)]}' { "log": [ { "commit": "e32643cc1d2e68eba52b00758e2d7950223ae273", "tree": "513005ce403ee238492f4ca54e50bf56c7e8c197", "parents": [ "e234b3ee7fe86ee3862568be611e793291927959" ], "author": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Fri Mar 15 10:52:28 2024 -0500" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Fri Mar 22 11:10:32 2024 +0000" }, "message": "treewide: remove meta-poky usage\n\nUpstream poky made a commit that adds an `/etc/motd` with a strong\nwarning that meta-poky is not intended to be used for production\npurposes. There isn\u0027t anything we use directly from meta-poky anymore,\nso clean up all references to it.\n\nSee poky commit a226865c8683398b5f58628ba2ec5aee1ee6c19d for additional\ncontext.\n\nWe could potentially switch from using the `poky` subtree to picking\nup OECore directly, but right now it also provides us a qualified set of\nOECore + bitbake.\n\nTested: Built yosemite4 and confirmed `motd` output is absent when\nSSHing in.\n\nSigned-off-by: Patrick Williams \u003cpatrick@stwcx.xyz\u003e\nChange-Id: I9c08650d2278b3ba26794c009adad3e593767f58\n" }, { "commit": "e234b3ee7fe86ee3862568be611e793291927959", "tree": "eb85b90d3c1945a4d8494d9a032682b640a83abf", "parents": [ "a45370bdbd0aeb349573573cf9d51712708e65f1" ], "author": { "name": "Eric", "email": "Eric_LC_Chen@wiwynn.com", "time": "Thu Mar 21 11:23:00 2024 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Fri Mar 22 11:09:51 2024 +0000" }, "message": "meta-facebook: yosemite4: support nct7363 hwmon driver\n\nAdd nct7363 to kernel config.\n\nTested: check hwmon file path - pass\n\nSigned-off-by: Delphine CC Chiu \u003cDelphine_CC_Chiu@wiwynn.com\u003e\nChange-Id: I4a510fbaa3fa1068c0a5cf367e2cfecc3d43ef0c\n" }, { "commit": "a45370bdbd0aeb349573573cf9d51712708e65f1", "tree": "d041ed5a05e48f8c7437c53f12318ca271dfcdb8", "parents": [ "4216c3c816a29ef00728c6e8ba201b8064d1e442" ], "author": { "name": "Yang Chen", "email": "yang.chen@quantatw.com", "time": "Fri Mar 22 14:48:42 2024 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Fri Mar 22 11:09:29 2024 +0000" }, "message": "meta-facebook: minerva: Enable LTC4286 kernel config\n\nEnable LTC4286 kernel config for sensors.\n\nChange-Id: Ic9cca726ff4a580bce005ab4e92b440292339e38\nSigned-off-by: Yang Chen \u003cyang.chen@quantatw.com\u003e\n" }, { "commit": "4216c3c816a29ef00728c6e8ba201b8064d1e442", "tree": "08d2556877b5dbe905588040514b3a08decd6665", "parents": [ "82cb8106f66d0f11d98e508f8c88d605a2f691a6" ], "author": { "name": "Yang Chen", "email": "yang.chen@quantatw.com", "time": "Fri Mar 22 14:09:46 2024 +0800" }, "committer": { "name": "Yang Chen", "email": "yang.chen@quantatw.com", "time": "Fri Mar 22 14:09:46 2024 +0800" }, "message": "meta-facebook: minerva: modify kernel device tree\n\nModify KERNEL_DEVICETREE from ast2600-evb to minerva dtb.\n\nChange-Id: I591d36af0b12c212ba8ba7758bb481d1f77c547b\nSigned-off-by: Yang Chen \u003cyang.chen@quantatw.com\u003e\n" }, { "commit": "f27771e3de85cbdf6531370c74e4fb0e6f800483", "tree": "65318a6c2c649d48c4ca5debe11158da3c0d35ff", "parents": [ "72972ba4d787f94904e73f976af36ab472e09533" ], "author": { "name": "Ed Tanous", "email": "ed@tanous.net", "time": "Thu Feb 22 09:40:30 2024 -0800" }, "committer": { "name": "Ed Tanous", "email": "ed@tanous.net", "time": "Tue Mar 19 19:38:58 2024 +0000" }, "message": "Remove bmcweb logging and rely on defaults\n\nOnce https://gerrit.openbmc.org/c/openbmc/bmcweb/+/69480 is merged,\nany system not taking the defaults can be removed. Across the project\nwe should be consistent to make sure that the default behavior doesn\u0027t\ncause log spamming or performance degredation.\n\nSigned-off-by: Ed Tanous \u003ced@tanous.net\u003e\nChange-Id: I95f319e6247f9b7dcf61e0d00c4366809bf3eba5\n" }, { "commit": "b2a9ef79d46411087e0ac6acaa1328003f54aa1e", "tree": "425cd929aeca14b7f03821cc1bb52f28fc19a495", "parents": [ "9afd92ec4d8f5357e37a3ee9003cf68ed7c582e1" ], "author": { "name": "Yang Chen", "email": "yang.chen@quantatw.com", "time": "Thu Feb 22 10:21:05 2024 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Fri Mar 15 16:09:39 2024 +0000" }, "message": "meta-facebook: minerva: Assign OBMC_CONSOLE_TTYS value\n\nDue to OBMC_CONSOLE_TTYS:fb-nohost assign empty by fb-console.inc, so add in obmc-console_%.bbappend that the obmc-console-client can work.\n\nChange-Id: I1213b71b0ec693408f55ffa06a15ff2902c91d2d\nSigned-off-by: Yang Chen \u003cyang.chen@quantatw.com\u003e\n" }, { "commit": "9afd92ec4d8f5357e37a3ee9003cf68ed7c582e1", "tree": "67eb837736ec2eed59762c7ce359c7e5328c89a4", "parents": [ "88f674e19ac3ad5fd709782bf993c2299eef54e6" ], "author": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Thu Feb 15 15:28:34 2024 -0600" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Fri Mar 15 15:48:21 2024 +0000" }, "message": "meta-facebook: phosphor-state-manager: move greatlakes overrides to system\n\nGreatlakes was a prototype and introduced a lot of noise at the top\nlevel. Move this into the system-specific side.\n\nSigned-off-by: Patrick Williams \u003cpatrick@stwcx.xyz\u003e\nChange-Id: Ibf3310c7e3ccc4d400f5d422ef577fb2bfdbd685\n" }, { "commit": "88f674e19ac3ad5fd709782bf993c2299eef54e6", "tree": "91a460c2604a2de0628e642d973915289f44c5da", "parents": [ "748179ac8a8974d0f20c36ba7dfa5b695f081de6" ], "author": { "name": "Yang Chen", "email": "yang.chen@quantatw.com", "time": "Fri Mar 15 20:51:02 2024 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Fri Mar 15 15:48:10 2024 +0000" }, "message": "meta-facebook: minerva: gpio: correct deassert messages\n\nCorrect the string used in the service of the GPIO monitor.\n\nChange-Id: I65da12b289d4a5a4177850fc3ca21e7473a75972\nSigned-off-by: Yang Chen \u003cyang.chen@quantatw.com\u003e\n" }, { "commit": "748179ac8a8974d0f20c36ba7dfa5b695f081de6", "tree": "ef62a22908b5c162eb35aeba2e95c3506198bdf4", "parents": [ "12acc1dab9b99baf68d6409c396f49912886698b" ], "author": { "name": "Peter Yin", "email": "peter.yin@quantatw.com", "time": "Fri Mar 15 13:32:12 2024 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Fri Mar 15 15:19:02 2024 +0000" }, "message": "meta-facebook: harma: kernel device tree modify\n\nModify KERNEL_DEVICETREE path to harma dtb.\n\nChange-Id: I675697a093f223ae9539b218fec54545123475a7\nSigned-off-by: Peter Yin \u003cpeter.yin@quantatw.com\u003e\n" }, { "commit": "12acc1dab9b99baf68d6409c396f49912886698b", "tree": "8b22b398ae1ddc099e6dde81fe19648e3820c3b5", "parents": [ "17a87463d8cceb500b04cb4d057e7108447ce30d" ], "author": { "name": "Yang Chen", "email": "yang.chen@quantatw.com", "time": "Wed Jan 31 15:21:03 2024 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Fri Mar 15 12:41:45 2024 +0000" }, "message": "meta-facebook: minerva: add service to monitor fan status\n\nMinerva rack has six fan control boards (FCB) and each has four fan\nmodules, CMM should monitor each FCB presence and fan sensor status to\ncontrol one fan status LED on the CMM front panel.\n\nChange-Id: I7c7eb4043ceefead5fa25c0ffad14b88649d5e81\nSigned-off-by: Yang Chen \u003cyang.chen@quantatw.com\u003e\nSigned-off-by: Yi-Shum \u003cEasonChen1@quantatw.com\u003e\n" }, { "commit": "17a87463d8cceb500b04cb4d057e7108447ce30d", "tree": "3d59f7a031738f8d9824fb28fa0ed7bcf735037e", "parents": [ "9c7a5878a11cc8a7c87faf4ca33ab65400abd7da" ], "author": { "name": "Yang Chen", "email": "yang.chen@quantatw.com", "time": "Thu Feb 22 22:15:57 2024 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Fri Mar 15 12:41:07 2024 +0000" }, "message": "meta-facebook: minerva: Add monitor AC power good on each blade\n\nMonitor AC power good on each blade (16 MTIA blades + 6 network blades).\n\nChange-Id: Idf074289e9f5439956cae2f2859ca16d7e47ec05\nSigned-off-by: Yang Chen \u003cyang.chen@quantatw.com\u003e\n" }, { "commit": "9c7a5878a11cc8a7c87faf4ca33ab65400abd7da", "tree": "6ad614e11fae0a5a0338f2d753a0ad47c1243782", "parents": [ "54a312c93b92e1a310c275d73c723217be8c55db" ], "author": { "name": "Yang Chen", "email": "yang.chen@quantatw.com", "time": "Fri Feb 23 09:33:51 2024 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Fri Mar 15 12:40:38 2024 +0000" }, "message": "meta-facebook: minerva: Modify GPIO name to align DTS\n\nModify GPIO name use in minerva-early-sys-init to align DTS naming.\n\nChange-Id: If09ff2ab06bfc51205e34dba2935e0c0c1be6145\nSigned-off-by: Yang Chen \u003cyang.chen@quantatw.com\u003e\n" }, { "commit": "640b8fff6c11652ba593be6b084efe6a342680ac", "tree": "fe69ef59e9f5ea4e6184aab4863b5756d30d12d4", "parents": [ "c10f5a3f44a984e026b6b0f5b5b679fcb0d211dd" ], "author": { "name": "Yi-Shum", "email": "EasonChen1@quantatw.com", "time": "Fri Mar 15 11:10:15 2024 +0800" }, "committer": { "name": "Yi-Shum", "email": "EasonChen1@quantatw.com", "time": "Fri Mar 15 11:10:15 2024 +0800" }, "message": "meta-facebook: phosphor-network: rename config file\n\n- Bletchley cannot apply the MAC address obtained from the FRU (stored in \"/etc/systemd/nework/00-bmc-eth0.nework\") because the file has a lower priority than the default setting \"/usr/lib/systemd/network/00-bmc-eth.network\".\n- Fixed by renaming network default config file from \"00-bmc-eth.network\" to \"01-bmc-eth.network\".\n\nChange-Id: If97068b026c0cdccbfffe14d940461f5bad7e81c\nSigned-off-by: Yi-Shum \u003cEasonChen1@quantatw.com\u003e\n" }, { "commit": "0598b574e8a02209ba089c9bfadd6c5a9cc0b3b0", "tree": "65880a5b76e995aa0e5e97712d6e982a79075127", "parents": [ "9c40b39ecccb09f54c5d31ece58bfbc017bbc5d8" ], "author": { "name": "Chris Wang", "email": "Chris_Wang@wiwynn.com", "time": "Tue Mar 12 17:29:15 2024 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Wed Mar 13 02:13:44 2024 +0000" }, "message": "meta-facebook: yosemite4: Support NIC endpoint setup\n\nSetup the MCTP Endpoint for the NIC when inserted.\nRemove the MCTP Endpoint for the NIC when unplugged.\n\nChange-Id: I0c36cecda6509a64e4f26c70bf61590467571a7b\nSigned-off-by: Delphine CC Chiu \u003cDelphine_CC_Chiu@wiwynn.com\u003e\n" }, { "commit": "9c40b39ecccb09f54c5d31ece58bfbc017bbc5d8", "tree": "71c40e43f1d98b833c75b0079631d2ee2b61dbdf", "parents": [ "02defcc0c288fb9c030b3db53cef14d25459942b" ], "author": { "name": "Delphine CC Chiu", "email": "Delphine_CC_Chiu@wiwynn.com", "time": "Fri Mar 01 17:48:45 2024 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Wed Mar 13 02:09:17 2024 +0000" }, "message": "meta-facebook: yosemite4: Add config for OCP debug card\n\nSetup config for OCP debug card\n\nTested: tested on yv4 system.\n\nChange-Id: I908c7d6927d76d5a8165727c9d0dd77d52f2ffe2\nSigned-off-by: Delphine CC Chiu \u003cDelphine_CC_Chiu@wiwynn.com\u003e\n" }, { "commit": "2e7e2a02c8065c0b6b623ba95746a6d7e45147f0", "tree": "b9814fb574c99f762861292fe5e663286e21845f", "parents": [ "5c048c0b2673220c8f15f02f7ed8a45c099e4611" ], "author": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Fri Mar 08 21:46:22 2024 -0600" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Mon Mar 11 15:18:37 2024 +0000" }, "message": "meta-facebook: fb-consoles: add vardeps\n\nThe console variable is, by default, based on a number of variables\nsuch as OBMC_HOST_INSTANCES. These variables need to be in the vardeps\nso that the console variable is updated when these variables change.\n\nSigned-off-by: Patrick Williams \u003cpatrick@stwcx.xyz\u003e\nChange-Id: I6f60f0a4e82c41dddea1408ac8d490ebef826c52\n" }, { "commit": "5c048c0b2673220c8f15f02f7ed8a45c099e4611", "tree": "6a1fced15d13adfdd25637e5e425cd8f8e353c5d", "parents": [ "b81c1fb76edaf43e864854cb668fd5e7b1f88816" ], "author": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Fri Mar 08 19:46:02 2024 -0600" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Mon Mar 11 15:18:37 2024 +0000" }, "message": "meta-facebook: systemd: enable persistent journal\n\nSigned-off-by: Patrick Williams \u003cpatrick@stwcx.xyz\u003e\nChange-Id: Ib0eaac08b11acc011766293a4e76ff1b09624297\n" }, { "commit": "d23fe061d82e27f8e43d74261e066997be836bc8", "tree": "1b2c11b041e673412aeb75b2e05dcc74e0eb88fb", "parents": [ "5b1b156c16e71a0ade06ae2f07efff20d9b1b19c" ], "author": { "name": "cchoux", "email": "cosmo.chou@quantatw.com", "time": "Sat Mar 09 21:28:38 2024 +0800" }, "committer": { "name": "cchoux", "email": "cosmo.chou@quantatw.com", "time": "Sat Mar 09 21:44:22 2024 +0800" }, "message": "meta-facebook: correct SOCKET_ID of hostlogger\n\n1. The socket ID should match obmc-console.\n2. Remove unused/incorrect do_install; The config files are\nalready installed by phosphor-hostlogger_git.bb\n\nTested:\nCheck if hostlogger services started successfully.\n\nChange-Id: I39a8cc914172398eac11fba619f399912460856d\nSigned-off-by: Cosmo Chou \u003ccosmo.chou@quantatw.com\u003e\n" }, { "commit": "e1a5cf4af5172268d3d21525d79102bc308444f1", "tree": "c52643b05b1be74a39366c122afdbabc9fcca034", "parents": [ "f8998cf443e44f05fb8621289b697fe221f9bf1f" ], "author": { "name": "Peter Yin", "email": "peter.yin@quantatw.com", "time": "Wed Jan 31 16:45:35 2024 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Fri Mar 08 15:24:53 2024 +0000" }, "message": "meta-facebook: harma: remove CPU_CRIT_TGT in health monitor config\n\nOur SIT team reported an issue that SSH will disconnect by the remote host when doing the stress by the script (while 1 to reading firmware version) on multiple terminals. After we reproduced on our side, we found that CPU usage will be over 90 % during stress and then cause BMC to reboot by health monitor. We remove reboot.target in CPU_CRIT_TGT from CPU critical threshold to avoid this issue.\n\nChange-Id: Iaa5ebaed5fc1d1b39c47228d151d7bb19a17e76c\nSigned-off-by: Peter Yin \u003cpeter.yin@quantatw.com\u003e\n" }, { "commit": "f8998cf443e44f05fb8621289b697fe221f9bf1f", "tree": "9031be1eeed1c1e3144c4b6d1ec1c6f741059eab", "parents": [ "0c8f4e288d73407e1f516fa1adbb733103add7d5" ], "author": { "name": "Delphine CC Chiu", "email": "Delphine_CC_Chiu@wiwynn.com", "time": "Fri Mar 08 18:05:52 2024 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Fri Mar 08 15:24:01 2024 +0000" }, "message": "meta-facebook: yosemite4: disable health target\n\nRemove reboot target.\n\nSigned-off-by: Delphine CC Chiu \u003cDelphine_CC_Chiu@wiwynn.com\u003e\nChange-Id: I277d8a9818fb59d101b1787a48250720b7858f2b\n" }, { "commit": "0c8f4e288d73407e1f516fa1adbb733103add7d5", "tree": "dcac8546e359543d50fe28354a377e68a4816491", "parents": [ "63d39539de4dc9389229aee07903c3c4cc1ab56b" ], "author": { "name": "Peter Yin", "email": "peter.yin@quantatw.com", "time": "Thu Mar 07 09:42:13 2024 +0800" }, "committer": { "name": "peter.yin", "email": "peter.yin@quantatw.com", "time": "Fri Mar 08 12:45:02 2024 +0000" }, "message": "meta-facebook: harma: re-enable uart routing script\n\nRe-add it because it was removed incorrectly last time.\n\nChange-Id: Ia88dd1c53a2eef0402291a7c307eee1131b28d07\nSigned-off-by: Peter Yin \u003cpeter.yin@quantatw.com\u003e\n" }, { "commit": "63d39539de4dc9389229aee07903c3c4cc1ab56b", "tree": "a6b97466144c602f31f04df935f1bddec14a8571", "parents": [ "b58112e5af484d9314f6a4487b1bc8b292f952ef" ], "author": { "name": "Chris Wang", "email": "Chris_Wang@wiwynn.com", "time": "Fri Mar 08 13:15:05 2024 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Fri Mar 08 12:40:44 2024 +0000" }, "message": "meta-facebook: yosemite4: Add config for Boot Order\n\nAdd json config for 8 Hosts\u0027 Boot Order.\n\nChange-Id: I5a12f006b3ffa18ee02ac1257097197228cd75e0\nSigned-off-by: Delphine CC Chiu \u003cDelphine_CC_Chiu@wiwynn.com\u003e\n" }, { "commit": "f1b18be534bacd2e5e1fccd8fd9f42063bb7b06c", "tree": "299363a745a6dc55191145f51df0370c245f52b4", "parents": [ "d558dd80a435d7851d72cd535c3c7eb8431d91dd" ], "author": { "name": "cchoux", "email": "cosmo.chou@quantatw.com", "time": "Thu Mar 07 00:20:47 2024 +0800" }, "committer": { "name": "cchoux", "email": "cosmo.chou@quantatw.com", "time": "Thu Mar 07 00:22:02 2024 +0800" }, "message": "meta-facebook: disable intrusionsensor by default\n\ncorrect the name of the PACKAGECONFIG\n\nChange-Id: I52c4eb3cedaa8a4280a195ec9ca7bd103b6ec230\nSigned-off-by: Cosmo Chou \u003ccosmo.chou@quantatw.com\u003e\n" }, { "commit": "d558dd80a435d7851d72cd535c3c7eb8431d91dd", "tree": "7b5e9a8cd10b344d2e4caf4ebb2a3a939a069aee", "parents": [ "05c30e1042d6f421285f9274e2c9fd81fc47987d" ], "author": { "name": "Delphine CC Chiu", "email": "Delphine_CC_Chiu@wiwynn.com", "time": "Wed Mar 06 11:49:36 2024 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Wed Mar 06 15:19:06 2024 +0000" }, "message": "fb-compute-multihost: rename logfile of ttyS8\n\nTo make log files\u0027 name of multihost to be identical,\nrename log file of ttyS8 to \"obmc-console-host8.log\"\n\nTested:\nList log files under /var/volatile/log/: pass\n\nChange-Id: Ief7d091aef3ed12d4d08c54a56aa4289608ff5f9\nSigned-off-by: Delphine CC Chiu \u003cDelphine_CC_Chiu@wiwynn.com\u003e\n" }, { "commit": "05c30e1042d6f421285f9274e2c9fd81fc47987d", "tree": "b7efc9066e94d7ed02142d93dd521d64dc1e11eb", "parents": [ "9ed253e1cb0a6bff46201fa53e0b11d9f5dd42bb" ], "author": { "name": "Delphine CC Chiu", "email": "Delphine_CC_Chiu@wiwynn.com", "time": "Wed Mar 06 13:21:47 2024 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Wed Mar 06 13:35:43 2024 +0000" }, "message": "meta-facebook: yosemite4: Set GPIO status for slot reset button\n\nAlthough GPIO v0/v1/v2/v3 have been set as input in kernel devicetree,\nthese pins\u0027 direction still perform to output in bmc runtime.\n\nBefore resolving the unexpected behavior with Aspeed,\nThis change adds a short-term solution for GPIO pins setting to input,\nto ensure slot reset button being capable of pressing.\n\nTested:\nGet gpioinfo in bmc runtime\n\nChange-Id: Ibcc6e87bfa20c90471e1adbcd53018d8a29293ea\nSigned-off-by: Delphine CC Chiu \u003cDelphine_CC_Chiu@wiwynn.com\u003e\n" }, { "commit": "9ed253e1cb0a6bff46201fa53e0b11d9f5dd42bb", "tree": "f617b4cc14075a4018d9199efd297a4197c898d0", "parents": [ "7931db5afc2cab4036601909f15259bf962593d1" ], "author": { "name": "Delphine CC Chiu", "email": "Delphine_CC_Chiu@wiwynn.com", "time": "Wed Mar 06 09:33:15 2024 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Wed Mar 06 13:32:08 2024 +0000" }, "message": "meta-facebook: Config larger log size for obmc-console\n\nThe default log size is set as 16k and it is too small for yosemite4.\nIncrease log size to 256k.\n\nTested: Check if the log rotated at 256k - pass\n```\nroot@bmc:~# ls -l /var/log/\n-rw-rw-r-- 1 root utmp 292 Jan 24 23:41 lastlog\n-rw-r--r-- 1 root root 0 Jan 24 23:39 obmc-console-host1.log\n-rw-r--r-- 1 root root 0 Jan 24 23:39 obmc-console-host2.log\n-rw-r--r-- 1 root root 0 Jan 24 23:39 obmc-console-host3.log\n-rw-r--r-- 1 root root 0 Jan 24 23:39 obmc-console-host4.log\n-rw-r--r-- 1 root root 163851 Jan 25 00:08 obmc-console-host5.log\n-rw-r--r-- 1 root root 262144 Jan 25 00:06 obmc-console-host5.log.1\n-rw-r--r-- 1 root root 0 Jan 24 23:39 obmc-console-host6.log\n-rw-r--r-- 1 root root 0 Jan 24 23:39 obmc-console-host7.log\n-rw-r--r-- 1 root root 0 Jan 24 23:39 obmc-console8.log\ndrwx------ 2 root root 40 Dec 15 07:36 private\n-rw-r--r-- 1 root root 151253 Jan 25 00:08 redfish\n-rw-r--r-- 1 root root 122 Jan 25 00:08 state\n-rw-rw-r-- 1 root utmp 1152 Jan 24 23:41 wtmp\n```\n\nChange-Id: Id765ae87e84fd86539b835ca500ca2e8d6f8fb01\nSigned-off-by: Delphine CC Chiu \u003cDelphine_CC_Chiu@wiwynn.com\u003e\n" }, { "commit": "7fc39b2e676c7dc3cefcb3dff8801fa6b20e2c97", "tree": "f6f45b3bb653b64195bb817f623474a430f51fdc", "parents": [ "738f379d2fc8e51bbacdc07550dec798cb361a65" ], "author": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Tue Feb 27 20:49:45 2024 -0600" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Wed Feb 28 12:19:33 2024 +0000" }, "message": "meta-facebook: bletchley: switch the emmc mount to /mnt/emmc\n\nInternal code has switched over to handle both `/mnt/emmc` or as a\nfall-back `/mnt/data`. Move the eMMC mount location to `/mnt/emmc`\nand remove the extra symlinks.\n\nTested: Observed on QEMU the desired mounts.\n```\nroot@bletchley:~# mount | grep \"on /mnt\"\noverlay on /mnt/data type overlay (rw,relatime,lowerdir\u003d/mnt/data,upperdir\u003d/run/mnt-persist/mnt/data-data,workdir\u003d/run/mnt-persist/mnt/data-work,uuid\u003don)\n/dev/mmcblk0 on /mnt/emmc type btrfs (rw,relatime,compress\u003dzstd:3,ssd,discard,noacl,space_cache\u003dv2,subvolid\u003d5,subvol\u003d/)\n```\n\nSigned-off-by: Patrick Williams \u003cpatrick@stwcx.xyz\u003e\nChange-Id: I1bb20570d2296508247a3f1af63c1812801ea206\n" }, { "commit": "222c22b3e0899063bd41527c37b308040640cd82", "tree": "fed6ea5f2b03566cc52fcde632fcdfb26a5db6f7", "parents": [ "de59cd5f68c2fa00722b20e724b5bd39a39c50c1" ], "author": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Fri Feb 23 09:47:35 2024 -0600" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Tue Feb 27 22:14:10 2024 +0000" }, "message": "meta-facebook: set mutual-tls parsing to \u0027meta\u0027\n\nSigned-off-by: Patrick Williams \u003cpatrick@stwcx.xyz\u003e\nChange-Id: Id21ad6feb9ca81d59ffd3fe41c587bced7eac5cd\n" }, { "commit": "3a25b62245228ceac748a3be53345c7b3352b9d2", "tree": "be48e22ebc800d83a91108c95225c8230c4e9796", "parents": [ "4d6dbec4d80ca3c3351cf59aa0e1f3afe767b5b1" ], "author": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Tue Feb 27 09:31:55 2024 -0600" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Tue Feb 27 16:46:35 2024 +0000" }, "message": "meta-facebook: revamp phosphor-health-monitor config\n\n * Reformat with prettier.\n * Use `Memory_Available` instead of total memory.\n * Update path for RW volume for \"static-norootfs\" layout.\n * Add monitoring for `/tmp`.\n\nSigned-off-by: Patrick Williams \u003cpatrick@stwcx.xyz\u003e\nChange-Id: I1afc5e4b67ce22b73e3dd5e5046606ad43497ab2\n" }, { "commit": "4d6dbec4d80ca3c3351cf59aa0e1f3afe767b5b1", "tree": "b93271fea968f3869c689eb577bb80c1ea59ca11", "parents": [ "28cdd63dec805a84435547dfc6b8d7d9afd0864c" ], "author": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Fri Feb 23 19:45:50 2024 -0600" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Tue Feb 27 16:46:35 2024 +0000" }, "message": "meta-facebook: yosemite4: remove duplicate phosphor-health-monitor config\n\nSigned-off-by: Patrick Williams \u003cpatrick@stwcx.xyz\u003e\nChange-Id: I1c3e67983af809e79cf64b513ce085fc3fc53da6\n" }, { "commit": "63dea37d7c3d435da4cff1ba19faafc6a39f1114", "tree": "d3a8069e724f731e8ad13c7ff12456b7af633af1", "parents": [ "b178171b59b97b9d9bcdd454a0383a8531006eab" ], "author": { "name": "Andrew Geissler", "email": "openbmcbump-github@yahoo.com", "time": "Tue Feb 27 08:00:12 2024 -0600" }, "committer": { "name": "Andrew Geissler", "email": "openbmcbump-github@yahoo.com", "time": "Tue Feb 27 08:00:12 2024 -0600" }, "message": "fb-ipmi-oem: srcrev bump 483f00a5f4..7451903cdd\n\nPatrick Williams (1):\n OWNERS: update Amithash\u0027s email address\n\ncchoux (1):\n parse Unified SEL\n\nChange-Id: Ic22892f9d09677141442b582287381ceb3bfa625\nSigned-off-by: Andrew Geissler \u003copenbmcbump-github@yahoo.com\u003e\n" }, { "commit": "b75ace6b427ba1eb276e4ccd735c195490ac0baf", "tree": "e705b99b94f680a6ae16099369560dd5c9fe636a", "parents": [ "1d053ae218a0aa5818ed5cdfc6567c2ab52e05f2" ], "author": { "name": "Jagpal Singh Gill", "email": "paligill@gmail.com", "time": "Thu Feb 22 18:52:20 2024 -0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Fri Feb 23 22:30:37 2024 +0000" }, "message": "meta-facebook: update health metric config\n\nBased on the updated config schema for health metric, change the config\nfor Meta platforms. The storage metric exposes storage free rather than\nstorage used, hence update the thresholds for lower bound accordingly.\n\nRelated diff from phosphor-health-monitor -\n\nhttps://gerrit.openbmc.org/c/openbmc/phosphor-health-monitor/+/69592\n\nChange-Id: I6703f47ed5baecfaf457e9f4069a5b4b778a55dd\nSigned-off-by: Jagpal Singh Gill \u003cpaligill@gmail.com\u003e\n" }, { "commit": "cb5aa61fe6dc534cf4cd0902fae3d67d80dbd39e", "tree": "94af6d44a21a5af249efda704edfccd7debbe7dd", "parents": [ "171b31dc31c34437cbbd3a1777c2ef0c033d27c6" ], "author": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Thu Feb 15 14:43:41 2024 -0600" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Tue Feb 20 23:06:59 2024 +0000" }, "message": "meta-facebook: remove set-bmc-time-from-host\n\nThis code might work on systems with IPMI but isn\u0027t necessary since\nthe BMC should have a hardware RTC of its own on recent systems.\n\nSigned-off-by: Patrick Williams \u003cpatrick@stwcx.xyz\u003e\nChange-Id: Ib7e0149ed9a1e64f9f7a13c36a4bfb9a9d496db3\n" }, { "commit": "171b31dc31c34437cbbd3a1777c2ef0c033d27c6", "tree": "f773e51f36a75d03f2b2a0c9bfb41fd9eb6a12f3", "parents": [ "55a026cb967283190204d98e7cad53085c18aaef" ], "author": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Tue Feb 20 16:17:40 2024 -0600" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Tue Feb 20 23:06:59 2024 +0000" }, "message": "meta-facebook: yosemite4: add BMC compatible string\n\nSigned-off-by: Patrick Williams \u003cpatrick@stwcx.xyz\u003e\nChange-Id: I9a3f48392b59a230351be6b857fcc0c1314a35a4\n" }, { "commit": "f575142f1a7ce93101b005366a98c22b30ddf49e", "tree": "bc352ada9e686569a38689c9136f02870e2d40b4", "parents": [ "c555b591477911d71dde72347a6721f38587285a" ], "author": { "name": "Peter Yin", "email": "peter.yin@quantatw.com", "time": "Wed Jan 10 16:53:45 2024 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Mon Feb 19 15:07:04 2024 +0000" }, "message": "meta-facebook: harma: Add Host BMC to SITV bmc uart\n\nAdd ttyUSB1 to login SITV BMC for debugging.\nHost BMC USB -\u003e FT4232 -\u003e SITV UART2\n\nChange-Id: I8f54a87fc2bc344b5e975c3c201932d219f6a299\nSigned-off-by: Peter Yin \u003cpeter.yin@quantatw.com\u003e\n" }, { "commit": "743fe2b132aea9581cc7113b120d6328415cb4c2", "tree": "ff94270cac8e16ac12c00f7de503c198fc1d58c2", "parents": [ "ab717d446c171357e8c9946a7e126076c6602e41" ], "author": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Sat Feb 17 15:34:13 2024 -0600" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Sat Feb 17 15:37:00 2024 -0600" }, "message": "meta-facebook: add /mnt/data to most systems\n\nSigned-off-by: Patrick Williams \u003cpatrick@stwcx.xyz\u003e\nChange-Id: I8154fdd6f01854529e13247628b3819327cd9470\n" }, { "commit": "1f197f6cc4e779ee22706c15e0186f850bae22b1", "tree": "b511e5cb93a596911c673e3c83b0c2aec6c382b6", "parents": [ "b30739efb76153d435a50413d07983848f3f95ca" ], "author": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Wed Feb 14 08:14:23 2024 -0600" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Wed Feb 14 16:18:11 2024 +0000" }, "message": "meta-facebook: bmcweb: enable logging at warning level\n\nWe are seeing some crashes in bmcweb on startup with little information\nas to why. Enable warning-level logging to hopefully give some insight.\nInfo level appears to likely be too chatty.\n\nSigned-off-by: Patrick Williams \u003cpatrick@stwcx.xyz\u003e\nChange-Id: I37f2834b09c5344f168e29f06199bbe051ebfd39\n" }, { "commit": "3dc16fb763eba1d36816856300dcc292fbad52d6", "tree": "7823aa2b25e23359584e2f9dbe60c89088f8d23e", "parents": [ "9a8650a4818d3305b1e0ee87cc80b8bbc2895b05" ], "author": { "name": "Gunnar Mills", "email": "gmills@us.ibm.com", "time": "Mon Feb 12 13:39:28 2024 -0600" }, "committer": { "name": "Gunnar Mills", "email": "gmills@us.ibm.com", "time": "Mon Feb 12 13:40:50 2024 -0600" }, "message": "meta-facebook: bmcweb: remove enabled new power-thermal\n\nhttps://gerrit.openbmc.org/c/openbmc/bmcweb/+/69228 enabled\nredfish-new-powersubsystem-thermalsubsystem by default remove it here in\nthe bbappend to keep things cleaner.\n\nTested: I tested having this line removed in the meta-ibm bbappend when\ntesting 69228.\n\nChange-Id: I4b5f0c4f4ac98116344e98bb48a032c1d4f32b25\nSigned-off-by: Gunnar Mills \u003cgmills@us.ibm.com\u003e\n" }, { "commit": "99837d21fc395cb916c43236c74bbdf3b1f81a70", "tree": "07e8a0eedc5e3854a4ddb5c6ddb485d0f9a4c917", "parents": [ "cfecb2789da6414be4725fb1c4ad7ca5951c5857" ], "author": { "name": "Matt Simmering", "email": "matthew.simmering@intel.com", "time": "Thu Nov 30 14:37:32 2023 -0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Fri Feb 09 14:11:46 2024 +0000" }, "message": "Update RestrictionMode defaults to match PDI\n\nIn phosphor-dbus-interfaces the terminology used for RestrictionMode is getting updated. This change is to keep in sync.\n\nChange-Id: Idd41d8bfa838aadb81c11f9cee9fe74e3c28673c\nSigned-off-by: Matt Simmering \u003cmatthew.simmering@intel.com\u003e\n" }, { "commit": "a2fb20c313583d45f9caa03a3b1cb210de0f03a1", "tree": "21a46ac4730f40c6ec0615815793b24ed4631634", "parents": [ "0ce8d87a84c2f1348cf23d051e7617349a076cb1" ], "author": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Mon Feb 05 14:11:29 2024 -0600" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Mon Feb 05 16:10:45 2024 -0600" }, "message": "meta-facebook: remove excess override syntaxes\n\nWhen a bbappend file is already in a meta-machine layer, there is no\nreason for extra \":machine\" override syntax usage. Remove them all.\n\nSigned-off-by: Patrick Williams \u003cpatrick@stwcx.xyz\u003e\nChange-Id: I610e72633adb5bc36b63fe2b727e394c61070185\n" }, { "commit": "0ce8d87a84c2f1348cf23d051e7617349a076cb1", "tree": "bfac43c85c245d14846ed8a7cf5206a2dabe35fb", "parents": [ "a3ae067e4ec83460ba9d6f5bd6fb561f6857a61f" ], "author": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Mon Feb 05 14:03:31 2024 -0600" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Mon Feb 05 16:10:45 2024 -0600" }, "message": "meta-facebook: minerva: simplify obmc-console bbappend\n\nThe bbappend was needlessly overwriting variables already defined by\nthe base layer.\n\nSigned-off-by: Patrick Williams \u003cpatrick@stwcx.xyz\u003e\nChange-Id: Iff3c717aabdb766b4365789d42c0544eaa7b6f3c\n" }, { "commit": "a3ae067e4ec83460ba9d6f5bd6fb561f6857a61f", "tree": "8e187c8d1707b03b2805833f71fccf83a3c4c182", "parents": [ "7c3ee7b7a58d4a3b5b19b9d765ab8f76d78db234" ], "author": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Mon Feb 05 13:54:46 2024 -0600" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Mon Feb 05 16:10:45 2024 -0600" }, "message": "meta-facebook: switch dropbear to openssh\n\nSigned-off-by: Patrick Williams \u003cpatrick@stwcx.xyz\u003e\nChange-Id: Ib83558277ed4600caa379f9d9fdfcaf674a5f1ae\n" }, { "commit": "7c3ee7b7a58d4a3b5b19b9d765ab8f76d78db234", "tree": "bf74813a37be660dac3d65318f9a5a4dbbcdb5b0", "parents": [ "07e91c780611f8ea84fc36160dd9da5f8b4242c3" ], "author": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Sat Feb 03 16:52:58 2024 -0600" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Mon Feb 05 16:10:45 2024 -0600" }, "message": "meta-facebook: simplify obmc-console config\n\nWe not longer plan to support the SSH console ports for obmc-console on\nour servers and want to use OpenSSH. A lot of the obmc-console bbappend\ncan therefore be simplified (and we don\u0027t even need a distinction\nbetween multi-host and single-host).\n\nSigned-off-by: Patrick Williams \u003cpatrick@stwcx.xyz\u003e\nChange-Id: I86269eb1fcb45a8e43271204bd303e50a8dcbaf1\n" }, { "commit": "07e91c780611f8ea84fc36160dd9da5f8b4242c3", "tree": "646d35494ea576c01aeab6089c5aa430016d64a2", "parents": [ "135c968493f0986e0cca594e67a18edab3570a62" ], "author": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Mon Feb 05 11:11:42 2024 -0600" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Mon Feb 05 22:08:28 2024 +0000" }, "message": "meta-phosphor: phosphor-state-manager: add host-shutdown to host-stop link\n\nSome systems have separate voltage domains between the chassis and\nthe host, so they disable the host-shutdown to chassis-poweroff\ndependency. As a side-effect, the host never stops as part of the\nhost-shutdown. (The current default dependency is host-shutdown -\u003e\nchassis-poweroff -\u003e power-stop -\u003e host-stop ). Adding an additional\ndependency from host-shutdown directly to host-stop, so that the\nhost is stopped when shutdown.\n\nSigned-off-by: Patrick Williams \u003cpatrick@stwcx.xyz\u003e\nChange-Id: I7141dbe4ec4590158cc25147a9b387bc562ed957\n" }, { "commit": "135c968493f0986e0cca594e67a18edab3570a62", "tree": "da9b09169a8e13c55e1be13a69d278053270f3fd", "parents": [ "cde8c4ee1cca1a064b84f201706abe47639623a0" ], "author": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Mon Feb 05 08:48:18 2024 -0600" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Mon Feb 05 22:08:28 2024 +0000" }, "message": "meta-facebook: yosemite4: remove unnecessary host-start to chassis-poweron link\n\nNow that OBMC_POWER_INSTANCES is eliminated, we get the correct target\nlinks created between host-startmin and chassis-poweron. This extra\nlink is not necessary.\n\nSigned-off-by: Patrick Williams \u003cpatrick@stwcx.xyz\u003e\nChange-Id: Ida433ee178f3ef05fef2312d8fa6e9c2a5744dbd\n" }, { "commit": "d584a5a8411eed98098bdb99290e9d2137bfacfa", "tree": "448ddec68ab052a3d2132f24f94efffdb4fcdfa4", "parents": [ "4d8c12da34bd3afd4a77793b72b943621e5edb36" ], "author": { "name": "Peter Yin", "email": "peter.yin@quantatw.com", "time": "Wed Jan 10 16:55:12 2024 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Mon Feb 05 14:13:48 2024 +0000" }, "message": "meta-facebook: harma: add getty in ttyS3\n\nThis function allows CMM to log in to the host BMC for debugging.\n\nPath:\nCMM UART6 Host -\u003e Harma Uart6 getty -\u003e SITV Uart2 getty\n\nChange-Id: I2137b2fd3d7dd18b500effc7c1f5e765498fadb0\nSigned-off-by: Peter Yin \u003cpeter.yin@quantatw.com\u003e\n" }, { "commit": "6310a9ed2a30e62765b240ecaacb8a7ec5c557d4", "tree": "eb05bf4b2e1bce3e8fddf75dd9f6ce4fcaf6a464", "parents": [ "704c42c1a2f3b956c4c470bf75d68b6570a248c2" ], "author": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Thu Feb 01 17:38:51 2024 -0600" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Fri Feb 02 15:15:23 2024 +0000" }, "message": "meta-facebook: yosemite4: fix power sequence operations\n\nThere were a few issues in the phosphor-state-manager relationships\nthat prevented the Host and Chassis dbus objects from reflecting\nreality. Adjust them accordingly.\n\nSigned-off-by: Patrick Williams \u003cpatrick@stwcx.xyz\u003e\nChange-Id: I3bac67d447d0e99fbe1b0f32ee04c1e5a12b8d98\n" }, { "commit": "704c42c1a2f3b956c4c470bf75d68b6570a248c2", "tree": "a08f29d07f86d679d768c505d36e4a22eedeebf4", "parents": [ "f87122a95981250ebb3865ff6b9e36fbc1af7ff6" ], "author": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Thu Feb 01 16:56:35 2024 -0600" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Fri Feb 02 15:15:23 2024 +0000" }, "message": "meta-facebook: systemd-networkd: wait for one\n\nMany systems have multiple network interfaces, some of which are\nUSB network interfaces. We should only wait for a single non-USB\ninterface to come online in order to consider the `network.target`\nas online. Add a configuration for `systemd-networkd-wait-online`\nso that any `ethN` interface coming up is all that is necessary.\n\nSigned-off-by: Patrick Williams \u003cpatrick@stwcx.xyz\u003e\nChange-Id: I4e5bad889be5a5b9deb537ac5f5df1da33882fad\n" }, { "commit": "f87122a95981250ebb3865ff6b9e36fbc1af7ff6", "tree": "76c9cd4af65a15c4069896fd9be572e320ea7e76", "parents": [ "0ab4ab6a7894e74291a99393c847531b9a5fbc41" ], "author": { "name": "Delphine CC Chiu", "email": "Delphine_CC_Chiu@wiwynn.com", "time": "Fri Feb 02 13:48:45 2024 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Fri Feb 02 15:13:07 2024 +0000" }, "message": "meta-facebook: yosemite4: set default PWM to 100 persent\n\nDescription:\nAccording to the thermal baseline test results of T1M config with\nFloating Falls config at 35C, 6000ft, the minimum fan duty will\nlocate at 95%.\n\nSet the system fan duty as constant at 100% for all EVT build to\nprevent the thermal risk.\n\nTest Case:\n1. Check all the PWMs are 100%. - pass\n\nChange-Id: I561745865f3f0875156004866dd6f46b88906d58\nSigned-off-by: Delphine CC Chiu \u003cDelphine_CC_Chiu@wiwynn.com\u003e\n" }, { "commit": "376c57bd5e1eebe152013aa82ce0a04896f2022b", "tree": "aee88718eefc4c218f44417bf4da7c3e6e73f426", "parents": [ "283de3fc1caf4c9738d5e121d0ca73fb0160b9f7" ], "author": { "name": "Yang Chen", "email": "yang.chen@quantatw.com", "time": "Tue Jan 30 16:03:32 2024 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Tue Jan 30 17:28:28 2024 +0000" }, "message": "meta-facebook: minerva: enable sel-logger for sensor\n\nEnable logger for sensor threshold event monitor.\n\nChange-Id: I589bcc6aa1e046ad53971e99460a38deb39d66e6\nSigned-off-by: Yang Chen \u003cyang.chen@quantatw.com\u003e\n" }, { "commit": "c749ece2826b496f037f4b900d6c5193b1aa9a72", "tree": "40d05880232e3148aa97d0de7ef8c926c938da42", "parents": [ "6691088c23196ccfd0d6c6872e69a6f81ba1bf92" ], "author": { "name": "Peter Yin", "email": "peter.yin@quantatw.com", "time": "Fri Jan 26 23:30:36 2024 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Tue Jan 30 15:05:15 2024 +0000" }, "message": "meta-facebook: network: fix network type\n\nType\u003dether will match all interface, it will impact some static device.\nexample: usb0\n\nuse Driver\u003dftgmac100 to set bmc ethernet interface.\n\nChange-Id: I9ef33619595055d990d5a356b02e5fbfcfe559a8\nSigned-off-by: Peter Yin \u003cpeter.yin@quantatw.com\u003e\n" }, { "commit": "5de6da07e075e1c2294ecda8843cc773d33416b6", "tree": "db502c229155f1837461195a5564085c18399eaa", "parents": [ "b107c23e984f25b390b0791299dd92635d89a3bf" ], "author": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Fri Jan 26 12:45:17 2024 -0600" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Fri Jan 26 12:45:25 2024 -0600" }, "message": "meta-facebook: OWNERS: update Amithash\u0027s email address\n\nSigned-off-by: Patrick Williams \u003cpatrick@stwcx.xyz\u003e\nChange-Id: I278c0c50ccf69448143364d3ac41eb52b7352b00\n" }, { "commit": "b107c23e984f25b390b0791299dd92635d89a3bf", "tree": "59a1fca84247ec1ad6141ad22b85fd1fe931c8c5", "parents": [ "b7b564fcdc28fde4ff616d5576e2769ce99f0595" ], "author": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Fri Jan 26 11:58:47 2024 -0600" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Fri Jan 26 18:43:10 2024 +0000" }, "message": "meta-facebook: jq: add to image\n\njq is a useful debug tool for looking at json output. Add it to our\nbase image set.\n\nSigned-off-by: Patrick Williams \u003cpatrick@stwcx.xyz\u003e\nChange-Id: Ie63dc8f9a87042ca803dc5117d967a2730fb7aa2\n" }, { "commit": "61406e477e345f14c6153ac55e8195ca39111f5b", "tree": "7eddcc8a29323d40d1d6985d0d8ba418293966b7", "parents": [ "a24caf9010b502b218b2e83d3b43db9a839a90d0" ], "author": { "name": "Peter Yin", "email": "peter.yin@quantatw.com", "time": "Wed Jan 10 16:50:33 2024 +0800" }, "committer": { "name": "peter.yin", "email": "peter.yin@quantatw.com", "time": "Fri Jan 26 15:27:11 2024 +0000" }, "message": "meta-facebook: harma: add blacklist\n\nWe found that in some buses, due to power sequence issues, there is an I2C lock, resulting in a discover service timeout. Add blacklist to avoid i2c lock.\n\nChange-Id: I216d051ae6c56d7864d70215e7a11fedab05a952\nSigned-off-by: Peter Yin \u003cpeter.yin@quantatw.com\u003e\n" }, { "commit": "34247ac9d662f02d39c8d1fbb24dc0ba80cdc0fd", "tree": "fde9e3fb84f29d567bf7845ad6bafa65ef85df1f", "parents": [ "339940db155e80766bf649d93d011a03766473ba" ], "author": { "name": "Amithash Prasasd", "email": "amithash@meta.com", "time": "Tue Jan 16 16:13:48 2024 -0800" }, "committer": { "name": "Amithash Prasad", "email": "amithash@meta.com", "time": "Thu Jan 25 03:18:00 2024 +0000" }, "message": "meta-facebook: rsyslog: Allow reading server console logs\n\nGenerate host server log files to load logs from obmc-console.\nThis allows us to input /var/log/obmc-console*.log and\npotentially be able to stream it to an external syslog\nserver (if configured to do so).\n\nChange-Id: I8146f499a47971501b3abe85e6d8026216d3d0b4\nSigned-off-by: Amithash Prasasd \u003camithash@meta.com\u003e\n" }, { "commit": "e7757df2f3cf06a22fb7252a15f328ef368bd707", "tree": "f76618d49ebf56f2a157051739ccf76af58f0f7d", "parents": [ "ad06f332cdcee394a86ad21871d7c1e887046296" ], "author": { "name": "Amithash Prasasd", "email": "amithash@meta.com", "time": "Fri Jan 19 15:41:34 2024 -0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Wed Jan 24 19:38:13 2024 +0000" }, "message": "meta-facebook: obmc-console: match console-id to OBMC_HOST_INSTANCES\n\nEnsure that we are using host numbering as specified in\nOBMC_HOST_INSTANCES so that there is consistency across\nother interfaces (Power control/Etc) where single-host\nuses host0 and multi-host systems use host1-hostN.\n\nThis change also renames /var/log/obmc-console0.log to\n/var/log/obmc-console-host0.log to make it more explicit.\n\nChange-Id: I5e189a7d49075d91b8292ed2fdfddf7decaf641e\nSigned-off-by: Amithash Prasasd \u003camithash@meta.com\u003e\n" }, { "commit": "ad06f332cdcee394a86ad21871d7c1e887046296", "tree": "309ef79b7cca81ecaddb47edb691390d6abe07ce", "parents": [ "a396c57aeda90eebbb75a3acc9d0248040be3d1f" ], "author": { "name": "Peter Yin", "email": "peter.yin@quantatw.com", "time": "Thu Jan 18 17:39:19 2024 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Wed Jan 24 12:40:27 2024 +0000" }, "message": "meta-facebook: harma: fix bios spi path\n\nBios SPI path has been changed from spi1.0 to spi3.0 due to the addition of gpio_spi.\n\nroot@harma:~# ls /sys/bus/spi/devices/ -al\ndrwxr-xr-x 2 root root 0 Dec 31 1969 .\ndrwxr-xr-x 4 root root 0 Dec 31 1969 ..\nlrwxrwxrwx 1 root root 0 Dec 31 1969 spi1.0 -\u003e ../../../devices/platform/spi-gpio/spi_master/spi1/spi1.0\nlrwxrwxrwx 1 root root 0 Dec 31 1969 spi2.0 -\u003e ../../../devices/platform/ahb/1e620000.spi/spi_master/spi2/spi2.0\nlrwxrwxrwx 1 root root 0 Dec 31 1969 spi2.1 -\u003e ../../../devices/platform/ahb/1e620000.spi/spi_master/spi2/spi2.1\nlrwxrwxrwx 1 root root 0 Dec 31 1969 spi3.0 -\u003e ../../../devices/platform/ahb/1e631000.spi/spi_master/spi3/spi3.0\n\nChange-Id: I1ccb6f3dff555a7f1267d0f583fc733853129814\nSigned-off-by: Peter Yin \u003cpeter.yin@quantatw.com\u003e\n" }, { "commit": "1ada3c2d58691868267415a1ea08dab4a7f54aef", "tree": "50354c5704c97d5ba80d8d793e22444ea4bd0d9c", "parents": [ "32e027073bc2b7e4a4c9604c7ac36605dd91de80" ], "author": { "name": "Yang Chen", "email": "yang.chen@quantatw.com", "time": "Tue Jan 23 21:03:29 2024 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Tue Jan 23 16:49:44 2024 +0000" }, "message": "meta-facebook: minerva: remove CPU_CRIT_TGT in health monitor config\n\nOur SIT team reported an issue that SSH will disconnect by the remote host when doing the stress by the script (while 1 to reading firmware version) on multiple terminals. After we reproduced on our side, we found that CPU usage will be over 90 % during stress and then cause BMC to reboot by health monitor. We remove reboot.target in CPU_CRIT_TGT from CPU critical threshold to avoid this issue.\n\nChange-Id: Ifd0ca2b13b3ae1474503cf646b7b2c8c52af6ca9\nSigned-off-by: Yang Chen \u003cyang.chen@quantatw.com\u003e\n" }, { "commit": "aa465987b931c0e165a8a507b2767ce4534e4bdc", "tree": "77920a484e48e5ce36168204e73604208bc4e5dc", "parents": [ "6d258ac7022740e2a8dfd3624c7fb4c5e234148a" ], "author": { "name": "Andrew Geissler", "email": "openbmcbump-github@yahoo.com", "time": "Fri Jan 19 14:40:07 2024 -0600" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Mon Jan 22 19:36:59 2024 +0000" }, "message": "fb-ipmi-oem: srcrev bump 75d597f55a..483f00a5f4\n\nPatrick Williams (2):\n sdbusplus: avoid deprecated phosphor::Timer\n meson: adjust nlohmann-json dependency\n\nChange-Id: I0ef7f66c29890b778be51746b71b86ea9aeb7905\nSigned-off-by: Andrew Geissler \u003copenbmcbump-github@yahoo.com\u003e\n" }, { "commit": "5f9e126d9df95efaf8f35693b74643f08155e15e", "tree": "19cedccd70cf6a9ddc59aa516037286d78cd1a45", "parents": [ "b9de456f872f11d38f4ce822d0903a350cc8003c" ], "author": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Fri Jan 19 20:24:38 2024 -0600" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Mon Jan 22 15:54:52 2024 +0000" }, "message": "meta-facebook: network: set eui64 LL address mode\n\nSigned-off-by: Patrick Williams \u003cpatrick@stwcx.xyz\u003e\nChange-Id: I2b43f44428439c6425a4486c9535c8a8410bc5f7\n" }, { "commit": "d3135247287cb3a4b932a89c088c9011b4a19a56", "tree": "a5ba56efb8937c02e7bdeed354c42015e0a147ee", "parents": [ "cf77973df7b3fdce9ec381c4599ef2a12873e6ce" ], "author": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Fri Jan 19 16:45:58 2024 -0600" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Fri Jan 19 16:46:02 2024 -0600" }, "message": "meta-facebook: reduce permissions on scripts\n\nScripts should be installed with 0755 permissions and not 0777,\notherwise non-root users can potentially modify or delete them.\n\nSigned-off-by: Patrick Williams \u003cpatrick@stwcx.xyz\u003e\nChange-Id: I41270a2bb3fb940d8ca49ed6230545d98efb2fea\n" }, { "commit": "afa6888d65283a5f3366e280d87dd9976d47261f", "tree": "58ea7efd21b2fb95a30f137499564fdc450825dd", "parents": [ "614d06d2e492340bcc8942eac280c5fb3c71a107" ], "author": { "name": "Andrew Geissler", "email": "openbmcbump-github@yahoo.com", "time": "Thu Jan 18 10:40:13 2024 -0600" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Fri Jan 19 15:13:30 2024 +0000" }, "message": "fb-ipmi-oem: srcrev bump 5a7a04da0b..75d597f55a\n\nYang Chen (1):\n configs: add configs for Minerva system\n\nChange-Id: I7980fd8ef7d3bcac3a9b5cd57e08ad7c35dc258a\nSigned-off-by: Andrew Geissler \u003copenbmcbump-github@yahoo.com\u003e\n" }, { "commit": "3489f56cd549120b1508d0105629890463e18318", "tree": "6f6c59b550c755098fa309846941831a06517f26", "parents": [ "aaa738530c395bb050994301074d591c6eb97f4a" ], "author": { "name": "Delphine CC Chiu", "email": "Delphine_CC_Chiu@wiwynn.com", "time": "Tue Jan 16 14:31:37 2024 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Thu Jan 18 21:16:25 2024 +0000" }, "message": "meta-facebook: yosemite4: Add network config\n\nAdd network config and move 00-bmc-eth.network into meta-facebook common layer.\n\nTest on yv4:\nAfter do sled cycle can get ip success.\n\nSigned-off-by: Delphine CC Chiu \u003cDelphine_CC_Chiu@wiwynn.com\u003e\nChange-Id: I7b6452d5f4a25fa898ae512bcc745b8ae9ed640e\n" }, { "commit": "aaa738530c395bb050994301074d591c6eb97f4a", "tree": "ccb29d5609e6bb6a82ed1bee4abd52af08d3b8fa", "parents": [ "f528fa431e650c1084b2faeae5e6abce97a051b0" ], "author": { "name": "Potin Lai", "email": "potin.lai@quantatw.com", "time": "Tue Jan 09 19:43:37 2024 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Thu Jan 18 20:18:51 2024 +0000" }, "message": "meta-facebook: fix ipv6-ll address\n\nThe correct MAC address of NCSI managerd ethernet interface is obtained\nduring NCSI config process. It will need run extra workaround to\nregenerated IPv6-LL address based on new MAC address from NCSI.\n\nAdd service for checking the MAC address is correctly get from NIC card\nvia NCSI, then regenerate the IPv6-LL address.\n\nTested on Harma:\n```\nroot@harma:~# ifconfig eth0\neth0 Link encap:Ethernet HWaddr 10:70:FD:E4:3F:63\n inet addr:10.10.12.110 Bcast:10.10.255.255 Mask:255.255.0.0\n inet6 addr: fe80::1270:fdff:fee4:3f63/64 Scope:Link\n inet6 addr: 2018:5::e52e/128 Scope:Global\n inet6 addr: 2019:7::1270:fdff:fee4:3f63/64 Scope:Global\n UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1\n RX packets:97642 errors:0 dropped:539 overruns:0 frame:0\n TX packets:1625 errors:0 dropped:0 overruns:0 carrier:0\n collisions:0 txqueuelen:1000\n RX bytes:15804387 (15.0 MiB) TX bytes:140035 (136.7 KiB)\n Interrupt:42\nroot@harma:~# systemctl status network-wait-ipv6-ll@eth0.service\n* network-wait-ipv6-ll@eth0.service - Wait IPv6 link-local initialization\n Loaded: loaded (/usr/lib/systemd/system/network-wait-ipv6-ll@.service; static)\n Active: active (exited) since Tue 2024-01-09 03:33:43 PST; 38s ago\n Process: 271 ExecStart\u003d/usr/libexec/check-ipv6-ll eth0 (code\u003dexited, status\u003d0/SUCCESS)\n Main PID: 271 (code\u003dexited, status\u003d0/SUCCESS)\n CPU: 148ms\n\nJan 09 03:33:41 harma systemd[1]: Starting Wait IPv6 link-local initialization...\nJan 09 03:33:41 harma check-ipv6-ll[271]: non-global mac address, start fix eth0 ipv6-ll\nJan 09 03:33:43 harma check-ipv6-ll[271]: eth0 mac: 10:70:fd:e4:3f:63\nJan 09 03:33:43 harma check-ipv6-ll[271]: expected ipv6-ll: fe80::1270:fdff:fee4:3f63\nJan 09 03:33:43 harma systemd[1]: Finished Wait IPv6 link-local initialization.\n```\n\nSigned-off-by: Potin Lai \u003cpotin.lai@quantatw.com\u003e\nChange-Id: Id3c40beda9f290d36565f0e8e146be772c9a9983\n" }, { "commit": "f26f2883a23706ef133ccf07f71893459be256cb", "tree": "85624fe04a88db78f16b726ddd8d74803146aa15", "parents": [ "826653f948551a40ff7a552f932d139386443462" ], "author": { "name": "Yang Chen", "email": "yang.chen@quantatw.com", "time": "Mon Jan 15 20:39:42 2024 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Thu Jan 18 16:34:53 2024 +0000" }, "message": "meta-facebook: minerva: let the system initial service first\n\nminerva-sys-init service should be executed before the service of the gpio-monitor or it will cause the gpioget to fail.\n\nChange-Id: I8302ffd9d21f4c064435377cff43df7f75e3d36a\nSigned-off-by: Yang Chen \u003cyang.chen@quantatw.com\u003e\n" }, { "commit": "826653f948551a40ff7a552f932d139386443462", "tree": "2fbe54356f9d8ebcbf3a3109aafd946bdb44f843", "parents": [ "26afa78eaaac2bd5fc38124096d740ca1a2d686d" ], "author": { "name": "Yang Chen", "email": "yang.chen@quantatw.com", "time": "Mon Jan 15 20:48:54 2024 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Thu Jan 18 16:34:22 2024 +0000" }, "message": "meta-facebook: minerva: gpio-monitor: remove incorrect suffix\n\nRemove incorrect file suffixes in the service file\n\nChange-Id: Ieaaf686b3b15836b81c9cf1e31fffda2c63f7e48\nSigned-off-by: Yang Chen \u003cyang.chen@quantatw.com\u003e\n" }, { "commit": "26afa78eaaac2bd5fc38124096d740ca1a2d686d", "tree": "8baf004f28d3405e2cca1cc77d44616ef7da7cd4", "parents": [ "5be2c42d8c6dce166f3b8e09fcd9b3dc027fa883" ], "author": { "name": "Yang Chen", "email": "yang.chen@quantatw.com", "time": "Tue Jan 16 16:11:18 2024 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Thu Jan 18 16:33:45 2024 +0000" }, "message": "meta-facebook: minerva: enable OCP debug card support\n\nSupport OCP debug card use in the Minerva system.\n\nChange-Id: I9436f8556556f1dd2a4ef8cbccb712bbfdf9564c\nSigned-off-by: Yang Chen \u003cyang.chen@quantatw.com\u003e\n" }, { "commit": "5be2c42d8c6dce166f3b8e09fcd9b3dc027fa883", "tree": "4866afdf4e2371e337803b213dbe5713dcaab5e3", "parents": [ "ee5d7dd7d2c4352b84533d010678bab53bafb56d" ], "author": { "name": "Delphine CC Chiu", "email": "Delphine_CC_Chiu@wiwynn.com", "time": "Tue Jan 16 13:26:21 2024 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Thu Jan 18 16:27:53 2024 +0000" }, "message": "meta-facebook: yosemite4: Enable I3C drivers\n\nEnable I3C drivers kernel configuration for yosemite4.\nThe i3cdev driver is enabled for debug purpose and it will be removed\nwhen mctp-i3c is ready.\n\nTested:\nCheck I3C hub devices path were created.\n\nroot@bmc:~# ls /sys/bus/i3c/devices/\n0-4cd8c469904 1-4cd5e46991c i3c-0 i3c-1\n\nChange-Id: I9931ce1f18fc46b34f4fe4d9329fbd4d6e91ab1b\nSigned-off-by: Delphine CC Chiu \u003cDelphine_CC_Chiu@wiwynn.com\u003e\n" }, { "commit": "ee5d7dd7d2c4352b84533d010678bab53bafb56d", "tree": "d51592cc2bda9959971a863aa2d3956d63939fb7", "parents": [ "2f5f0cb67e8e77828b2eea756f22e61a4f2af518" ], "author": { "name": "Peter Yin", "email": "peter.yin@quantatw.com", "time": "Tue Jan 09 13:54:11 2024 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Thu Jan 18 16:05:10 2024 +0000" }, "message": "meta-facebook: harma: fix PSM power control error event\n\n1. To fix the logical failure in the check status script.\n2. Remove obmc-host-stop@0.target and phosphor-reboot-host@0.service\nto avoid a host cycle when resetting.\n3. To fix power policy.\n\nChange-Id: I9de75bff428692c33ec4bf2e053eabb9aeba6f4d\nSigned-off-by: Peter Yin \u003cpeter.yin@quantatw.com\u003e\n" }, { "commit": "2f5f0cb67e8e77828b2eea756f22e61a4f2af518", "tree": "f15384df9de82dbcf2cd4c59bc0506952865cf91", "parents": [ "2232995c3b381906b7cc505d51a49b09fba92cd0" ], "author": { "name": "Peter Yin", "email": "peter.yin@quantatw.com", "time": "Tue Jan 09 13:52:48 2024 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Thu Jan 18 16:05:05 2024 +0000" }, "message": "meta-facebook: harma: add power led control\n\nControl the host power LED when turning on/off.\n\nRunning: set led on\nOff: set led off\n\nChange-Id: Icd7a05ece4f9928c20e70b5a52ec06a8e2495ab6\nSigned-off-by: Peter Yin \u003cpeter.yin@quantatw.com\u003e\n" }, { "commit": "f079ad7e47d674943dc841bd3f5a81887b2ad092", "tree": "74443af0cf1336e594f74c6cb7606db55a9cd0f3", "parents": [ "dd3f94e041cf266b6199eaf44c4dfe8837d8ff05" ], "author": { "name": "Amithash Prasasd", "email": "amithash@meta.com", "time": "Tue Jan 16 15:57:21 2024 -0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Wed Jan 17 10:49:36 2024 +0000" }, "message": "meta-facebook: rsyslog: Use FQDN for hostname\n\nas title, allows logs from different subdomains to be distinct.\n\nChange-Id: I934d4f3e943c17dc4bc3ca9fd9f427f0529829cf\nSigned-off-by: Amithash Prasasd \u003camithash@meta.com\u003e\n" }, { "commit": "ad3455d69e100ba61b43c715039b793ce936527b", "tree": "9ed9b62e1b3ab2868098d86a694a8962c24a791b", "parents": [ "2f1f94c46259dbc9a085a1640a10663a6b159a39" ], "author": { "name": "Andrew Geissler", "email": "openbmcbump-github@yahoo.com", "time": "Wed Jan 10 20:50:07 2024 -0600" }, "committer": { "name": "Andrew Geissler", "email": "geissonator@yahoo.com", "time": "Fri Jan 12 15:42:04 2024 +0000" }, "message": "fb-ipmi-oem: srcrev bump 8fe3a44723..5a7a04da0b\n\nPotin Lai (2):\n configs: add configs for Harma system\n storagecommands: fix sensorTree never updated\n\nChange-Id: I9e619a3445cd64ba3e37c7754d4d857e564d3840\nSigned-off-by: Andrew Geissler \u003copenbmcbump-github@yahoo.com\u003e\n" }, { "commit": "2f1f94c46259dbc9a085a1640a10663a6b159a39", "tree": "31f21ea47fb78a1cd392a6d2d8007844f76e7318", "parents": [ "67ab205ecdc015bb8d70ca768deca750d1f3115a" ], "author": { "name": "Delphine CC Chiu", "email": "Delphine_CC_Chiu@wiwynn.com", "time": "Fri Jan 12 17:22:20 2024 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Fri Jan 12 15:35:02 2024 +0000" }, "message": "meta-facebook: yosemite4: Support power policy after doing slot hot-plug\n\nAdd systemd service slot-hot-plug to recover host status by power policy\n\nTested:\nplug out then in slot, check host status and journal\n\nChange-Id: I8168b32a40c34d787fbfdd6c6a0c944ace919514\nSigned-off-by: Delphine CC Chiu \u003cDelphine_CC_Chiu@wiwynn.com\u003e\n" }, { "commit": "67ab205ecdc015bb8d70ca768deca750d1f3115a", "tree": "4e8a4d1c3664de6b01c4e96594e5daf110ddaec7", "parents": [ "4f0996c93c0a1231756a2561477e991016de8a4a" ], "author": { "name": "Potin Lai", "email": "potin.lai@quantatw.com", "time": "Tue Jan 09 19:59:59 2024 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Fri Jan 12 15:25:42 2024 +0000" }, "message": "meta-harma: network: add config 00-bmc-eth0.network\n\nFor Meta\u0027s machines, we use to use DUID-LL as client identifier for\nDHCPv6. We also notice that the IAID is different between AC power on\nand reset, which caused the DHCPv6 address is changed due to IAID is\nnot always consitent.\n\nAdd settings to ensure DHCPv6 selects the correct DUID type and forces\nIAID to 0 to ensure DHCPv6 address does not change between AC power on\nand reset.\n\n```\nClientIdentifier\u003dduid\nDUIDType\u003dlink-layer\nIAID\u003d0\n```\n\nSigned-off-by: Potin Lai \u003cpotin.lai@quantatw.com\u003e\nChange-Id: Ib16959f7f33de6494792eee104fb04ae7ff13eba\n" }, { "commit": "4f0996c93c0a1231756a2561477e991016de8a4a", "tree": "3a22238bfbfce1cd9c86e004e3903b1a7d34bbe0", "parents": [ "9db76818cbdcae900f5eea1b070abda29ae6784c" ], "author": { "name": "Delphine CC Chiu", "email": "Delphine_CC_Chiu@wiwynn.com", "time": "Thu Jan 11 17:44:43 2024 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Fri Jan 12 15:24:17 2024 +0000" }, "message": "meta-facebook: yosemite4: Revise i/o config for medusa board\u0027s schematic changes\n\nRevise medusa board i/o initialization for EVT schematic changes\n\nTested: Verified with yosemite4 POC/EVT medusa board\n\nChange-Id: Iae1809de1b0ada79425a59f124387b974e22d168\nSigned-off-by: Delphine CC Chiu \u003cDelphine_CC_Chiu@wiwynn.com\u003e\n" }, { "commit": "9db76818cbdcae900f5eea1b070abda29ae6784c", "tree": "fa418443ddca22ce93b55dc5999f00540f30cda8", "parents": [ "a18ba0f047e77b58b06ba3a80e9571050fc05924" ], "author": { "name": "Yang Chen", "email": "yang.chen@quantatw.com", "time": "Thu Jan 11 15:11:36 2024 +0800" }, "committer": { "name": "Yang Chen", "email": "yang.chen@quantatw.com", "time": "Fri Jan 12 17:29:54 2024 +0800" }, "message": "meta-facebook: minerva: monitor pins to record event logs\n\nAdd gpio monitor for the below types of pin to record logs:\n- Blade presence\n- Blade leak detect\n- RPU ready\n- Cable presence\n- Toggle switch\n\nChange-Id: I50e95b84fe3cd76c37c12ad69cbaafd4f7c5b974\nSigned-off-by: Yang Chen \u003cyang.chen@quantatw.com\u003e\n" }, { "commit": "f5954a988f04af4d7bd3dd1448f2b346583e92f8", "tree": "996bcf773b1f0b0431501494b6f0d221cc586d54", "parents": [ "8ac8c426cadaa0733b052243cf82d4d639c3950e" ], "author": { "name": "Potin Lai", "email": "potin.lai@quantatw.com", "time": "Thu Jan 11 09:46:11 2024 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Thu Jan 11 17:50:03 2024 +0000" }, "message": "meta-facebook: meta-harma: enable obmc-phosphor-buttons support\n\nobmc-phosphor-buttons handles button events and hsot selecting.\nIn Harma system, the actions of buttons are handled by CPLD, so only\n`HOST_SELECTOR` which needed by debug card function (fb-ipmi-oem) is\nprovided here.\n\nChange-Id: Id9cdc0f1be84377769776b218bbd3a41285f345e\nSigned-off-by: Potin Lai \u003cpotin.lai@quantatw.com\u003e\n" }, { "commit": "17bf796d9ac4b793dec768e57ddf6f9a8f85b429", "tree": "05c4151e1f18aae4bd7a04df2a4feece5e079bdf", "parents": [ "27dbef0efe1959d0a7d6457565ef4378fd987b6e" ], "author": { "name": "Delphine CC Chiu", "email": "Delphine_CC_Chiu@wiwynn.com", "time": "Mon Jan 08 18:26:45 2024 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Wed Jan 10 16:55:29 2024 +0000" }, "message": "meta-facebook: yosemite4: Fix do power policy fail problem\n\nWe found out the power policy failed after doing 12v cycle.\nBecause the 12v power on and cycles execute using pldmtool cmd,\nwe need to wait until the mctp connection is done, so it can send\ncmd to BIC normally.\n\n\nSigned-off-by: Delphine CC Chiu \u003cDelphine_CC_Chiu@wiwynn.com\u003e\nChange-Id: I519340e786a5eaf4dcb27d0eff149c137658434d\n" }, { "commit": "27dbef0efe1959d0a7d6457565ef4378fd987b6e", "tree": "b15068d0383d04a92cfa1053774f8285ebdaf0e2", "parents": [ "7831b5e15714160276e5dc49fd0432ab58e7f82a" ], "author": { "name": "Yang Chen", "email": "yang.chen@quantatw.com", "time": "Fri Dec 08 20:36:52 2023 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Wed Jan 10 16:47:28 2024 +0000" }, "message": "meta-facebook: minerva: add sol function\n\nIn the Minerva system, CMM needs to switch the UART to each MTIA blade BMC console of 16 blades on the ttyS0 by controlling the UART select pins to the CPLD.\n\nChange-Id: I094074fd27fb24627038601c67569571acf427ee\nSigned-off-by: Yang Chen \u003cyang.chen@quantatw.com\u003e\nSigned-off-by: Yi-Shum \u003cEasonChen1@quantatw.com\u003e\n" }, { "commit": "15f018161f68a422bf9f8ed6dcc75db675dae626", "tree": "13d4b7cb806ba3028d0001a2fda0be899e51bdfb", "parents": [ "2c35d0ddeedc2e3796450b72d007486be696b1b2" ], "author": { "name": "Potin Lai", "email": "potin.lai@quantatw.com", "time": "Fri Jan 05 16:03:17 2024 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Fri Jan 05 18:16:15 2024 +0000" }, "message": "meta-harma: add ipmb channels\n\nHarma using /dev/ipmb-14 to communicate with the BIC on debug card.\nAdd channel and remote-addr information for creating ipmb-channels.json\nfile.\n\nTested on Harma:\n```\nroot@harma:~# cat /usr/share/ipmbbridge/ipmb-channels.json\n{\n \"channels\": [\n {\n \"type\": \"ipmb\",\n \"slave-path\": \"/dev/ipmb-14\",\n \"bmc-addr\": 32,\n \"remote-addr\": 96,\n \"devIndex\": 0\n }\n ]\n}\n```\n\nSigned-off-by: Potin Lai \u003cpotin.lai@quantatw.com\u003e\nChange-Id: I8f1fc1e7443d6e3f79346c66f1ce900272863879\n" }, { "commit": "2c35d0ddeedc2e3796450b72d007486be696b1b2", "tree": "7879c82250b9f59d07407f5dfd49024d63ed749c", "parents": [ "885c5d0a0aa55862eef4f5020ee93472501c8eaf" ], "author": { "name": "Potin Lai", "email": "potin.lai@quantatw.com", "time": "Fri Jan 05 15:46:23 2024 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Fri Jan 05 18:16:15 2024 +0000" }, "message": "meta-facebook: fix remote-addr type in ipmb-channels.json\n\nipmbbridged only allow remote-addr as integer.\nConvert remote-addr from string to integer.\n\nTested On Harma:\n```\nroot@harma:~# cat /usr/share/ipmbbridge/ipmb-channels.json\n{\n \"channels\": [\n {\n \"type\": \"ipmb\",\n \"slave-path\": \"/dev/ipmb-14\",\n \"bmc-addr\": 32,\n \"remote-addr\": 96,\n \"devIndex\": 0\n }\n ]\n}\nroot@harma:~# systemctl status ipmb\n* ipmb.service - IPMB bridge\n Loaded: loaded (/usr/lib/systemd/system/ipmb.service; enabled; preset: enabled)\n Active: active (running) since Thu 2024-01-04 22:54:48 PST; 1h 3min ago\n Main PID: 425 (ipmbbridged)\n CPU: 4.887s\n CGroup: /system.slice/ipmb.service\n `-425 /usr/bin/ipmbbridged\n\nJan 04 22:54:48 harma systemd[1]: Started IPMB bridge.\n```\n\nSigned-off-by: Potin Lai \u003cpotin.lai@quantatw.com\u003e\nChange-Id: I9823d3e6d219737c6426880d1a9fbaa407cd9c75\n" }, { "commit": "885c5d0a0aa55862eef4f5020ee93472501c8eaf", "tree": "bfe257eaa672c156f0f53f3c4c49320636e4fb1e", "parents": [ "da988de723634d95e9a557d9e72a27e1463c0842" ], "author": { "name": "Yang Chen", "email": "yang.chen@quantatw.com", "time": "Fri Jan 05 16:32:10 2024 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Fri Jan 05 17:26:55 2024 +0000" }, "message": "meta-facebook: minerva: leds: Add led-manager config\n\nAdd LEDs for the Minerva as below list:\n heartbeat,\n power on,\n identify,\n fan fault\n\nChange-Id: Ief4283150ab39314cfb1ca9d7b6e56c0a65fe720\nSigned-off-by: Yang Chen \u003cyang.chen@quantatw.com\u003e\n" }, { "commit": "da988de723634d95e9a557d9e72a27e1463c0842", "tree": "8003721c70176a6541e722a1b8fc01e79a7d7c66", "parents": [ "85795c27f1221d1e5d4bcd3e914f03c543ee6fc8" ], "author": { "name": "Yang Chen", "email": "yang.chen@quantatw.com", "time": "Fri Jan 05 17:15:52 2024 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Fri Jan 05 17:24:49 2024 +0000" }, "message": "meta-facebook: minerva: phosphor-state-manager: Fix BMC not ready\n\nTemporary workaround for fixing some services stuck waiting for non-existing object path\n\nChange-Id: I375c5a4b010f8832c2b5101be1ed8ff2fabd6ba7\nSigned-off-by: Yang Chen \u003cyang.chen@quantatw.com\u003e\n" }, { "commit": "85795c27f1221d1e5d4bcd3e914f03c543ee6fc8", "tree": "2b15ab3854785ec1a3012f0553f92afc2510f248", "parents": [ "ac7a04b1bf608d6852d81722261b659b882d5f74" ], "author": { "name": "Yang Chen", "email": "yang.chen@quantatw.com", "time": "Fri Jan 05 22:01:37 2024 +0800" }, "committer": { "name": "Yang Chen", "email": "yang.chen@quantatw.com", "time": "Fri Jan 05 22:19:05 2024 +0800" }, "message": "meta-facebook: minerva: enable spi-gpio on kconfig\n\nEnable spi-gpio configuration for the TPM2\n\nChange-Id: I0a7aa48b53454cbe558cdfa1697a89cdfd98e248\nSigned-off-by: Yang Chen \u003cyang.chen@quantatw.com\u003e\n" }, { "commit": "ac7a04b1bf608d6852d81722261b659b882d5f74", "tree": "e3342b9c1f1b8b762703f209ac21262808b6da29", "parents": [ "a7bde9854de816cd2c55f0be195aa454ff872dfb" ], "author": { "name": "Delphine CC Chiu", "email": "Delphine_CC_Chiu@wiwynn.com", "time": "Fri Dec 22 14:43:43 2023 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Fri Jan 05 02:19:32 2024 +0000" }, "message": "meta-facebook: yosemite4: support nic reseat\n\n- Add config for phosphor-gpio-monitor to monitor nics\u0027 present.\n- If the NIC is plugged in, perform 12V cycle to the serving Hosts to\nlet the Hosts reload new NIC\u0027s information.\n\nChange-Id: I178c5ca7d2bc6b25585e907bad7494c2bb90b961\nSigned-off-by: Delphine CC Chiu \u003cDelphine_CC_Chiu@wiwynn.com\u003e\n" }, { "commit": "309918cd167f16c95dd508ac5a6afd9701470737", "tree": "05829198778db3d1209a10cf93635b5bd09d9bc5", "parents": [ "a5bb1b519246435f22a034f9040505ee7302bfdb" ], "author": { "name": "Peter Yin", "email": "peter.yin@quantatw.com", "time": "Tue Dec 19 23:50:46 2023 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Thu Jan 04 15:42:06 2024 +0000" }, "message": "meta-facebook: harma: flash:bios\n\nSupport for BIOS update.\n\nroot@harma:/tmp# ./bios-update.sh F0M_1A02.BIN\nBios upgrade started at Tue Dec 19 07:06:04 PST 2023\nPower off host server\nHost server powered off\nSet GPIO to access SPI flash from BMC used by host\nswitch bios GPIO to bmc\nset_gpio: set bmc-spi-mux-select-0 \u003d 1 success\nbind aspeed-smc spi driver\nBios image is F0M_1A02.BIN\nmtd6 is not a pnor device\nmtd6 not available\nFlashing bios image to mtd7...\nErasing block: 256/256 (100%)\nWriting kb: 16384/16384 (100%)\nVerifying kb: 16384/16384 (100%)\nbios updated successfully...\nUnbind aspeed-smc spi driver\nSet GPIO back for host to access SPI flash\nswitch bios GPIO to CPU\nset_gpio: set bmc-spi-mux-select-0 \u003d 0 success\nPlease do sled cycle.\n\nChange-Id: I9e1c8afca44abb1917fa342ee505ad38e845d192\nSigned-off-by: Peter Yin \u003cpeter.yin@quantatw.com\u003e\n" }, { "commit": "03c5e79efb8d9e4f6fe9667db27b7e707f87646c", "tree": "a6e70c88b50287c16ed8989b620957de86e8739a", "parents": [ "2e28747f368c140d45343cea8e1a58d0da052010" ], "author": { "name": "Andrew Geissler", "email": "openbmcbump-github@yahoo.com", "time": "Fri Oct 20 17:10:17 2023 -0500" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Thu Jan 04 15:28:38 2024 +0000" }, "message": "fb-ipmi-oem: srcrev bump 8713427cf5..8fe3a44723\n\nPatrick Williams (1):\n clang-format: copy latest and re-format\n\nChange-Id: I364360bf10757cf78db51086d5cbbde0ed75e1bd\nSigned-off-by: Andrew Geissler \u003copenbmcbump-github@yahoo.com\u003e\n" }, { "commit": "2e28747f368c140d45343cea8e1a58d0da052010", "tree": "8096a5c2ad6d44ebce2137a61c2ce84b376b8575", "parents": [ "42e7aff560c16d22a9d5e6d84f2d37432b937c29" ], "author": { "name": "Peter Yin", "email": "peter.yin@quantatw.com", "time": "Tue Dec 12 21:14:10 2023 +0800" }, "committer": { "name": "peter.yin", "email": "peter.yin@quantatw.com", "time": "Thu Jan 04 14:39:56 2024 +0000" }, "message": "meta-facebook: harma: phosphor-gpio-monitor\n\nAdd gpio monitor for power good, power reset button\nand post end.\n\nChange-Id: Ibd18b04eaf2db45fb12765a922ce3cbd2787e32e\nSigned-off-by: Peter Yin \u003cpeter.yin@quantatw.com\u003e\n" }, { "commit": "42e7aff560c16d22a9d5e6d84f2d37432b937c29", "tree": "747f8e226a92b2b934f2bc32c7da93c3d15869c1", "parents": [ "6c79cf784ee2388dd236a6672f851041500613bf" ], "author": { "name": "Peter Yin", "email": "peter.yin@quantatw.com", "time": "Wed Dec 06 18:17:31 2023 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Thu Jan 04 14:32:49 2024 +0000" }, "message": "meta-facebook: harma: power control support\n\nTo support power on, power off, power-cycle reset and sled-cycle.\n\nChange-Id: Ib26fbe7087d7ab2b68c61d46a7dcf3ab5f7847b0\nSigned-off-by: Peter Yin \u003cpeter.yin@quantatw.com\u003e\n" }, { "commit": "5b659899f60c7ea4e6c3df1143e60e432190d3e5", "tree": "94e73a7f30edd2d7911be648ab3cd83093215476", "parents": [ "331473560270bfb11b03cd8162b7213c3de01cad" ], "author": { "name": "Peter Yin", "email": "peter.yin@quantatw.com", "time": "Thu Dec 21 01:45:24 2023 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Thu Jan 04 13:37:17 2024 +0000" }, "message": "meta-facebook: harma: usb-net\n\nSetting the USB network address for SITV.\n\nChange-Id: Ice43dfbb230ec5a97f73449dc1460e75e2d8d9dc\nSigned-off-by: Peter Yin \u003cpeter.yin@quantatw.com\u003e\n" }, { "commit": "331473560270bfb11b03cd8162b7213c3de01cad", "tree": "d61298586d5bfac6f91d52520fe4d719d135ab8c", "parents": [ "3a36a0f215c6143126315b48be23681a7c106f39" ], "author": { "name": "Peter Yin", "email": "peter.yin@quantatw.com", "time": "Wed Dec 06 18:08:31 2023 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Thu Jan 04 13:18:47 2024 +0000" }, "message": "meta-facebook: harma: initrdscripts\n\n1.Enable ESPI register\n2.Disable WDT2 for Dual image.\n\nChange-Id: Id3dc4cefeb10b58b5bb24f6ac5470e82758b4b5a\nSigned-off-by: Peter Yin \u003cpeter.yin@quantatw.com\u003e\n" }, { "commit": "3a36a0f215c6143126315b48be23681a7c106f39", "tree": "e3b6829689ec9c513c69a7cb3df6d6df393d71b0", "parents": [ "a01b4dd3935ae229262ce44b1dbb4212c58e07ca" ], "author": { "name": "Delphine CC Chiu", "email": "Delphine_CC_Chiu@wiwynn.com", "time": "Wed Dec 20 09:07:16 2023 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Thu Jan 04 03:11:25 2024 +0000" }, "message": "meta-facebook: yosemite4: Support power policy\n\nThere are three power policy options: AlwaysOn, AlwaysOff, and Restore.\nAfter the system AC returns, the service `phosphor-discover-system-state`\nwould get the property `PowerRestorePolicy` under `/xyz/openbmc_project/\ncontrol/host{id}/power_restore_policy` to do its power policy.\n\nThe power policy also needs to be done after chassis power returns. Support\nrestarting the `phosphor-discover-system-state` service for doing the policy\nafter the chassis power on and cycle.\n\nTested: tested on yv4 system.\n\nChange-Id: I3412741cd25aff1e980b377a9af16606314e6965\nSigned-off-by: Delphine CC Chiu \u003cDelphine_CC_Chiu@wiwynn.com\u003e\n" }, { "commit": "c0f46c685167b95adf338dbfea4228848a81a3b5", "tree": "5f7db5059d6de6092e558ebfcdec82c65dd24809", "parents": [ "48b17067745b04a982a644816d41e853b59efcbf" ], "author": { "name": "Yang Chen", "email": "yang.chen@quantatw.com", "time": "Wed Dec 20 20:47:41 2023 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Tue Jan 02 15:44:38 2024 +0000" }, "message": "meta-facebook: minerva: dbus-sensors: initial commit\n\nInitial commit the configuration of dbus-sensors use in the Minerva.\n\nChange-Id: I798d995ffec285ded6aaa56f65bc4d2deb28b0b8\nSigned-off-by: Yang Chen \u003cyang.chen@quantatw.com\u003e\n" }, { "commit": "48b17067745b04a982a644816d41e853b59efcbf", "tree": "0c7c50525974881013ec6c6ac6c21708f177596a", "parents": [ "f3e6eaad0e766226c4a1de1efbbc8eefed4d3d20" ], "author": { "name": "Delphine CC Chiu", "email": "Delphine_CC_Chiu@wiwynn.com", "time": "Fri Dec 22 15:26:47 2023 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Tue Jan 02 13:25:48 2024 +0000" }, "message": "meta-facebook: yosemite4: Add bios version properties\n\n- Add bios version \u0026 after activated bios version in phosphor-settingsd.\n\nChange-Id: If617ffb587b2f45411483dda655d7a0ce99105e2\nSigned-off-by: Delphine CC Chiu \u003cDelphine_CC_Chiu@wiwynn.com\u003e\n" }, { "commit": "f3e6eaad0e766226c4a1de1efbbc8eefed4d3d20", "tree": "65e2cf773542ccca90b400345b8708bc5a27096d", "parents": [ "18258f0c2035734d41a13d34626984132c91f715" ], "author": { "name": "Peter Yin", "email": "peter.yin@quantatw.com", "time": "Thu Dec 21 15:45:25 2023 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Tue Jan 02 13:24:48 2024 +0000" }, "message": "meta-facebook: harma: enable SPI-GPIO in kconfig\n\nAdd spi gpio from tpm2\n\nChange-Id: Id6b82fc29a01ec327cc50a9edbde0810d28f15ea\nSigned-off-by: Peter Yin \u003cpeter.yin@quantatw.com\u003e\n" }, { "commit": "18258f0c2035734d41a13d34626984132c91f715", "tree": "4f79b6d8c085a0805f119c59aa61dc49c190ebf8", "parents": [ "acae1a1a9fe3a1bdeef3d7546385c48172c6202a" ], "author": { "name": "Potin Lai", "email": "potin.lai@quantatw.com", "time": "Fri Dec 29 00:33:33 2023 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Tue Jan 02 12:57:40 2024 +0000" }, "message": "meta-facebook: add ability to set remote-addr in ipmb config\n\nSome platforms will need to assign different remote-addr for each\nchannel. Add a IPMB_REMOTE_ADDR for assigning remote-addr for each\ncorresponding channel instead of assign fixed remote-addr to all\nchannels.\n\nIf the size of IPMB_REMOTE_ADDR not consistent and less than the size\nof IPMB_CHANNEL, the remote-addr will be filled with 64 for the\nchannels does not assigned.\n\nTest results of tiogapass:\n```\n{\n \"channels\": [\n {\n \"type\": \"ipmb\",\n \"slave-path\": \"/dev/ipmb-4\",\n \"bmc-addr\": 32,\n \"remote-addr\": \"44\",\n \"devIndex\": 0\n },\n {\n \"type\": \"ipmb\",\n \"slave-path\": \"/dev/ipmb-9\",\n \"bmc-addr\": 32,\n \"remote-addr\": \"96\",\n \"devIndex\": 1\n }\n ]\n}\n```\n\nSigned-off-by: Potin Lai \u003cpotin.lai@quantatw.com\u003e\nChange-Id: I785201c2c643cf6aa7b83e61df9601ae581f34ad\n" }, { "commit": "7c0e43dbf089d8ec615de14efcda24483fa67ad9", "tree": "037ad5cf7e6b524ad54f90a4853b457acc795217", "parents": [ "c3490a13c8e85a92e037139f5d105fc10849db1e" ], "author": { "name": "Peter Yin", "email": "peter.yin@quantatw.com", "time": "Thu Dec 21 21:58:26 2023 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Sat Dec 23 21:04:15 2023 +0000" }, "message": "meta-facebook: tiogapass: powerctrl\n\nThe setup_gpio.sh, power service, and power-util are not applicable to\nall platforms. They will be moved to the tiogapass platform layer.\nThe setup_gpio.sh uses exported GPIO, which can impact the libgpio\nfunction.\n\nChange-Id: I7a95f8a5466f220d3c5fb8aadb2507d0f23ce857\nSigned-off-by: Peter Yin \u003cpeter.yin@quantatw.com\u003e\n" }, { "commit": "af8784d56621752c190087606c8f8b8ba2470e86", "tree": "c3dcab492e182650fa9a3858d7eff392a49a05a0", "parents": [ "acd0a499bf263b0f9f2657342f2d2efee4c778ae" ], "author": { "name": "Peter Yin", "email": "peter.yin@quantatw.com", "time": "Wed Dec 13 00:09:48 2023 +0800" }, "committer": { "name": "peter.yin", "email": "peter.yin@quantatw.com", "time": "Mon Dec 18 16:24:20 2023 +0000" }, "message": "meta-facebook : harma: linux: Add kernel config\n\nGet MAC address from NIC\nCONFIG_NCSI_OEM_CMD_GET_MAC\u003dy\n\nIPMB device\nCONFIG_IPMB_DEVICE_INTERFACE\u003dy\n\nUSB Net:\nIt is only for SITV BMC testing until the Aegis board is produced.\nCONFIG_USB_NET_DRIVERS\u003dy\nCONFIG_USB_USBNET\u003dy\nCONFIG_USB_NET_CDCETHER\u003dy\nCONFIG_USB_NET_CDC_NCM\u003dy\nCONFIG_USB_NET_CDC_SUBSET_ENABLE\u003dy\nCONFIG_USB_NET_CDC_SUBSET\u003dy\n\nSensors\nCONFIG_AD5272\u003dy\nCONFIG_SENSORS_PT5161L\u003dy\nCONFIG_SENSORS_XDPE152\u003dy\nCONFIG_SENSORS_ISL68137\u003dy\nCONFIG_SENSORS_LTC4286\u003dy\nCONFIG_SENSORS_MAX31790\u003dy\n\nChange-Id: Id5e5dbc918a1421cb7d2d83ecc9e0b6da98232de\nSigned-off-by: Peter Yin \u003cpeter.yin@quantatw.com\u003e\n" }, { "commit": "acd0a499bf263b0f9f2657342f2d2efee4c778ae", "tree": "09db3652be81a5e736b5f1c716ddd8291c72517e", "parents": [ "1a30877a4ea25bc23d2e07f9cba8d1650ce7134a" ], "author": { "name": "Peter Yin", "email": "peter.yin@quantatw.com", "time": "Wed Dec 13 12:55:13 2023 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Fri Dec 15 19:03:28 2023 +0000" }, "message": "meta-facebook:harma:ipmi remove ipmi softoff\n\nRemove it to avoid block power off.\n\nChange-Id: I60d5f0bada9088bd241686c4c74d45eac3796902\nSigned-off-by: Peter Yin \u003cpeter.yin@quantatw.com\u003e\n" }, { "commit": "1a30877a4ea25bc23d2e07f9cba8d1650ce7134a", "tree": "b6dd2dfa2a74d33b99c4c24b98ddf301e1bdceed", "parents": [ "4a8493b53a82424b1cf16c024bf71c29cbab9381" ], "author": { "name": "Potin Lai", "email": "potin.lai@quantatw.com", "time": "Wed Dec 13 19:17:12 2023 +0800" }, "committer": { "name": "Patrick Williams", "email": "patrick@stwcx.xyz", "time": "Fri Dec 15 19:03:17 2023 +0000" }, "message": "meta-facebook: harma: obmc-console: setup host uart routing\n\nIn harma system, the host console diagram as below.\n\n```\n ┌──────────────┐\n │ Host Console │\n └┬─────────────┘\n │\n┌─┼──────────────────────────┐\n│ │ │\n│ │ ┌───────┐ ┌───────┐ │ ┌──────────────┐\n│ ├─┤ UART1 ├─────┤ UART4 ├──┼──┤ obmc-console │\n│ │ └───────┘ │(ttyS2)│ │ │ (SOL) │\n│ │ └───────┘ │ └──────────────┘\n│ │ │\n│ │ ┌───────┐ ┌───────┐ │ ┌───────────────┐\n│ └─┤ UART2 ├─────┤ IO1 ├──┼──┤ Debug Console │\n│ └───────┘ └───────┘ │ └───────────────┘\n│ │\n└────────────────────────────┘\n```\n\nAdd an extra config for setting uart routing of host console.\n- uart1 \u003c--\u003e uart4\n- io1 \u003c--\u003e uart2\n\nSigned-off-by: Potin Lai \u003cpotin.lai@quantatw.com\u003e\nChange-Id: I3b99b6b834d4ec1c4152c018c5a0e39230eec415\n" } ], "next": "4a8493b53a82424b1cf16c024bf71c29cbab9381" }