSOR_ATTR(power11_label, S_IRUGO, show_occ_power_label, NULL, 11),
++};
++
++#define POWER_UNIT_ATTRS(X)                      \
++{	&power_input[X].dev_attr.attr,           \
++	&power_label[X].dev_attr.attr,          \
++	NULL                                    \
++}
++
++/* 10-core CPU, occ has 11 power sensors, more socket, more sensors */
++static struct attribute *occ_power_attr[][3] = {
++	POWER_UNIT_ATTRS(0),
++	POWER_UNIT_ATTRS(1),
++	POWER_UNIT_ATTRS(2),
++	POWER_UNIT_ATTRS(3),
++	POWER_UNIT_ATTRS(4),
++	POWER_UNIT_ATTRS(5),
++	POWER_UNIT_ATTRS(6),
++	POWER_UNIT_ATTRS(7),
++	POWER_UNIT_ATTRS(8),
++	POWER_UNIT_ATTRS(9),
++	POWER_UNIT_ATTRS(10),
++};
++
++static const struct attribute_group occ_power_attr_group[] = {
++	{ .attrs = occ_power_attr[0] },
++	{ .attrs = occ_power_attr[1] },
++	{ .attrs = occ_power_attr[2] },
++	{ .attrs = occ_power_attr[3] },
++	{ .attrs = occ_power_attr[4] },
++	{ .attrs = occ_power_attr[5] },
++	{ .attrs = occ_power_attr[6] },
++	{ .attrs = occ_power_attr[7] },
++	{ .attrs = occ_power_attr[8] },
++	{ .attrs = occ_power_attr[9] },
++	{ .attrs = occ_power_attr[10] },
++};
++
++static void occ_remove_sysfs_files(struct device *dev)
++{
++	int i = 0;
++
++	for (i = 0; i < ARRAY_SIZE(occ_temp_attr_group); i++)
++		sysfs_remove_group(&dev->kobj, &occ_temp_attr_group[i]);
++
++	for (i = 0; i < ARRAY_SIZE(occ_freq_attr_group); i++)
++		sysfs_remove_group(&dev->kobj, &occ_freq_attr_group[i]);
++
++	for (i = 0; i < ARRAY_SIZE(occ_power_attr_group); i++)
++		sysfs_remove_group(&dev->kobj, &occ_power_attr_group[i]);
++
++	for (i = 0; i < ARRAY_SIZE(occ_caps_attr_group); i++)
++		sysfs_remove_group(&dev->kobj, &occ_caps_attr_group[i]);
++}
++
++
++static int occ_create_sysfs_attribute(struct device *dev)
++{
++	/* The sensor number varies for different
++	 * platform depending on core number. We'd better
++	 * create them dynamically  */
++	struct occ_drv_data *data = dev_get_drvdata(dev);
++	int i = 0;
++	int num_of_sensors = 0;
++	int ret = 0;
++
++	/* get sensor number from occ. */
++	ret = occ_update_device(dev);
++	if (ret != 0)
++	{
++		/* FIXME: to test fake data */
++		printk("ERROR: cannot get occ sensor data: %d\n", ret);
++		return ret;
++	}
++
++	if (data->occ_resp.data.blocks == NULL)
++		return -1;
++
++	/* temp sensors */
++	if (data->occ_resp.temp_block_id >= 0)
++	{
++		num_of_sensors = data->occ_resp.data.blocks[data->occ_resp.temp_block_id].num_of_sensors;
++		for (i = 0; i < num_of_sensors; i++)
++		{
++			//printk("create temp group: %d\n", i);
++			//ret = sysfs_create_group(&dev->kobj, &occ_temp_attr_group[i]);
++			ret = sysfs_create_group(&data->hwmon_dev->kobj, &occ_temp_attr_group[i]);
++			if (ret)
++			{
++				dev_err(dev, "error create temp sysfs entry\n");
++				goto error;
++			}
++		}
++	}
++
++	/* freq sensors */
++	if (data->occ_resp.freq_block_id >= 0)
++	{
++		num_of_sensors = data->occ_resp.data.blocks[data->occ_resp.freq_block_id].num_of_sensors;
++		for (i = 0; i < num_of_sensors; i++)
++		{
++			//printk("create freq group: %d\n", i);
++			//ret = sysfs_create_group(&dev->kobj, &occ_temp_attr_group[i]);
++			ret = sysfs_create_group(&data->hwmon_dev->kobj, &occ_freq_attr_group[i]);
++			if (ret)
++			{
++				dev_err(dev, "error create freq sysfs entry\n");
++				goto error;
++			}
++		}
++	}
++
++	/* power sensors */
++	//printk("power_block_id: %d\n", data->occ_resp.power_block_id);
++	if (data->occ_resp.power_block_id >= 0)
++	{
++		num_of_sensors = data->occ_resp.data.blocks[data->occ_resp.power_block_id].num_of_sensors;
++		for (i = 0; i < num_of_sensors; i++)
++		{
++			//printk("create power group: %d\n", i);
++			//ret = sysfs_create_group(&dev->kobj, &occ_temp_attr_group[i]);
++			ret = sysfs_create_group(&data->hwmon_dev->kobj, &occ_power_attr_group[i]);
++			if (ret)
++			{
++				dev_err(dev, "error create power sysfs entry\n");
++				goto error;
++			}
++		}
++	}
++
++	/* caps sensors */
++	//printk("caps_block_id: %d\n", data->occ_resp.caps_block_id);
++	if (data->occ_resp.caps_block_id >= 0)
++	{
++		num_of_sensors = data->occ_resp.data.blocks[data->occ_resp.caps_block_id].num_of_sensors;
++		for (i = 0; i < num_of_sensors; i++)
++		{
++			//printk("create caps group: %d\n", i);
++			//ret = sysfs_create_group(&dev->kobj, &occ_temp_attr_group[i]);
++			ret = sysfs_create_group(&data->hwmon_dev->kobj, &occ_caps_attr_group[i]);
++			if (ret)
++			{
++				dev_err(dev, "error create caps sysfs entry\n");
++				goto error;
++			}
++		}
++	}
++
++	return 0;
++error:
++	occ_remove_sysfs_files(data->hwmon_dev);
++	return ret;
++}
++
++/*-----------------------------------------------------------------------*/
++/* device probe and removal */
++
++#define OCC_I2C_ADDR 0x50
++#define OCC_I2C_NAME "occ-i2c"
++
++enum occ_type {
++	occ_id,
++};
++
++static int occ_probe(struct i2c_client *client, const struct i2c_device_id *id)
++{
++	struct device *dev = &client->dev;
++	struct occ_drv_data *data;
++	unsigned long funcs;
++	struct device_node *np = dev->of_node;
++	//u32 pval = 0;
++	int ret = 0;
++
++	data = devm_kzalloc(dev, sizeof(struct occ_drv_data), GFP_KERNEL);
++	if (!data)
++		return -ENOMEM;
++
++	data->client = client;
++	i2c_set_clientdata(client, data);
++	mutex_init(&data->update_lock);
++	data->sample_time = HZ;
++
++	/* Yi: i2c-core should assign address to
++	 * client when detection - but it does not work  FIXME  */
++	//client->addr = OCC_I2C_ADDR;
++
++	/* Yi: read address from device table */
++	//if (of_property_read_u32(np, "reg", &pval)) {
++	//	dev_err(&client->dev, "invalid reg\n");
++	//}
++	//client->addr = pval;
++
++	/* configure the driver */
++	//dev_dbg(dev, "occ register hwmon @0x%x\n", client->addr);
++	//data->hwmon_dev = hwmon_device_register_with_groups(dev, "occ",
++	//						    data, occ_groups);
++
++	/* Yi: try to create sysfs attributes dynamically */
++	data->hwmon_dev = hwmon_device_register(dev);
++	if (IS_ERR(data->hwmon_dev))
++		return PTR_ERR(data->hwmon_dev);
++
++	ret = occ_create_sysfs_attribute(dev);
++	if (ret)
++	{
++		hwmon_device_unregister(data->hwmon_dev);
++		return ret;
++	}
++
++	data->hwmon_dev->parent = dev;
++
++	//dev_dbg(dev, "%s: sensor '%s'\n",
++	//	 dev_name(data->hwmon_dev), client->name);
++
++	funcs = i2c_get_functionality(client->adapter);
++	//dev_info(dev, "i2c adaptor supports function: 0x%lx\n", funcs);
++
++	/* Yi: seems always error? disable for now */
++	//occ_check_i2c_errors(client);
++
++	//dev_info(dev, "occ i2c driver ready: i2c addr@0x%x\n", client->addr);
++	printk("occ i2c driver ready: i2c addr@0x%x\n", client->addr);
++
++	return 0;
++}
++
++static int occ_remove(struct i2c_client *client)
++{
++	struct occ_drv_data *data = i2c_get_clientdata(client);
++
++	/* free allocated sensor memory */
++	deinit_occ_resp_buf(&data->occ_resp);
++
++	//occ_remove_sysfs_files(&client->dev);
++	occ_remove_sysfs_files(data->hwmon_dev);
++	hwmon_device_unregister(data->hwmon_dev);
++	return 0;
++}
++
++/* used for old-style board info */
++static const struct i2c_device_id occ_ids[] = {
++	{ OCC_I2C_NAME, occ_id, },
++	{ /* LIST END */ }
++};
++MODULE_DEVICE_TABLE(i2c, occ_ids);
++
++static const struct of_device_id i2c_occ_of_match[] = {
++	{.compatible = "ibm,occ-i2c"},
++	{},
++};
++
++MODULE_DEVICE_TABLE(of, i2c_occ_of_match);
++
++#ifdef CONFIG_PM
++static int occ_suspend(struct device *dev)
++{
++	//struct i2c_client *client = to_i2c_client(dev);
++	/* TODO */
++	return 0;
++}
++
++static int occ_resume(struct device *dev)
++{
++	//struct i2c_client *client = to_i2c_client(dev);
++	/* TODO */
++	return 0;
++}
++
++static const struct dev_pm_ops occ_dev_pm_ops = {
++	.suspend	= occ_suspend,
++	.resume		= occ_resume,
++};
++#define OCC_DEV_PM_OPS (&occ_dev_pm_ops)
++#else
++#define OCC_DEV_PM_OPS NULL
++#endif /* CONFIG_PM */
++
++/* Yi: i2c-core uses i2c-detect() to detect device in bellow address list.
++   If exists, address will be assigned to client.
++ * It is also possible to read address from device table. */
++static const unsigned short normal_i2c[] = {0x50, 0x51, I2C_CLIENT_END };
++
++/* Return 0 if detection is successful, -ENODEV otherwise */
++static int occ_detect(struct i2c_client *new_client,
++		       struct i2c_board_info *info)
++{
++	/* i2c-core need this function to create new device */
++	strncpy(info->type, OCC_I2C_NAME, sizeof(OCC_I2C_NAME));
++	return 0;
++}
++
++static struct i2c_driver occ_driver = {
++	.class		= I2C_CLASS_HWMON,
++	.driver = {
++		.name	= OCC_I2C_NAME,
++		.pm	= OCC_DEV_PM_OPS,
++		.of_match_table = i2c_occ_of_match,
++	},
++	.probe		= occ_probe,
++	.remove		= occ_remove,
++	.id_table	= occ_ids,
++	.address_list	= normal_i2c,
++	.detect		= occ_detect,
++};
++
++module_i2c_driver(occ_driver);
++
++#if 0
++/* Create new i2c device */
++static struct i2c_board_info my_dev_info[] __initdata = {
++	{
++		I2C_BOARD_INFO(OCC_I2C_NAME, 0x50),
++	},
++};
++
++static struct i2c_client *my_client;
++
++static int occ_init(void)
++{
++	static int sys_adap_bus_num = 3;
++	struct i2c_adapter* adap = i2c_get_adapter(sys_adap_bus_num);
++
++	if(adap==NULL) {
++		printk("[OCC-DEBUG] i2c_get_adapter fail!\n");
++		return -1;
++	}
++
++	my_client = i2c_new_device(adap, &my_dev_info[0]);
++	if( my_client==NULL ){
++		printk("[OCC-DEBUG] i2c_new_device fail!\n");
++		return -1;
++	}
++	i2c_put_adapter(adap);
++	return i2c_add_driver(&occ_driver);
++}
++
++static void __exit occ_exit(void)
++{
++	i2c_unregister_device(my_client);
++	i2c_del_driver(&occ_driver);
++}
++
++module_init(occ_init);
++module_exit(occ_exit);
++
++#endif
++
++MODULE_AUTHOR("Li Yi <shliyi@cn.ibm.com>");
++MODULE_DESCRIPTION("BMC OCC monitor driver");
++MODULE_LICENSE("GPL");
diff --git a/meta-openbmc-machines/meta-openpower/meta-rackspace/meta-barreleye/recipes-kernel/linux/linux-obmc_%.bbappend b/meta-openbmc-machines/meta-openpower/meta-rackspace/meta-barreleye/recipes-kernel/linux/linux-obmc_%.bbappend
index b106e5a..1099689 100644
--- a/meta-openbmc-machines/meta-openpower/meta-rackspace/meta-barreleye/recipes-kernel/linux/linux-obmc_%.bbappend
+++ b/meta-openbmc-machines/meta-openpower/meta-rackspace/meta-barreleye/recipes-kernel/linux/linux-obmc_%.bbappend
@@ -1 +1,3 @@
 FILESEXTRAPATHS_prepend := "${THISDIR}/linux-obmc:"
+SRC_URI += "file://barreleye.cfg"
+SRC_URI += "file://occ_hwmon.patch"